| |
Allis Chalmers Discussion Forum |
Sleeving Allis G engine
Author |
|
AWB
09-28-2003 07:01:22
|
I have a set of standard pistons that show very little wear. The block needs to be rebored and sleeved as it is out beyond standard. What is a customary and reasonable cost to have this done? Thanks, AWB.
|
|
|
Don LC
09-29-2003 21:32:13
|
Re: Sleeving Allis G engine in reply to AWB, 09-28-2003 07:01:22
|
|
You can get this job done at some auto supply with a machine shop,but NAPA sells parts for that engine .......
|
|
|
Ronnie in TX.
09-28-2003 19:01:09
|
Re: Sleeving Allis G engine in reply to AWB, 09-28-2003 07:01:22
|
|
Pistons or in stnd.,.030" ,.040",.060"
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
John Deere Tires And Rims, (1) Set Of Duals, Axle Mounting Hubs, Tire Size 18.4-38, Units Are Off Of A John Deere 4440 Tractor, Year Is Unknown
[More Ads]
Copyright © 1997-2022 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|