Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Allis Chalmers Discussion Forum
:

WC with implements

Welcome Guest, Log in or Register
Author 
Dan

02-22-2004 10:43:35




Report to Moderator

I have a 1936 WC with a full set of two row cultivators and a two bottom trailor plow, Everything is in great shape and the tractor runs good. What would be a good price for everything, I have someone interested.

Thanks




[Log in to Reply]   [No Email]
Morris

03-11-2004 04:44:44




Report to Moderator
 Re: WC with implements in reply to Dan, 02-22-2004 10:43:35  
Dan

If you haven't sold your tractor by now I would be interested in knowing where and how far from Iowa you are. If you did sell please send how much you got I am looking for this kind of package. thanks Ben



[Log in to Reply]  [No Email]
jed

02-25-2004 09:51:39




Report to Moderator
 Re: WC with implements in reply to Dan, 02-22-2004 10:43:35  
I sold my 1936 WC, which was decent for $800. I would think that $800 to $1000 ought to be in the correct range. They aren't real desirable in my area.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t ... [Read Article]

Latest Ad: Wanted 13x28 power adjust rim for D 17 allis in NE Nebraska [More Ads]

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy