Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

WD specs

Welcome Guest, Log in or Register
Author 
Sheila

07-17-2002 12:26:42




Report to Moderator

Need head and rod bearing torque specs also head bolt tighting diagram.




[Log in to Reply]   [No Email]
jms/mn

07-18-2002 09:55:30




Report to Moderator
 Re: WD specs in reply to Sheila, 07-17-2002 12:26:42  
All the info you need is in the OPERATOR'S manual, along with lube specs, hydraulic adjustments, etc, and basic tractor care and adjustment.



[Log in to Reply]  [No Email]
Bill Hires

07-18-2002 04:26:53




Report to Moderator
 Re: WD specs in reply to Sheila, 07-17-2002 12:26:42  
Cylinder head- 1/2" = 70, 3/8" = 25 Connecting rods = 70, Mains = 80 Start in the center and work to the outside in a circular pattern. I take three settins of the torque wrench to get to the maximum reading. Example, on the mains 25, then 50, then 80.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy