Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

WD45 Rear Wheels

Welcome Guest, Log in or Register

03-08-2003 03:14:28

Report to Moderator

Did all WD45's come with spin out rear wheels or were plain pressed steel rims/wheels available from the factory? What rear tire sizes were available from the factory? I am trying to help a pulling friend get his 45 down to the next class. Local rules dictate that standard or factory optional rims/wheels be used.

Tahnk you,

[Log in to Reply]   [No Email]

03-17-2003 18:16:09

Report to Moderator
 Re: WD45 Rear Wheels in reply to A.P., 03-08-2003 03:14:28  
To my knowledge all 45's had spinouts. My dad and I pull 45's too he pulls 4500 to 6000 and I pull 3500 to 6000. He has 14.9-28's loaded. To get the weight down I bought a set of 14.9-26 wheels and tires off an Allis combine. There the same height as my 13.6-28's but wider. What options does the tractor have? power steering? Taking off the 3-point or snap coupler arms will shed a good bit. With spinouts i can just barley get to 3500 with me (150lbs) on it. I also have factory power steering.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy