Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

WD Electrical help from the discussion board.

Welcome Guest, Log in or Register
Author 
Wayne

02-03-2004 11:57:51




Report to Moderator

Hi Steve,
>You wrote (my follow up below):
>The 1100691 Delco you have sounds like it's >a 10SI (internal regulated) unit. The 42A >stamped in the case means it's a 42Amp >unit. Some of the early 1100 series units >were released in the early 1970's. I'm not at >the shop right now to varify that unit's model >number, but I would bet it's an internal >regulated version. That 42 amp will be more >than enough for what you need for your >application. If you have a bracket, along with >the Alternator, you could switch over to a 12V >neg. grd. system. Duey has some great >diagrams for folks who want to wire up their >machines themselves. The starter will work >fine providing you don't crank on it for long >periods of time. If your WD is equipped with >lights, use a 12V light switch to handle the >faster current load, along with an optional >Voltmeter for easier monitoring of the >charging system. We carry a full line of >switches, electrical parts, and design and >build 12V wiring systems if you need >anything or if you need any more help. Drop >us a line or give us a call. Be glad to help ya >out!..
>Steve/B&B Custom Circuits
>(973) 697-5747 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- --
Thanks Steve, Dueys site has been a big help and your site has also been very informative with this alternator dilemma, as well as other information that I am adding to a more complete manual. I am unsure of all the varied alternator/regulator comments and cannot come across any more definative info on the internal/external regulator issue. Thanks for your offer to help.
I do like the electronic ignition information I received and will pursue that route.
I am a graphic designer from Portland, OR. that has relocated to a small farm in eastern Oregon (still kept my client base though...don't quit your day job right?).
The AC WD was sold to me by an "honest" (his words) used car salesman along with other promises. Even still, I am very excited about owning the WD as well experiencing the new secluded (aka non-city) lifestyle.
Thanks to all,
Wayne

[Log in to Reply]   [No Email]
Steve in N.J.

02-03-2004 19:30:04




Report to Moderator
 Re: WD Electrical help from the discussion board. in reply to Wayne, 02-03-2004 11:57:51  
Wayne,
Your very welcome! Glad to be of some assistance to you. Good Luck with that WD and enjoy it!! Send us your mailing address and we'll shoot you out our newest catalog. It'll give you an idea of what we have to offer to AC owners like yourself. Makes good reading in the bathroom! LOL!!
Steve/B&B Custom Circuits



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy