Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Building 185 pulling tractor

Welcome Guest, Log in or Register
Author 
Larry Wright

05-06-1999 17:18:22




Report to Moderator

I am in the midst of putting together a 185 for the 4500lb and up farm, hobby stock, and superstock classes. I was just wondering if anyone would be kind enough to maybe lend me a little bit of good advice,thanks.




[Log in to Reply]   [No Email]
AL

05-10-1999 15:02:44




Report to Moderator
 Re: building 185 pulling tractor in reply to Larry Wright, 05-06-1999 17:18:22  
FIRST REPLACE YOUR CAST IRON STEERING HOUSING WITH PLATE STEEL SECOND 38' REAR TIRES THIRD ROLL BACK AXLE HOUSINGS ONE HOLE FORTH ALUMINIZE EVERYTHING ELSE BECAUSE YOU STILL WEIGH A TON TOO MUCH



[Log in to Reply]  [No Email]
Larry

05-11-1999 15:38:54




Report to Moderator
 Re: Re: building 185 pulling tractor in reply to AL , 05-10-1999 15:02:44  
Thanks for the advice Al, but my tractor already weighs 4400 lbs. with me on the seat. A 185 is a pretty light tractor. And to meet farmstock rules my PTO works along with the hydraulics, thanks for the help though.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy