Swathboard for B/C Sickle Mower

Posted by Rod (NH) on May 02, 2004 at 11:04:15 from (12.148.160.138):

I finished my replacement swathboard today. It is made of 13/16" thick red oak. The grass stick is a 1-1/8" diameter hardwood dowel that is 31" OAL. Here's what it looks like with the hardware installed:

For those who do not have an original to go by and would like to make one for their B/C mower, here's a measured drawing in pdf format. I like to keep the grass stick running high so I do not bother to drill the upper two stick adjustment holes shown. The grass stick angles inward about 10 deg from the inside surface of the swathboard. This angle doesn't show well in the photo. It is fixed by the stick mounting hardware.

Rod

Follow Ups:

• Re: Swathboard for B/C Sickle Mower Bob H nw Oh 14:59:08 05/03/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Swathboard for B/C Sickle Mower Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]