Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Oliver 1550 Tractor Parts

[ Show Pictures ]

[Categories]   [All Oliver Models]   [Print]  


Brakes
Brake Actuating Spring - Used with disc brakes. For tractor models Cockshutt 35, Cockshutt 40, Cockshutt 50, Cockshutt 540, Cockshutt 560, Cockshutt 570, Cockshutt Golden Arrow, Cockshutt Golden Eagle, Super 55, 550, (77 from serial number 347904 and up), Super 77, (88 from serial number 136899 and up), Super 88, 1550, 1555, 1600, 1650, 1655, 770, 880, White 2-70, White 2-78, White 2-62, White 4-78. Replaces A30897, A41816, 1L-2608, K-260.8. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105 inch. (Part No: A155624)
$1.74

Brake Actuator Disc - For tractor models White 2-70, (1650, 1655, White 2-78, White 4-78 serial number 147569 and up), (1550, 1555, White 2-62 serial number 160000 and up). (Part No: 10P3140)
$90.68

Brake Disc - 7 inch diameter, 4 inch Hub with 29 Splines. For tractor models 77, 88, 770, 880, 1550, 1555, 1600, 1650 and (White 2-62, 2-78, 4-78). (Part No: 106724A)
$22.23

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Sold individually. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Part No: M830T)
$2.79

Clutch
Clutch Bearing Carrier - Non greasable. For tractor models (1550, 1555 serial number 160000 and up), (1650, 1655 serial number 147569 and up), (White 2-62 serial number 160000 and up), White 2-70, (White 2-78, White 4-78 serial number 147569 and up), (770, 880 serial number 60501 and up). (Part No: 303057364)
$110.04

Clutch Disk - Organic, spring loaded 11 inch disc with 19 splines on a 1.562 inch hub . For tractor models Super 88 after SN# 6503, 1550, 1555, 1600, 2-62, 88 after SN# 6503 and 880 after SN# 6503. (Part No: 161153AS)
$85.48

Clutch Housing Tube - For tractor models 1550, 1555, 1650, 1655, White 2-44, White 2-62, White 2-70, White 2-78, White 4-78, 550. Measures 4.69 inches Length, 1.558 I.D., 1.685 O.D. (Part No: K585)
$29.70

Clutch Pilot Bearing - For tractor models 77, Super 77, (770 SN# 3150334 and up), 1550, 1555, 1600, 1650. (Part No: 30-3065162)
$10.74

Clutch Release Bearing - For tractor models 1550, 1555, 1600, 1650. 30-3056295 (Part No: N1087)
$20.33

Clutch Shaft - 21.25" long, 19 spline. For tractor models (1550, 1555, White 2-62 SN# 160000 and up with oo Hydra power or creep drive). (Part No: 160400A)
$237.86

Clutch Shaft Coupler - 3.37" long, 19 spline. For tractor models (1550, 1555, White 2-62 SN# 160000 and up without hydra power or creeper drive). (Part No: 160287A)
$110.81

Pressure Plate, New - NEW - 11 inch, 3 lever. For tractor models 1550, 1555, 1600, 2-62. Replaces 155916AS (Part No: 155916AS-R)
$202.85

PTO Clutch Disc - PTO Clutch Disc for tractor models Super 77, Super 88, 1550, 1600, 1555, 77, 770, 88, 880, White 2-62 IND. This Disc is 7.000" outside diameter and 1.000" inside diameter with 12 splines. Replaces 72500239, KS1656. (Part No: 156086A)
$53.48

Release Bearing Fork - Throwout Bearing Fork for Models: (1550, 1555 SN# 160000 and up), 160, (1650, 1655 SN# 147569 and up), 170 Workhorse, (1750 SN# 180537 and up), 1755, (1800, 1900 SN# 90525 and up), 185, (1850, 1950 SN# 150421 and up), (1855, 1955 SN# 220000 and up), (195 Workhorse, (2050, 2150 SN# 204001 and up), (White 2-105, White 2-110, (White 2-135 SN# 272595 to 292563), (White 2-150, White 2-155, White 2-180, (2255 SN# 235650 and up), 2270, (White 2-62 SN# 160000 and up), White 2-70, (White 2-78, White 4-78 SN# 147569 and up), White 2-85, White 2-88, White 4-150, White 4-175, White 4-180, White 4-225, 60 American, (770, 880 SN# 60501 and up), 80 American. Replaces 101510A. (Part No: 72160045)
$118.86

Cooling System
Engine Block Heater (3/4 inch NPT) - Fits Models: 550, 770, 880, 1450, 1465, 1470, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950T, 1955, 2050, 2150, White 2-44, White 2-62, White 2-78, White 4-78. 1000 Watts (Part No: 161820A)
$55.19

Fan, 4 Blade - 18" diameter, 1" pilot hole, 2- 4 bolt mount patterns at 2.89" & 1.765". For tractor models (1550, 1555 diesel SN# 160000 and up), 1600, (1650, 1655 diesel SN# 147569 and up), (1750 diesel SN# 180537 and up), (1755 diesel SN# 220000 and up), (White 2-62 diesel SN# 160000 and up), White 2-70 diesel, (White 2-78 diesel SN# 147569 and up), (88 SN# 44281 and up), (880 SN# 60501 and up), (G750 diesel SN# 147569 and up). (Part No: 168824A)
$111.31

Fan, 4 Blade - 16" diameter, 1.062" pilot hole, 2.875" bolt hole center. For tractor models White 2-44, (White 2-70 gas), 550, (White 2-78, White 4-78, 1650, 1655 gas SN# 147569 and up), (White 2-62, 1550, 1555 gas SN# 160000 and up), (770 SN# 60501 to 73638). (Part No: 156539A)
$102.96

Radiator - 2 inch inlet, 2-1/8 inch outlet may need to make hose adaptations for some tractors. For tractor models 1550, 1555, 1600, 1650, 1655, White 2-62, White 2-70, White 2-78, White 4-78 all with gas or diesel engines. Replaces OEM numbers 163342AS, 163343AS, MFG0176, 163272A, 163273A, 1652570. (Part No: R5089)
$454.89

Radiator Hose, Upper - A= 1.50", B= 2.00". For tractor models 1550, 1555. (Part No: 161214A)
$16.82

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: Super 55, Super 66, Super 77, Super 88, 60, 66, 77, 88, 90, 99, 550, 660, 770, 880, 900, 1550, 1555, and 1600. It does not come with a gasket. Replaces Oliver/White numbers 3112353, 311807, J-525, J-525A and Cockshutt T5380, T5406, 3112353. (Part No: R1852)
$44.99

