Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Oliver 1850 Tractor Parts

[ Show Pictures ]

[Categories]   [All Oliver Models]   [Print]  


Brakes
Brake Actuating Disc - For tractor models White 4-150, White 4-180, (1850, 1950 SN# 150421 and up), (1750 SN# 180537 and up), (1800, 1900 SN# 90525 and up). (Part No: 105725AS)
$221.29

Brake Disc, Bonded - 8.00 inch outside diameter, 5.00 inch inside diameter, 21 spline hub, fits 2.750 inch shaft diameter. For tractor models 1750, 1755, 1800, 1850, 1855, 1870, 1950, 1950T, 1955, White 2-105, White 2-110, White 2-150, White 2-85, White 2-88, 2050, 2255, 2270, White 4-175, White 4-180. (Part No: 303135241)
$28.10

Clutch
Clutch Bearing Carrier - This clutch bearing carrier has an outside diameter on the bearing seat of 2.252 inches. For tractor models 100, 120, 125 Workhorse, 140, 145 Workhorse, (1750 SN# 180537 and up), 1800, 1850, 1950, White 2-135, White 2-155. Replaces 104809AS, 167999AS. Used with clutch bearing part number 30-3056287. (Part No: 72160064)
$72.62

Clutch Disc, Organic - 13" x 1-3/4"-27. For tractor models (1750 SN# up to 190957), (1800, 1850 up to SN# 198393 gas), (1850 up to SN# 194007 diesel with flat flywheel). (Part No: 160974AS)
$127.65

Clutch Pilot Bearing - For tractor models 1750, 1755, 1800, 1850, 1855, 1900T, 1950GM, 1955, 2050, 2255. (Part No: 30-3065154)
$14.97

Clutch Release Bearing - This release bearing has an inside diameter of 2.25 inches. For tractor models 1750, 1755, 1850, 1855, 1950-T, 1955, 2050. (Part No: 30-3056287)
$33.41

Clutch Shaft - This clutch shaft measures 9.250 inches long and has 27 spline. For tractor models (1750 SN# 190958 and up), (1850 SN# 198394 and up), (1950 SN# 194080 and up). (Part No: 163928A)
$237.86

Clutch Shaft - 11.64" long, 27 spline. For tractor models (1850 SN# 150421 and up), (1750 SN# 180537), (1800, 1900 SN# 90525 and up without Hydra power or creeper drive). (Part No: 104844A)
$235.50

Clutch Shaft - 8.89" long, 27 spline. For tractor models (1850 gas SN# 150421-198393 & diesel SN# 150421-194007), (1750 SN# 180537-190957), (1800, 1900 SN# 90525 and up without hydra power or creeper drive). (Part No: 104837A)
$237.86

Clutch Shaft Coupler - 3.37" long, 27 spline. For tractor models (1850 SN# 150421 and up), (1750 SN# 180537 and up), (1800, 1900 SN# 90525 and up without hydra power or creeper drive). (Part No: 104834A)
$66.21

Release Bearing Fork - Throwout Bearing Fork for Models: (1550, 1555 SN# 160000 and up), 160, (1650, 1655 SN# 147569 and up), 170 Workhorse, (1750 SN# 180537 and up), 1755, (1800, 1900 SN# 90525 and up), 185, (1850, 1950 SN# 150421 and up), (1855, 1955 SN# 220000 and up), (195 Workhorse, (2050, 2150 SN# 204001 and up), (White 2-105, White 2-110, (White 2-135 SN# 272595 to 292563), (White 2-150, White 2-155, White 2-180, (2255 SN# 235650 and up), 2270, (White 2-62 SN# 160000 and up), White 2-70, (White 2-78, White 4-78 SN# 147569 and up), White 2-85, White 2-88, White 4-150, White 4-175, White 4-180, White 4-225, 60 American, (770, 880 SN# 60501 and up), 80 American. Replaces 101510A. (Part No: 72160045)
$118.86

Cooling System
Engine Block Heater (3/4 inch NPT) - Fits Models: 550, 770, 880, 1450, 1465, 1470, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950T, 1955, 2050, 2150, White 2-44, White 2-62, White 2-78, White 4-78. 1000 Watts (Part No: 161820A)
$55.19

Fan Belt - For model 1850 diesel up to serial number 168342. 1/2 inch x 48-5/8 inches long. (Part No: 378113R2)
$7.49

Fan, 4 Blade - 20" diameter, 1" pilot hole. For tractor models (1750 gas SN# 180537 and up), (1755, 1855, 1955 gas SN# 220000 and up), (1850, 1950 gas SN# 150421 and up), (1900 SN# 90525 and up), (1950T SN# 194080 and up). (Part No: 104763A)
$72.26

Radiator Hose - 2" I.D.. For model 1850 Row crop Diesel. (Part No: 158600A)
$23.19

Radiator Hose, Bypass - 1.75" I.D.. For tractor models 1650, 1655, (1750 SN# 180537 and up), (1755, 1855, 1955 SN# 220000 and up), 1800, (1850 SN# 150421 and up), 1900, 1950, (1950T SN# 195080 and up), White 2-78, White 4-78, White 2-70. (Part No: 168494A)
$34.23

Radiator Hose, Lower - 2" I.D.. For model 1850 Diesel. (Part No: 158624A)
$15.28

Radiator Hose, Upper - 2.00" I.D.. For tractor models (1750 gas or diesel), (1755 gas), (1850 gas RC), (1855 gas or diesel RC). (Part No: 158615A)
$10.16

Radiator Hose, Upper - 2.00" I.D.. For tractor models (1750, 1755 gas or diesel), (1850, 1855 gas/dsl tube to radiator). (Part No: 158620A)
$11.31

Radiator Hose, Upper - 2.00" I.D.. For model 1850 diesel. (Part No: 158715A)
$18.34

Water Pump - For tractor models (1650 diesel SN# 187586 and up), (1655 diesel), (1750 gas & diesel), (1800 SN# 124397 and up), (1850 gas), 1855, 1950T, 1955. Casting number 221560. Used with short single pulley (NOT included). Replaces 157069AS, 159925AS, 162095AS, (Part No: 157069AS)
$103.12

Water Pump - For tractor models (1800 gas or diesel SN# 124396 to 134683), (1850 gas or LP SN# 150421 and up), (1855 gas SN# 220000 and up & diesel SN# 220000 to 244324), (1750 SN# 180537 and up), (1955 SN# 220000 and up). (Part No: 162095AS)
$293.61

Water Pump - For tractor models 1850 DSL. Replaces casting number 159493AS, 377114. (Part No: 303061310)
$133.00

Water Pump Pulley - For tractor models 1850, (1550, 1555, White 2-62 ALL GAS SN# 169846>& DSL SN# 168921>), (1650, 1655, White 2-78, White 4-78 ALL SN# 187586>). This is a short double pulley. (Part No: 164041A)
$65.62

Water Pump Pulley - For tractor models 1850 GAS OR LP SN# 150421>, 1855 GAS SN# 220000> & DSL SN# 220000-244324, 1750 SN# 180537>, 1955 SN# 220000>. This is a long double pulley. (Part No: 162073A)
$114.49

Decals and Emblems
Decal Set - For 1850 Gas. Complete decal set. Made of Vinyl. (Part No: R2014)
$85.33

Decal Set - For 1850 Diesel. Complete decal set. (Part No: R2412)
$93.27

Drive Train
Coupler Sprocket - 14 teeth, 27 spline. For tractor models (1850 SN# 150421 and up without hydra power, ober under or creeper drive), (1750 SN# 180537 and up), (1755, 1855 SN# 220000 and up), (1800, 1900 SN# 90525 and up). (Part No: 104842A)
$74.85

Coupler Sprocket, Front - 2.250" seal area diameter, 14 teeth, 27 spline. For tractor models (1655, 1750, 1755, 1850, 1855, 1950T, 1955 with hydra shift trans). (Part No: 303143856)
$79.72

Coupler Sprocket, Front - 2.50" seal area diameter, 14 teeth, 30 spline. For tractor models (1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955 with Hydra power or creeper drive). (Part No: 107415A)
$69.45

Coupler Sprocket, Rear - 27 spline. For tractor models (1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955 all with hydrapower, O/U Hydra shift, creeper drive). (Part No: 107416A)
$67.00

Gear Shift Boot - For tractor models 550, 660, 770, 880, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255, (White 2-70, 2-85, 2-105, 4-150, 4-180), 60 American, 80 American, Super 55, 60, 66, Super 66, 70, 77, Super 77, 88, Super 88. (Part No: BA916A)
$7.47

Shift Knob - For tractor models Super 44, Super 55, Super 66, Super 77, Super 88, Super 99, 60, 70, 66, 77, 88, 660, 770, 880, 950, 990, 995, 1550, 1650, 1750, 1800, 1850, 1950, 1950T, 2050, 2150, 1555, 1655, 1755, 1855, 1900, 1955, 2255, 2-44, 2-70, 2-85, 2-88, 2-105, 100, 120, 125 WORKHORSE, 140, 145 WORK HORSE, 160, 170, 185, 195. Replaces 103098A, and 72160047. (Part No: B909A)
$3.51

Transmission Input Shaft - For tractor models G940, 1750, 1755, 1850, 1855, (1800, 1900 ALL SN# 124396 AND UP with PRESSURE LUBE), 1950 SN# 150421-189006. This shaft is 12.454"long. Spline Count 27 & 18 Spline. (Part No: 156892A)
$468.61

Transmission Output Shaft Seal - Thistransmission output shaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inch wide. It Fits: 1750, 1755, 1850, 1855, 2255. Replaces: 165175A, 166600A, 30-3131173, 30-3331849 (Part No: AT21608)
$11.61

Electrical System
Alternator - 12 volt, 55 amp. For tractor models (550, 552 1963 to 1967 with 144 gas), (770 1966 to 1967 with 232 gas or diesel and 1963 to 1967 with 144 gas or 216 diesel), (880 1963 to 1967 with 144 gas or 216 diesel), (1350, 1550 1966 to 1969), (1555 1969 to 1974 with 232 gas or diesel), (1650 1964 to 1971 with 265 or 283 gas), (1655 1969 to 1974 with 265 gas or diesel), (1750 1967 to 1968 with 288 gas or 310 diesel), (1755 1969 to 1974 with 283 gas or 320 diesel), (1850 1964 to 1968 with 310 gas or 354 diesel), (1855 1969 to 1971 with 310 gas or diesel), (1950 1964 to 1968 with DD 4-53 and 1969 with 212 diesel), (1950T 1967 to 1969 with 310 diesel), (1955 1969 to 1971 with DD 4-53), (1955T 1969 to 1971 with 310 diesel). Replaces 1100725, 1100720, 1100805. (Part No: ADR0231)
$128.53

Combo Switch Lever - Used with switches AM1866T, 10A971, 1K7654A, AR20430, AA5397R, 168089A, 30-3365891. For tractor models 1555, 66, 77, 88, Super 66, Super 77, Super 88, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955, 2050, 2150, 2255, White 2-70, White 2-78, White 2-85, White 2-105, White 2-110, White 2-150, White 4-78. (Part No: A4653R)
$6.53

Condenser - For tractor models White 2-62, White 2-78, White 4-78, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855. (Part No: 159770A)
$9.22

Distributor, New - This New Distributor, with Tach Drive is complete with points, condenser, rotor and cap. It is used on (Cockshutt; 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855), (Oliver; 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 77, 770, 88, 880, Super 77, Super 88), (White; 2-62, 2-70, 2-78, 4-78). This distributor will be a direct replacement for distributors with tachometer drives. If you have a tachometer drive just below your distributor, you will have to remove the drive assembly and create a cover plate and gasket to cover the hole where the tachometer drive is removed. You will then use the tachometer drive on the distributor. This is a mechanical advance distributor. If you have a vacuum advance, you will no longer use vacuum advance. For tune up, order ATK1DCR points, rotor and condenser, and 21A443 Cap. Replaces 158859AS, 1K7324, 1111702, 1111750, 1KA7324, 101129AS, 60261-C, 60261C, 30-3417778, D2563-1AA, 156126-AS, 156126AS, 1112632, 1112603, 106106AS. (Part No: R8119)
$317.40

Electronic Ignition Conversion Kit -12V Negative Ground - Electronic Ignition Conversion Kit by Pertronix. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractor models 1650, 1750, 1850 built between 1964 and 1965 with 248, 283 or 310 CID engines and Holley distributor. (Part No: HO161A)
$167.01

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 103427A, 103427AS, 105118AS, Cap: 106366A, 169295AS (Part No: 376852R91)
$6.80

Key Switch - 5 terminal, with keys and jam nut. For tractor models Cockshutt 550, Cockshutt 560, Cockshutt 570, Super 55, 550, 660, 770, 880, 950, 1555, 1600, 1650, 1655, 1750, 1755, 1850, 1855, 2255, 1950, 1955, 2150, White 100, White 140, White 160, White 2-70, White 2-85, White 2-88, White 2-105, White 2-110, White 2-135, White 2-150, White 2-155. Replaces 100423ASA, 105232AS, 611064AS, 721146A. (Part No: T18021B)
$43.13

Light Switch - 4 position, uses A4653R lever.DOES NOT COME WITH LEVER. For tractor models 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955, 2050, 2150, 2255, White 2-70, White 2-78, White 2-85, White 2-105, White 2-110, White 2-150, White 4-78. (Part No: 30-3365891)
$56.58

Spark Plug Set - Set of 4 spark plugs. For tractor models White 2-78, White 4-78, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900. Replaces 157803A, Autolite AL65 and Champion N12YC. (Part No: 834236M1)
$2.73

Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models (1850 1964 to 1969 with 354 diesel), (1950T 1967 to 1969 with 310 diesel), (1955T 1969 to 1974 with 310 diesel). Replaces 1113656. (Part No: SDR0076)
$254.16

Starter - This is a NEW Starter, 12 Volt and comes with a 4 post solenoid (Some used a 3 post and is available separately as Part # A-101059AS). For tractor models (1600, 1800 Gas, 1961-64), (550, 770, 1650, 1850, 1964-65), (1550, 1650, 1750, 1850, 1950 Gas, 1967-69), (770 Gas 1967-68), (550 Gas 1967-69), (55, 66, 77, 88, 88 Gas (White) all 1957), (550, 770, 880 Gas (White) 1958-60), (550 Gas 1971-73). (Part No: 1107682)
$202.58

Starter Solenoid - Switch assembly services starters 1113088, 1113098, 113139, 113656. For tractor models 1600, 1650, 1655, 1700, 1750, 1755, 1800, 1850, 1855, 1900. Replaces Delco 1115510 & 1119885. Supersedes 101609AS. 159711AS (Part No: 1115510)
$15.84

Starter Solenoid - This is a 12 volt, 4 post solenoid. Fits Oliver: (1550, 1600, 1650, 1750, 1755, 1850, 1855, 1950T, 1955, 770, 880 ALL Diesel), 77 with starter 1119778, 88 Diesel with starter 1113075. Cockshutt 560 (Diesel (sn C07401 and up)), Cockshutt 570 (Diesel (sn DO10001 and up), White 2-105, White 2-110, White 2-85, White 2-88. Replaces MAO-1096 , 101069AS, 159711AS. (Part No: 1115510)
$15.84

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 105386A, 105386A, 1K7392A, 1K7392C, 72160068, 7A7392, K7392A, T18524, TG07803, TO18117, TO7803. (Part No: R7994)
$11.25

Tune Up Kit, Mallory Distributors - Includes points, condenser. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, White 2-70. (Part No: 6806R)
$27.83

Voltage Regulator - 12 volt, replaces Delco 1119511. For tractor models 1650, 1655, 1750, 1755, 1850, 1855, 1950T, 1955, 2050, 2150. On tractors with alternator. (Part No: 30-3001806)
$34.65

Voltage Regulator - Voltage regulator, 12-volt. For Oliver tractors using Delco alternators Following Delco Alternators: 1100553, 1100557, 1100558, 1100566, 1100567, 1100568, 1100569, 1100570, 1100572, 1100590, 1100591, 1100662, 1100742, 1100750, 1100751, 1100778, 1100780, 1100787, 1100790, 1100791, 1100796, 1100797, 1100804, 1100810, 1100816, 1100817, 1100818, 1100834, 1100836, 1100837, 1100838, 1100839, 1100842, 1100843, 1100845, 1100846, 1100847, 1100849, 1100851, 1100856, 1100860, 1100870, 1100871, 1100875, 1100879, 1100883, 1100885, 1100886, 1100888, 1100889, 1100891, 1100892, 1100893, 1100895, 1100896, 1100905, 1100907, 1100908, 1100910, 1100916, 1100917, 1100921, 1100931, 1100932, 1100933, 1100939, 1100943, 1100944, 1100951, 1102943, 1102944, 1102945, 1119507. Replaces 157651AS, 166626A, 30-3001806 (Part No: 1031060M91)
$11.88

Engine Bearings
Main Bearing Kit - Standard. 1 Kit used per engine. For tractor models 1750, 1850. Both with either 283 or 310 CID 6 cylinder gas engines. (Part No: MBK-W047)
$210.17

Main Bearing Kit - .020". 1 kit used per engine. For tractor models 1750, 1850. Both with either 283 or 310 CID 6 cylinder gas engines. (Part No: MBK-W047-020)
$181.28

Main Bearing Kit, .010 - .010". 1 kit used per engine. For model 1850 with 354 CID 6 cylinder Perkins diesel engine. (Part No: MBK-P354D-010)
$48.69

Main Bearing Kit, .020 - .020". 1 kit used per engine. For model 1850 with 354 CID 6 cylinder Perkins diesel engine. (Part No: MBK-P354D-020)
$43.74

Main Bearing Kit, Std - Standard. 1 kit used per engine. For model 1850 with 354 CID 6 cylinder Perkins diesel engine. (Part No: MBK-P354D)
$44.15

Rod Bearing Set, .010 - This .010 oversize Rod Bearing Set is complete for one six cylinder engine. This kit fits models: Super 88 gas and diesel, 1600 diesel, 1650 diesel, 1655 diesel, 1800A gas and diesel, 1750 gas and diesel, 1755 gas and diesel, 1800B gas and diesel, 1800C gas and diesel, 1850 gas, 1855 gas and diesel, 1955 diesel. (Part No: CRK-W036-010)
$101.29

Rod Bearing Set, .010 - 1 kit used per engine. For model 1850 with 354 CID 6 cylinder Perkins diesel engine. (Part No: CRK-P354D-010)
$23.46

Rod Bearing Set, .020 - This Standard size Rod Bearing Set is complete for one six cylinder engine. This kit fits models: Super 88 gas and diesel, 1600 diesel, 1650 diesel, 1655 diesel, 1800A gas and diesel, 1750 gas and diesel, 1755 gas and diesel, 1800B gas and diesel, 1800C gas and diesel, 1850 gas, 1855 gas and diesel, 1955 diesel. (Part No: CRK-W036-020)
$101.66

Rod Bearing Set, .020 - 1 kit used per engine. For model 1850 with 354 CID 6 cylinder Perkins diesel engine. (Part No: CRK-P354D-020)
$16.79

Rod Bearing Set, .030 - This standard size rod bearing set is complete for one six cylinder engine. This kit fits models: Super 88 gas and diesel, 1600 diesel, 1650 diesel, 1655 diesel, 1800A gas and diesel, 1750 gas and diesel, 1755 gas and diesel, 1800B gas and diesel, 1800C gas and diesel, 1850 gas, 1855 gas and diesel, 1955 diesel. (Part No: CRK-W036-030)
$96.46

Rod Bearing Set, 152 Diesel, .010 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036A)
$10.19

Rod Bearing Set, 152 Diesel, .020 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036B)
$10.19

Rod Bearing Set, 152 Diesel, .030 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036C)
$9.55

Rod Bearing Set, 152 Diesel, Std - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036)
$10.19

Rod Bearing Set, Standard - Standard. 1 kit used per engine. For model 1850 with 354 CID 6 cylinder Perkins diesel engine. (Part No: CRK-P354D)
$26.97

Rod Bearing Set, Std - This Standard size Rod Bearing Set is complete for one six cylinder engine. This kit fits models: Super 88 gas and diesel, 1600 diesel, 1650 diesel, 1655 diesel, 1800A gas and diesel, 1750 gas and diesel, 1755 gas and diesel, 1800B gas and diesel, 1800C gas and diesel, 1850 gas, 1855 gas and diesel, 1955 diesel. (Part No: CRK-W036)
$101.39

Engine Gaskets
Conversion Gasket Set - Converts head gasket set into overhaul gasket set. For tractor models (1650, 1655, White 2-70 diesel up to SN# 187585), (1750, 1755 gas or diesel), (1800 from SN# 124396 gas or diesel), (1850, 1855, 1950 with 310 Waukesha gas). (Part No: CS3809)
$102.09

Gasket Set - Overhaul gasket set. For Model: 1850 with 354 CID 6 cylinder diesel engine. Less crankshaft seals. (Part No: FS1851D)
$114.71

Gasket Set, Top - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: U5LT0038)
$38.26

Head Gasket Set - For 1850, 1855, 1950 with 310 Waukesha Gas Engine (Part No: HS3809W)
$274.33

Rear Crankshaft Seal - Thisrear crankshaft seal has a 4 inch Inside Diameter, a 5.004 inch Outside Diameter and is .5 inch wide. It Fits:1550, 1555, 1600, 1650, 1655, 1750, 1755, 1855, 1950T, 1955, 1800 (SN: 124396 and up), 1850. Replaces: 155726A, 162507A, 168149A, 30-3057534, 30-3072959, 30-3089746, 415953 (Part No: A51339)
$22.25

Seal, Front - For AD3.152 Perkins Diesel models: 1850, 1950, White 2-105, White 2-85. Replaces: VPC5102, VPC5103, 02100004, 1446853M1, 1447690M1, 2413F436, 2415361, 7701031630, 810742, 812280. (Part No: 2418F436)
$9.47

Valve Seals - Valve seals for AD3. 152 Perkins Diesel. With engine serial number less than 2820092. Replaces 1447019M1, 33817125, 33817402, 3637041M1, 733820M1, 736840M1, 740009M1. Price shown is for each, sold only in multiples of 6 items. (Part No: 33817117)
$.98

Engine Rebuild Kits
Engine Overhaul Kit - 310 CID 6 cylinder gas engine. For model 1850. Kit contains Sleeves, 3-7/8" pistons, rings, pins, retainers, pin bushings, valves, valve springs, valve guides, valve keys and gaskets. Bearings NOT included. (Part No: EOK1312-LCB)
$2140.70

In-Frame Overhaul Kit - 3 7/8 Bore. For tractor models 1850, 1855, 1950 with 310 Waukesha Gas Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3962-IFK)
$1570.08

Overhaul Kit - 3 7/8 Bore. For tractor models 1850, 1855, 1950 with 310 Waukesha Gas Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3962-OHK)
$1658.35

Engine Parts
Bolts, Conn Rod - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 32762144)
$3.82

Crankshaft Gear - This crankshaft gear fits the following tractor models: Super 55, Super 66, Super 77, Super 88, Super 99, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1800A, 1800B, 1800C, 1850 (gas and LP), 1855, 1950T, 1955, 550, 551, 552, 66, 660, 77, 770, 88, 880, 950, 2-70, 2-44, 2-62, 2-63, 2-78, and 4-78. It has 30 teeth and replaces part numbers: K120 and 1K120. (Part No: 1K120)
$79.95

Crankshaft Retainer, Rear - For tractor models White 2-70, (1650, 1655, White 2-78, White 4-78 SN# 147569 and up), (1850 SN# 150421 and up), (1550, 1555, White 2-62 SN# 160000 and up), (1750 SN# 180537 and up), (1950T SN# 194080), (1755, 1855, 1955 SN# 220000 and up). Replaces 162508AS, 155717AS, 303142574. (Part No: 168150AS)
$96.71

Freeze Plug - Package of 10. Verify OEM part number of 159312A, 7208009, 731356V1. For tractor models 1850, 2-105, 2-110, 2-85. (Part No: 731356M1)
$10.92

Ring Gear, Flywheel - This ring gear has 123 teeth and measures 15.506 inches outside diameter and 14.310 inside diameter. For model 1850 diesel. (Part No: 161318A)
$56.90

Rocker Arm (LH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 41151483)
$18.90

Rocker Arm (RH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 41151484)
$17.55

Valve Guide - For tractor models (66 up to SN# 6503), Super 55, Super 66, (550 up to SN# 72831), 77, (Super 77 up to SN# 6503), 770, 88, (Super 88 up to SN# 6502), (880 up to SN# 13681), 1850. All with gas engines. Price shown is for each, sold only in multiples of 2 items. (Part No: 106614A)
$3.29

Valve Guide, Exhaust - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 3343J002)
$4.84

Valve Guide, Exhaust - For tractor models 1600, 1650, 1655, 1750, 1850. All with one of the following engines, 265 6 cyl. gas, 283 CID 6 cyl. gas, 310 6 cyl. gas. Price shown is for each, sold only in multiples of 6 items. (Part No: 106620A)
$9.91

Valve Guide, Exhaust - For model 1850 with 354 Cid 6 cylinder Perkins diesel engine. Price shown is for each, sold only in multiples of 6 items. (Part No: 159172A)
$5.44

Valve Guide, Intake - For Perkins Diesel. Replaces 33261731, 33261732, 3343F001, 3343F002, 3343F031, 3343F041, 3637056M1, 3640676M1, 4223073M1, 736297M1 (Part No: 3343F002)
$2.70

Valve Guide, Intake - For model 1850 with 354 CID 6 cylinder Perkins diesel engine. Price shown is for each, sold only in multiples of 6 items. (Part No: 159171A)
$5.03

Valve Key - Retainer. For model 1850 with 354 CID 6 cylinder Perkins diesel. Price shown is for each, sold only in multiples of 4 items. (Part No: 159039A-PR)
$4.71

Valve Retainer, Pack of 4 - Lock/key. For tractor models 1600, 1650, 1655, 1750, 1850, Super 55, Super 66, (550 SN# 72831 and up), (Super 77 SN# 6503 and up), 770, 88, 880. All with one of the following engines 144 CID 4 cyl. Diesel, 216 CID 6 cyl. diesel, 231 CID 6 cyl. diesel, 265 CID 6 cyl. gas or diesel, 283 CID 6 cyl. gas, 310 CID 6 cyl. gas. (Part No: 70209103)
$1.26

Valve Spring, Exhaust - For tractor models 1600, 1650, 1655, 1750, 1850, (770 SN# 13682 and up), (880 SN# 13682 and up). All with one of the following engines. 216 CID 6 cyl. diesel, 265 CID 6 cyl. gas or diesel, 283 CID 6 cyl. gas, 310 CID 6 cyl. gas. Price shown is for each, sold only in multiples of 6 items. (Part No: 106573A)
$9.03

Valve Spring, Inner - For model 1850 with 354 CID 6 cylinder Perkins Diesel engine. Price shown is for each, sold only in multiples of 4 items. (Part No: 159616A)
$3.34

Valve Spring, Intake - For tractor models 1600, 1650, 1655, 1750, 1850, (770 SN# 13682 and up), (880 SN# 13682 and up). All with one of the following engines. 216 CID 6 cyl. diesel, 265 CID 6 cyl. gas or diesel, 283 CID 6 cyl. gas, 310 CID 6 cyl. gas. Price shown is for each, sold only in multiples of 6 items. (Part No: 159026A)
$15.11

Valve Spring, Outer - For model : 1850 with 354 CID 6 cylinder Perkins diesel engine. Price shown is for each, sold only in multiples of 4 items. (Part No: 159189A)
$4.07

Valve, Exhaust - Exhaust Valve for tractor models 1750, 1850. Both with either 283 CID 6 cyl. gas or 310 CID 6 cyl. gas engines. (Part No: 169431A)
$62.62

Valve, Exhaust - Exhaust Valve for model 1850 with 354 CID 6 cylinder Perkins diesel engine. Price shown is for each, sold only in multiples of 2 items. (Part No: 159187A)
$15.13

Valve, Intake - Intake Valve for tractor models 1750, 1850. Both with either 283 CID 6 cyl. gas or 310 CID 6 cyl. gas engines. (Part No: 155730A)
$27.03

Valve, Intake - Intake Valve for model 1850 with 354 CID 6 cylinder Perkins diesel engine. Price shown is for each, sold only in multiples of 2 items. (Part No: 159188A)
$9.16

Engine Pistons and Sleeves
Piston - For AD3.152 Perkins Diesel. With engine serial number less than 2820092.Price is per piston. (Part No: 68332)
$29.63

Piston - Single piston. For tractor models 5542, 7300, 7600, White 2-105, White 2-85, 1850, 1950 all with 6.354 Perkins diesel engine. (Part No: 86740)
$40.78

Piston - for Model 1850 (Part No: 30-3083276)
$42.21

Piston & Sleeve Kit - 310 CID 6 cylinder gas engine. Kit contains sleeves, 3-7/8" pistons, pins, retainers and rings. For model 1850 (Part No: PK312)
$1258.80

Piston & Sleeve Kit - Contains sleeves, 3-7/8" pistons, pins, retainers, top chrome and bottom oil control ring set. For model 1850, 1950, White 2-105, White 2-85 with 354 CID 6 cylinder diesel engine. (Part No: PK316)
$486.67

Piston Pin Bushing - 2 used per rod. For tractor models (66 to SN# 6503), Super 55, Super 66, (550 to SN# 72831), 77, (Super 77 to SN# 6503), 770, 88, (Super 88 to SN# 6502), (880 to SN# 13681), 1600, 1650, 1655, 1750, 1850. Price shown is for each, sold only in multiples of 4 items. (Part No: 102633A)
$13.85

Piston Pin Bushing - For model 1850 with 354 CID 6 cylinder diesel engine. Price shown is for each, sold only in multiples of 2 items. (Part No: 733767M1)
$4.49

Piston and Sleeve Kit - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: U5MK0034)
$53.25

Sleeve - Liner for 1 cylinder. For model 1850 with 354 CID 6 cylinder diesel engine. (Part No: 736507M3)
$43.17

Sleeve & Piston Kit - 3 7/8 Bore. For tractor models 1850, 1855, 1950 with 310 Waukesha Gas Engine. (Part No: R3962)
$1065.69

Engine Rings
Engine Rings - (For 1 piston) for Model 1850 (Part No: 159903AS)
$21.72

Engine Rings - (for 1 piston) for Model 1850 (Part No: 30-3083268)
$21.72

Piston Rings - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 47P347)
$16.13

Ring Set - For 1 piston. Can replace 738404M91, 745769M91. For model 1850 with 354 CID 6 cylinder diesel engine. (Part No: 836583M91)
$38.79

Exhaust System
Exhaust Stack, Chrome, Curved - Double walled, 36 inches tall (not including base), 5 1/2 inch base, 2 15/16 inch inside diameter, 5 inch outside diameter. For tractor models (1650 diesel), 1655, 1750, 1755, 1800, 1850, (1855 gas). (Part No: R5903)
$233.89

Muffler - Vertical. Inlet I.D. 3-1/4", outlet O.D. 3-1/2", length 36 inches. Replaces OEM# 164961A. For tractor models 1850, 1950T, 1955, 2050, 2150 all with diesel engines. (Part No: R1737)
$147.82

Muffler, Vertical - With heat shield. Inlet I.D. 2-15/16", outlet O.D. 2-1/2", length is 34 inches. Replaces OEM# 104764A, 155980A, 164080A. For 1650 & 1655 diesel, plus 1750 & 1755 gas or diesel, 1800 & 1850 (Gas, LP & Diesel), 1855 gas. (Part No: R1100)
$53.79

Muffler, Vertical - Oval, Inlet I.D. 2-15/16", outlet O.D. 2-1/2", length 32. Replaces OEM# 30-3040828. For 1650 & 1655 diesel, 1750, 1755, 1850 (Gas & Diesel), 1855 Gas. (Part No: R1735)
$144.67

Fuel System / Air Intake
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Oliver and White models. Replaces: 157990A, 159088A, 162004A. (Part No: T23262)
$2.22

Air Cleaner Pipe Grommet - For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950T, 1955. Replaces 157767AS, 104151A. (Part No: 158086AS)
$15.75

Carburetor Kit, Basic - Kit for Zenith 13750 carb used on 1750, 1755, 1800, 1850, 1855. (Part No: Z106)
$26.25

Carburetor, New - Original Zenith Design w/ reversible linkage - Replaces Marvel Schebler numbers USX29, USX32, USX32-1, USX33, USX37, USX40, USX43, USX44 and Zenith number 13209. Note: If choke linkage rubs on block move to other side of carburetor or modify block to provide clearance. (Part No: R7939)
$655.50

Carburetor, Rebuilt - Fits 1750, 1800, 1850 - replacement for OEM USX29, USX32-1, USX37, USX44. Add $100.00 core charge to price (will be added after order is placed when ordering online) - this charge is refundable if you send your core to us. (Part No: 1928-CARB)
$265.60

Carburetor, Rebuilt - Fits 1750, 1755, 1800, 1850 - replacement for OEM 13750. Add $100.00 core charge to price (will be added after order is placed when ordering online) - this charge is refundable if you send your core to us. (Part No: 1929-CARB)
$265.60

Fuel Filler Grommett - (BLACK) 2 7/16" I.D. - 3 5/8" O.D.. Replaces Oliver OEM# 100619A & 72162460 & 30-3209865. For tractor models Super 55, Super 66, Super 77, Super 88 (DSLs) 550, 660, 770, 880, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2255. Replaces White OEM# 100619A & 72162460 & 30-3209865. For tractor models WHITE 2-78 & 4-78. (Part No: R4805)
$18.75

Fuel Filter, Final - Fuel Filter for tractor models 550, 660, 770, 880, 1600, 1650 up to serial number 187586, 1550, 1555. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. All with Diesel Engines. Replaces 609689AS, 159044AS, 159044AS, 20-7100980, 20-7100980 243190601. (Part No: CAV7111296)
$2.79

Fuel Filter, Primary - For tractor models 550, 770, 880, 990, 995, 1550, 1600, 1650, 1800, 1850, 1900, 1950. For tractors with the Roosa-Master injection system. (Part No: 156289AS)
$9.41

Fuel Pump - (2 Bolt Mount) for tractor models: (1850, White 2-85, and 2-105 with Perkins 6-354 Diesel Engine). Replaces White p/n 31-2752377, Perkins 2641372. (Part No: 159252AS)
$35.69

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Part No: 2N9166)
$1.55

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 1J-5304, 1J5304. Gasket may be cork or rubber, depending on availability. (Part No: NAA9160A)
$1.95

Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet``Includes a 5/16" line compression adapter fitting. Fuel Strainer Assembly. For tractor models 550, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950T, 2150, White 2-44, White 2-62, White 2-70, White 2-78, (66, Super 66, 77, Super 77, 88, Super 88 with modification, shorten stand pipe to fit). Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces JAS841. (Part No: 61782C91)
$16.46

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 1BS-5307A, 1J-5307 (Part No: 49923D)
$3.09

Gauges
Ammeter Gauge - For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1950, 1855, 1955, 1950T, 2050, 2150, White 2-62, White 2-78, White 4-78. Replaces 158583A (Part No: S.53141)
$22.50

Fuel Gauge - 12 volt negative ground. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1900, 1850, 1950, 1855, 1955, 1950T, 2050, 2150, White 2-62, White 2-78, White 4-78. Replaces 155558A. (Part No: S.53143)
$25.41

Oil Pressure Gauge - 80 psi. For tractor models 1750, 1850, 1855, 1950, 1950T, 1955, 2050, 2150. (Part No: 159565A)
$24.67

Oil Pressure Gauge - 50 psi. For tractor models 1550, 1650, 1850, 1555, 1655, White 2-62, White 2-78, White 4-78. (Part No: 158584A)
$24.53

Tachometer Cable-60 Inches Long - For tractor models 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255 (4WD), 1550, 1555, 1650, 1655, White 2-78, White 2-70 (diesel only). (Part No: 100579AS)
$36.38

Temperature Gauge - 12 volt negative ground. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1900, 1850, 1950, 1855, 1955, 1950T, 2050, 2150, White 2-62, White 2-78, White 4-78. Replaces 155557A, 30-3031659. (Part No: S.53142)
$25.41

Hitch / Drawbar
Drawbar - 42.375 inches long, 2.50 inches wide, 1.50 inches high. For tractor models 1750, 1755, 1850, 1855, 195 Workhorse, 20, White 2-105, White 2-110, White 2-150, White 2-88, 2255, White 4-150, White 4-175, White 4-180. (Part No: 163581A)
$327.79

Drawbar Roller - For tractor models 1750, 1755, 1800, (1850 SN# 150421 and up), (1855 SN# 220000 and up), 1870, 1900, (1950 SN# 150421 and up), (1950T SN# 194080 and up), (1955 SN# 220000 and up), (2050 SN# 204001 and up), White 2-105, White 2-110, White 2-150, (2150 SN# 204001 and up), (2255 SN# 235650 and up), 2270, White 2-85, White 2-88, White 4-150. (Part No: 104627A)
$28.29

Drawbar Roller End Plate - For tractor models 1750, 1755, 1800, 1850, 1855, 195 Workhorse, 20, White 2-105, White 2-110, White 2-150, White 2-85, White 2-88, White 4-150, 2255. (Part No: 104629A)
$19.14

Drawbar Roller Pin - For tractor models 1750, 1755, 1800, 1850, 1855, 195 Workhorse, 20, White 2-105, White 2-110, White 2-150, 2255, White 2-85, White 2-88, White 4-150. (Part No: 104628A)
$41.69

Front Drawbar Support - For tractor models 1750, 1755, 1850, 1855, 195 Workhorse, 20, White 2-105, White 2-110, White 2-150, 2255, White 2-85, White 2-88, White 4-150, White 4-175, White 4-180. (Part No: 163582A)
$128.62

Hydraulic System
Hydraulic Gear Pump, Main - For tractor models 1600, 1650, 1750, 1800, 1850, 1950, White 2-70. This pump is for open center system. Notice: If old pump has bolt-on cast iron suction discharge fitting with relief valve, this pump will not fit applications. (Part No: 303062449)
$589.77

Lights
09/19/2019RK - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 105774A, 166407A, 30-3169898, 735606A (Part No: 28A116)
$11.91

Headlight - Fender mounted. For tractor models 1600, 1800, 1900, 1550, 1650, 1750, 1850, 1950, 2050, 2150, 1555, 1655, 1755, 1855, 1955, 2255. (Part No: 164089AS)
$26.84

Headlight - (12 Volt) Fender Mount. For model s:1650, 1655, 1800, 1850, 1900, 1950, White 2-78, White 4-78. (Part No: 105340AS)
$21.27

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: L4411LED)
$48.10

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, 103463A, 607525A, 20-7302436, 31-2492920, 32-0006203. (Part No: 373662R91)
$8.48

Light Switch - For tractor models White 2-62, White 2-78, White 4-78, 1550, 1555, 1650, 1655, 1850, 1950. (Part No: K7354C)
$12.35

Oil System
Oil Fill Cap - This oil fill cap comes complete with chain. It is used on Oliver / White 1850, 2-105, 2-110, 2-85, 2-88. Replaces 159389A, 168030A, 2101484, 70251082, AJR4054 (Part No: 734962M91)
$4.34

Oil Filter - For tractor models 1650, 1655, (1750 diesel SN# 202441 to 203482), 1755, (1800 SN# up to 124396), 1850, 1855, (1950T SN# 194080 and up), (1955 SN# 220000 and up). (Part No: W156149AS)
$20.70

PTO / Driveline
Damper Clutch - This is a solid hub that replaces the spring loaded dampener type hub, 17 internal splines. For tractor models White 4-175, (1850 diesel SN# 150421-194007). Replaces 158573A, 166080AS. (Part No: 165988A)
$180.42

PTO Clutch Plate, Driven - For tractor models 1550, 1555, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-62, White 2-70, White 2-78, White 4-78. Replaces 105651A. (Part No: 159097A)
$14.50

PTO Clutch Plate, Driven - 6.00 inch outside diameter, 4.255 inch inside diameter. For tractor models 1550, 1555, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-62, White 2-70, White 2-78, White 4-78. (Part No: 105650A)
$31.56

PTO Drive Hub - That bolts to flywheel, 17 internal spline, 5.375 inch diameter, 6 bolt holes. For tractor models 1850, White 2-150, 2270. (Part No: 303083330)
$155.82

PTO Drive Shaft - 67.125" long. For tractor models (1750 SN# 180537 to 190957), 1800, (1850 SN# 150421 to 194007), 1900, 1950. (Part No: 103897A)
$495.56

PTO Pilot Hub - For model 1850 diesel. (Part No: 165989A)
$96.68

PTO Shaft - For tractor models 1750, 1755, 1850, 1855, 1950. This shaft has 17 splines and is 67.000"long. (Part No: 163463A)
$470.18

PTO Shaft - For tractor models 1750, 1755, 1850, 1855, 1950, White 2-105. This shaft has 17 splines and is 67.125"long. (Part No: 303054527)
$440.80

PTO Shaft, 1000 RPM - 21 spline. For tractor models 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255, White 2-85, White 2-88, White 2-105, White 2-110, White 2-150. (Part No: 167698A)
$146.14

PTO Shaft, 540 RPM - For White/Oliver: 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255, (White 2-85, 2-88, 2-105, 2-110, 2-150), G955. PTO Shaft - 21/6 Splines, 540 RPM rating. (Part No: 158281A)
$117.56

PTO Shield - For tractor models 1750, 1850, 1950, 1950T, 2050, 2150. (Part No: 158349A)
$68.57

Seats
Seat Assembly - Black Vinyl on Steel. Fits tractor models: 1255, 1355, 1450, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2055. (Part No: R0983)
$468.63

Seat Assembly - Cranberry Vinyl sides and Fabric Face on Steel. For tractor models 1255, 1355, 1450, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2055. (Part No: R2450)
$308.10

Seat Back - Fits 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2150, 2155, 2255. Also fits WHITE 2-85, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180. White Vinyl -Steel. Replaces 30-3139603, 158788AS (Part No: R0874)
$168.36

Seat Bottom - Fits 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2150, 2155, 2255. Also fits WHITE 2-85, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180. White Vinyl with steel frame. Measures 17 1/8 inches deep, 19 inches across the front, 15 inches across the back. For 2 mounting rails, 7.25 inches apart. (Part No: R0873)
$142.18

Seat Upper Back - White Vinyl on Steel For 1255, 1355, 1450, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2055 (Part No: R2022)
$78.61

Steering
Power Steering Cylinder Link Arm - For tractor models (2255 SN# 235650), (1850 wheatland & IND. SN# 150421 and up), (1800, 1900 wheatland or IND.), (1950 wheatland & IND SN# 150421 or row crop SN# 157355 and up), (1750 wheatland SN# 180537 and up), (1950T wheatland SN# 194080 and up), (1755, 1855, 1955 all wheatland SN# 220000 and up). VERIFY OEM PART NUMBER TO ENSURE CORRECT FIT. (Part No: 157164A)
$89.52

Spindle, RH/LH - Measures A= 16.250", B= 1.50", C= 1.625", D= 1.250". For tractor models 1550, 1555, 77, 770, 88, 880, (1600, 1655 SN# 147569 and up), (1850 SN# 150421 to 169758), (1750 SN# 180537 to 201090). Replaces KS713A, 161341A. The wheel bearing kit used on this spindle is kit part number WBKWH4. (Part No: 161340A)
$260.68

Spindle, RH/LH - Measures A= 16.250", B= 1.747", C= 1.750", D= 1.375". For tractor models 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, White 2-105, White 2-110, White 2-70, White 2-78, White 85, White 2-88, White 4-78. The wheel bearing kit used on this spindle is kit part number WBKWH1. (Part No: 161959A)
$178.64

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .640 inch, bottom tie rod hole is .750 inch. From center of splined hole to a line between the center of tie rod holes is 5.25 inches. For tractor models (1550, 1555, 1650 all with adjustable axles), (1600 with adj. axles SN# 124420 and up), (1655 adj axles narrow tread SN# 147569 and up), (1750 adj. axles narrow tread SN# 180537 and up), (1755, 1855 adj. axles marrow tread SN# 220000 and up), (1800 adj. axles SN# 115377 and up), (1850 adj. axles SN# 150421 to 168127), (White 2-62 with adj. axles SN# 160000 to 168915). (Part No: 107010A)
$242.77

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .740 inch, bottom tie rod hole is .640 inch. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, (1850 regular tread SN# 168128 and up), 1855, 1950, 1950T, (1955 with 10 spline shaft). (Part No: 161424A)
$335.78

