Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Re: 80 pto hp

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Jeff (Mi.)

02-27-2003 02:57:49




Report to Moderator


I have found discbinds that need 60hp., Agco and Newholland both make them. I'm looking for one to pull behind my D-19, my D-19 has four outlets and about 65hp. Jeff




[Log in to Reply]   [No Email]
karl f

02-28-2003 09:32:45




Report to Moderator
 Re: Re: 80 pto hp in reply to Jeff (Mi.), 02-27-2003 02:57:49  
we currently use a 656 farmall gas, but at 65 hp it's workin pretty hard and eating a lot of gas. 4 gals per hour is kind of hard on the pocketbook. of course did not get to the first crop until august when the machine was purchased and there was never a dry day all summer, so it may fare better when the hay is young and the ground isn't soaked. the other tractors are ford 5000 diesel (65-70hp)which is too low a profile or a 1256 IH (120+hp)....there's a huge gap, and the big tractor sometimes is too physically big for the job we are doing, it will tear up the driveway pretty good even when it's dry, and using it in a hayfield can be even worse on the terrain--wet ground you may not go more than 20 feet.
so we're looking for something in between.
-karl

[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy