was just about to pull the trigger on purchasing some replacement fenders when I found an add in local paper for a 53 wd 450.00 bucks.Looking it over it had near perfect fenders and very good sheetr medal. It ran out good but needs an exhaust manifold gasket. What really surprised me was it had all the correct lights including one that was mounted on the rear of the tool box hanging on the fender. Never seen one like that. So another tractor in the shed and had to convince the wife what a good deal we got on new fenders.
Re: Re: wd in reply to Brian G. NY, 06-13-2003 06:31:20
Although I frown on nonsence on tractor boards. Did either of you read every word????? Wake up, he said very plainly he had a wife--OK best get off this gig before The little lady catches wind of my smart mouth.
Re: Re: Re: Re: Re: wd in reply to Jeff in Indy, 06-16-2003 14:57:54
jeff i have seen a few WD s advertised for around a thousand recently. keep checking the local ad papers. also a good guy out by monrovia on I-70 west of indy name of dave watson sells ac stuff reall reasonable and carries some aftermarket parts too! 1.317.539.6764oi got my D 17 from him and several parts and intend to get somemore soon. good luck
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
16 x 38 double bevel rims, sealed and painted 250 each
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