Thermostat - This Thermostat opens at 180 degrees F. It is used on the following Oliver: 1550, 1600, 1650, 440, 550, 60, 66, 660, 77, 770, 88, 880, 90, 950, 99, Super 55, Super 66, Super 77, Super 88, Super 99. Replaces 101400A, 102148A (Part No: 70229927)
$14.25

Water Pump - For tractor models (1550, 1555, White 2-62 all gas with SN# 169846 and up and diesel with SN# 168921 and up). (Part No: 162804AS)
$231.30

Water Pump Pulley - For tractor models (1550, 1555, White 2-62 gas SN# 160000-169845 and diesel SN# 160000 and up), (White 2-44, 550 SN# 127365 and up). Inside diameter on the pulley side is 0.7430 inches and 0.818 inches on the opposite side. (Part No: 160926A)
$37.36

Water Pump Pulley - For tractor models 1850, (1550, 1555, White 2-62 ALL GAS SN# 169846>& DSL SN# 168921>), (1650, 1655, White 2-78, White 4-78 ALL SN# 187586>). This is a short double pulley. (Part No: 164041A)
$65.62

Water Pump with Pulley - Pump with long single pulley. For tractor models 1550 & 1555 both with gas SN# 16000-169845 & diesel SN# 16000-169820, White 2-44 SN# 127365 and up, White 2-62 gas SN# 16000-169845 & diesel SN# 16000-169820, 550 SN# 127365 and up. CASTING # 190460. (Please Note: Picture shows no pulley. Pump comes with the Pulley.) (Part No: 160927AS)
$303.89

Decals and Emblems
Decal Set - For 1550 Gas. Complete decal set. (Part No: R2613)
$85.33

Decal Set - For 1550 Diesel. Complete decal set. Made of Vinyl. (Part No: R2409)
$93.27

Drive Train
Coupler Sprocket - 2 used, 14 teeth, 19 spline. For tractor models (1550, 1555, White 2-62 SN# 160000 and up with Rev-o-torc drive), (1650, 1655, White 2-78, White 4-78 SN# 147569 and up without hydro power or creeper drive), (White 2-70 without Over under hydro shift). (Part No: 107275A)
$161.32

Coupler Sprocket, Front - 2.50" seal area diameter, 14 teeth, 30 spline. For tractor models (1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1950T, 1955 with Hydra power or creeper drive). (Part No: 107415A)
$69.45

Coupler Sprocket, Rear - 19 spline. For tractor models (1550, 1555, 1600, 1650, 1655 all with hydra power, O/U hydra shift, creeper drive). (Part No: 155533A)
$68.92

Gear Shift Boot - For tractor models 550, 660, 770, 880, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255, (White 2-70, 2-85, 2-105, 4-150, 4-180), 60 American, 80 American, Super 55, 60, 66, Super 66, 70, 77, Super 77, 88, Super 88. (Part No: BA916A)
$7.47

Shift Knob - For tractor models Super 44, Super 55, Super 66, Super 77, Super 88, Super 99, 60, 70, 66, 77, 88, 660, 770, 880, 950, 990, 995, 1550, 1650, 1750, 1800, 1850, 1950, 1950T, 2050, 2150, 1555, 1655, 1755, 1855, 1900, 1955, 2255, 2-44, 2-70, 2-85, 2-88, 2-105, 100, 120, 125 WORKHORSE, 140, 145 WORK HORSE, 160, 170, 185, 195. Replaces 103098A, and 72160047. (Part No: B909A)
$3.51

Electrical System
Alternator - 12 volt, 55 amp. For tractor models (550, 552 1963 to 1967 with 144 gas), (770 1966 to 1967 with 232 gas or diesel and 1963 to 1967 with 144 gas or 216 diesel), (880 1963 to 1967 with 144 gas or 216 diesel), (1350, 1550 1966 to 1969), (1555 1969 to 1974 with 232 gas or diesel), (1650 1964 to 1971 with 265 or 283 gas), (1655 1969 to 1974 with 265 gas or diesel), (1750 1967 to 1968 with 288 gas or 310 diesel), (1755 1969 to 1974 with 283 gas or 320 diesel), (1850 1964 to 1968 with 310 gas or 354 diesel), (1855 1969 to 1971 with 310 gas or diesel), (1950 1964 to 1968 with DD 4-53 and 1969 with 212 diesel), (1950T 1967 to 1969 with 310 diesel), (1955 1969 to 1971 with DD 4-53), (1955T 1969 to 1971 with 310 diesel). Replaces 1100725, 1100720, 1100805. (Part No: ADR0231)
$99.36

Condenser - For tractor models White 2-62, White 2-78, White 4-78, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855. (Part No: 159770A)
$9.22

Distributor, New - This New Distributor, with Tach Drive is complete with points, condenser, rotor and cap. It is used on (Cockshutt; 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855), (Oliver; 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 77, 770, 88, 880, Super 77, Super 88), (White; 2-62, 2-70, 2-78, 4-78). This distributor will be a direct replacement for distributors with tachometer drives. If you have a tachometer drive just below your distributor, you will have to remove the drive assembly and create a cover plate and gasket to cover the hole where the tachometer drive is removed. You will then use the tachometer drive on the distributor. This is a mechanical advance distributor. If you have a vacuum advance, you will no longer use vacuum advance. For tune up, order ATK1DCR points, rotor and condenser, and 21A443 Cap. Replaces 158859AS, 1K7324, 1111702, 1111750, 1KA7324, 101129AS, 60261-C, 60261C, 30-3417778, D2563-1AA, 156126-AS, 156126AS, 1112632, 1112603, 106106AS. (Part No: R8119)
$317.40

Starter - For (770 Diesel 1967-69), (1550, 1555, 1650, 1655, 1770, 1755, 1855 Diesel, all 1967-72). REBUILT Starter. 12 Volt. Replaces 1900461M91. There will be a Core Charge of $60.00 added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 113139)
$384.72

Starter Solenoid - This is a 12 volt, 4 post solenoid. Fits Oliver: (1550, 1600, 1650, 1750, 1755, 1850, 1855, 1950T, 1955, 770, 880 ALL Diesel), 77 with starter 1119778, 88 Diesel with starter 1113075. Cockshutt 560 (Diesel (sn C07401 and up)), Cockshutt 570 (Diesel (sn DO10001 and up), White 2-105, White 2-110, White 2-85, White 2-88. Replaces MAO-1096 , 101069AS, 159711AS. (Part No: 1115510)
$15.84

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 105386A, 105386A, 1K7392A, 1K7392C, 72160068, 7A7392, K7392A, T18524, TG07803, TO18117, TO7803. (Part No: R7994)
$11.25

Tune Up Kit, Mallory Distributors - Includes points, condenser. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, White 2-70. (Part No: 6806R)
$27.83

Voltage Regulator - 12 volt, Replaces Delco 1119515. For tractor models (1550, 1555 SN# up to 168918), (770 SN# 116746 to 156836). Replaces 1119515. (Part No: 166626A)
$20.61

Voltage Regulator - Voltage regulator, 12-volt. For Oliver tractors using Delco alternators Following Delco Alternators: 1100553, 1100557, 1100558, 1100566, 1100567, 1100568, 1100569, 1100570, 1100572, 1100590, 1100591, 1100662, 1100742, 1100750, 1100751, 1100778, 1100780, 1100787, 1100790, 1100791, 1100796, 1100797, 1100804, 1100810, 1100816, 1100817, 1100818, 1100834, 1100836, 1100837, 1100838, 1100839, 1100842, 1100843, 1100845, 1100846, 1100847, 1100849, 1100851, 1100856, 1100860, 1100870, 1100871, 1100875, 1100879, 1100883, 1100885, 1100886, 1100888, 1100889, 1100891, 1100892, 1100893, 1100895, 1100896, 1100905, 1100907, 1100908, 1100910, 1100916, 1100917, 1100921, 1100931, 1100932, 1100933, 1100939, 1100943, 1100944, 1100951, 1102943, 1102944, 1102945, 1119507. Replaces 157651AS, 166626A, 30-3001806 (Part No: 1031060M91)
$11.88

Engine Bearings
Main Bearing Set - Available in STD, .010, .020, .030 For 77, Super 77, 770 Gas or Diesel1550, 1555 Diesel. Specify size in Comments box when ordering. (Part No: MS-406P)
$129.36

Rod Bearings - For (77, Super 77, 770 Gas or Diesel), 1550 and 1555 both with Diesel. These are for the 2 inch Rod Journal. Price is for 1 piston rod. 6 required per engine. Available in STD, .010 and .020. Specify in comment section size needed. (Part No: CB-446P)
$30.91

Rod Bearings - For (77, Super 77, 770 Gas or Diesel), 1550 and 1555 both with Diesel. These are for the 2.25 inch Rod Journal. Price is for 1 piston rod. 6 required per engine. Available in .STD, .010, .020, .030 Oversize. (Part No: CB-451P)
$26.52

Rod Bearing Set, .010 - This .010 oversize Rod Bearing Set is a complete set of 6 pairs of bearings. This set fits models: Super 77 gas and diesel, 770 gas and diesel, 88 gas and diesel, 1600 gas, 1650 gas, 1655 gas, 1550 gas and diesel, 1555 gas and diesel. (Part No: CRK-W026-010)
$100.55

Rod Bearing Set, .020 - This Standard size Rod Bearing Set is complete for one six cylinder engine. This kit fits models: Super 88 gas and diesel, 1600 diesel, 1650 diesel, 1655 diesel, 1800A gas and diesel, 1750 gas and diesel, 1755 gas and diesel, 1800B gas and diesel, 1800C gas and diesel, 1850 gas, 1855 gas and diesel, 1955 diesel. (Part No: CRK-W036-020)
$101.66

Rod Bearing Set, .030 - This .030 oversize rod bearing set is a complete set of 6 pairs of bearings. This set fits models: Super 77 gas and diesel, 770 gas and diesel, 88 gas and diesel, 1600 gas, 1650 gas, 1655 gas, 1550 gas and diesel, 1555 gas and diesel. (Part No: CRK-W026-030)
$104.58

Rod Bearing Set, .030 - This standard size rod bearing set is complete for one six cylinder engine. This kit fits models: Super 88 gas and diesel, 1600 diesel, 1650 diesel, 1655 diesel, 1800A gas and diesel, 1750 gas and diesel, 1755 gas and diesel, 1800B gas and diesel, 1800C gas and diesel, 1850 gas, 1855 gas and diesel, 1955 diesel. (Part No: CRK-W036-030)
$96.46

Rod Bearing Set, .040 - This .040 oversize rod bearing set is a complete set of 6 pairs of bearings. This set fits models: Super 77 gas and diesel, 770 gas and diesel, 88 gas and diesel, 1600 gas, 1650 gas, 1655 gas, 1550 gas and diesel, 1555 gas and diesel. (Part No: CRK-W026-030)
$104.58

Rod Bearing Set, Standard - This Standard Rod Bearing Set is a complete set of 6 pairs of bearings. This set fits models: Super 77 gas and diesel, 770 gas and diesel, 88 gas and diesel, 1600 gas, 1650 gas, 1655 gas, 1550 gas and diesel, 1555 gas and diesel. (Part No: CRK-W026-STD)
$103.50

Engine Gaskets
Crankshaft Seal, Front - Will not replace the original Rope Seal. Rope Seal not available. For tractor models using an updated Timing Cover: (66 gas SN# up to 6503), (Super 55, Super 66, 550 gas or diesel up to SN# 72831), (77 gas or diesel), (Super 77, 770 diesel SN# after 6503), (Super 77, 770 gas), (88 gas or diesel), (1600, 1650, 1655 gas), (1550, 1555 diesel). 2.75" OD, 2.05" ID, 0.44" Thick (Part No: 1K126)
$10.62

Full Gasket Set - Less Rear Main Seal and Timing Cover Seal. For 77, Super 77, 770 Gas or Diesel1550, 1555 Diesel (Part No: FS1919)
$215.68

Oil Pan Gasket - For tractor models (77, Super 77, 770 gas or diesel), (1550, 1555 diesel). (Part No: OS31415)
$14.72

Engine Parts
Crankshaft Retainer, Rear - For tractor models White 2-70, (1650, 1655, White 2-78, White 4-78 SN# 147569 and up), (1850 SN# 150421 and up), (1550, 1555, White 2-62 SN# 160000 and up), (1750 SN# 180537 and up), (1950T SN# 194080), (1755, 1855, 1955 SN# 220000 and up). Replaces 162508AS, 155717AS, 303142574. (Part No: 168150AS)
$96.71

Engine Pistons and Sleeves
Sleeve & Piston Kit - This is a 3 5/8 Overbore kit with sleeves, pistons, pins and retainers. For tractor models 77, Super 77, 770 Gas or Diesel l550, 1555 Diesel. (Part No: R1998)
$498.75

Exhaust System
Exhaust Stack, Chrome, Curved - Double walled, 24" Tall, 2 3/8 Inch I.D., 3 1/2 Inch O.D., Curved back top. For tractor models 66, 77, 88, Super 66, Super 77, Super 88, 660, 770, 880, 1550, 1600, (1650 gas). (Part No: R4455)
$135.44

Manifold Adapter Kit - Includes 2 studs and 2 clamps. Used with manifolds 161818A, 161158A, 101339A and 1M425. For tractor models 77, 770, Super 77, 1550, 1555. Replaces: STUD: 102375A, CLAMP: 101777A (Part No: 101777A)
$46.23

Manifold - Exhaust - For Gas Engines in 77, Super 77, 770, (Will work for 1550, 1555 if slots are ground in manifold to accommodate studs in head.) Replaces OEM# 161818A. Uses gasket set R0900G. Uses manifold adapter kit 101777A. (Part No: 161158A)
$192.92

Manifold Gasket Set - For tractor models 1550, 1555, 77, Super 77, 770. Used with intake manifolds 1M425, 101339A and exhaust manifolds 161158A, 161818A. (Part No: R0900G)
$39.93

Manifold, Intake - For Gas Engines in 77, Super 77, 770, 1550, 1555. Replaces OEM# 1M425. Uses gasket set R0900G. Manifold adapter kit 101777A also available. (Part No: 101339A)
$165.93

Muffler - Less heat shield, 2-3/8" inlet. For tractor models Super 77 gas & diesel SN# 47552 and up, Super 88 gas & diesel SN# 49250 and up, 770 gas & diesel except orchard, 880 gas & diesel, 1465 & 1470 diesel, 1550 & 1555 gas & diesel except utility, 1600 gas & diesel, 1650 & 1655 gas. Replaces 10069A, 155623A & 166486A. (Part No: 164079A)
$35.27

Fuel System / Air Intake
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Oliver and White models. Replaces: 157990A, 159088A, 162004A. (Part No: T23262)
$6.68

Air Cleaner Pipe Grommet - For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1950T, 1955. Replaces 157767AS, 104151A. (Part No: 158086AS)
$15.75

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Oliver and White tractors, it is used on the following carburetors: TSX49, TSX120, TSX138, TSX168, TSX181, TSX186, TSX221, TSX363, TSX374, TSX380, TSX384, TSX397, TSX399, TSX405, TSX418, TSX477, TSX581, TSX603, TSX610, TSX665, TSX738, TSX755, TSX791, TSX807, TSX811, TSX868, TSX880, TSX903, USX29, USX32, USX32-1. These carburetors are possible on the following models 2-44, 2-70, 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 99, Super 99, Super 44, Super 55, Super 66, 440, 550, 900, 950, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, OC-4, OC-9, OC-12. Replaces 1H7610, H7610 (Part No: CT29-81)
$4.99

Carburetor Kit, Basic - Kit for Marvel TSX903, TSX775, TSX374, TSX181, TSX221, TSX610, TSX755 carbs used on 1550, 1555, 550, 66, 660, 77, 88, 880, Super 77, Super 88. (Part No: MS102)
$16.50

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 77, 88HC, Super 88, 770, Super 77, 880, 1550, Industrials using Continental FG226 Engine. Replaces Marvel-Schebler numbers TSX181, TSX374, TSX610, TSX755, TSX903, TSX499, TSX397, TSX755, TSX903, TSXU835, TSXU836. Center to center on the 2 mounting bolts is 2 3/8 inches. Made in USA, 1 year warranty. (Part No: 14991)
$524.40

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX903. For the following tractor models: 1550. Add $50.00 core charge to price (will be added after order is placed when ordering online) - you will receive instructions for returning your core for a refund if you have one available. (Part No: 1922-CARB)
$157.70

Fuel Filler Grommett - (BLACK) 2 7/16" I.D. - 3 5/8" O.D.. Replaces Oliver OEM# 100619A & 72162460 & 30-3209865. For tractor models Super 55, Super 66, Super 77, Super 88 (DSLs) 550, 660, 770, 880, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1900, 1950, 1955, 2050, 2150, 2255. Replaces White OEM# 100619A & 72162460 & 30-3209865. For tractor models WHITE 2-78 & 4-78. (Part No: R4805)
$18.75

Fuel Filter - The fuel filter measures 3 7/16 inches diameter, 2 3/4 inches tall. Comes with two large and one small rubber seal rings. Replaces A51346, A37187, A39109, G45288, 45288, 3602788R91, 309991, C3TZ9365B, 86546599, 309531, C3TA9176A, C3TZ9155B, C3TA9155B, 1021350M91, 1021351M1, 835944M91, 1596257M91, 1021351M3, A35668, 70000-14632, 7000014632 (Part No: 309991)
$24.63

Fuel Filter, Final - Fuel Filter for tractor models 550, 660, 770, 880, 1600, 1650 up to serial number 187586, 1550, 1555. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. All with Diesel Engines. Replaces 609689AS, 159044AS, 159044AS, 20-7100980, 20-7100980 243190601, 163953AS. (Part No: CAV7111296)
$4.35

Fuel Filter, Primary - For tractor models 550, 770, 880, 990, 995, 1550, 1600, 1650, 1800, 1850, 1900, 1950. For tractors with the Roosa-Master injection system. (Part No: 156289AS)
$9.77

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Part No: 2N9166)
$2.28

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 1J-5304, 1J5304. Gasket may be cork or rubber, depending on availability. (Part No: 2NAA916061)
$1.71

Precleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractor models 880, 950, 990, 995, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1855 gas only, 1900, 1950, White 2-70. Can replace Donaldson Bowl part number P02-0227. Replaces 101965A. (Part No: R28794)
$6.26

Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet Includes a 5/16" line compression adapter fitting. Fuel Strainer Assembly. For tractor models 550, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950T, 2150, White 2-44, White 2-62, White 2-70, White 2-78, (66, Super 66, 77, Super 77, 88, Super 88 with modification, shorten stand pipe to fit). Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces JAS841. (Part No: 61782C91)
$17.21

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 1BS-5307A, 1J-5307 (Part No: 49923D)
$3.12

Gauges
Ammeter Gauge - For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1950, 1855, 1955, 1950T, 2050, 2150, White 2-62, White 2-78, White 4-78. Replaces 158583A (Part No: S.53141)
$22.50

Fuel Gauge - 12 volt negative ground. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1900, 1850, 1950, 1855, 1955, 1950T, 2050, 2150, White 2-62, White 2-78, White 4-78. Replaces 155558A. (Part No: S.53143)
$26.69

Oil Pressure Gauge - 50 psi. For tractor models 1550, 1650, 1850, 1555, 1655, White 2-62, White 2-78, White 4-78. (Part No: 158584A)
$24.53

Tachometer Cable-60 Inches Long - For tractor models 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255 (4WD), 1550, 1555, 1650, 1655, White 2-78, White 2-70 (diesel only). (Part No: 100579AS)
$36.38

Temperature Gauge - 12 volt negative ground. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1900, 1850, 1950, 1855, 1955, 1950T, 2050, 2150, White 2-62, White 2-78, White 4-78. Replaces 155557A, 30-3031659. (Part No: S.53142)
$25.41

Water Temperature Sender - Fits Models: 550, 770, 880, 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1900, 1850, 1855, 1950, 1950T, 1955, 2050, 2150, 2255, White 4-150, White 2-44, White 2-62, White 2-78, White 4-78. Also replaces OEM #30-3032132, 101612A (Part No: D5NN10884A)
$10.32

Water Temperature Sending Unit - The part may come with a spade terminal which might require changing your wire end. For tractor models 1550, 1550, 1650, 1655, 1755, 1855, 2255, 2270, White 2-44, White 2-62, White 2-78, White 4-150, White 4-180, White 4-78, 550. Replaces 30-3032132, 30-3127486.303485544 (Part No: D5NN10884A)
$10.32

Hitch / Drawbar
SWAY BLOCK - Sway Block, LH For tractor models White 2-70, 80 American, (1550, 1555, White 2-62 SN# 206349 and up), (1650, 1655, White 2-78, White 4-78 SN# 206824 and up). (Part No: 167570A)
$74.09

Sway Block, RH - For tractor models White 2-70, 80 American, (1550, 1555, White 2-62 SN# 206349 and up), (1650, 1655, White 2-78, White 4-78 SN# 206824 and up). (Part No: 167569A)
$71.97

Hydraulic System
Hydraulic Power Drive Filter - Fits tractor models 1550, 1555, 1750, 1755, 1800, 1900, 1950T, 1955. Used as Trans Pressure Lube Filter on models 1650, 1655, 1750, 1755, 1800, 1900, 1950T, 1955, 2050, 2255, White 2-70, White 2-85, White 2-88, White 2-105, White 2-110, White 4-150, White 4-175, White 4-180. Used as Reverse-O-Torc Filter on models White 2-62, White 2-78, White 4-78. Used as Over-under-Hyydraulic Shift Filter on models: 1650, 1655, 1750, 1755, 1950T, 1955, 2050, 2255, White 2-70, White 2-85, White 2-88, White 2-105, White 2-110, White 2-135, White 2-155, White 4-150. (Part No: 156513A)
$7.49

Lights
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 105774A, 166407A, 30-3169898, 735606A (Part No: 28A116)
$11.55

Headlight - Fender mounted. For tractor models 1600, 1800, 1900, 1550, 1650, 1750, 1850, 1950, 2050, 2150, 1555, 1655, 1755, 1855, 1955, 2255. (Part No: 164089AS)
$26.84

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2" measure directly across the top of the housing. For the following tractors: 60, 66, 70, 77, Super 77, 88, Super 88, 660, 770, 880, 80, 90, 99, Super 99, Super 44, Super 55, Super 66, 440, 500, 550, 900, 950, 990, 995, 1250, 1250A, 1255, 1265, 1355, 1365, 1450, 1465, 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, 1865, 1870, 1900, 1950, 1950T, 1955, 2-105, 2-150, 2-80, 2-85, 2050, 2055, 2150, 2155, 2255, 2270, 2655, 4-105, 4-150, 4-180, 4-80, 4-85. Replaces 53523D, AA3238R. (Part No: AA3238R)
$17.38

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: L4411LED)
$48.10

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, 103463A, 607525A, 20-7302436, 31-2492920, 32-0006203. (Part No: 373662R91)
$8.48

Light Switch - For tractor models White 2-62, White 2-78, White 4-78, 1550, 1555, 1650, 1655, 1850, 1950. (Part No: K7354C)
$12.35

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Part No: S.61357)
$18.75

Oil System
Oil Filter, Spin On - This Filter replaces the following B50, 74512207, 1069954M92, 104397A, 1032015M91, 1025034M91, 928055, HMF600L04340, 7000014641, 70000-14641, 4512207, 160770AS, 538836R1, 51051. Measures 3-11/16 inch outside diameter, 5-3/8 inch long, 5/8 inch number 16 thread. (Part No: 1069954M91)
$8.33

Oil Pressure Switch - For tractor models 1550, 1555, 1600, 1800, 1900, White 2-44, White 2-62, 550, 770, 880. (Part No: 101613A)
$12.06

PTO / Driveline
PTO Clutch Plate, Driven - For tractor models 1550, 1555, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-62, White 2-70, White 2-78, White 4-78. Replaces 105651A. (Part No: 159097A)
$14.50

PTO Clutch Plate, Driven - 6.00 inch outside diameter, 4.255 inch inside diameter. For tractor models 1550, 1555, 1650, 1655, 1750, 1800, 1850, 1900, 1950, White 2-62, White 2-70, White 2-78, White 4-78. (Part No: 105650A)
$31.56

PTO Clutch Spider - For tractor models White 2-70, (1650, 1655, White 2-78, White 4-78 serial number 147569 and up), (1550, 1555, White 2-62 serial number 160000 and up). (Part No: 163297A)
$357.46

PTO Drive Hub - This PTO Drive Hub bolts to flywheel. It has 12 internal splines and does NOT include 101803A bearing. . For tractor models 1550, 1555, 1600, 1650, 1655, 77, 770, 88, 880, (White 2-62, White 2-78, White 4-78 Industrials only). (Part No: 303068277)
$198.79

PTO Shaft - For tractor models (Super 77, 77 ALL ROW CROP SN# 320001>, STANDARD SN# 269001>, IND. SN# 403001>), (Super 66, 66, 660 ALL ROW CROP SN# 73132>), 1600 SN# 124420>, (1550, 1555, White 2-62 ALL SN# 60000>). Replaces 1K1200. Shaft is 10.07 inches long, 6 splines on each end. (Part No: 101689A)
$162.32

PTO Shaft, 540 RPM - 23 spline. For tractor models White 2-70, 60 American, 80 American, (1650, 1655, White 2-78, White 4-78 serial number 147569 and up), (1550, 1555, White 2-62 serial number 160000 and up). (Part No: 158287A)
$198.51

PTO Shaft Oil Seal - This seal fits the following tractor models as a PTO shaft oil seal: HG, OC3, OC4, Super 44, 1550, 1555, 1600, 1650, 1655, 440, 660, 770, and 880. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide. Replaces part numbers: 101691A, 10A20316, 112481, 114407, 452055A, and AT353. (Part No: 8N7052A)
$4.56

Seats
Seat Assembly - Cranberry Vinyl sides and Fabric Face on Steel. For tractor models 1255, 1355, 1450, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2055. (Part No: R2450)
$308.10

Seat Back - Fits 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2150, 2155, 2255. Also fits WHITE 2-85, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180. White Vinyl -Steel. Replaces 30-3139603, 158788AS (Part No: R0874)
$168.36

Seat Bottom - Fits 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2150, 2155, 2255. Also fits WHITE 2-85, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180. White Vinyl with steel frame. Measures 17 1/8 inches deep, 19 inches across the front, 15 inches across the back. For 2 mounting rails, 7.25 inches apart. (Part No: R0873)
$142.18

Seat Upper Back - White Vinyl on Steel For 1255, 1355, 1450, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2055 (Part No: R2022)
$78.61

Steering
Spindle, RH/LH - Measures A= 16.250", B= 1.50", C= 1.625", D= 1.250". For tractor models 1550, 1555, 77, 770, 88, 880, (1600, 1655 SN# 147569 and up), (1850 SN# 150421 to 169758), (1750 SN# 180537 to 201090). Replaces KS713A, 161341A. The wheel bearing kit used on this spindle is kit part number WBKWH4. (Part No: 161340A)
$260.68

Spindle, RH/LH - Measures A= 12.125", B= 1.50", C= 1.625", D= 1.250". For tractor models (1550, 1555 utility), (1650, 1655 utility SN# 147569), (White 2-62 utility), (White 2-78, 4-78, G750 all utility SN# 147569 and up). The wheel bearing kit used on this spindle is kit part number WBKWH4. (Part No: 107282A)
$223.37

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .640 inch, bottom tie rod hole is .750 inch. From center of splined hole to a line between the center of tie rod holes is 5.25 inches. For tractor models (1550, 1555, 1650 all with adjustable axles), (1600 with adj. axles SN# 124420 and up), (1655 adj axles narrow tread SN# 147569 and up), (1750 adj. axles narrow tread SN# 180537 and up), (1755, 1855 adj. axles marrow tread SN# 220000 and up), (1800 adj. axles SN# 115377 and up), (1850 adj. axles SN# 150421 to 168127), (White 2-62 with adj. axles SN# 160000 to 168915). (Part No: 107010A)
$242.77

Steering Arm, Center - Has 10 spline hole, top tie rod hole is .740 inch, bottom tie rod hole is .640 inch. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, (1850 regular tread SN# 168128 and up), 1855, 1950, 1950T, (1955 with 10 spline shaft). (Part No: 161424A)
$335.78

Steering Arm, Center - This is the same as 161424A except tapered holes are drilled from opposite direction, .640" dia at top of hole and .740" dia at bottom of hole. From center of splined hole to a line between the center of tie rod holes is 5 inches. For tractor models 1550, (1555, 1955 with 10 spline shaft), 1600, 1650, 1750, 1755, 1800, 1850, 1855, 1950, 1950T. (Part No: 161424SPL)
$334.61

Steering Arm, Center - 6 spline center hole, for use with small tie rods and 72160341 shaft. For tractor models (1550, 1555 regular tread SN# 160000 and up), (1650, 1655 row crop SN# 147569 and up), (1755 regular tread SN# 220000 and up), (1855, 1955 row crop SN# 220000 and up), (White 2-105 SN# 255216 to 271913), (2255 SN# 235650 and up), (White 2-62 regular tread SN# 160000 and up), White 2-70, (White 2-78 row crop SN# 147569 and up), (White 2-85 SN# 263341 to 271719), (White 4-78 row crop SN# 147569 and up). (Part No: 303089991)
$244.30

Steering Shaft - 9.160" long, 10 spline. For tractor models 1550, 1555, 1600, 1650, 1655, 1750, 1755, 1800, 1850, 1855, (White 2-62, White 2-78, White 4-78 all industrial). Replaces 155800A, 107009A. (Part No: 303110311)
$234.31

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Part No: 70224890)
$11.99

Steering Wheel 11/16 Hub - 15" diameter, 11/16" splined shaft, dished, covered spokes. For tractor models (550 late), 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1950T, 1955, 2050, 2150. Also replaces 30-3051951. (Part No: 159082A)
$54.51

Steering Wheel 13/16 Hub - 15" Diameter - 13/16" x 36 Splined Hub - 4 1/2" Deep - 3 Covered Spokes. (Part No: 30-3051951)
$43.40

Steering Wheel Cap - Black Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Part No: 101431AA)
$55.44

Steering Wheel Cap - White Face for manual steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Part No: 101431A)
$45.25

Steering Wheel Cap - White face for power steering. Models: 550, 660, 770, 880, 990, 1550, 1600, 1650, 1750, 1800, 1850, 1900, 1950, 2050, 2150. (Part No: 101432A)
$55.44

Steering Wheel, Keyed Hub - 3 spoke (covered). 18" diameter, 7/8" - 13/16" tapered shaft. For tractor models Super 55, 550, Super 66, 66, 660, (late 70 SN# 243686 & up), 77, 770, late 80, 88, 880, Super 77, Super 88, 1550 Rowcrop, 1555 Rowcrop, White 2-62, 1600, 1650 & 1800 (with manual steering), 99 & Super 99 (replaces 4 spoke wheel with 3 spoke). (Part No: 1B767C)
$44.16

Tie Rod, Long - A= 18.625", B= .750". For tractor models 1550, 1555, 1650, 1655, 1800, 1900, White 2-62, White 2-78, White 4-78, 770, 880. (Part No: 106673AS)
$60.18

Tie Rod, Short - A= 3.50", 11/16" diameter, 18 RH thread. For tractor models 1550, 1555, 1650, 1655, 1755, (1800 row crop SN# 90525 to 115376 and wheatland SN# 90525 and up), 1855, (1900 wheatland SN# 90525 and up), 1955, White 2-62, White 2-78, White 4-78, (60 row crop SN# 600001 and up), (770, 880 row crop). Replaces KS1160. (Part No: 107291AS)
$26.09

Tie Rod Tube - A= 19.56 inch, B= 11/16 inch inside diameter, 18 right hand thread. For tractor models 1550, 1555, 1650, 1655, White 2-62, White 2-78, White 4-78. (Part No: K6958A)
$61.41

Wheels
Front Wheel Hub - For tractor models G750, 1650, 1655, White 2-78, White 2-85, White 4-78, (1850 regular/narrow adj. tread), (1750 with adj. narrow tread), (1550, 1555, White 2-62 all with short wheel base), (1800 with 4W adj. tread), (White 2-44, 550 all with fixed tread front axle SN# 121808 and up). (Part No: 155193A)
$66.24

Front Wheel Hub, 6 Bolt - Outer bearing cup 2.326" O.D. check dimensions before ordering hub. For tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1800, 1850, 1855, White 2-62, White 2-78, 77, 770, 88, 880, Super 55, White 2-44, White 2-4412, White 2-4413L, White 2-4414, White 2-446. (Part No: 155192A)
$152.12

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 100094A, T14752. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Part No: C0NN1058A)
$3.53

Wheel Bearing Kit - For one wheel. For tractor models 1550, 1555, (1600 SN# 147569 and up), 1655, (1750 SN# 180537-201090), (1850 SN# 150421-169758), White 2-44, White 2-4412, White 2-4413, White 2-4413L, White 2-4414, White 2-446, 62, 6215, 77, 770, 78, 7815, 88, 880, Super 55. Kit contains 1 each of the following p/n LM501349, LM501310, LM67048, LM67010, 163101A. (Part No: WBKWH4)
$29.34

Wheel Bolt, Pack of 6 - This wheel bolt fits the following tractor models: Super 55, Super 66, Super 77, Super 88, 550, 60, 66, 660, 70, 88, 880, 1550, 1555, 1600, 1650, 1655, 1755, 1800, 1850, 1855, 1900, 1950T, 1955, 2050, 2150, 2255, 77, 770, 2-62, 2-105, 2-110, 2-135, 2-150, 2-155, 2-70, 2-78, 2-85, and 2-88. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number: 1H706A. (Part No: WB916)
$9.45



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$40.58

Cooling System
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$70.77

Decals and Emblems
Oliver Shield Decal - 3/4 inch. printed on vinyl. Decal size is 3/4 inch by 3/4 inch. (Part No: R5239)
$2.33

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$76.69

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$13.67

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$12.29

Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.47

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or a 6 volt system without the resistor. (Part No: D5TE12029AB)
$9.65

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.12

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$2.85

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Part No: CPN12259)
$13.86

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

Starter Switch - Used on models with 6 volt manual starters. Replaces B7392A (Part No: 9N11450A)
$7.71

Starter Switch - 4-position: LEFT=accessories, CENTER=off, RIGHT accessories and ignition, FAR RIGHT start. 4 stud terminals. 7/16 inch long mounting stem with 3/4 inch dia. 2 brass keys. 1 1/8 inch mounting nut. This does not fit all models. (Part No: 782979)
$7.13

Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$8.45

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$11.10

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$95.03

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$152.21

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$129.84

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$103.17

Muffler Clamp, 1-1/2 - New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.22

Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.99

Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$4.13

Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4 - New Clamp for 3 1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2 - New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$6.51

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$7.25

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$7.10

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$8.21

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$10.346

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Stainless Steel Clamp, 2.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$10.86

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.42

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Part No: S.43231)
$10.29

Carburetor Elbow & Strainer - Fits some Oliver and Cockshutt models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$5.13

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$37.65

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.90

Marvel-Schebler Service Manual - This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.95

Gaskets
Gasket Material, Cork Rubber - 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$3.08

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.95

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.88

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$15.23

Temperature Gauge, Universal - Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.37

Hitch / Drawbar
HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

Hitch Ball 10000LB 2-5/16 - 2-5/16 inch ball size, 1-1/4 inch stud thread, 2-1/2 inch stud length, 10000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516114)
$23.85

Hitch Ball 15000LB 2-5/16 - 2-5/16 inch ball size, 1-3/8 inch stud thread, 2-5/8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516138_)
$25.04

Hitch Ball 2000LB - 1-7/8 ball size, 3/4 stud thread, 1-3/4 stud length, 2000 LB MAX LOAD CAPACIRY, ONE CHROME hitch ball class. (Part No: CHB17834)
$13.37

Hitch Ball 3500LB - Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

Hitch Ball 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

Hitch Ball 5000LB 2-5/16 - Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Linch Pins, Pack of 10 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Linch Pins, Pack of 10 - Package of 10 linch pins. 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Enter 1 for package of 10. (Part No: DKLP91)
$3.15

Linch Pins, Pack of 10 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$247.02

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

Universal Stabilizer Chain Kit - Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$63.65

Universal Stabilizer Chain Kit - Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$63.65

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Nuts (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

HUB with BRG CUPS - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)
$109.42

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Tail Wheel Assembly - 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$27.74

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Miscellaneous
Canopy - 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

Canopy, Small Tractors - 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

Deluxe Canopy, 3 Bow - This UNIVERSAL Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100B)
$192.01

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

Acrylic Hardener, 16oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$42.20

Acrylic Hardener, 8oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$19.46

Aluminum Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$34.83

Black Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$49.02

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447GAL)
$58.92

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$21.99

Paint, Cockshutt Red, 1 Quart - This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP185QT)
$20.61

Paint, Cockshutt Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP175GAL)
$63.08

Paint, Cockshutt Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP175QT)
$26.06

Paint, Cockshutt Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP175SP)
$58.95

Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550GAL)
$44.00

Paint,Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.*** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550SP)
$44.19

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$44.00

Paint, Grey Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700SP)
$44.19

Paint, Med. Green, 1 Gallon - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP221GAL)
$44.00

Paint, Med. Green, 1 Quart - This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP221QT)
$17.55

Paint, Med. Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP221SP)
$44.19

Paint, Oliver Yellow, 1 Gallon - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP224GAL)
$80.94

Paint, Oliver Yellow, 1 Quart - This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP224QT)
$33.87

Paint, Oliver Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP224SP)
$47.78

Paint, Red Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$44.19

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$44.00

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225QT)
$17.55

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225SP)
$44.19

Paint, Yellow Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2720GAL)
$44.00

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)
$68.39

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)
$29.64

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)
$99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$201.19

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: AB4111WY)
$187.82

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Seats
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056)
$1437.23

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3/4 inches deep). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)
$102.91

Seat, Universal - BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. Add $30 additional shipping per seat due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1060ATSP)
$80.04

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$82.25

Seat, Universal - Seat assembly, black leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BK)
$146.35

Seat, Universal - Seat assembly, blue leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BL)
$113.74

Seat, Universal - Seat assembly, yellow leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110YL)
$110.68

Tie-on Seat Cover - Green & Red, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R2603)
$36.00

Tie-On Seat Cover - Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R1016)
$36.00

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)
$182.49

Universal Seat - Universal Vinyl seat has Multiple mounting holes, ranging from 4 inch to 11 inch center to center (front to back) and 6-1/2 to 13 inch center to center (side to side). Customer needs to verify it will work for their tractor. Seat cushion width is 18 inches. An adapter plate may need to be made for some models. Slide track for forward/rear adjustment. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. (Part No: TS1100)
$113.34

Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1040ATSP)
$82.25

Sheet Metal / Body Parts
2 Hour DVD - The How To of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$25.68

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R0140)
$31.59

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Part No: RPD112K)
$146.93

SAFETY STEP KIT - Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$53.12

Toolbox, RED - This RED universal toolbox fits various tractor models. It measures 11 inches long, 4 inches wide, and 4 1/2 inches tall. The mounting holes must be drilled to match your tractor. (Part No: ABC308)
$41.99

Steering
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Part No: ABC1417)
$44.46

Tools
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)
$15.23

Chain Binder - 1/4 inch chain binder, 2600 pound load limit. (Part No: LL104)
$36.73

Chain Binder - 3/8 inch chain binder, 5400 pound load limit. Use with either 5/16 inch or 3/8 inch chain. (Part No: LL105)
$42.63

Chain Binder - 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inches with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$33.05

Grease Gun - Grease Gun. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$29.17

Grease Gun - Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$20.66

Grease Gun - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$36.00

Grease Gun CLAMP - Clamp holds all 2-1/4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: GC102)
$11.21

Grease Gun PowerLuber 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$134.19

Grease Gun PowerLuber 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$288.95

Grease Gun PowerLuber 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$403.25

Grease Hose 12 Inch - 12 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G115)
$11.62

Grease Hose 18 Inch - 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G118)
$10.59

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S58474)
$267.39

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$22.48

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002)
$110.33

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$110.33

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001)
$124.13

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: 100014A, 30-3040003 (Part No: FW60166)
$56.77

Stop Body - Fits various tractors models with power adjust rims. Replaces part numbers: 100093A and T19271. (Part No: C0NN1057A)
$15.24

Tire and Tube - This 4.00 inch x 12 inch 3 rib tire comes with a tube and fit various tractor models. (Part No: 400x12-3)
$55.57

Tire Bead Buster - Handy for breaking the bead when removing tires. No electricity, pneumatics or hydraulics needed. (Part No: S.29300)
$429.75

TIRE GAUGE - Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$11.79

TIRE GAUGE DIAL - Precision Bourdon Tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$13.07

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)
$40.14

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 500X15TB)
$19.04

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 550X16)
$95.15

Tire, Three Rib - Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 650X16)
$89.70

Tire, Three Rib - Front Tire, 3 Rib, 5.00 inches x 15 inches. Designed to be used with tube (part number 500X15TB). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 500X15)
$51.77

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: WHS050)
$17.58

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: WHS060)
$42.21

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: WHS059)
$51.89

Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: WHS058)
$44.71

Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: WHS061)
$60.00

Tire Tube 32 Inch - This tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: WHS062)
$48.74

Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Part No: WHS064)
$53.48

CategoriesAll 1550 Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Oliver 1550 Manuals
1550 I&T Aftermarket Shop Manual 136 Pages (Part No: O-202) $32.95

1550 Service Manual 372 Pages (Part No: OL-S-1550,1555) $57.95

1550 Industrial Backhoe Attachment ONLY - Service Manual 50 Pages (Part No: WH-S-BKH 2-62+) $20.95

1550 Industrial Backhoe Only Parts Manual 48 Pages (Part No: WH-P-BKH 2-62+) $20.95

1550 Parts Manual 608 Pages (Part No: OL-P-1550,1555) $90.95

1550 Operators Manual 98 Pages (Part No: OL-O-1550) $29.95

Miscellaneous Related Items
Tune-up DVD
Oliver and Cockshutt - Gas Models - Covers gas versions of Oliver and Cockshutt 1550, 1555, 1600, 1650, 1655, Oliver 77, Super 77, 88, Super 88, 770, 880, 1750, 1755, 1800, 1850 & 1855. Shows how to fine tune your tractor to make it run like it should. The carburetor, distributor, oil and filter change, brake replacement or adjustment, fluid levels and more are discussed in this video. 54 minutes. (Part No: JDV-03050)
$24.00

Rebuild DVD
Oliver and Cockshutt - Gas Models - Covers gas versions of Oliver and Cockshutt 1550, 1555, 1600, 1650, 1655, Oliver 77, Super 77, 88, Super 88, 770, 880, 1750, 1755, 1800, 1850 & 1855. You'll see the engine disassembled down to the bare block and then rebuilt to increase horsepower over factory rating. The many tips and techniques will be helpful to anyone interested in stock tractork pulling or just rebuilding your farm tractor. 70 minutes. (Part No: JDV-02950)
$24.00

Hat
Vintage Oliver solid green hat - The old split-shield style logo on a solid green hat. (Part No: VOSG)
$13.95

New Oliver solid green hat - The newer style Keystone logo on a solid green hat. (Part No: NOSG)
$13.95

Hart Parr solid green hat - 6 panel hat with brass size-adjuster, Hart Parr shield logo sewn on for durability. (Part No: HPSG)
$13.95

Vintage Oliver green mesh hat - 6 panel low profile, plastic snap size-adjuster. (Part No: VOGM)
$13.95

Keystone Oliver green mesh hat - 6 panel low profile, 65% cotton, 35% polyester with 100% nylon mesh back. (Part No: NOGM)
$13.95

Hart Parr solid green mesh hat - plastic-snap size adjuster, 6 panel hat. (Part No: HPGM)
$13.95

Keystone Oliver solid black hat - 65% polyester, 35% cotton, 6 panel, low profile. (Part No: NOSB)
$13.95

Vintage Oliver solid black hat - Vintage Oliver logo sewn onto a solid black hat, 6 panel low profile hat. (Part No: VOSB)
$13.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Categories]   [All Oliver Models]   [Print]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy