Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

box clamp on my G single row cultivator

Welcome Guest, Log in or Register
Author 
Rob Shay

02-11-2004 16:21:29




Report to Moderator

My buddy is restoring his "G" tractor. It has been fun tracking down all the parts. I am only missing the "box clamp" (part# 70316544)(NLA from factory). On the single row cultivator, there are 2 arches used to control the width of the implement. These arches are held in place by 2 box clamps, we are missing 1. I could have one made, but then that wouldn't be original equipment and would decrease the value of our project. Can anyone help?? email me: [email protected]

[Log in to Reply]   [No Email]
JOHN KAELIN

02-14-2004 14:41:02




Report to Moderator
 Re: box clamp on my G single row cultivator in reply to Rob Shay, 02-11-2004 16:21:29  
I sure wish I knew what the part looks like your talking about I just took a 1 roll culivator OFF my G



[Log in to Reply]  [No Email]
john

02-12-2004 13:06:15




Report to Moderator
 Re: box clamp on my G single row cultivator in reply to Rob Shay, 02-11-2004 16:21:29  
Buddy I looked there isn't any such part number!!!!! !!!!!



[Log in to Reply]  [No Email]
den/southern illinois

02-12-2004 16:52:04




Report to Moderator
 Re: Re: box clamp on my G single row cultivator in reply to john, 02-12-2004 13:06:15  
My G implement books calls it part # 316544. Not sure if that includes the setscrew which is part # 911705 I don't know if I have an extra one or not...will try to remember to check tomorrow. Den



[Log in to Reply]  [No Email]
Rob Shay

02-13-2004 05:31:07




Report to Moderator
 Re: Re: Re: box clamp on my G single row cultivato in reply to den/southern illinois, 02-12-2004 16:52:04  
Den, I appreciate your checking this out for me! I'll look forward to your reply as to wether or not you have one. Thanks!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy