Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

Polarizing 6V Regulator

Welcome Guest, Log in or Register
Author 
MarksD14

04-13-2005 06:52:38




Report to Moderator

I have been told I need to polorize a new regualtor on my D14. Is this correct and what is the proper proceedure? If done wrong, can it fry the regulator? Thanks.




[Log in to Reply]   [No Email]
Don Dittmar

04-13-2005 13:00:02




Report to Moderator
 Re: Polarizing 6V Regulator in reply to MarksD14, 04-13-2005 06:52:38  
got me on this one, but steve at B&B should be able to help me.



[Log in to Reply]  [No Email]
steve(ill)

04-13-2005 15:51:18




Report to Moderator
 Re: Polarizing 6V Regulator in reply to Don Dittmar, 04-13-2005 13:00:02  
turn on the key--- touch the B and A terminals on the voltage regulator together with a jumper for 1 second--- see a couple small sparks. now start the tractor with jumper removed. --- make sure the regulator has a good ground to the tractor frame.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy