Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Allis WD 45 torque specs

Welcome Guest, Log in or Register
Author 
Adam From Wi

02-12-2003 13:44:44




Report to Moderator

I have just aquired an Allis Chalmers WD 45 with an Allis loader, and have to do some work on the head and was wondering how many foot pounds I should torque the head, mantifold, and rocker arm assembly bolts too. Any help would be greatly appreciated.




[Log in to Reply]   [No Email]
DanD.

02-12-2003 17:21:56




Report to Moderator
 Re: Allis WD 45 torque specs in reply to Adam From Wi , 02-12-2003 13:44:44  
For the head, tighten the 1/2" studs to 70 foot pounds, while the 3/8" studs are to be tightened to 25 foot pounds. This is from the I&T shop manual. Couldn't find any recommendations in that book concerning the rocker arm bolts or manifold nuts. I guess in that case you tighten just enough to make it secure without twisting anything off! (Couldn't help being a smart alec just a little.)



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy