TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Allis Chalmer G Brake Help

Welcome Guest, Log in or Register

Author

t-texas

11-15-2001 07:31:04

Report to Moderator

Where do I go after unbolting the axle from the frame? Procedural help would be appreciated.

[Log in to Reply] [No Email]

Eric Egland

11-18-2001 17:27:26

Report to Moderator

Re: Allis Chalmer G Brake Help in reply to t-texas, 11-15-2001 07:31:04

I re-ligned my brake shoes. The material is available from McMaster-Carr,they also carry rivets. I'ts a chore to drill and countersink the holes, but very satisfying to do it for much less than what I see sets selling for . I have a spare set of new linings that I made, but didn't use because I decided to go with a different material.

[Log in to Reply] [No Email]

Dusty

11-16-2001 21:59:24

Report to Moderator

Re: Allis Chalmer G Brake Help in reply to t-texas, 11-15-2001 07:31:04

Go to an AGCO Allis dealer and get a service manual. You can also get a parts manual that will have the parts numbers. These manuals are rather inexpensive.

Good Luck,
Dusty

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy