Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

Mod B cyl sleve O rings

Welcome Guest, Log in or Register
Author 
Ted

02-29-2004 08:34:07




Report to Moderator

I have torn my 48 B down and pulled the sleves. Everything checks out and I am going to put it back together. When I checked all the parts, everything mic'd to factory standards. So I ordered new piston rings and sleve O rings, gasket set, and thought I was ready to go. When I got the O rings, I noticed they did not look right. I checked my parts book and they are the ones listed. the ones that got sent to me are about 1/8" diamiter. The ones on the sleves I took out are 3/16" flat wide, like a rubber band. When I looked at the parts numbers on the pistons, rods, and crank, none of them are listed as good parts in my parts book. However they are all marked with the Allis casting mark. Has any one ever run into this? I understand that a round O ring will flatten out, but I just dont know how a 1/8" dia ring will flatten to 3/16"x1/8".....to me the math does not work out. Help..... .Thanks, Ted

[Log in to Reply]   [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy