Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

AC B bench seat size

Welcome Guest, Log in or Register
Author 
Joe S

06-10-2001 09:32:20




Report to Moderator

I want to put a bench seat on my 39 B, that has a after market bucket seat. Can anyone tell me the rectangular dimensions of the frame and angle iron size? Also any seat cushion sizes, like height, etc. Thanks- Joe




[Log in to Reply]   [No Email]
Tom in Tacoma

06-10-2001 15:10:27




Report to Moderator
 Re: AC B bench seat size in reply to Joe S, 06-10-2001 09:32:20  
Joe,
I had some metal pieces cut and bent (20 gauge) so that I could re-make my seat frame. I havent gotten to the point of assembling them yet so I don't know how it is going to go. I purchased a pretty decent seat with the original cover from Paul Barnsley. The frame parts should not be made from angle if you want it like the original.
The seat base is 15"x28" and is about 51/2 to 6" high. The seat is sort of curved on top and originaly was made of green canvas duck.
I found that after I paid a metal fabricator to cut and bend my metal which I still have to weld and paint, I could by one built by a guy on the AC-B restoration web site. I think you can get to it with a link from this page. Tom

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy