Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Late model CA (1957) or Late model B

Welcome Guest, Log in or Register
Author 
guyfawkes

07-20-2002 17:32:29




Report to Moderator

Anyone have a pic and info on the instrument box? What type light switch was used with these ? They had a regulator not a cutout on the generator. Was it a keyed on/off to go with the starter pull rod? Have tryed Unoficial Allis, GenSales,etc. No luck. Thanks, Pat




[Log in to Reply]   [No Email]
Ira

07-21-2002 05:08:43




Report to Moderator
 Re: Late CA (1957) or Late B in reply to guyfawkes, 07-20-2002 17:32:29  
My 53 has a on/off key switch with starter pull rod.Light switch just pulls out in one position but mine is a 12v sytem with an alt.



[Log in to Reply]  [No Email]
tom

07-22-2002 13:43:39




Report to Moderator
 Re: Re: Late CA (1957) or Late B in reply to Ira, 07-21-2002 05:08:43  
my 53 ca has a key switch with starter pull rod also. but the light switch is three position. high and low charge and lights.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga ... [Read Article]

Latest Ad: Looking for 730 fuel,tank hood, carb, intake and other associated pipes, and entire dash pedestal with shaft and steering wheel(rebuildable carb) [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy