Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Help

Welcome Guest, Log in or Register
Author 
acd17toy

10-13-2002 17:33:09




Report to Moderator

I am putting new rod bearings in my WC. had the crank checked and polished got the bearings from the same guy, all are 20 over. three of the bearings checked out at 002. the last one is giving me fits have put in 3 shims and do not seem to be getting any closer to 002". I am using shim stock and do not know how thick it is. Question has anyone gotten shims for the rod caps from a Agco dealer lately?

[Log in to Reply]   [No Email]
Denny

10-15-2002 13:31:29




Report to Moderator
 Re: help in reply to acd17toy, 10-13-2002 17:33:09  
I guess shims are shims. I've always had enough that I didn't need any more. I think you can use the old ones as a template and make new ones out of 0.001 brass shim stock using a sharp scissors to cut them. If you make them, inspect them carefully for flash or fold overs that can cause a problem.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy