Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

looking for a 175 cam shaft

Welcome Guest, Log in or Register
Author 
mark

11-11-2003 20:44:39




Report to Moderator

i am looking for a 175 cam shaft thank you




[Log in to Reply]   [No Email]
legn4

11-12-2003 12:17:45




Report to Moderator
 Re: looking for a 175 cam shaft in reply to mark, 11-11-2003 20:44:39  
Mark, I was to it aint going to happen.What I did was send mine (D17 ser3) to Bullet Cam in Olive Branch , Miss. & had it reground, cost $125 plus shipping.Ask for Sonny!!!! he can grind to farmuse/stock+ or HOT if you tell him what you are wanting. Farm/stock+ is suppose to be a little better than a stock 175 gas.
My local A/C dealer said about 95% of the 175 where diesal. A new 170 cam (D17 ?) was $800+ not from me. Next sring I will tell ya how the old WD45 runs! Hope this helps. Eddie

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy