TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum

HD7 info, please.

Welcome Guest, Log in or Register

Author

scott in wa.

05-13-2005 10:00:29

Report to Moderator

HD7 3-71 (1949, 50) (big)..
Look at it again last night.
Missing starter, and generator, also inspection plates on block, front idler. 64 in center to center on rear sprockets
26.00 Front idler diameter.
I could not read serial number on dozer.
Left track is off, 8ft 2 in front blade width.
Motor is stuck.
Probably needs good rollers on left side.

1. What does go on the left side of engine?
Starter, gen, oil pressure sending unit????

2. Has a huge winch on it (big)
Carco Model F Serial number
2860f4
Does some one know something about this winch???

3. There is a fuel line that is under the seat, it is disconnected there, what was hooked up there??? (Filter)??

What�s it worth, $300 to $600??
I believe I can break the 3-71 loose, (been there done that)
But the track that is off is HUGE..

what do you think???
thanks
much

[Log in to Reply] [No Email]

Tim Butcher

05-20-2005 19:33:30

Report to Moderator

Re: HD7 info, please. in reply to scott in wa., 05-13-2005 10:00:29

Hey,Scott Sounds like it ought to be worth what you mentioned,if it's close to you. I'd not mind having something like that at my house,but I'm in WV. I've got an HD6G that I use(when it isn't down,like now) and an HD7G for pieces. They're both loaders and some of the parts will interchange,but they are two distinctly different machines.I've got 3500 in the 6 and 1000 in the parts machine. I'd have to say that after paying 120 for a fan blade,3/600 for a whole machine sounds like a steal. Good luck w/it!

[Log in to Reply] [No Email]

4D2Ken

06-15-2005 15:43:41

Report to Moderator

Re: HD7 info, please. in reply to Tim Butcher, 05-20-2005 19:33:30

Tim,

You wouldn"t happen to have a useable hydraulic pump on that HD7 by chance P/N 600663? Mine is wore out and I am having a heck of a time locating a replacement.

Thanks

4D2Ken

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy