Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

New spark plug gap after electronic conversion?

Welcome Guest, Log in or Register
Author 
Jerry

03-20-2004 09:31:19




Report to Moderator

On the AC WD 12 V conversion I have used the pertronix ignition parts in the points to electronic conversion.
What is the correct spark plug gap?
I can't seem to find the answer in the archives.
Thanks for the help,
Jerry




[Log in to Reply]   [No Email]
Doug in OR

03-20-2004 12:22:10




Report to Moderator
 Re: New spark plug gap after electronic conversion in reply to Jerry, 03-20-2004 09:31:19  
I'd recommend .040 .... I read that somewhere.. but I can't recall where. I think it was somewhere in the Pertronix web pages, but can't remember at the moment.



[Log in to Reply]  [No Email]
Doug in OR

03-20-2004 14:41:59




Report to Moderator
 Re: Re: New spark plug gap after electronic conver in reply to Doug in OR, 03-20-2004 12:22:10  
I just found the answer. Pertronix recommends that you increase your gap by .005 over factory recommendation.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy