Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

AC HD6 series E Need Info

Welcome Guest, Log in or Register
Author 
Mike

07-31-2000 17:36:22




Report to Moderator

I am contemplating the purchase of an AC HD6 series E dozer. It is in better shape than any old dozer that I have ever seen. Original-looking hour meter shows 5000 hours. Has hyd. lift manual angle
blade and hydraulics to the rear,but no winch or
other attachments. Starts and runs great.
Would like to know when it was made, any potential problems to look for, and any other info. that anyone could provide.
Thanks,
Mike

[Log in to Reply]   [No Email]
Andy

08-01-2000 06:06:35




Report to Moderator
 Re: AC HD6 series E Need Info in reply to Mike, 07-31-2000 17:36:22  
Mike- check the flat area on the back of the tractor above the ripper frame, to the right of the center/line. Most had a serial # stamped in the steel. May be tough to see, unfortunately they started over with every model.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy