TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum

wc spoke wheels

Welcome Guest, Log in or Register

Author

steve rickerl

07-22-2003 19:08:24

Report to Moderator

I have a WC with spoke rear wheels, number on rear end is WC50834. Tires where full of fluid for years and one wheel is totally rusted out, the other may be OK. Are these wheels correct for the year of the tractor? Were solid wheels used? What is the correct size for front wheels
Any help would be appreciated. Thanks Steve

[Log in to Reply] [No Email]

Alvin NE WI

07-23-2003 17:22:16

Report to Moderator

Re: wc spoke wheels in reply to steve rickerl, 07-22-2003 19:08:24

My book tells me the disc rims started at serial #59636 in 1937.

[Log in to Reply] [No Email]

steve

07-23-2003 18:31:11

Report to Moderator

Re: Re: wc spoke wheels in reply to Alvin NE WI, 07-23-2003 17:22:16

Thanks for the information Alvin. At least I know the spokes are correct. Now I just have to find a replacement. Steve

[Log in to Reply] [No Email]

Jonesy

07-23-2003 13:54:33

Report to Moderator

Re: wc spoke wheels in reply to steve rickerl, 07-22-2003 19:08:24

Ive got 2 WC's that im selling. One has F&H cutt-offs and the other has solid wheels w/rims. One of the tractors has 2 trannys and the other has a mechanical lift.

[Log in to Reply] [No Email]

Larry

09-23-2003 18:31:21

Report to Moderator

Re: Re: wc spoke wheels in reply to Jonesy, 07-23-2003 13:54:33

Can someone explain to me what F+H cut offs are? I have 2 WC's I am going to restore. They both have wheels with flat spokes, 28 inch, and F+H stamped in the hubs. Are they OE modified, aftermarket or what???

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy