Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Allis Chalmers Discussion Forum


[Show Entire Topic]  

Welcome Guest, Log in or Register

03-15-2008 05:51:18

Report to Moderator

1.) Do NOT use a cutout in addition to the regulator. There IS a cutout IN the regulator. Whoever told you there wasn't one is "full of beans"!

2.) Since you have identified the L, Batt, and F terminals the remaining one HAS to be the "GEN" or "ARM" terminal (different words for the same thing).

[Log in to Reply]   [No Email]

03-16-2008 11:48:40

Report to Moderator
 Re: WAYNE... PLEASE read! in reply to Bob, 03-15-2008 05:51:18  
I replaced the cut out with the new voltage regulator yesterday. I used the terminal on the back of the regulator as the generator output connection. The "L" terminal was left alone and I induced a brief current across the "batt" and the "G" terminals on the regulator prior to starting the tractor. It is working fine. I will have to wait for a few days to insure that the regulator naintains a charge on the battery.

The battery was fully charged when I installed the regulator.

Thanks for preventing me from doing something wrong on the hook up.


[Log in to Reply]  [No Email]

03-16-2008 17:05:44

Report to Moderator
 GREAT job! in reply to Carbonfibers, 03-16-2008 11:48:40  
GREAT job!

It's always nice to hear something works like it's SUPPOSED TO!

Especially, nowadays, when so many of these products come from "The Land of Almost Right"!

[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy