Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Allis Chalmers Discussion Forum
:

D14 3pt limits

Welcome Guest, Log in or Register
Author 
J Henkle

04-07-2008 18:31:20




Report to Moderator

Curious if a D14 with a good 3pt hitch would handle a 7' Bush Hog mower (1030 lbs)? I would be mowing rolling pasture and old food plots in the spring (corn beans sorghum).

I realize I would be close to max on hp, but the weight concerns me more.

I also have a D17 and would like to purchase the 7' mower if it can be used on either tractor.

Thanks a bunch! jh




[Log in to Reply]   [No Email]
Texas Denny

04-07-2008 19:13:57




Report to Moderator
 Re: D14 3pt limits in reply to J Henkle, 04-07-2008 18:31:20  
One more point. Even with 6', i do use 3rd low range a bit. With 7', you'll be able to pull it but may be in low gear. I think the hydraulics will handle it but I haven't the experience.



[Log in to Reply]  [No Email]
Texas Denny

04-07-2008 19:11:43




Report to Moderator
 Re: D14 3pt limits in reply to J Henkle, 04-07-2008 18:31:20  
I use a 6' with my D-14 and it works just fine. I think 7' would be a bit much for my tractor. Moving from 5' to 6' is a much bigger jump than one would expect. I would expect the jump to 7' would surprise as well.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t ... [Read Article]

Latest Ad: Looking for a operator platform to fit a 1070 case tractor. Part number is A 62150 old number is A60672. [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy