Re: wd hitch in reply to Andrew Harvey, 04-23-2000 21:36:41
Andrew, Looks like you have most of the 3pt hitch adaption. You have the toplink centered on the lift arms. You have the forward supports for the lower 3pt liftarms. All you need are the lower liftarms, the link to the upper lift arms for each and your toplink. If anybody can give you any greater detail, I'd like to hear it. If there is a drawing available of the front piece and the centerpiece on the drawbar, I would like to build a similar hitch. Dave
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
good hydraulic unit for JD 50/520/530
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.