Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

d17

Welcome Guest, Log in or Register
Author 
jk

06-19-2005 08:51:22




Report to Moderator

does a d17 series 1 and series 4 both take the same spring on the governer? i assume that series 2 and 3 would take the same too. i'm looking to adjust my C govnoner to 1650 rpm and some one told me i could put a d17 govoner spring on it and get it pretty close.




[Log in to Reply]   [No Email]
LWD

06-20-2005 00:32:44




Report to Moderator
 Re: d17 in reply to jk, 06-19-2005 08:51:22  
Its quicker to adjust the carb. linkage, the shorter the rod to the carb. the more rpms, or losing the carb. arm and turn it clock wise a little and re tighten.



[Log in to Reply]  [No Email]
jk

06-25-2005 06:47:00




Report to Moderator
 Re: d17 in reply to LWD, 06-20-2005 00:32:44  
a friend of mie told me how to adjust the gov. like that, but when some one told me i might be able to just change a spring i thought that might be faster.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy