Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Re: WD 45

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Chester Golat

01-14-2003 13:10:47




Report to Moderator


I have a A-C WD & a A-C WD45 the WD has a row crop front end or NF. & is about 38hp & has a strate up & down shift lever & has a thiner head on it. As for my A-C 1957 WD45 i have a wide Front on it. & for me i like that better. & i do have P/S on it to. The WD45 is about 45hp & has the curved shift on it. ALL WD45 should have this shift. & the head is thicker or taller. That is just some ways to check out WD's from WD45s I hope i have helped you out some.
CHESTER GOLAT from Ladysmith Wis. O ya i have a ALLIS-CHALMERS U all so

[Log in to Reply]   [No Email]
Jim in Michigan

01-14-2003 18:21:01




Report to Moderator
 Re: Re: WD 45 in reply to Chester Golat, 01-14-2003 13:10:47  
Chester,,,Hows the weather your way? I am about 60 Miles North of Rhinelander Wis in Michigan..I have a few AC's here myself,,a WD, a WD45 and a 1939 B,,,thinkin of selling the WD and the WD45 though..both are wide fronts,,WD45 runs,,other needs a rebuild and tires...Have loaders for both ,,I just have too many tractors right now and too little time or money,,,JIm



[Log in to Reply]  [No Email]
Chester Golat

01-14-2003 20:29:41




Report to Moderator
 Re: Re: Re: WD 45 in reply to Jim in Michigan, 01-14-2003 18:21:01  

well Jim iam not realy looking to buy But how much would you want for the WD & THE 45.
O & iam realy SORRY about one of the posting i did on hear about the HP on the WD & the WD45. The ALLIS-CHALMERS WD was Manufactured 1948 to 1953 & cost about $ 1,830 & Drawbar HP 19.3 & PTO HP 25.08 with a A-C gas 4 cyl Engine & Displacement 201ci & weight about 4465lbs.
The A-C WD45 manufactured 1953 to 1957. Cost: $ 2,575 & Drawbar HP 30.1 & PTO HP 38.61 With a A-C 4 Cyl gas Engine. Displacement 226ci & weight about 4465lbs. Chet.

[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy