Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Allis Chalmers Discussion Forum
:

Allis Chalmer G Grader Blade

Welcome Guest, Log in or Register
Author 
Jim Abrahamson

04-13-2004 08:12:24




Report to Moderator

I am looking for information on a grader blade for a 1952 AC G. I have been told that they made a blade that is positioned at the center of the tractor. I have not been able to find any information on the web. I would also like to know where I could purchase a blade




[Log in to Reply]   [No Email]
Dan Spencer

04-13-2004 12:12:06




Report to Moderator
 Re: Allis Chalmer G Grader Blade in reply to Jim Abrahamson, 04-13-2004 08:12:24  
Hi,
I have a G sales video that shows a blade in action. It is forward of the tractor, mounted by long bars back to the engine frame area.
I have a picture of my homemade blade on this site. Just go down the photos list for all tractors. Doesn't show up on an Allis search. ( I didn't put Chalmers in the title ).
I made it out of a 42" lawn tractor blade.



[Log in to Reply]  [No Email]
Roger A. NY

04-13-2004 12:01:17




Report to Moderator
 Re: Allis Chalmer G Grader Blade in reply to Jim Abrahamson, 04-13-2004 08:12:24  
Jim, I have a blade that came with my '49 G (not for sale) that was suppose to go on my G but I can't figure how it is suppose to attatch, but then I haven't figured out how to post a picture of it in the archive either. I have seen a couple of pictures of Gs with a blade on but were so distant that I could not tell how it mounted. I also got a manual that has a lot of G implements in it but nothing on the blade. I know this manual dos not have all implements as it does not show a rear mounted land plow but I have seen pictures of these also. A fellow had pictures of a G that he had bought with a blade but I don't think this was factory as it looked to be mounted to cultivator shanks. Sorry, I don't know where you can buy one! Best of luck! Roger

[Log in to Reply]  [No Email]
jrost

02-09-2005 10:31:43




Report to Moderator
 Re: Re: Allis Chalmer G Grader Blade in reply to Roger A. NY, 04-13-2004 12:01:17  
I have been looking for a blade for my G for a while & not being able to find one, designed one that would be center mount. It will use a King Kutter Blade (available at Atwoods, Orschlins) with 3 point cut off & a new center mount. It will have lifting lugs for manual lift arms & arms to back mounting lugs on trans housing. I am planning on selling kits if there is any interest. Email @ Retool@valonnet.com

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy