Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Allis Chalmers Discussion Forum
:

plow question

Welcome Guest, Log in or Register
Author 
jk

04-20-2008 12:59:07




Report to Moderator

i went to a local auction yesterday and there was a decent 2 bottom plow i wouldn't like to have for my C. my question is, how can i tell what size the moldboard is? it looked small like a 12 or 14, but i didn't want to take a chance of buying a plow my C can't pull. any tips for "plow shopping"? thanks




[Log in to Reply]   [No Email]
ed in cny

04-21-2008 08:59:46




Report to Moderator
 Re: plow question in reply to jk, 04-20-2008 12:59:07  
Can I ask a few questions first? #1 is it a tow behind? #2 When was the tractor made? #3 What kind of ground are you turning over?

Reason I ask would be that the C could pull two bottom if it's set up right and in good soil. If it gets to rocky it would be a really hard to pull and really not worth the trouble. I have a book put out by IH that is very informitive to all plows not just the IH. It shows how to set up the plow, measure, and even set up stuff like the coulter and such. I could send a PDF out if you wanted one on how to measure. Let me know.

[Log in to Reply]  [No Email]
Ken L

04-20-2008 16:37:46




Report to Moderator
 Re: plow question in reply to jk, 04-20-2008 12:59:07  
Measure from center to center of the plow beams.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Pop's Tractor of Gold - by Gary Teate. My father was a simple man but could repair just about anythin mechanical that was ever made. From the time I was a young boy growing up in Jacksonville, Florida, I would spend a considerable amount of time helping my father repair or rebuild equipment and engines, etc. on our 2 1/2 acre "spread". Pop always dreamed of having more acreage out in the country where he could retire and tinker as much as he wanted and often reminisced about his boyhood days on his grandfathers farm in Montecello, ... [Read Article]

Latest Ad: Looking for a skid for a W_power unit----also a green & yellow John Deere antifreeze gallon can. [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy