Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

WD Pulling Info Needed

Welcome Guest, Log in or Register
Lawrence S.

06-02-2002 18:37:29

Report to Moderator

Bought a WD recently with stuck piston.Was going to restore but I got two teenage boys with pulling fever.Dont have too many Allis pullers around here and thought some of you guys could maybe point me in the right direction to puff her up a little.Any and all help,advice,etc,would be appreciated.Caught a little discussion the other day about 175 pistons.Local rules limit speed and rpm but internals could be massaged a little.Thanks in advance.

[Log in to Reply]   [No Email]
Allis Puller

06-03-2002 04:00:12

Report to Moderator
 Re: WD Pulling Info Needed in reply to Lawrence S., 06-02-2002 18:37:29  
Just putting mine back together, but I bought a "WD45" crank and 175 pistons. Supposed to get her up around 55 h.p. Also when I was running a stock motor I went with a 13" rim and 14.9 tires, made a huge difference. Ruffly 15 to 20 feet. Lots of money though, I think the pistons and rings were 580.00, the crank right around 300.00, and about 900.00 in rims and tires.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy