Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

WD,WD45 Hand clutch

Welcome Guest, Log in or Register
Author 
WD-FarmerBob

07-09-2004 20:23:50




Report to Moderator

I have climed on and off those side sitters many times and every time I have disengaged that hand clutch lever. Just the other day I used that hand clutch to Pull a John Deere with an 8 foot chopper out of the ditch he was mowing with. It was sure smother than that foot clutch would have been. By the way this fellow cash rents from us,and was a little embaresed, he did not think I could do it. I agree with Butch and Bill.

[Log in to Reply]   [No Email]
lee

07-12-2004 21:35:04




Report to Moderator
 Re: WD,WD45 Hand clutch in reply to WD-FarmerBob, 07-09-2004 20:23:50  
I use ours for baling hand clutch great when you get in heavy winrow or slugs



[Log in to Reply]  [No Email]
Ron

07-10-2004 09:00:30




Report to Moderator
 Re: WD,WD45 Hand clutch in reply to WD-FarmerBob, 07-09-2004 20:23:50  
I had to go back and pull a Dozer out that was "Hung-up"...maybe a 350 dozer....good sized.. I had been working ground with my WD-45, and had the duals on it... I pulled him right out..!!! He was surprised, too..!! I sold a '52 JD "B" to a friend, and he told me about a neighbor who had an Oliver 88 stalled-dead starter- with a no-till drill IN the ground... Chris hooked the "B" to it and not only pulled the 88 AND the no-till, but started it, too..!! We got that one New, and it was never worked on.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy