Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

Swathboard for B/C Sickle Mower

Welcome Guest, Log in or Register
Author 
Rod (NH)

05-02-2004 11:04:15




Report to Moderator

I finished my replacement swathboard today. It is made of 13/16" thick red oak. The grass stick is a 1-1/8" diameter hardwood dowel that is 31" OAL. Here's what it looks like with the hardware installed:

third party image

For those who do not have an original to go by and would like to make one for their B/C mower, here's a measured drawing in pdf format. I like to keep the grass stick running high so I do not bother to drill the upper two stick adjustment holes shown. The grass stick angles inward about 10 deg from the inside surface of the swathboard. This angle doesn't show well in the photo. It is fixed by the stick mounting hardware.

third party image Rod

[Log in to Reply]   [No Email]
Bob H nw Oh

05-03-2004 14:59:08




Report to Moderator
 Re: Swathboard for B/C Sickle Mower in reply to Rod (NH), 05-02-2004 11:04:15  
Nice Job!!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy