Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

WD-45 with Power Steering

Welcome Guest, Log in or Register
Author 
Neal

03-19-2004 07:05:29




Report to Moderator

Can anyone tell me about the power steering on the WD45's. My dad has a 45 that the power steering is a large housing mounted above the belt pulley area. I have just purchased a 45 that has the Char-lynne (?) unit. Can anyone tell me why there were different power steering units used? and is there any information out there about these two different units?

Any information is appreciated.

Thanks

[Log in to Reply]   [No Email]
Tom Westerfield (W. Ky)

03-20-2004 04:10:25




Report to Moderator
 Re: WD-45 with Power Steering in reply to Neal, 03-19-2004 07:05:29  
I have a 45 with the factory steering. Its a dream. The large unit near the pulley is factory. The reserve tank is mounted just front of center on the right side of the hood. The pump is mounted on a special bracket on the left front, attached to the block and water pump. A single belt drives the PS, generator, fan/pump.



[Log in to Reply]  [No Email]
John (C-IL)

03-19-2004 18:13:41




Report to Moderator
 Re: WD-45 with Power Steering in reply to Neal, 03-19-2004 07:05:29  
The one on your father's tractor is a factory unit. The Char-lyn is an after market unit. I have the Char-lyn unit on one of my tractors but I don't have experience with the factory unit.



[Log in to Reply]  [No Email]
Joe

04-07-2004 05:22:12




Report to Moderator
 Re: Re: WD-45 with Power Steering in reply to John (C-IL), 03-19-2004 18:13:41  
Hello John,

Saw that you had the charlynn unit. I am currently mounting the unit on our allis wd - iam looking for some good locations and suggestions on mounting the power steering charlynn unit. If you have some ideas that would be very helpful. Thanks - Joe



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy