Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Help in ident. A/C year model please

Welcome Guest, Log in or Register
Author 
Ben and Son

06-05-2001 10:32:50




Report to Moderator

My son & I picket this old A/C up from a friend that had passed on...we would like to add it to our "good Ole' Iron
The Numbers I found are:
Back of Block:(stamped)W33583K

On the trans: (Left,on top near bellhousing:K4165
Thanks to all for you time.
Ben




[Log in to Reply]   [No Email]
Dave Grubb

06-05-2001 12:58:43




Report to Moderator
 Re: Help in ident. A/C year model please in reply to Ben and Son, 06-05-2001 10:32:50  
I have looked through my Norm Swinford book but I did not find those numbers with those prefixes. If you can supply more info and description someone here can identify it for you.



[Log in to Reply]  [No Email]
Ben Son

06-05-2001 13:47:06




Report to Moderator
 Re: Re: Help in ident. A/C year model please in reply to Dave Grubb, 06-05-2001 12:58:43  
Hi Dave:
1st let me thank you for the "SUPER response time" I'm am impressed. In searching through so much info. I had remembered another Ser: location on the center of the axle so.....low & behold !
She is a WC..The complete # is WC32895. The block is cracked..way to far gone to work with so I bought another from a old rancher...(he seemed to know what it was)
Extra Pts.right..The motor ran fine..before I decided to see what was under the..Bondo..yep..that's what was on her bout 1/2 thick..but Ya gotta give credit ..it didn't leak till I decided to "fix it right" I'm hoping to mic the other block & this one after I tear it down to see what pts I can use..Hoping the whole recip. assembly.
If ya got some interesting history or info. we sure would welcome it all..
THANKS AGAIN
Ben

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy