Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

Pics of my nearly finished G

Welcome Guest, Log in or Register
Author 
souNdguy

02-16-2005 06:53:02




Report to Moderator

third party image

profile




[Log in to Reply]   [No Email]
souNdguy

02-16-2005 06:59:16




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:53:02  
third party image

engine



[Log in to Reply]  [No Email]
souNdguy

02-16-2005 06:58:29




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:53:02  
third party image

Stack style non oem muffler



[Log in to Reply]  [No Email]
souNdguy

02-16-2005 06:57:34




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:53:02  
third party image

right shortened fender and improvised starter rod



[Log in to Reply]  [No Email]
souNdguy

02-16-2005 06:56:33




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:53:02  
third party image

left shortened fender and improvised choke rod



[Log in to Reply]  [No Email]
ShepFL

02-16-2005 18:23:36




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:56:33  
Wow!!
That is good looking. Why the shortened fenders?
Also got the hyd pics!
Thanks,



[Log in to Reply]  [No Email]
souNdguy

02-16-2005 20:33:20




Report to Moderator
 Re: Pics of my nearly finished G in reply to ShepFL, 02-16-2005 18:23:36  
Shortened fender you ask?

3 fold answer.

1, I couldn't find a good set of regular fenders. The ones I ran across were onsies.. and then they were bent or rusted pretty badly.

Also i had seen a few pics with shortened fenders, and kinda liked them.. then I ran across a guy selling some used parts and low and behold.. he had a set of the shorties.. no rust holes.. and very minor pitting. Priced very low.. I did have to dress the edge where the previous owner cut them ( nibbler? ).. but 5 minutes with a file and delicate use of a die grinder and they contoured out nicely...did I mention very low price?

I soppose I could/should find a 'oem set.. but then.. I kinda like the shorties now.. same with the muffler stack. I got a pancake one setting in a box.. but the stack is 'impressive' looking for that 10hp motor..

Soundguy

[Log in to Reply]  [No Email]
Tim Shultz

02-16-2005 11:47:11




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:56:33  
got your self a nice lookin unit,I work for a dairy farmer, got all most every thing but a G,
was thinking of geting one for my moms garden, what do you think?



[Log in to Reply]  [No Email]
souNdguy

02-16-2005 06:55:33




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:53:02  
third party image

lamo



[Log in to Reply]  [No Email]
souNdguy

02-16-2005 06:54:47




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:53:02  
third party image

bat box



[Log in to Reply]  [No Email]
souNdguy

02-16-2005 06:54:00




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:53:02  
third party image

rear



[Log in to Reply]  [No Email]
Lugnut

02-16-2005 09:15:55




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:54:00  
Sounder--I sure do admire you. You get things done and done right. I can spend 3 years just fixing my brakes and then they'll leak.~~~~Lugnut
( getting a welder tomorrow)



[Log in to Reply]  [No Email]
Phill Snartland

02-16-2005 09:05:32




Report to Moderator
 Re: Pics of my nearly finished G in reply to souNdguy, 02-16-2005 06:54:00  
Hi,
I've been following your photo record with a lot of interest. I'm curious about a couple of the photos in this posting. Why was it necessary to make "improvised" choke and starter controls? What did the Model G have as stock? I see a small instrument panel on the right side of the engine - weren't those controls located there? Just curious.
Thanks for the photos, it's been really fun looking at them!
Phill

[Log in to Reply]  [No Email]
souNdguy

02-16-2005 11:32:10




Report to Moderator
 Re: Pics of my nearly finished G in reply to Phill Snartland, 02-16-2005 09:05:32  
The G did have it's 'dash' back under the hood with an ammeter and lamp switch that was also a resistance switch for the D/R generator.

The G also had 'pull rods' for the choke and the starter. These rods went thru the fenders with finger rings on them. The choke rod, as far as i can tell hooked directly to the choke linkage flap on the carb. The starter rod hooks to a rocker cam on the starter switch and also goes up thru the fender with a finger ring. Thing is.. its hard to find them still with the original rods on them.. let alone fenders.

The previous owner of my G took a wooden 'file' handle and slit it on the starter switch cam, and you just lifter up on the handle to start it, while reaching around the engine holding the choke open on the carb...

Therefore I went anf got some 1/8 rod, measured it.. bent the finger loops around a 1.25" round stock.. welded the loop closed, primed and painted them, then installed them and attatched them to the starter and choke.

Soundguy

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy