I have a 1938 allis Chalmer model B and when i got it, it was missing the throttle rod from the throttle handle to the magneto area and the rod from the arm which comes from the magneto area to the carborator. I have looked around for those rods or rod sizes at dealers and online, and i havent been able to find one. Is their any chance someone could measure those rods so i can make my own? and if you can please measure the rods when they stop at the bends. thanks alot for helping me!
Re: Throttle rods in reply to Brian L-M, 02-03-2008 18:43:01
That should be a piece of cake as there are several vendors parting out B and C tractors. I suggest starting with Doc's Equipment in Lacon, IL 309-246-2900. If he doesn't have one check back and I can get you some more numbers.
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.