Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

More Power for B

Welcome Guest, Log in or Register
Author 
D13

04-13-2002 03:16:57




Report to Moderator

Found a crank start B for $100. It's about in the shape you would expect (motor locked and tin bent), but it's all there. I'd like to make a puller out of it, and I'm wondering if anyone sells high compression or overbore pistons for these (higher than the CA)? Any perfromance grind camshafts?

I figure'd I'd get the head milled slightly and fabricate my own intake and exhaust (it has the dualfuel in really good shape - belongs on a much nicer tractor). Due to the inherent balance issues I'm not going to overrev it like I would a Chevy.

Any other motor suggestions (no, no nitrous or nitromethane).

[Log in to Reply]   [No Email]
Steve in N.J.

04-15-2002 04:09:07




Report to Moderator
 Re: More Power for B in reply to D13, 04-13-2002 03:16:57  
D13,

That's a question for Dick L. on this site. He's the engine "guru" and he also pulls with his tractors. He's a wealth of info on A/C's, especially the engine dept. I'm sure he'll be able to answer yer' question when he see's it here...



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy