| |
Re: hyd cyl
[Show Entire Topic]
Author |
|
Big Orange
02-08-2003 10:00:32
|
I remember when we had the mower on a 45 we had trouble with the cap screws that held the mounting bracket to the tractor frame,made the holes bigger and deeper and used grade 8 bolts.
|
|
|
bob
02-08-2003 13:10:41
|
Re: Re: hyd cyl in reply to Big Orange, 02-08-2003 10:00:32
|
|
correct me if I am wrong but didn,t allis have high pressure system and you can,t use reg pressure cyl. without blowing them bob
|
|
|
Big Orange
02-08-2003 14:20:33
|
Re: Re: Re: hyd cyl in reply to bob, 02-08-2003 13:10:41
|
|
Bob, they did have a high pressure system,and if you used a large diameter cylinder they were slow,high pressure low flow,I think thats why most of the early AC cylinders were 2-2.5",but I could be wrong.
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Restoration Story: 1951 Farmall H - by The Red (John Fritz). I have been a collector of Farmall tractors since 1990 when I first obtained part of the family farm in Eastern Indiana. My current collection includes a 1938 F20, 1945 H, 1946 H, and the recently purchased 1951 H. This article will focus on what I encountered and what I did to bring the 1951 NEAR DEATH Farmall H back to life.
... [Read Article]
Latest Ad:
2 old Dodge Pickup Trucks not running mostly complete early 50s flathead 6cyl stepside box side entry hoods Price 1200 both.
[More Ads]
Copyright © 1997-2022 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|