Steering Arm, Center - This is the same as 161424A except tapered holes are drilled from opposite direction, .640" dia at top of hole and .740" dia at bottom of hole. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555, 1955 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, 1850, 1855, 1950, 1950T. (Part No: 161424SPL)
$334.61

Steering Arm, Center - For tractor models (1555, 1600, 1655, 1750, 1755, 1850, 1855 wll with wheatland axles). (Part No: 303106772)
$189.93

Steering Arm, Center - center bolt is .625". For tractor models 1555, 1655, 1750, 1755, 1850, 1855, 195 all with set back axles. Used with K6758C shaft. (Part No: 160289A)
$366.27

Steering Arm, Center - Center bolt is .750". For tractor models 1555, 1655, 1750, 1755, 1850, 1855, 195. Used with K6748C shaft. (Part No: 166446A)
$275.35

Steering Arm, Center - Used with 30-3045684 shaft. For tractor models 1555, 1655, 1750, 1755, 1850, 1855, 195. (Part No: 303045692)
$279.15

Steering Shaft - 9.160" long, 10 spline. For tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, (White 2-62, White 2-78, White 4-78 all industrial). Replaces 155800A, 107009A. (Part No: 303110311)
$234.31

Steering Shaft, Center - 8.780" long, 1.250" O.D. small end. Used with 160289A center steering arm. For tractor models (1555, 1655, 1750, 1850, 1950 all with short wheel base). (Part No: K6758C)
$280.18

Steering Wheel 11/16 Hub - 15" diameter, 11/16" splined shaft, dished, covered spokes. For tractor models (550 late), 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150. Also replaces 30-3051951. (Part No: 159082A)
$54.51

Steering Wheel 13/16 Hub - 15" Diameter - 13/16" x 36 Splined Hub - 4 1/2" Deep - 3 Covered Spokes. (Part No: 30-3051951)
$43.40

Steering Wheel Cap - Black Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Part No: 101431AA)
$55.44

Steering Wheel Cap - Black Face for power steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150 (Part No: 101432AA)
$64.14

Steering Wheel Cap - White Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Part No: 101431A)
$55.44

Steering Wheel Cap - White face for power steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Part No: 101432A)
$55.44

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Super 55, Super 66, Super 77, Super 88, Super 99, 1555, 1600, 1650, 1750, 1850, 1800, 1900, 550, 60, 70, 80, 66, 660, 77, 770, 88, 880, 90, 950, 99, 990, and 995. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 915090, 72162485, and S170. (Part No: 353435X1)
$0.45

Tie Rod Assembly - For tractor models 1555, 1600, 1655, 1750, 1755, 1800, 1850, 1855, 1955, White 2-70, (White 2-105 SN# 255216 TO 271913), (White 2-85 SN# 263341 TO 271719), 1650. Replaces 662201. (Part No: 164210AS)
$66.17

Wheels
Front Rim-Heavy Duty - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces 100014A, 30-3040003, K905277, K907805, G57046, K914312, 3114166R91 (Part No: FW55166)
$61.84

Front Wheel Hub - For tractor models G750, 1650, 1655, White 2-78, White 2-85, White 4-78, (1850 regular/narrow adj. tread), (1750 with adj. narrow tread), (1550, 1555, White 2-62 all with short wheel base), (1800 with 4W adj. tread), (White 2-44, 550 all with fixed tread front axle SN# 121808 and up). (Part No: 155193A)
$93.49

Front Wheel Hub - For tractor models White 2-70, White 2-85, (1750, 1755 all with adj. tread), (1650, 1655, White 2-78, White 4-78 all with extra hi-clearance), (1850, 1855 all with reg narrow adj. tread). (Part No: 161963A)
$85.70

Front Wheel Hub, 6 Bolt - Outer bearing cup 2.326" O.D. check dimensions before ordering hub. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, White 2-62, White 2-78, 77, 770, 88, 880, Super 55, White 2-44, White 2-4412, White 2-4413L, White 2-4414, White 2-446. (Part No: 155192A)
$152.12

Front Wheel Hub, 6 Bolt - Outer brg. cup 2.873" O.D. check dimensions before ordering hub. For tractor models 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, White 2-105, White 2-110, White 2-70, White 2-78, White 2-85, White 2-88, White 4-78. (Part No: 303363651)
$181.10

Front Wheel Nut & Bolt Set - For White: 1550, 1555, 1650, 1655, 175, 1750, 1755, 180, 1800, 1850, 1855, 1950, 1955, 2150, 2155, 2255, 400, 544, 70, 77, 770, 88, 880, M Front Wheel Nut & Bolt Set of TEN 10. Bolts are 9/16 Inches x 1 1/2 inches. Zinc Plated Nuts. (Part No: WB916-bolt_nuts)
$42.75

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 100094A, T14752. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Part No: C0NN1058A)
$3.53

Wheel Bearing Kit - For one wheel. For tractor models 1550, 1555, (1600 SN# 147569 and up), 1655, (1750 SN# 180537-201090), (1850 SN# 150421-169758), White 2-44, White 2-4412, White 2-4413, White 2-4413L, White 2-4414, White 2-446, 62, 6215, 77, 770, 78, 7815, 88, 880, Super 55. Kit contains 1 each of the following p/n LM501349, LM501310, LM67048, LM67010, 163101A. (Part No: WBKWH4)
$29.34

Wheel Bearing Kit - Kit conains 1 of each of the following 25877 bearing, 25821 bearing cup, 25580 bearing, 25520 bearing cup, 163101A seal. For tractor models Field Boss 185, 1650, 1655, 1750, 1755, 1850, 1855, 1870, 1950, 1950T, 1955, White 2-105, White 2-110, White 2-150, White 2-70, White 2-78, White 2-85, White 2-88, White 4-78, Field Boss 185. (Part No: WBKWH1)
$31.25

Wheel Bolt - This wheel bolt fits the following tractor models: Super 55, Super 66, Super 77, Super 88, 550, 60, 66, 660, 70, 88, 880, 1550, 1555, 1600, 1650, 1655, 1755, 1800, 1850, 1855, 1900, 1950T, 1955, 2050, 2150, 2255, 77, 770, 2-62, 2-105, 2-110, 2-135, 2-150, 2-155, 2-70, 2-78, 2-85, and 2-88. It has an overall length of 1 15/16 inches, a thread size of 9/16 – 18 UNF, and thread length of 1 1/2 inches. Replaces part number: 1H706A. (Part No: WB916)
$1.58



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$33.95

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8 inch deep throat x 2-1/8 inch high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$86.25

Cooling System
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$70.77

Radiator Drain Tap - This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. This is 1/4 inch NPT 18 thread. Please verify size and thread count before ordering. Replaces: 1KS517, KS517, S2634. (Part No: C9NN8115A)
$3.75

Zip Leak - Industrial Radiator Stop Leak - A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.23

Decals and Emblems
Oliver Shield Decal - 3/4 inch. printed on vinyl. Decal size is 3/4 inch by 3/4 inch. (Part No: R5239)
$2.33

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.05

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$12.71

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$12.29

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$86.46

Battery Hold Down - Universal hold down for batteries that measure 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$16.55

Battery Hold Down - Universal Battery Hold down. Verify your battery measurements. This will fit a 9 3/16 inches long and 7 3/16 inch wide battery. (Part No: 1111-0147)
$13.43

Battery Hold Down Bolts - Pair - These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$10.47

Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

Battery Thermal Wrap - 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.83

Coil Bracket - Universal Coil Bracket (Part No: R1940)
$3.57

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40611)
$45.43

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40511)
$36.05

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40111)
$45.43

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Coil has 1.5 Ohms of resistance. (Part No: 40011)
$44.90

Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40601)
$45.43

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40501)
$40.51

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40001)
$40.51

Coil, Ultra High Performance (Black), Epoxy Filled - This coil is used with Ignitor II ignition kits. Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Delivers up to 45, 000 volts, enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45111)
$50.16

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$43.40

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 0.6 Ohms resistance. For use with Ignitor II Electronic Ignition Module. (Part No: 45001)
$44.66

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.12

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$4.83

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$2.85

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$13.40

Spark Plug Wire Set, Universal, 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! NOTE

Starter Switch - Used on models with 6 volt manual starters. Replaces B7392A (Part No: 9N11450A)
$11.76

Starter Switch - 4-position: LEFT=accessories, CENTER=off, RIGHT accessories and ignition, FAR RIGHT start. 4 stud terminals. 7/16 inch long mounting stem with 3/4 inch dia. 2 brass keys. 1 1/8 inch mounting nut. This does not fit all models. (Part No: 782979)
$7.13

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$24.30

Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Engine Gaskets
Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.70

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$7.97

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$10.47

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It is useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$4.52

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89020C)
$78.88

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$114.46

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$129.84

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$85.96

Muffler Clamp, 1-1/2 - New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.19

Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.93

Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Muffler Clamp, 1-5/8 - New Clamp for 1-5/8 inch outside diameter muffler inlet. (Part No: MC158)
$2.93

Muffler Clamp, 1-7/8 - New Clamp for 1-7/8 inch outside diameter muffler inlet. (Part No: MC178)
$1.94

Muffler Clamp, 2 - New Clamp for 2 inch outside diameter muffler inlet. (Part No: MC200)
$2.91

Muffler Clamp, 2-1/2 - New Clamp for 2-1/2" outside diameter Muffler Inlet (Part No: MC212)
$3.30

Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.14

Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Muffler Clamp, 2-3/8 - New Clamp for 2-3/8 inch outside diameter muffler inlet. (Part No: MC238)
$2.84

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4 - New Clamp for 3 1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2 - New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.50 inch pipe. (Part No: R1798)
$5.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.84

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$7.25

Rain Cap - This rain cap is for a 2.250 inch pipe. (Part No: R1801)
$7.23

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$7.10

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.02

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$9.39

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$8.57

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Stainless Steel Clamp, 2 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90869A)
$5.42

Stainless Steel Clamp, 2.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

Stainless Steel Clamp, 3 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90873A)
$5.57

Stainless Steel Clamp, 3.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.42

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Part No: S.43231)
$10.29

Carburetor Elbow & Strainer - Fits some Oliver and Cockshutt models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$4.83

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$4.86

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$4.79

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$4.14

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$33.23

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$56.83

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4 inches long and holes up to 3/8 inches in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$21.14

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.00

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042 inches thick, 3 foot section. (Part No: FTW494)
$4.13

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$12.80

Marvel-Schebler Service Manual - This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.20

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$7.98

Gaskets
Gasket Material, Cork Rubber - 3/32 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR332)
$15.75

Gasket Material, Cork Rubber - 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

Gasket Material, Exhaust Manifold - 1/16 inch thick x 12 inches wide x 28-1/2 inches long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$20.78

Gasket Paper, .0160 - .0160 inch x 18 inches x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$15.79

Gasket Paper, .0275 - .0275 inch thick x 18 inches wide x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$24.15

Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$2.99

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.95

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$12.95

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.88

Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.03

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.68

Temperature Gauge, Universal - Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$17.69

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$5.97

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

HITCH BALL 10000LB 2-5/16 - 2-5/16 inch BALL SIZE, 1-1/4 inch STUD THREAD, 2-1/2 inch STUD LENGTH, 10000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 inch BALL SIZE, 1-3/8 inch STUD THREAD, 2-5/8 inch STUD LENGTH, 15, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$25.04

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$13.37

HITCH BALL 3500LB - Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

HITCH BALL 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

LINCH PIN, 10 Pack - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$3.30

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Part No: BUSH04)
$0.92

Linch Pins, Pack of 10 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Linch Pins, Pack of 10 - Package of 10 linch pins. 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Enter 1 for package of 10. (Part No: DKLP91)
$2.55

Linch Pins, Pack of 10 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$247.02

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Part No: 49A29)
$24.02

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

Universal Stabilizer Chain Kit - Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$4/9.47

Universal Stabilizer Chain Kit - Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$49.47

Hydraulic System
Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Part No: GG400)
$10.62

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Nuts (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: SPB40)
$4.91

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

HUB with BRG CUPS - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)
$109.42

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Tail Wheel Assembly - 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$14.67

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. (Part No: S.61357)
$12.56

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792)
$32.03

Miscellaneous
Canopy - 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$75.80

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

Canopy, Small Tractors - 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$155.22

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

Oil System
Lucas Heavy Duty Oil Stabilizer (quart) - A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$15.12

PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$201.19

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: AB4111WY)
$187.82

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

Overrun Coupler with Quick Release - This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. (Part No: S.23639)
$42.92

PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

Acrylic Hardener, 16oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$42.20

Acrylic Hardener, 8oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$22.04

Aluminum Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$49.02

Black Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$49.02

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447GAL)
$58.92

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$21.99

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447SP)
$44.19

Paint, Cockshutt Red, 1 Quart - This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP185QT)
$20.61

Paint, Cockshutt Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP185SP)
$47.78

Paint, Cockshutt Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP175GAL)
$60.68

Paint, Cockshutt Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP175QT)
$26.06

Paint, Cockshutt Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP175SP)
$52.74

Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550GAL)
$44.00

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$44.00

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700QT)
$20.58

Paint, Grey Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700SP)
$44.19

Paint, Med. Green, 1 Gallon - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP221GAL)
$44.00

Paint, Med. Green, 1 Quart - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP221QT)
$17.55

Paint, Med. Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP221SP)
$44.19

Paint, Oliver Yellow, 1 Gallon - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP224GAL)
$77.54

Paint, Oliver Yellow, 1 Quart - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP224QT)
$35.75

Paint, Oliver Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP224SP)
$47.78

Paint, Red Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$44.19

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$44.00

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225QT)
$17.55

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225SP)
$44.19

Paint, Yellow Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2720GAL)
$44.00

Paint,Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.*** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550SP)
$44.19

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)
$68.39

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)
$28.23

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)
$99.22

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Part No: E844Q)
$22.47

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

Seats
Pan Seat, Universal - 17 inch wide Gold zinc plated, 3-1/2 inch center to center on mounting holes, 1/2 inch by 1/2 inch center square. (Part No: B1865)
$54.12

Seat Belt - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22)
$41.67

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT)
$17.79

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056)
$1437.23

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3/4 inches deep). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)
$102.91

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. Additional $30 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1050ATSP)
$89.37

Seat, Universal - BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. Add $30 additional shipping per seat due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1060ATSP)
$89.37

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$82.25

Seat, Universal - Seat assembly, black leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BK)
$146.35

Seat, Universal - Seat assembly, blue leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BL)
$113.74

Seat, Universal - Seat assembly, yellow leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110YL)
$110.68

Tie-On Seat Cover - Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R1016)
$36.00

Tie-on Seat Cover - Green & Red, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R2603)
$36.00

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)
$182.49

Universal Seat - Universal Vinyl seat has Multiple mounting holes, ranging from 4 inch to 11 inch center to center (front to back) and 6-1/2 to 13 inch center to center (side to side). Customer needs to verify it will work for their tractor. Seat cushion width is 18 inches. An adapter plate may need to be made for some models. Slide track for forward/rear adjustment. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. (Part No: TS1100)
$113.34

Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1040ATSP)
$82.25

Sheet Metal / Body Parts
2 Hour DVD - The How To of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$25.68

Battery Hold Down Bolt - These J-Bolts are 10 3/4 inches long with 5/16 inch 18 UNC thread. There is 2 inches of thread. Verify measurements before ordering. Replaces original part numbers 198185A1, 393161R1. (Part No: 198185A1)
$3.75

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R0140)
$31.59

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Part No: RPD112K)
$146.93

SAFETY STEP KIT - Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$53.12

Toolbox, RED - This RED universal toolbox fits various tractor models. It measures 11 inches long, 4 inches wide, and 4 1/2 inches tall. The mounting holes must be drilled to match your tractor. (Part No: ABC308)
$41.99

Toolbox, Universal - Universal Toolbox Approx. 16 1/4 Inches X 4 3/4 Inches X 5 Inches. This is a Universal Part and Color varies depending on availability. (Part No: R2685)
$33.29

Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Part No: ABC1417)
$40.50

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Part No: R3275)
$7.13

Steering Wheel Spinner, Black - Comes with mounting hardware. (Part No: R3276)
$7.08

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Part No: R3279)
$8.03

Steering Wheel Spinner, Green - Comes with mounting hardware. (Part No: R3278)
$7.20

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Part No: R6323)
$8.86

Steering Wheel Spinner, Red - Comes with mounting hardware. (Part No: R3277)
$8.75

Tools
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)
$15.23

Chain Binder - 1/4 inch chain binder, 2600 pound load limit. (Part No: LL104)
$36.73

Chain Binder - 3/8 inch chain binder, 5400 pound load limit. Use with either 5/16 inch or 3/8 inch chain. (Part No: LL105)
$42.63

Chain Binder - 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

Combination Wrench Set - This combination wrench set is 11 pieces. Each wrench is made of chrome vanadium steel. This set comes in a handy storage rack and includes a LIFETIME UNCONDITIONAL WARRANTY. The SAE sizes range from 1/4 to 7/8 inch. (Part No: W1061)
$12.60

Cotter Pin Assortment - This pin assortment contains 150 pieces, all in a convenient re-sealable plastic case. It includes sizes of: 1/8 inch x 2 inches, 5/32 inch x 2 1/2 inches, 3/16 inch x 3 inches, 1/4 inch x 2 inches, 1/4 inch x 3 inches, 5/16 inch x 2 1/2 inches. (Part No: W5206)
$10.76

Cotter Pin Assortment, Small - 560 piece assortment of 1/16 inch x 1 inch, 3/32 inch x 1 inch, 3/32 inch x 1-1/2 inches, 1/8 inch x 1-1/4 inches, 1/8 inch x 2 inches, 5/32 inch x 2-1/2 inches. All in convenient re-sealable plastic case. (Part No: W5205)
$7.98

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inches with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$29.21

GREASE GUN - GREASE GUN. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$29.17

GREASE GUN - Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$20.66

GREASE GUN - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$36.00

GREASE GUN CLAMP - Clamp holds all 2-1/4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: GC102)
$11.21

GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$134.19

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$288.95

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$403.25

GREASE HOSE 12 INCH - 12 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G115)
$11.62

GREASE HOSE 18 INCH - 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G118)
$10.59

Hair Pin Assortment - This hair pin assortment contains 150 pieces. It includes 6 different sizes from: 3/32 x 1 3/16 inches to 5/32 x 2 15/16 inches. All in a convenient re-sealable plastic case. (Part No: W5210)
$6.57

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S58474)
$267.39

Hobby Tool Kit - This is a complete knife kit. It comes with a 3 inch caliper, tweezers, a precision screwdriver, 28 blades, and a carrying case. (Part No: W1709)
$18.87

Hose Clamps Assortment - This hose clamp assortment contains 26 pieces, all in a convenient re-sealable plastic case. It includes sizes of: 5/8 inch, 7/8 inch, 1 inch, 1 1/16 inches, 1 1/4 inches and 1 1/2 inches. (Part No: W5348)
$6.83

Main Seal Installer/Remover - This kit helps with the removal and installation of upper rear main seals on many tractor engines without removing the engine or the crankshaft. This kit contains a corkscrew removal tool, a T-handle, and a wire with a clip for pulling new seals into their place. It also includes 2 extra clips. (Part No: W84019)
$5.33

O-Ring Assortment - This O-ring assortment contains 407 pieces in 32 different sizes, all in a convenient re-sealable plastic case. Each O-ring is made of a high quality nitrile butadiene rubber and range in size from 1/4 inch outside diameter to 2 1/4 inches outside diameter. (Part No: W5202)
$13.95

Rotary Tool Kit - This 80 piece rotary tool kit includes: a hand held rotary tool that turns at 1600 rpm, cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone, and drill bits. This kit is great cutting, grinding, polishing, sharpening, and drilling. (Part No: W50083)
$13.49

Rubber Grommet Assortment - This rubber grommet assortment contains 125 pieces in 18 different sizes, all in a convenient re-sealable plastic case. The sizes range are from 1/8 inches x 9/32 inches to 1 inches. (Part No: W5214)
$7.91

Screwdriver Set - This screwdriver set is 30 pieces. It contains 7 screwdrivers that range in size from 1/4 to 6 inches, a magnetic bit driver, 6 precision screwdrivers, and 14 power bits, all contained in a plastic rack. (Part No: W1718)
$18.54

Spring Assortment - This spring assortment contains 200 pieces. It includes compression type sizes from: 9/32 inch x 1/2 inch to 7/32 inch x 1 1/2 inches and extension type sizes from: 13/64 inch x 13/16 inch to 11/32 inch x 1 7/16 inches. (Part No: W5200)
$6.87

T-Handle Hex Key Set - This T-Handle hex key set is 10 pieces (SAE). Each key is made of a high quality carbon steel with a black oxide finish that resists corrosion. The PVC T-Handle grips are added for better torque and comfort. This set also comes with a mountable hand storage rack. The sizes are: 3/32 inch, 7/64 inch, 1/8 inch, 9/64 inch, 5/32 inch, 3/16 inch, 7/32 inch, 1/4 inch, 5/16 inch and 3/8 inch. (Part No: W80274)
$14.90

Valve Spring Tool - Universal valve spring tool compresses springs without needing to remove the cylinder head. For most overhead valve engines. It's adjustable cam handle keeps the tool correctly adjusted for the entire job. It comes with a complete list of instructions. (Part No: W80567)
$23.43

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$22.48

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002)
$110.33

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$110.33

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001)
$124.13

Wire Terminal Assortment - This wire terminal assortment is 160 pieces and contains 19 of the most popular sizes and types of wire terminals. This kit comes in a convenient re-sealable plastic case. (Part No: W5213)
$13.13

Woodruff Key Assortment - This key assortment contains 80 pieces. All in a convenient re-sealable plastic case. It includes 10 of each of the following sizes: 3 x 5 x 13 MM, 3 x 6.5 x 16 MM, 4 x 5 x 13 MM, 4 x 6.5 x 16 MM, 4 x 7.5 x 19 MM, 5 x 7.5 x 19 MM, 5 x 9 x 22 MM, and 6 x 9 x 22 MM. (Part No: W5341)
$9.54

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: 100014A, 30-3040003 (Part No: FW60166)
$61.71

Power Adjust Rim - 11 inch x 28 inch, 4-rail type. For double ramp clamp. Holes in rail for stop body screw are drilled parallel to axle (not at angle). Use with stop body C0NN1057A, stop body screw C0NN1058A, clamp E5NN1043AA. Fits tire size 12.4 inches x 28 inches, 13.6 inches x 28 inches. Additional $25.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: 100086A. (Part No: C5NN1050H)
$405.80

Rear Rim Carriage Head Bolt and Nut - 2.5 length, 5/8 diameter FF Carriage Head Bolt with nut. (Part No: HB250)
$3.75

Stop Body - Fits various tractors models with power adjust rims. Replaces part numbers: 100093A and T19271. (Part No: C0NN1057A)
$14.67

TIRE GAUGE - Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$11.79

TIRE GAUGE DIAL - Precision Bourdon Tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$13.07

Tire Bead Buster - Handy for breaking the bead when removing tires. No electricity, pneumatics or hydraulics needed. (Part No: S.29300)
$429.75

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)
$40.14

Tire Inner Tube - This Tire Inner Tube is used with 4.00 x 12, 4.50 x 12 and 4.80 x 12 tires. Has a TR-13 valve stem. Valve height 1.38 inch, diameter 0.46 inch. (Part No: 400X12TB)
$17.25

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 500X15TB)
$16.00

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Part No: E844Q)
$22.47

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: WHS050)
$16.43

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: WHS060)
$41.39

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: WHS059)
$51.89

Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: WHS058)
$43.47

Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: WHS061)
$53.89

Tire Tube 32 Inch - This tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: WHS062)
$48.74

Tire Tube 34 and 36 Inch - This tire tube is used for all tractors with the following tires: 10.00 x 34, 11.00 x 34, 11.2 x 34, 12.00 x 34, 12.4 x 34, 10.00 x 36, 11.00 x 36, 11.2 x 36, and 12.4 x 36. (Part No: WHS063)
$54.80

Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Part No: WHS064)
$53.48

Tire Valve Fluid Adapter - FOr ballast. (Part No: S.61167)
$20.92

Tire and Tube - This 4.00 inch x 12 inch 3 rib tire comes with a tube and fit various tractor models. (Part No: 400x12-3)
$55.57

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 550X16)
$50.99

Tire, Three Rib - This is a Triple Rib, 4 ply 4.50 X 12 triple. This tire is not designed for tubeless use. Uses 400X12TB tube, sold separately. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 450X12)
$44.65

Tire, Three Rib - Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 650X16)
$77.43

Tire, Three Rib - Front Tire, 3 Rib, 5.00 inches x 15 inches. Designed to be used with tube (part number 500X15TB). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 500X15)
$51.77

Tire, Three Rib - Front Tire, 3 Rib, 6.00 inches x 16 inches. Designed to be used with tube (part number WHS050). 4 Ply. Additional $25 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 600X16)
$63.35

CategoriesAll 1850 Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Oliver 1850 Manuals
1850 I&T Aftermarket Shop Manual 154 Pages (Part No: O-202) $32.95

1850 G,LP,D Service Manual 564 Pages (Part No: OL-S-1850,1950) $81.95

1850 G,LP,D Parts Manual 440 Pages (Part No: OL-P-1850) $62.95

1850 G,LP,D Operators Manual 120 Pages (Part No: OL-O-1850) $29.95

Miscellaneous Related Items
Tune-up DVD
Oliver and Cockshutt - Gas Models - Covers gas versions of Oliver and Cockshutt 1550, 1555, 1600, 1650, 1655, Oliver 77, Super 77, 88, Super 88, 770, 880, 1750, 1755, 1800, 1850 & 1855. Shows how to fine tune your tractor to make it run like it should. The carburetor, distributor, oil and filter change, brake replacement or adjustment, fluid levels and more are discussed in this video. 54 minutes. (Part No: JDV-03050)
$24.00

Rebuild DVD
Oliver and Cockshutt - Gas Models - Covers gas versions of Oliver and Cockshutt 1550, 1555, 1600, 1650, 1655, Oliver 77, Super 77, 88, Super 88, 770, 880, 1750, 1755, 1800, 1850 & 1855. You'll see the engine disassembled down to the bare block and then rebuilt to increase horsepower over factory rating. The many tips and techniques will be helpful to anyone interested in stock tractork pulling or just rebuilding your farm tractor. 70 minutes. (Part No: JDV-02950)
$24.00

Hat
Vintage Oliver solid green hat - The old split-shield style logo on a solid green hat. (Part No: VOSG)
$13.95

New Oliver solid green hat - The newer style Keystone logo on a solid green hat. (Part No: NOSG)
$13.95

Hart Parr solid green hat - 6 panel hat with brass size-adjuster, Hart Parr shield logo sewn on for durability. (Part No: HPSG)
$13.95