|
| |
| Allis Chalmers Discussion Forum |
Timing a '39 B
| Author |
|
|
Chris (OR)
11-17-2003 15:45:45
|
Well I am slowly making progress on putting the engine on B back together.... But I would like confirmation on something....The governor gear has a punch mark on a tooth but also it looks to have a '0' that is poorly cast in (closer to the center of the gear) but it could just be a defect. The book states to line up the mark with the'o' on the cam gear. It was clear when I took it apart but now it's a bit fuzzy.... Do I want it on the questionable 'o' or the '.' They are about 3 teeth apart... (The cam is out of different tractor and has only a '/' and 'o' mark on it. They are 180 degrees apart.... No '.' marks like my old cam gear) Thanks
Chris Horn
Scappoose Oregon
|
|
|
|
|
Dick L
11-17-2003 19:25:05
|
|
Re: Timing a '39 B in reply to Chris (OR), 11-17-2003 15:45:45
|
|
| |
This picture and the next three might help.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
John Deere 71 planter parts. Hoppers, press wheels, sprockets, tons of plates and lots of other misc. Would like to sell as a package but might sell individually. Can text pictures.
[More Ads]
Copyright © 1997-2022 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
