Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Allis chalmers w-d wiring

Welcome Guest, Log in or Register
Author 
larry c

11-03-2002 20:34:43




Report to Moderator

seems like ground squirrels like chewing wires . I am not getting any spark from distributor need to know how it is supposed to be wired . any info would help . thanks larry c




[Log in to Reply]   [No Email]
kevin

11-07-2002 08:14:54




Report to Moderator
 Re: allis chalmers w-d wiring in reply to larry c, 11-03-2002 20:34:43  
Larry,

I just tuned up my neighbor's WD w/distributor. If you need any help, let me know.

Kevin



[Log in to Reply]  [No Email]
Steve in N.J.

11-04-2002 04:34:36




Report to Moderator
 Re: allis chalmers w-d wiring in reply to larry c, 11-03-2002 20:34:43  
Larry,
I'll be releasing a new WD/WD45 harness shortly. If interested, drop me a line... Steve B.



[Log in to Reply]  [No Email]
Duey (IA)

11-03-2002 21:42:50




Report to Moderator
 Re: allis chalmers w-d wiring in reply to larry c, 11-03-2002 20:34:43  
Larry,
Check out the diagrams on my web page. The basic B&C is the same as the WD.



[Log in to Reply]  [No Email]
larry c

11-13-2002 20:22:21




Report to Moderator
 Re: Re: allis chalmers w-d wiring in reply to Duey (IA), 11-03-2002 21:42:50  
thanks you for all your help the diagram is what I needed .larry c



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s ... [Read Article]

Latest Ad: John deere 148 Loader, with all brackets. 6 foot Bucket, loader in pretty solid shape, no welds, scraping edge on bucket straight, couple of new hoses, couple may need replaced down the road. Mounted valve controls. text me for pics. Jim [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy