FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 50E Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Brakes

Brake Master Cylinder - For tractor models (235 German only serial number Z173013), (255 German only), (260 from 2/1980 and up), (265 serial number 193552 and up), 270, (275 serial number 221522 and up), (290 serial number 387020 and up), (298 German only), (30E Power Shuttle), 40E, 50E. Use DOT 3 or 4 brake fluid or a vegetable based brake fluid. Do not use a mineral based fluid. Replaces 1698670M91, 1698670M1 (Item #: 113743, Ref: 1698670M1) $105.97

Brake Rod Seal - Brake Rod Seal MASSEY FERGUSON: seal, for brake pull rod, wet disc brakes. Fits into left and right lever brackets. Tractors: MF154-4S, MF174-4S, MF194-4, MF194-4F, MF245, MF250, MF253, MF254-4, MF255, MF265, MF270, MF274-4, MF275, MF282, MF283, MF285, MF290, MF294-4, MF298, MF670, MF690, MF698, MF699, MF1085. Industrials: 30D, 30E, 40E, 50D, 50E. Replaces 1667175M1. 1860959M1 (Item #: 105644, Ref: C5NN2N336A) $3.50

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $2.30

Handbrake Assembly - For UK built models with drum brakes. Handbrake Assembly. Replaces 898792M91, 898652M94, 898654M92, 899044M95, 345718X1, 353754X1, 354039X1, 898639M96, 898653M91, 892266M1, 892267M1, 892268M1, 892269M1, 898639M91, 898639M94 (Item #: 180568, Ref: 898639M96) $85.00

Intermediate Brake Disc - This Intermediate Brake Disc has a 8.976 inch outside diameter and a 4.960 inch inside diameter. Replaces OEM numbers K963647, K945755, 37H8180, 1860965M1, 1860965M2, 3613538M2, 15454600, 154.5460.0, 395.34.0112m 411040, 30359700 (Item #: 126977, Ref: 1860965M2) $16.00

Spring - Spring, actuator disc return for disc brakes on tractors, just over 1 inch long: MF154-4, MF184-4, MF235 orchard, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, to serial number V39466, MF375 to serial number V39466, MF383 to serial number V39466, MF390 to serial number V39466, MF398 to serial number V39466, MF399 to serial number V39466, MF670, MF690, MF698, MF699 Industrials: 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 50F Forklift: 4500, 6500. For the following tractors with cast iron axle: MF135, MF165, MF175, MF180 Industrials: 30, 31, 40, 50A. For 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50F, 6500, MF135, MF154-4, MF165, MF175, MF180, MF184-4, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, and more. Replaces 1853148M1. (Item #: 124547, Ref: C5NN2N320A) $1.80

Clutch

Carrier - Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Item #: 112309, Ref: 886727M4) $14.50

Clutch Cover Release Lever Pin - Pivot pin, for clutch cover release lever to cover on tractors: MF240, MF250, MF253, MF270, MF275, MF282, MF283 except Brazil, MF290, MF298, MF383, MF390, MF398, MF399, MF690, MF698, MF699 industrials: 20D, 30E, 35, 50E. Also used as an alternate on clutch covers manufactured in the United Kingdom for the following tractors: MF35, MF50, MF65 industrial: 20. For 20, 20D, 30E, 35, 50E, MF240, MF250, MF253, MF270, MF275, MF282, MF283, MF290, MF298, MF35, MF383, MF390, MF398, MF3989, MF399, MF50, MF65, MF690, MF698, MF699. Price shown is for each, sold only in multiples of 3 items. (Item #: 183795, Ref: 891826M1) $6.60

Clutch Fork Shaft, LH - This Clutch Fork Shaft is the left (long) side. It measures 1 inch in diameter by 5-17/32 inches long. It is used with: 184592M1 bushing, 886719M1 fork and 180449M1 RH shaft (each sold separately). Replaces 180444M1, 180444M2, 1679460M1 (Item #: 166103, Ref: 180444M1) $14.60

Clutch Release Bearing Carrier Spring - This Clutch Release Bearing Carrier Spring is used on many Massey Ferguson models. It is 2-1/8 Inch Overall Length. It replaces 1867690M1, 193334M1, 509230M2, 180451M1, 509230M2, 180451M2, 1867690M2. (Item #: 128535, Ref: 1867690M2) $4.30

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.10

Clutch Release Fork - For tractor models 1200, 135, 135UK, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250 Brazilian, 253, 255, 261, 265, 270, 275, 282, 283 Brazilian, 290, 292 Brazilian, 297 Brazilian, 298, 299 Brazilian, 30B, 30D, 30E, 30H, 35, 35X, 375E Brazilian, 390E Brazilian, 40B, 40E, 415 Brazilian, 425 Brazilian, 435 Brazilian, 440 Brazilian, 445 Brazilian, 460 Brazilian, 465 Brazilian, 475 Brazilian, 481 Brazilian, 492 Brazilian, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65. Replaces 886719M1, 184628M1 (Item #: 179512, Ref: 886719M1) $58.00

Clutch Release Shaft - For tractor models 1200, 135, 135UK, 148, 165, 168, 175, 178, 178UK, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 290, 298, 30B, 30D, 30E, 30H, 35, 35X, 375E, 390E, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65, TO35, MH50. This Shaft is 1 inch diameter X 3 19/32 inches long. (Item #: 165437, Ref: 180449M1) $8.30

Clutch Release Shaft - For tractor models FE35, TO35, 165, 180, 20F, 240, 250, 270, 275 UK, 290 UK, 35, 40E, 50, 50E, 65. This shaft is 1 inch diameter x 5 17/32 inches long. Also replaces 1679460M1. (Item #: 166103, Ref: 180444M2) $14.60

Friction Plate - Friction Disc, 5-1/4 inch outside diameter, 45 Internal Splines. For Hydraulic Shuttle/Instant Reverse Clutch, Industrial Tractors: 30, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E, 204, 205, 304. Replaces 1754345M1. For 204, 205, 304, 30B, 30E, 30, 40B, 40, 50A, 50C, 50D, 50E, 50. Replaces AR39128, 1754345M1, 1754345M2, 1804831M1, 2757328M1, 2757328V1. (Item #: 118132, Ref: 2757328M1) $10.70

Friction Plate - Friction Plate, 5-7/16 inch outside diameter, 50 External Splines. For Hydraulic Shuttle/Instant Reverse Clutch, Industrial Tractors: 30, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E, 204, 205, 304. For 204, 205, 30, 304, 30B, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E. (Item #: 155467, Ref: 1754344M1) $10.80

Lever - Clutch release lever, for split torque single clutch or dual clutch. For tractor models MF231, MF240, MF250, MF253, MF270, MF275, MF282, MF283 except Brazil, MF290, MF298, MF383, MF390, MF398, MF399, MF670, MF690, MF698, MF699 industrials: 20D, 30E, 40E, 50E. Replaces 1810817M91. (Item #: 178543, Ref: 887898M1) $6.20

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 375, 382, 390, 390T, 398, 399, 40, 40B, 40D, 40E, MH44, 50, MH50, 500, 50A, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 675, 690, 698, 698T, 699, 85, 88, F40, FE35, Super 90, TE20. Replaces OEM part number 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate Assembly Split Torque - Used on some of the following Massey Ferguson models: 165 UK, 175 UK, 265S, 270, 275, 285S, 290, 350 Indust/Const, 355, 360, 375, 390, 40E Indust/Const, 50E Indust/Const, 690. A split torque pressure plate has splines in the center, but no free moving captive disc. This is a 12 inch pressure plate with 25 spline, 1 5/8 inch center hub. Replaces 1867436M91, 1867436M92, 3599 496M91, 3599496M91, 3599496M93, 3599496M92, 1300011410, 130 0011 410 (Item #: 169865, Ref: 1867436M91) $389.00

PTO Clutch Plate - Clutch Plate, external teeth, for independent PTO, 7 required. For tractors: MF240, MF265, serial number 9A349239 and up 2-speed only, MF270, MF275 serial number 9A349239 and up 2-speed only, MF290, MF298, MF360, MF375, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699 Industrials: 30E, 40E, 50E. For 50E, MF231, MF270, MF283, MF290, MF298, MF4800, MF4840, MF4880, MF4900, MF670, MF690, MF698, MF699. (Item #: 114030, Ref: 1870860M1) $5.20

Release Bearing - Release Bearing for Single and Dual Clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 350, 352, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 40, 40B, 40D, 40E, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 690, 698, 698T, 699, F40, TO35. Replaces original part numbers 195508M1, 892862M1, 892862M2 and 256179M1. (Item #: 112189, Ref: N1585) $23.20

Trans. Disc, 12 - Organic, rigid disc. Replaces 887889M94, 1.125 inch spline diameter, 10 spline. For tractor models 133, 135, 140, 148, 152, 155, 157, 158, 165, 168, 175, 177, 178, 188, 20, 20B, 20D, 20E, 20F, 20H, 230, 235, 240, 245, 250, 253, 255, 260, 265, 270, 275, 282, 283, 285, 290, 30, 30D, 30E, 30H, 40, 40B, 500, 50E, 550, 560, 575, 590, 670, 690. (Item #: 159009, Ref: 3599462M92) $60.00

Cooling System

Fan Blade - Six blade fan for 135, 150, 165, 230, 235, 245, 270, 283, 290, 298, 670, 690, 698, 50E, 174-45, 274-4, 294-4, Ind 20, 20C, 30, 30B, 30D, 40. Replaces 1874995M92, 3538983M91, 773010M1. 6 Blade Fan Blade, 16 Inch, 1 5/8 inch pilot hole and 1 3/4 inch square bolt pattern. (Item #: 123105, Ref: 3538983M91) $36.40

Radiator - Radiator. For MF tractors: (270, 290, 275, 283, 50E, all UK models), 670. Core size: 15.125 inches wide, 18.875 inches high, 4 rows of tubes, 7 fins per inch. This radiator uses cap part number 1874455M93. Replaces 3820620M91, 1669650M94, 1683977M92, 00114060U91 00114155U91, 0015926U91, 0016300U91. (Item #: 160209, Ref: 1669650M94) $202.00

Radiator Cap - This Radiator Cap is used on Massey Ferguson Models: 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 270, 275, 283, 285, 290, 298, 30D, 30E, 375E Brazilian, 390E Brazilian, 50E, 50EX, 550, 560, 565, 575, 590. It Replaces 1874445V93, 1874445M94, 1874455M93, 1874445M93, 1874445M93 (Item #: 165450, Ref: 1874455M93) $10.20

Thermostat Body Cap - For tractor models 165, 175, 180, 24, 25, 255, 265, 270, 275, 283, 285, 290, 30, 31, 50C, 50D, 50E, 50H, 60H, 6500, 6500H, 6800H. Replaces 37735651. (Item #: 173130, Ref: 735312M1) $42.10

Thermostat Housing Gasket - Used on Perkins 212, 236 and 248 engines. Massey Ferguson models 165, 168, 174, 175, 178, 184, 185, 186, 187, 188, 194, 240, 255, 261, 265, 270, 273, 274, 274SK, 275, 283, 284, 285, 290, 293, 294, 30, 307, 30D, 31, 365, 373, 374, 375, 375E, 377, 383, 384, 387, 390E, 393, 394, 397, 425, 435, 440, 445, 487, 50, 506, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 99 (Item #: 112237, Ref: 36862151) $4.30

Water Pump - This New Water Pump comes gasket. It is used on some tractors and industrials with Perkins Engines: A4.212 (LA), A4.236 (LD), A4.248 (LF), T4.236 (LJ). Replaces 3641153M91, 3641361M91, 3638979M91, 3638980M91, 3640268M1, 2431154, 41312736, 4131A014, 4131A018, 41313228, 4222071V91, 41313204, 41313212, 4222071M91, U5MW0106, 41312736, 41313204, 41313228, 4131A035, 141313228, 4131A031 3771F01A1. (Item #: 180451, Ref: 4222071M91) $98.00

Water Pump Repair Kit - Repairs, 3637411M91, 743065M91 water pumps. Replaces, 739013M91, 740212M91, 741964M91. For tractor models 165, 168, 174-4S, 175, 184-4S, 185, 188, 194-4F, 240, 265, 274, 274S, 274SK, 275, 284-4S, 285, 290, 294S-4S, 362, 373, 377, 383, 387, 393, 397, 440, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 675, 690. All the above with A4.212, A4.236 or A4.248 engines. (Item #: 173260, Ref: 3637482M91) $47.30

Water Pump with Pulley - For tractor models 135 UK, 150, 203, 205, 35, 50, FE35. Water Pump with single pulley and gasket. 2.5 inch diameter hub. Replaces Perkins 41312154. Includes pulley part number 731280M1 2.5 diameter hub. The fan mounting bolt holes are not in a square pattern. For Perkins A3.152 Diesel. Replaces 731280M1, 747542M91, 829258M1. (Item #: 122905, Ref: 734932M91) $55.00

Water Pump - With Pulley - With 1/2 inch diameter shaft. For A4-236 diesel and A4-248 diesel in tractors: 175, 180, MF255, MF265, MF270, MF275, and other with Perkins A4.212 (LA), A4.236 (LD), A4.248 (LF), T4.236 (LJ) Engines. Replaces 743064M91, 3637411M91, U5MW0104, 3641832M91, 3640565M91, 3641219M91, 3637411M91, 4131A029, 41312566, 41312568, 41312489, 41312567, 4131A021, 4131A013, 41312756, 41312743, 41312161, 41312323, 41312366, 41312733, 41312554, 41312551, 41312561, 41312564, 41313232, 41313225. (Item #: 157623, Ref: 3641219M91) $59.00

Water Temperature Gauge - For instrument panel on tractors: MF231, MF240, MF250, MF253, MF270, MF282, MF283 except Brazil, MF290, MF298, MF2775 to serial number 9R2805 to serial number 9R0726 Industrials: 20D, 30E, 40E, 50E, 50F. For 20D, 30E, 40E, 50E, 50F, MF231, MF240, MF250, MF253, MF270, MF2775, MF2805, MF282, MF283, MF290, MF298. (Item #: 104117, Ref: 1877719M92) $21.80

Decals and Emblems

Hood Emblem - For 20D, 20E, 20F, 240, 250, 270, 275, 283, 283 UK, 290, 290 UK, 298, 30E, 30H, 40E, 50E, 50F, 50H, 670, 690, 698, 699. Hood Emblem. (Item #: 104146, Ref: 1682944M1) $8.60

Drive Train

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $24.20

Bearing, Mainshaft - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 serial nubmer up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Item #: 173116, Ref: 338552X1) $44.80

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $9.60

Bearing, Outer Input Housing - 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Item #: 165439, Ref: 886668M1) $12.00

Carrier Assembly - For Epicyclic Pinion Gear. Models: 135, 150, (155, 158, 165 with Multi Power), 175, 20, 202, 203, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, (265, 275, 285, 290 with Multi Power), 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 35 serial number 365360->, 360, 362, 375, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, (550, 565, 575, 590 with Multi Power), 65, 6500, 765 serial number 609714->, FE135 Coventry. (Item #: 161568, Ref: 897711M93) $347.01

Countershaft - 8 speed transmission, 17/20 spline, 15 tooth, 12.250 inches long. For tractor models 1085, 135, 150, 1505, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 165986, Ref: 906472M2) $54.00

Coupling, Rear Drive Shaft - 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Item #: 160154, Ref: 1680189M1) $36.20

Crown Wheel and Pinion Set - Ring has 38 teeth, shaft has 11 teeth, 10 spline. Approximately 9 7/8 inch- 9 15/16 inch total length. For tractor models 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 200 Series, 20E, 20F, 2200, 235, 24, 240 serial number N01001-A20286, 245, 25, 250, 2500, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275 UK, 281, 282, 285S, 290 UK, 30, 302, 304, 30E, 30H, 31, 3165, 360, 362, 365, 375, 390, 399, 40, 40E, 4500, 50, 50E, 50H, 50HX, 60H, 65, 6500, 670, 6800H. (Item #: 125330, Ref: 1664255M92) $332.00

Differential Bearing and Cup - Bearing and cup set Fits multiple Massey Ferguson Models. (159x108x21mm) Replaces 1850849M91, 1850909M91, 185251M1, 185252M1, 185252V1, 3039248M1, 3039249M1 (Item #: 150360, Ref: 185251M1) $146.00

Differential Coupling Cap - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 6500H, 670, 6800H, 690, 698, 699, Super 90. (Item #: 172335, Ref: 898712M2) $86.00

Differential Cover - For tractor models 135, 150, 165, 175, 180, 20E, 20F, 2200, 235, 245, 250, 2500, 253, 255, 265, 272, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 670, 690. Replaces 894781M3, 894780M92. (Item #: 173126, Ref: 3759150M1) $199.00

Differential Cross - sed with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson 894302M1, 6211999M1, 894302M2, 2746135M1, 2746135M2, 181276M1, 588731M1 (Item #: 113612, Ref: 894302M3) $14.00

Differential Gear - The dimensions of this gear in inches are: A - 1 15/16, B - 4 1/2, C - 2 3/4, D - 15/16. It has 14 Teeth, and 39 Splines. Verify measurements before ordering. Used on Massey Ferguson models: 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160 Replaces 885517M1, 885518M1, 885518M4, 885518M2, 885518M5 (Item #: 166930, Ref: 885518M1) $56.00

Differential Lock Fork - For tractor models 1080, 135, 165, 175, 180, 20F, 220, 235, 24, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 320, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 173511, Ref: 906807M1) $66.00

Differential Lock Fork Coupler - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 172334, Ref: 897003M3) $81.00

Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 3.32 inch diameter. For tractor models 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160. Replaces 2746322M1, 897725M1 (Item #: 166937, Ref: 2746322M1) $24.70

Differential Pinion Gear Thrust Washer - Used with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson part numbers 181277M1, 514958M1, 885520M1, 3387281V1, 3387281M1 (Item #: 166940, Ref: 3387281M1) $1.30

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $8.40

Differential Plate, Left Hand - Replacing Massey Ferguson part numbers 1860885M1, 1687864M3, 1687864M1, 1860865M1, this plate is used on the left side of the differential. Used on Massey Ferguson models: 1080, 1085, 165, 168, 185, 188, 245, 255, 265, 270, 275, 282, 285 (FR), 290, 290 Brazilian, 298, 30B, 30D, 30E, 30H, 375E Brazilian, 390E Brazilian, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 60HX, 670, 675, 690, 698, 699 (Item #: 173284, Ref: 1687864M1) $123.00

Differential Plate, Right Hand - For tractors with Wet Brakes, this differential plate is used on Massey Ferguson models: 4500, 6500, 24, 25, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 60HT, 1085, 245, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 50, 670, 690, 698, 699. Uses gasket 183254M1 and O-Ring 1860838M1. Replaces Massey Ferguson part number 1860882M1 (Item #: 173173, Ref: 1860882M1) $145.00

Dipstick, Differential Oil Level - Verify length of 6 1/8 inches. For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30b, 30D, 30E, 360, 362, 375, 383, 390, 390T, 393, 398, 40, 40B, 40E, 50C, 50D, 50E, FE135 Coventry. Replaces 1665962M91, 1665962V91, 828810M91 (Item #: 163463, Ref: 1665962M91) $5.10

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.20

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $2.50

Gear, Reduction - 21 teeth, 39 spline. For tractor models 135, 150, 165, 175, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 6500, 6500H, 670, 6800H, 690. (Item #: 172350, Ref: 897005M1) $114.00

No
Picture
Gear Shift Knob - Round ball, 3/8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35. (Item #: 150683, Ref: 180006M91) $3.90

Gearshift, Retainer Lock - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 172683, Ref: 1860761M1) $25.00

Gearshift Selector - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E, 50H. (Item #: 173128, Ref: 1862868M2) $36.80

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Gearshift Stop Plate - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 173117, Ref: 1860764M3) $4.50

Inner Axle Bearing - This Bearing measures 66.7mm (2.626 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces 3955/394A, C9NN4874A, 1-31-741-001, 106639, 8181397, 163044, 81818397, 81826019181, 82958861, C5NN4874B, C5NN4N221B, 86503131, 81818406, 82007077, 1079649M1, 884791M92, 831488M1, 834049M1, 1079403M1, 1851392M91, 1851392M1. Verify OEM number or measurements before ordered. Many model tractors have more than one rear axle configuration. (Item #: 185648, Ref: C9NN4874A) $36.50

Inner Axle Bearing - Measuring 1.024 inch inner width, 3.244 inch inside diameter, 4.941 inch outside diameter, this bearing is used on Massey Ferguson 1080, 1085, 135, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 265, 270, 275, 282, 283, 285, 290, 292, 295, 296, 297, 298, 299, 30, 30B, 30D, 30E, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 410, 420, 440, 445, 460, 465, 475, 492, 50, 50A, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 670, 675, 690, 698, 698T, 699. Verify measurements or OEM number. Many of the listed models have more than one rear axle configuration. Replace Massey Ferguson part numbers 1881931V91, 1881931M91, 894776M1, 588237M1, 27687, 27620 (Item #: 173235, Ref: 1881931M91) $59.00

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $13.20

Instant Reverse Transmission Pump - For tractor models 204, 205, 303, 30, 30B, 30D, 30E, 40, 40B, 50, 50A, 50C, 50D, 50E, 50F, 60, 2200, 2500, 4500. Replaces 1034964M91, 1754316M91, 530718M91, 530718M92. (Item #: 170901, Ref: 86516596) $300.00

Mainshaft, Heavy Duty, 8 Speed Trans. - 22 tooth, 18 spline, 13.375 inches long. Replaces 1870151M1, 1682448M1. For tractor models 1080, 1085, 135, 148, 155, 158, 165, 168, 175, 180, 185, 188, 240, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 50E, 50H, 550, 565, 575, 590. Replaces 1682448M1, 1870151M1. (Item #: 125331, Ref: 1687642M1) $98.00

Outer Cover Seal - Measuring 4.00 inches outside diameter x 2.875 inches inside diameter, 0.375 inches wide, this is the outer seal on cover. Replaces 894736M4, 834220M1, 894763M5, 894763M2, 894763M3, 894763M4, 3699800M1, 3699800M2, 73119909, 70657582, 0657582, 657582, 6V8172, 2X5156, 8T6917, 1B4327, 1D4327, 304816C91, 290811R92, 71855C1, 270380C91, 643986C91, B132704AB (Item #: 172312, Ref: 834220M1) $17.30

Pinion Epicyclic Gear - Replacing Massey Ferguson part numbers 894769M1, 894769V1, 897769M1, 184176M1, this Planetary Gear has 12 Teeth. It is used on tractors models: 135, 145, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 261, 265, 270, 275, 282, 283, 290, 30, 30B, 30D, 30E, 30H, 31, 3165, 375E, 390E, 40, 40B, 40E, 410, 420, 425, 430, 435, 440, 481, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 60, 60H, 65, 670, 675, 690, 765 (Item #: 170397, Ref: 897769M1) $48.80

Pinion Jam Nut, New Style - Used on Massey Ferguson models: 1004, 1004T, 1200, 1250, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US Built, 240, 245, 250, 253, 255, 260, 261, 265, 27, 275, 282, 282 US Built, 283, 285 (FR), 290, 290 US Built, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. This new style nut replaces 532956M1, 3596252M1 (Item #: 173348, Ref: 532956M1) $10.90

Planetary Pinion Gear, (Epicyclic) - 12 tooth. For tractor models 135, 150, 165, 175, 178, 180, 203, 205, 20E, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 3165, 356, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50H, 5650, 60, 60H, 65, 6500, 6500H, 670, 6800, 690, 85, 88. (Item #: 170397, Ref: 894769M1) $48.80

Planetary Pinion Gear Shaft - The end of this shaft is threaded with a through hole for a Roll Pin. It measures 1.03 inches in diameter and is 3.26 inches long. Replaces Massey Ferguson part number 1864869M1. Used on Massey Ferguson models: 2500, 4500, 6500, 20E, 20F, 2200, 24, 25, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E. 50F, 50H, 60, 60H, 6500H, 6800H, 135, 150, 165, 165UK, 175, 175UK, 178, 180, 235, 240, 245, 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275UK, 281, 282, 283, 290, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 670, 690 (Item #: 170392, Ref: 1864869M1) $22.70

Planetary Ring Gear - 45 teeth. For tractor models 135, 150, 165, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30A, 30B, 30D, 30E, 30H, 31, 3165, 40, 40B, 40E, 4500, 50, 50C, 50D, 50E, 50H, 60, 60H, 6500, 670, 690. (Item #: 172320, Ref: 894772M2) $387.00

Planetary Ring Gear Gasket - Two of these gaskets are used per planetary ring gear. Replaces Massey Ferguson part numbers 184182M3, 191141M1 (Item #: 128513, Ref: 191141M1) $7.80

Planetary Ring Gear Thrust Washer - Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref: 1866542M1) $3.60

Pump to IPTO Clutch Shaft - Used on tractors with Independent PTO, this part replaces Massey Ferguson part number 1868539M1. Used on 1200, 1250, 148, 152, 158, 168, 188, 20E, 240, 250, 253, 265, 275, 285, 290, 298, 375E Brazilian, 390E Brazilian, 40E, 50E, 50EX, 50H, 50HX, 550, 565, 575, 590, 60H, 60HX, 698, 699. (Item #: 182625, Ref: 1868539M1) $126.00

Rear Axle Housing Carrier Plate O-Ring - Measuring 317.5mm inside diameter by 2.62mm thick, this o-ring is used on Massey Ferguson 1085, 1200, 1250, 135, 152, 155, 158, 165, 168, 175, 180, 185, 188, 20C, 20D, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 415, 425, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. Replaces OEM numbers 1860838M1, 1860838V1, 1860838M2 (Item #: 173237, Ref: 1860838M1) $4.80

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $22.40

Seal, PTO Pinion Shaft Retainer - This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Item #: 128472, Ref: 1860867M3) $5.70

Shift Fork, 8 Speed - For tractor models 1080, 1085, 11, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $28.70

Shift Fork, 8 Speed - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20E, 20R, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H. Shift Fork replaces 1862139M1. For 8 Speed. (Item #: 168885, Ref: 1860773M1) $53.00

Shift Lever - Used on Massey Ferguson models 265, 270, 275, 282, 283, 285, 290, 298, 375E, 390E, 50E, this part replaces OEM numbers 1673892M3, 1673897M1, 1873274M2, 368233X, 1873274M1. This leaver is for 1-2-3-4-Reverse. (Item #: 151014, Ref: 1873274M2) $45.90

Shift Rail, 3rd - Replaces 1678865M1. For tractor models 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 31, 40, 40B, 50C, 50H, 50E. (Item #: 182886, Ref: 1678864M1) $43.90

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $1.00

Transmission Pump Seal - This Transmission Pump Seal is used on 2200, 30, 40, 50, 30B, 40B, 50A, 50C, 30D, 30E, 40E, 50D, 50E, 60, 2500, 4500 FORKLIFT, 6500 Replaces 884422M1 (Item #: 179609, Ref: D8NN7N089AA) $16.30

Transmission Pump Seal - This O-Ring is used for mounting Transmission Pump. Replaces 1754392M1, 1754392V1, 1754392M1, 81816228, 1P77836A (Item #: 179708, Ref: 81816228) $5.90

Transmission Rear Axle Gasket - This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $7.80

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.00

Electrical System

Alternator - 12 volt, 55 amp. For tractor models (50E, 50H 1993 on), (184 19886-89 with 236 diesel and left hand mounting alt.), (273 1985 to 1986 with 236 diesel), (274 1982 to 1986 with 236 diesel), (283 1985 to 1999 with 248 diesel), (284 1985 to 1997), (294 1982 to 1986 with 358 diesel). Replaces 24145. (Item #: 113604, Ref: ALU0014) $122.00

Ignition Switch - Switch, starter and heat, 6 prongs, includes 2 keys. For tractor models 231, 240, 250, 282, 290, 360, 362, 383, (390T serial number up to B18009), 393, 3505, 3525, 20F, 30E, 30H, 40E, 50E, 50F, 50H, 50HX, 60H. Replaces 1446116M1, 1446116M91, 1874120M91, 1874120M93, 1874535M3, 1874535V3, 3387319M1, 34228, 3533928M91, 3536550M92, 3536550M93, 35670.1874120M91 (Item #: 111509, Ref: 3107556R92) $9.90

Neutral Safety Switch - This Neutral Safety Switch has blade type terminals. For tractors: MF240*, MF250*, MF253, MF282, MF283 except Brazil, MF298*, MF360, MF362, MF375, MF383, MF390, MF393, MF398, MF399 industrial: 40E*. *Optional with 3381094M1. Replaces 888501M2, 963417M2, 1012043M91, 1679 223M2, 1679223M1, 1679223M2, 3381094M1, 34198, 39121, 39855, 963417M2, SMB497. (Item #: 164579, Ref: 1679223M2) $22.00

Oil Press Switch - Oil Pressure Switch. For tractors: MF154S, MF174S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF270, MF274-4, MF282, MF283 except Brazil, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF3050 to serial number V173002, MF 3060 to serial number V173002, MF 3070 to serial number V173002, MF 3090 to serial number V173002, MF3505, MF3525, MF3545, MF3630, MF3650 Industrials: 20D, 30E, 40E, 50E. Replaces 1423895M91, 1877721M92. For 750, 760, 850, 860. (Item #: 151010, Ref: 3599307M91) $8.30

Starter - New Lucas style starter assembly with solenoid. For tractors: MF174-4S, MF184-4, MF194-4F, MF270, MF274-4, 282, 283 except Brazil, MF290, MF292-4, MF298, MF362, MF375, MF383, MF390, MF390T, MF393, MF398, MF399, MF670, MF690, MF698, MF699, MF3050, MF3060. Replaces Lucas LRS232, LRS215, 26404R, 27464, 27539R, NSB529, 26271R, 26413R, 26410, 27539, NSB540, LRS00232, LRS519, 26404, 26413, 26271, 27572, 27572B, S5027, NSB531. Replaces Massey Ferguson 1868285R3, 1868285M3, 1868285M91, 1860093M2, 1691806R1, 1691806M1, 1447731M1, 3597372M1, 3597372M2, 3597372R2, 3763362M92, 3930509R1, 3930506E1, 3930506E1ATG, 3930506R1, 4226701M91, 4224340M91, 3519400M92, 1680064M1, 3763362M91, 1868287T, 1868285M2, 2873B057, 2873B072 (Item #: 112303, Ref: 3763362M91) $165.00

Starter, 12 Volt - For use in temperate climates. For tractor models (TEF20 with 20C Diesel Engine), (FE35, TO35 with 23C Diesel Engine). Also used in some industrial 20C, 50B, 50D, 50E, 50F, 50H, 50HX Replaces 0001362060, 0001362084, 0001367011, 0001362309, 0001362072, 26278, LRS216, LRS157, 27423, 27413, 27463, 26173, 26167, 26133, 26143, 193192M91, 184907M91 (Item #: 113693, Ref: S.60360) $150.00

Starter, LH Mount - Left Hand Mount. Order 3763363M91 if you have a Right Hand Mount. Has 3.5 Inch center-to-center bolt pattern. Replaces; 3597371M2, 1868283M3, 1868283M5, 1691805M1, 1691805M2, 3027466M1, 3609526M91, 1680065M1, 1680068M1, 3763363M92. Replaces Lucas: 26274, 26274A, 26274A/D, 26274D, 26274E, 26274E/F, 26274H, 26274H/N, 26295, 26295A, 26295A/B, 26295B, 26295D, 26295D/E, 26295E, 26295F/M, 26320, 26320A/B, 26320D, 26323, 26323A, 26345, 26345A/B, 26345D/J, 26366, 26366A/F, 26410, 26410A, 26410A/B, 26410B, 26414, 26414A/E, 26414E, 26925193A, 26925193D, 27515, 27515A, 27515A/E, 27515E, 27523, 27529, 27539A, 27539B, 27539C, 27539D, 27539E, 27572, 27572B, 27572D, 27578, 27578A, 27578B, 27578D, 27583, 27583A, 27583B, 27583D, 27583H, 27583J, 27599A, NSB531, NSB540, 26404, 26404A, 27536 (Item #: 112303) $165.00

Starter, Temperate Climate - Lucas Type for Perkins A4.212, A4.236 and A4.248 Diesel Engines. For MF 165, 175, 185, 265, 275, 290, 298, 362, 365, 375, 390, 390T, 396, 398, 399, 675, 690, 698, 699, 3050, 3060, 3065, 3070, 3075, Ind. 50, 50D, 50E, 50F, 60H. Replaces 1860093M2, 1680064M1. (Item #: 112303, Ref: S.41143) $165.00

Switch, Lamp and Horn - Lucas type. Used on 135, 148, 165, 168, 175, 178, 185, 188, 230, 235, 240, 245, 250, 255, 265, 275, 290, 298, 35, 35 Gas / 35 Petrol, 35X, 375E Brazilian, 390E Brazilian, 50, 50E, 50EX, 565, 575, 590, 65, 765. Replaces 882283M1, 54033364, 34952 (Item #: 124742, Ref: 1502378C1) $17.50

Switch With Keys - Switch, starter and heat, 6 prongs, includes 2 keys. For tractors: MF231, MF240, MF250, MF253, MF270, MF282, MF290, MF298, MF360, MF375, MF383, MF390, MF398, MF3050, MF3060, MF3070, MF3090, MF3505, MF3525, MF3545, MF3630, MF3650, MF3680 industrials: 20D 1874535M3 (Item #: 111509, Ref: 3107556R92) $9.90

Engine Bearings

No
Picture
Rod Bearing Set, .030 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106999, Ref: 85036C) $11.20

No
Picture
Rod Bearing Set, 152 Diesel, .010 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106997, Ref: 85036A) $11.00

No
Picture
Rod Bearing Set, 152 Diesel, .020 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106998, Ref: 85036B) $9.00

No
Picture
Rod Bearing Set, 152 Diesel, Std - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106996, Ref: 85036) $10.10

Engine Gaskets

Gasket Set, Top - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 107250, Ref: 748008M91) $33.30

Seal, Front - FOR AD3.152 Perkins Diesel. Replaces: VPC5102, VPC5103, 02100004, 1446853M1, 1447690M1, 2413F436, 2415361, 7701031630, 810742, 812280. (Item #: 107222, Ref: 2418F436) $10.10

Timing Gear Housing Gasket - This timing gear housing gasket is for tractor models 165, 1745, 175, 180, 194-4, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 3070, 31, 375, 383, 390, 50C, 50D, 50E, 50H, 60, 6500, 670, 6830, 6830C, 6830FC, 690, 7830, 8530F. Replaces 36814127, 36814123. Price shown is for each, sold only in multiples of 2 items. (Item #: 173312, Ref: 742474M1) $15.00

Valve Cover Gasket - This gasket is used on multiple Massey Ferguson models with Perkins 212, 236 and 248 4 cylinder Perkins Diesel Engines. It replaces original part numbers 21826363, 3638461M1, 3638482M1, 36811114, 36811122, 36811126, 36811131, 36811132, 36811133, 3681A011, 3681A026, 3681A027, 4223924M1, 746714M1, 748277M1 (Item #: 128689, Ref: 737225M1) $12.10

Valve Seals - Valve seals for AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces 1447019M1, 33817125, 33817402, 3637041M1, 733820M1, 736840M1, 740009M1. (Item #: 128624, Ref: 33817117) $0.90

Engine Parts

Balancer Assembly - 6 Bolt Mounting. For tractor models 174-4S, 194-4F, 265S, 2675, 270, 271, 274-4, 281, 281X, 281XE, 283, 283 Brazil, 285S, 290, 294-4, 3050, 3060, 362, 365, 374S, 374V, 375, 383, 384S, 390, 394S, 4225, 4233, 4235, 4325, 4335, 481, 50E, 50F, 50H, 670, 690, 8250. Replaces 3637352M91, 3637353M91, 3637353V91, 3638368M91, 4111K051, 4224107M91, 4224110M91, 4225230M91, 4225230V91, 4226792M91, 4111K011, 4111K022, 4111K026, 4111K028, 4111K035, 4111K037, 4111K038, 4111K041, 4111K053, 4111K055, 4111K059, 4111K006, 7C - 9449 (Item #: 119893, Ref: 3637352M91) $561.00

Bolts, Conn Rod - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 160206, Ref: 32762144) $3.20

Camshaft - Camshaft for Perkins Diesel Engines. For A4-236 in tractors: MF174-4S to engine serial number U08336N, 175 engine serial number 236-UA19817 and up, 180 engine serial number 236-UA19817 and up, MF184-4, MF255, MF265, MF270, MF274-4, MF670; Industrials: 31, 50D, 50E. For A4-248 in tractors: MF194-4, MF275, MF290, MF690; Industrial 50C. Replaces Perkins 31415321. (Item #: 173129, Ref: 736818M1) $125.00

Camshaft Gear - 56 tooth. For tractor models 1100, 1130, 1745, 180, 184-4, 220, 255, 2640, 2675, 270, 2705, 274-4, 282, 283, 285, 294-4, 30, 300, 3050, 3060, 3070, 3505, 3525, 3545, 3630, 399, 470, 50C, 50D, 50E, 50H, 60, 6500, 670, 699, 80, 850, 860, (165, 168, 175, 178, 185, 188, 265, 275, 290, 565, 575, 590, 690 all with engine A.212, A4.236 or A4.248). Replaces 31171353. (Item #: 172330, Ref: 736254M1) $94.00

Crank Gear - 28 teeth. Do NOT use on build number: LE70089, LE22376, LE80173. For tractor models 1007, 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194, 194-4F, 255, 265, 274, 274S, 275, 284S-4S, 285, 290, 294S-4S, 3050, 3065, 3070, 30D, 3370, 362, 365, 373, 375, 377, 383, 387, 390, 393, 397, 398, 50, 50B, 50C, 50D, 50E, 565, 575, 590, 6000, 60H, 675, 690, 698, 698T. All with either A4.121, A4.236 or A4.248 Perkins Engines. Replaces 734749M1, 73479M1, 734749M1. (Item #: 165548, Ref: 31171681) $69.00

Crankshaft - This New Crankshaft is used on A4.236, A4.248 Perkins with Lip Type rear seal. Replaces Casting numbers 26042, 31315631, 31315641, 31315664, 31315871, 31315881, 73629M91, 85821, 94433, U5BG0052, ZZ90082, ZZ90122, 31315870, 31315980. If your crankshaft currently has a single bolt hole, you will be receiving a three bolt hole crankshaft (which is the newer design) to convert from the old single bolt hole crank to the new three bolt hole crank you will also need to order 3638115M1 Crankshaft Pulley Retaining Kit. Replaces 3637401V91, 3637402M91, 3637401M91, 3637401R91, 4223939M91, 736829M91, U5BG0024, ZZ90081, 4227066M91. (Item #: 102125, Ref: 3637401M91) $385.00

No
Picture
Crankshaft Kit - This Crankshaft Kit is used on Perkins A4.236 and A4.248 engines with lip rear crankshaft seal 1447049M91 (not included). It contains crankshaft, 735168M91 main bearing set, 736950M91 rod bearings, 733714M1 thrust washers, 3638115M1-thrust block (this three bolt pulley retainer replaces older single bolt style), 3638113M1 bolts. This Crankshaft does not have balancer weights in Web of Shaft. Replaces 31315981, 31315985, 3637401M91, 94433, 94435, 94436, U5BG0019, U5BG0024, U5BG0052, ZZ90081 (Item #: 3637401M91KIT) $558.83

Crankshaft Pulley Retaining Kit - This Crankshaft Pulley Retaining kit is used on 1004.4, 1004.4T, 1004.4TI, 4.41, A4.236 and A4.248 Perkins Engines with 3 bolt crankshafts. Also used with changing from an older style single bolt retainer crank to a three bolt. Includes 3638115M1 Thrust Block, 3638113M1 Bolts. Replaces 3638113M1, 3638115M1, 3271R021, 32186139, 3242T001, 132186139, 3242T001 (Item #: 182751, Ref: 3638115M1) $64.00

Cylinder Head - This cylinder head comes with valves, springs, guides and retainers, installed. Replaces 737772M1, 742803M91, 742805M91, 748400M91, 3637486M91. For tractor models 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194-4S, 240, 265, 274, 274S, 274SK, 275, 284-4S, 284S, 285, 290, 294-4S, 294S, 3050, 3060, 30D, 362, 362N, 365, 372, 373, 375, 377, 382, 382N, 383, 387, 390, 393, 397, 440, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 675, 690. All the above with either A4.212, A4.236, or A4.248 4 cylinder diesel engines. (Item #: 168497, Ref: 3640877M91) $895.00

Flywheel with Ring Gear - This 12 inch Fly Wheel with Ring Gear is used on multiple Massey Fergusons Tractors with 236 or 248 Perkins Engines and 12 Inch Clutches. It replaces original part numbers 41117084, 41112565, 742106M91, 3819666M91. Verify Part Numbers before ordering. For models: 165, 168, 175, 178, 185, 188, 261, 265, 275, 285S 290, 362, 365, 372, 375, 382, 390 with W4.248 with serial number up to B18008, 4225, 4235, 4325, 4335, 550, 565, 575, 590, 675, 690, 265S, 285S, 375E, 390E, 390T, 50E. (Item #: 119280, Ref: 742106M91) $390.00

Gear, Idler - 63 tooth. For tractor models 165, 168, 1745, 175, 178, 180, 184-4, 185, 188, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 31, 50C, 50D, 50E, 50H, 565, 575, 590, 60, 6500, 670, 6830, 6830C, 6830FC, 6860, 6870, 6880, 7830, 7830C, 7860, 7880, 8530F, 8830, 8860, 8870, 8880, (675, 690 early models with engine A4.212 or A4.248 engine), 910. Replaces 41115023. (Item #: 167783, Ref: 734738M91) $100.00

Rocker Arm (LH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces 747690M1, 3737A101, 3737A031, 3737A071, 3638185M1, 0520429, 957E6469 (Item #: 173476, Ref: 41151483) $14.40

Rocker Arm (RH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces original part numbers 3638184M1, 747691M1, 957E6468, 3737A041, 3737A081, 3737A091, 520430, 72080122. (Item #: 173477, Ref: 41151484) $16.80

No
Picture
Valve Guide, Exhaust - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 166888, Ref: 3343J002) $2.70

Valve Guide, Exhaust - These Exhaust Valve Guides are used in Perkins A4.236 Diesel Engine (early block), A4.236 Diesel Engine (late block), A4.248 (liner less Flame Ring), A4.248 (liner with Flame Ring). Replaces original part numbers 31431751, 33261751, 33261752, 33261754, 33261757, 3343J001, 3343J002, 3343J021, 3638922M1, 4223074M1, 748420M1. (Item #: 166888, Ref: 748420M1) $2.70

No
Picture
Valve Guide, Intake - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Price shown is for each, sold only in multiples of 2 items. (Item #: 166582, Ref: 3343F002) $3.10

Valve Tappet - This Valve Tappet (Lifter) is used on Perkins: 1103A-33, 1103A-33T, 1103B-33, 1103B-33T, 1103C-33, 1103C-33T, 1103C-33TA, 1103D-33, 1103D-33TA, 1104A-44, 1104A-44T, 1104A-44TA, 1104C-44, 1104C-44T, 1104C-44TA, 1104C-E44, 1104C-E44T, 1104C-E44TA, 1106C-E60TA, A4.212, A4.236, A4.248, A6.354, AT4.236, AT6.354, T4.236, T6.354. Replaces 291962A1, 1481642, 4222069V1, 31434163, 4222069M1, 4226515M1, 740671M1, 3142U031, 31434163, 30-3181677, 70257402, 257402 (Item #: 165600, Ref: 740671M1) $6.90

Engine Pistons and Sleeves

No
Picture
Piston - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Price is per piston. (Item #: 168957, Ref: 68332) $37.30

No
Picture
Piston and Sleeve Kit - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 167206, Ref: U5MK0034) $72.00

Engine Rings

No
Picture
Piston Rings - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 120667, Ref: 836325M91) $12.90

Exhaust System

Manifold - For tractor models (175, 184-4, 270, 283, 290, 31, 362, 50E, 50H, 60H), 165 with A4.236 Engine, (168, 178, 185, 188 all with Engine Type A4.236/A4.248) 60 Back Hoe, (6500, 6800H all Forklift) (24, 25 all handler) 11 Loader, 220 Skidder. Exhaust Manifold is used with a 90 Degree Elbow. Replaces 37781781, 736206M1. (Item #: 101630, Ref: 733206M1) $35.80

Muffler - New Muffler measures A= 2-1/2 inch inlet length, B= 2-1/8 inch inlet inside diameter, C= 24-3/8 inch shell length, D= 17-1/4 inch outlet length, E= 1-3/4 inch outlet outside diameter, F= 44-3/4 inches overall length. For tractor models 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194-4F, 274, 274S, 274SK, 294S-4S, 40, 50, 50E, 65, 765. (Item #: 102435, Ref: 898228M94) $65.00

No
Picture
Muffler - For Massey Ferguson Construction and industrial models 20F, 30E, 30H (s/n 5109A0048-later), 40E, 50B, 50D, 50E, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 3510453M94, 3510453M91, 3510453M93, 1475790M91, Fitting Diameter: 2.44", Muffler Diameter: 3.74", Muffler Length: 25.98", Overall Length: 52.36", (Item #: 171553) $186.00

Fuel System / Air Intake

Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on Massey Ferguson 230, 231, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 290, 670, 690, 154-4, 174-4S, 184-4S, 194-4F, 20C, 20D, 254-4, 274-4, 294-4, 30B, 30D, 30E, 40B, 50C, 50D, 50E. Replaces original part numbers 1039071M1, 1890147M1, 3638268M1, 3907536M1. (Item #: 112513, Ref: 1039071M1) $5.10

Fuel Cap - This fuel cap may come bare metal or painted red. NOTE: EXTERNAL LOCK TABS. Used on Massey Ferguson 158, 20, 20B, 20D, 20E, 20F, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 60H, 6500H (FORK LIFT), 6800 (FORK LIFT), 1080, 135, 135 UK, 148, 155, 165 UK, 168, 175 UK, 178, 185, 188, 231, 240, 240P, 250, 253, 260, 261, 270, 275 UK, 283, 290, 298, 35, 35X (FE), 50, 550 UK, 560, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699. Replaces 1077576M1, 1666439M91, 1698042M91, 1876534M91, 1876534V91, 3762586M92, 3762586M93, 828583M91, ATJ3092, 001584U91, 1103177 (Item #: 153639, Ref: 1876534M1) $13.60

Fuel Filter - Fuel filter element, external body type. 4-3/8 inch high. For tractors: MF230, 235, 245, 255, 265, 270, 275, 282, 283UK, 283 Brazil, 290, 360, 375, 383, 390, 390T, 398, 670, 690, 2745, 2775, 2805, 3050, 3060, 3070, 3505, 3525, 3545, 3630, 3680, 3690, Industrials: 20C, 30B, 30D, 30H, 40B, 50C, 50D, 50E, 50F, 50HX, 60H, Forklifts: 4500, 6500. Can replace Perkins 26560602, 1896287M91. (Item #: 125902, Ref: 3405419M1) $19.80

No
Picture
Fuel Injection Pump - For tractor models 265, 275, 261, 270, 670, 50E, 50H, 60H. Replaces 1447175M91 and CAV3241F350. (Item #: 117637, Ref: 1447170M91) $850.00

No
Picture
Fuel Injection Pump - For tractor models 175UK, 178, 194, 265, 385, 294, 50E, 50H, 60H. Replaces 1446874M91, CAV3241F101, 102, 103, 104. (Item #: 154808, Ref: 1446875M91) $913.00

Fuel Injector - For 50C, MF175, MF180, MF265. Replaces: (1446761M91 Used Engine Serial Number 236UA43100 And Up) and (734722M91 Used Prior To Engine Serial Number 236UA43100). Replaces 1446761M91 and 1447228E91 (Item #: 115533, Ref: 1446761M91-EX) $54.00

Fuel Injector Washer - One of these is used per Injector on Perkins Engines with CAV type fuel systems. It replaces 376 091X1, 376091X1, 396091X1, 921173, TX50039, 115 16 214, 118358ES, 159553A, 1830 105 000, 70251284, 81716268, M03-47-03. (Item #: 168623, Ref: 921173) $0.70

Fuel Lift Pump - Fuel pump for A4-236 and A4-248 Diesel Engines, four-hole mounting. For tractors: MF175 engine serial number 236UA57083 and up, MF180 engine serial number 236UA57265 and up, MF184-4, MF255, MF265, MF270 early production, MF274-4 to tractor serial number 221N00936, MF275, MF294-4 to tractor serial number 2230003. Replaces 1447017M91, 1447688M91, 3637290M91, 3637300M91, 3637444M91, 3640785M1, 3641402M91, 375839X1, 376522X1, 4222091M91, 4222108M91, 740861M1, U5T0059, 3637300M1. This Pump uses S40567 Repair Kit. (Item #: 117603, Ref: 3637300M91) $22.80

Fuel Shut Off - Fuel shut-off and strainer. For odels: 165, 168, 175, 178, 185, 188, 265, 270, 275, 282, 285, 290, 298, 50E, 50F, 50H, 565, 575, 590, 60H, 6500, 675, 6800H, 690. All with either A4.212, A4.236, A4.248 engines. Replaces 890438M1. (Item #: 151836, Ref: 898580M91) $11.10

Fuel Tank Mounting Bushing - This fuel tank mounting bushing may come not looking exactly like pictured. There are slight variations. Rubber bushing is 15/16 tall with a 1/4 diameter bolt. For tractor models 165, 168, 175, 178, 185, 188, 265, 270, 275, 285, 290, 298, 30D, 30E, 392S, 50E, 50B, 50D, 50F, 50H 60H, 283 UK. (Item #: 151856, Ref: 883623M1) $7.20

Heater Plug - Heater Plug Thermostat Burner with Thread Connector. Also replaces 13H2468 and 2666103. For 1007, 1014, 1114, 1134, 1250, 135, 148, 165, 168, 174, 175, 178, 185, 188, 20B, 20D, 20E, 20F, 230, 240, 250, 255, 265, 274SK, 275, 285, 290, 3050, 3060, 3065, 3070, 30D, 30E, 30H, 35, 350, 353, 355, 360, 363, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E, 50, 50B, 50D, 50E, 530, 535, 550, 560, 565, 575, 590, 60H, 65, 660, 665, 675, 690, 698, 699, 800, 805, 820, 825, 830, 835, 840, 845. Replaces 2666103, 893501M91, 893501M1, 893501V91 (Item #: 129233, Ref: 893501M1) $15.60

Injector Line Leak Off - This Injector Line Leak Off pipe is used on 4 cylinder Perkins Engines with CAV type fuel systems. It replaces 35587344, 734723M91, 035 - 8008, 70257263 (Item #: 165870, Ref: 35587344) $35.10

Injector Line Set - This kit contains Massey Ferguson part numbers: 744512M91 No. 1 Cylinder Line Assembly (Perkins No. 35343025), 744513M91 No. 2 Cylinder Line Assembly (Perkins No. 35343026), 744514M91 No. 3 Cylinder Line Assembly (Perkins No. 35343027) and 744515M91 No. 4 Cylinder Line Assembly (Perkins No. 35343028). It is used on 4 cylinder Perkins Engines with CAV type fuel systems. This set replaces OEM numbers 35343025, 35354266, 3641094M91, 735099M91, 744512M91, 353403025, 35354266, 3641094M91, 3641262M91, 735100M91, 744512M91, 744513M91, 35343027, 35354293, 3641095M91, 735101M91, 735761M91, 744514M91, 35343028, 35354289, 3641156M91, 735102M91, 735102M92, 738890M91, 744515M91. Verify your numbers with parts manual. For Fuel Line Seal Kit order 187517 (Item #: 178167, Ref: S41522) $43.57

Injector Nozzle - For tractor models 174-4S, 184-4, 261, 265, 270, 274-4, 3050, 362, 374S, 375, 384S, 670, 50C, 50D, 50E, (6500 forklift SN# 236UA112128L and up), 6500H Forklift, 6800H Forklift. Replaces BDLL150S6705. (Item #: 179932, Ref: 1447227M1) $35.90

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $38.20

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $19.00

No
Picture
Sending Unit - Fuel tank sending unit. For tractor models MF270, MF282, MF283 except Brazil, MF290, MF298 and Industrials: 50E, 50F. Replaces 16996610M1. (Item #: 119761, Ref: 1678517M2) $54.00

Gauges

Fuel Gauge - For tractor models (20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 260, 265, 275, 285, 290, 298, 30E, 40E, 50B, 50D, 50E, 50F, 550, 565, 575, 590, 595), (2620, 2640, 2680, all with serial number <271212), 50, serial number 87500>. Fuel Gauge. 2 inch body diameter. Replaces 1877717M92, 1877717M93 (Item #: 104118, Ref: 1877717M92) $22.60

Lamp Housing - For tractor models 231, 240, 250, 253, 270, 283, 290, 298, 20D, 20E, 30E, 40E, 50E. Replaces 1663555M92, 1663555M93 (Item #: 184514, Ref: 1663555M92) $17.30

Switch, Water Temperature Sending Unit - Sending unit, water temperature. For tractors: MF25, MF130, MF154-4, MF154-S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF254-4, MF270, MF274-4, MF283 except Brazil, MF285 to serial number 9A34239, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF2675, MF2705, MF2745, MF2775, MF2805, MF3050, MF3060, MF3070, MF3090, MF3505, MF3525, MF3545, MF3630, MF3650, MF3660 Industrials: 20D, 30E, 40E, 50E. Replaces 1877731M92, 1877731M93, 1877731V92, 531209M1 (Item #: 121163, Ref: 1877731M92) $6.90

No
Picture
Tachometer Cable - Tachometer Cable Assembly, 54 inches long, 1/2 inch UNF drive end, and 5/8 inch UNF load end. For tractors: FE35, 35X, MF270, MF282, MF290L, 1080, 165, 168, 175, 178, 180, 185, 188, 271, 275, 283, 281 and Industrial: 30D, 50E. Replaces 876289M92, 827855M1, 1876289M93 and 960941M1. (Item #: 104135, Ref: 882021M91) $11.60

Tractormeter Drive with Gasket - 1/2 inch diameter. UNF thread. For tractor models 154-4, 165UK, 184-4, 194-4F, (240 with engine CE31244), 165 UK, 253, 254-4, 261, (265 up to serial number 9A349239), 270, 274-4, 282, 283, 283 UK, 290, 294-4, 298, 362, 375, 383, 390, 390T, 398, 670, 690, 698, 699, 50E, 50F, 50H, 60H. Replaces 2758346. (Item #: 121518, Ref: 1853144M1) $33.90

Tractormeter - Illuminated - With MPH. Fits 261, 270, 282, 283, 290, 298, 50E. Replaces 1674637M91 and 1875187M92. Uses drive part number S.41095. (Item #: 104131, Ref: S.41077) $28.10

Hitch / Drawbar

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.10

Leveling Box Assembly - With Hand Crank adjusts from 20.5 inches to 26 inches. For tractor models 65, 175, 180, 205, 230, 240, 245, 250, 253, 255, 270, 283, 290, 298, 302, 304, 360, 362, 390, 390T, 393, 399, 670, 690, 3090, 3120, 3140, 3165, 30E, 40E, 50E. Replaces 893569M92, 1884760M92, 1884760M94. (Item #: 110256, Ref: 1884760M92) $70.00

Leveling Box Assembly, RH, Heavy Duty, Less Fork - Adjustment from 24.00 inches to 32.00 inches. For tractor models 175, 185, 265, 270 UK, 275, 285, 375, 383 UK, 390 UK, 393 UK, 398 UK, 50E, (670, 690 France). (Item #: 163453, Ref: 1864977M92) $71.00

Lift Arm Ball with Clip, Category II - This ball measures: Inside Diameter: 1-1/8 inches, Outside Diameter: 2-1/4 inches. Width: 1-3/4 inches. Includes retaining clip. Replaces 886429M1, 1860936M1 (Item #: 192517) $13.50

Lift Arm End, LH - Lift arm end, category I, left hand, 7/8 inch pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Item #: 150266, Ref: 184464M92_) $51.00

Lift Arm End, RH - Lift arm end, category I, right hand, 7/8 inch pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Item #: 150265, Ref: 184463M92) $49.60

Lower Lift Arm Pin - Used on tractors with square axles, this pin is 5 1/2 inches long and 1 1/8 inches in diameter. Replaces part numbers 906263M2, 1695314V1, 1695314M1, 1695531M1, 1867243M1, 354101X1 (Item #: 173351, Ref: 1695314M1) $13.60

RH Heavy Duty Level box Assembly. with Fork - For tractor models 175, 185, 265, 275, 375HD, 50E, (670, 690 ALL FRANCE), (270, 383, 390, 393, 398 ALL UK). Adjustment from 24.000 inches to 32.000 inches center to center hole. (Item #: 172700, Ref: 1863053M94) $119.00

Top Link Pin, Hinged - Hinged Top Link Pin. Category I, hinged upper hitch pin assembly 3/4 inch diameter, 9-5/8 inch useable Length. For tractors: TO35, MF35, F40, MF50, MF65. For MF135, MF150, MF35, MF50, TO35 and others. Replaces 180901M91, 180901M1 (Item #: 173190, Ref: 180901M91) $6.70

Hydraulic System

Auxiliary Pump Drive Gear - This Auxiliary Pump Drive Gear has 58 teeth and 21 splines. It is used on Massey Ferguson models 135, 150, 165, 175, 20C, 20E, 230, 235, 240, 240S, 243, 245, 250, 250X Brazilian, 253, 255, 265, 270, 275, 283, 290, 30, 30E, 31, 40B, 451, 50C, 50E. Replace OEM number 1868540M1 (Item #: 187207) $176.00

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Item #: 173324, Ref: 897504M1) $0.90

Draft Control Plunger - This Draft Control Plunger has a 1.865 Inch Head Diameter. It replaces original part numbers 898136M1, 886348M2, 886351M1 (Item #: 163454, Ref: 898136M1) $19.10

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35, TO30, TO20, TE20. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Item #: 165989, Ref: 9N547B) $35.30

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Item #: 173302, Ref: 898124M1) $12.70

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.00

No
Picture
Draft Control Shaft - This Draft Control Shaft is used on 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E. Replaces 1870243M92 (Item #: 170866, Ref: 1870243M92) $12.00

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Item #: 180233, Ref: 898127M2) $5.70

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $450.00

Hydraulic Cylinder Stud, 3 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 3 Inch Stud. Verify length before ordering. Replaces 1667579M1, 1667580M1, 1667580M2, 899258M1 (Item #: 173649, Ref: 899258M1) $7.70

Hydraulic Cylinder Stud, 4 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 4 Inch Stud. Verify length before ordering. Replaces 1667579M2, 1667579M1, 908934M1, 899257M1. (Item #: 173644, Ref: 899257M1) $5.30

Hydraulic Cylinder Stud Nut - Hydraulic Stud Nut is used with 899258M1 and 899257M1 Studs. It is 9/16 UNF Thread (Din 934). Replaces 368749X1 (Item #: 173194, Ref: 368749X1) $11.20

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $116.00

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Lift Pump - For tractor models 230, 245, 250, 255, 265, 275, 283, 298, 50C, 670, 690, 698, 699), (20C, 30 Ind. all axle serial number FE101> without pressure control), (30B, 40 all axle serial number FF100> without pressure control), (30E, 50E all less auxiliary hydraulic) 240 8/91>. Hydraulic Lift Pump. Replaces 1661616M91, 1672148M92, 1675125M91, 1872449M96. (Item #: 113740, Ref: 1683301M92) $470.00

Hydraulic Piston - For tractor models 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50D, 50E, 670, 698, 699. Seal kit is available as part number 2528201K1 . Piston is 3.375 inch diameter. (Item #: 173143, Ref: 1665738M91) $48.90

Hydraulic Pump Camshaft Bushing - This Hydraulic Pump Camshaft Bushing is used on MK1 and MK2 Pumps. It has an inside diameter of 1-3/8 inches, outside diameter of 1-5/8 inches and is 7/8 inches wide. Replaces OEM numbers: 1664491M1, 1664491M2, 195949M1, 1865012M1, 1865012M1 (Item #: 167290, Ref: 1664491M1) $5.60

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Peg with Hand Bake - Used on Massey Ferguson models: 165, 168, 175, 178, 185, 188, 20F, 230, 240, 250, 253, 261, 275, 283, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. This peg supports the hydraulic pump on the inside of the tractor, and a hand brake on the outside of the tractor. If you need a gasket, order part number 180904M1. (Item #: 189383, Ref: 898937M1) $37.60

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.80

Hydraulic Valve - For tractor models 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20C, 230, 240, 245, 250, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 31, 350, 355, 365, 375, 390, 398, 399, 40, 40B, 50C, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. This valve is 7.75 inches long. Replaces 3000261X1, 1870763M92, 1681786M1 (Item #: 165752, Ref: 1870763M92) $39.20

Hydraulic Valve Kit, Remote Control - This 1 levered, Single Spool Valve includes hoses, quick couplers. The left lever shifts it from 3 point to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 1960s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 164384, Ref: S.65502) $527.00

$Massey Ferguson 50E Lift Arm, LH\RH$
Lift Arm, LH/RH - Used with 897567M3 Cross Shaft (51 spline). It uses a 7/8 inch pin. For tractor models 1080, 1085, 165, 175, 180, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. Replaces 1680040M91, 1680033M1, 1680040M91, 885445M91, 885447M1, 885448M1, 897579M1. (Item #: 151048, Ref: 1680040M91) $57.00

Lift Cylinder Piston Seal Kit - Used with 1665738M91 piston. For tractor models 20, 20C, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50E, 135, 165, 175, 180, 230, 235, 245, 255, 265, 270. (Item #: 173353, Ref: 2528201K1) $7.60

Lift Handle Knob and Stud - Knob For tractor models 35, 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 270, 275, 282, 283, 285, 290, 298, 698, 699, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 2135, 3165. Replaces 1860403M1, 898201M1 (Item #: 163511, Ref: 1860403M1) $9.30

Lift Pump - For tractor models 135, 150, 165, 175, 20C, 235, 245, 255, 265, 275, 30, 31, 40B, 50C, 50D, (30E, 50E, 178 ALL UK). 12 Spline Shaft. (Item #: 119896, Ref: 886821M94) $222.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $8.90

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.90

Lift Pump Relief Valve - For tractor models FE35, 135, 20F, 231, 240, 240P, 253, 30E, 35, 350, 355, 365, 375, 390, 398, 399, 40E, 50E, 65, 765, FE135 COVENTRY. (2800 pound psi). (Item #: 170916, Ref: 828927M92) $20.90

Lift Response Plate - This Lift Response Plate is used on Massey Ferguson Tractors: 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1884877M93, 1872648M93 (Item #: 173307, Ref: 1872648M93) $52.00

Link Head - For tractor models 135, 165, 175, 180, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 298, 30, 30B, 30D, 30E, 31, 362, 383, 390T, 391, 392, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. (Item #: 172689, Ref: 1863389M1) $47.80

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Item #: 173462, Ref: 886410M1) $28.00

Pressure Control Shaft - Used on some or the following Massey Ferguson Models: 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E, this part measures 10 - 9/16 inches. Verify measurement before ordering as many of these models used more than one size. (Item #: 170902, Ref: 1870219M93) $18.10

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $3.90

Quadrant Support - This Quadrant Support is used on Massey Ferguson 135UK serial 439191 and up, 165UK serial number 132849 and up, 230 with Lift Cover 1870952M91, 231, 235 with Lift Cover 1870955M1, 255, 265, 270, 275, 282, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 390, 698, 699, Industrial 20 with Lift Cover 1870955M1, 20C with Lift Cover 1870950M91, 20D, 20E, 20F, 30 with Lift Cover 1870955M1, 30B, 30D, 30E, 40 with Lift Cover 1870955M1, 40B, 40E, 50C, 50D, 50E. Replaces 1870240M1 (Item #: 164696, Ref: 1870240M1) $32.10

Response Control Shaft - This Response Control Shaft is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 898208M2 (Item #: 179593, Ref: 898208M2) $24.00

Response Cover - This Response Cover is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1668053M1 (Item #: 180324, Ref: 1668053M1) $16.50

Response Lever - This Response Lever is used on 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1662278M2 (Item #: 180325, Ref: 1662278M2) $4.40

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Standpipe, Hydraulic Oil Pressure - 9.75 inches long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Item #: 155347, Ref: 1869119M1) $16.80

Transmission and Hydraulic Filter - Filter, hydraulic oil cooler, multi-power transmission. Measures 4.5 inches long, 1 3/4 inch diameter with a 1 inch hole. For tractors: Super 90, MF135, MF165, MF175, MF180, MF1080, MF1100, MF1130 industrials: 30, 30B, 30E, 40, 50A, 50E, 50F, 204, 205, 302, 304. (Item #: 126305, Ref: 191855M4) $28.30

Lights

$Massey Ferguson 50E Flasher\ Blinker Switch$
Flasher/ Blinker Switch - Used on Massey Ferguson models 20E, 20F, 30E, 40E, 50E, 240, 275 UK, 290 UK, 2640, 271, 281, this Hazard Light Switch replace part numbers 1671544M2, 1671544M1, 1682977M1, 1604409M1 (Item #: 169934, Ref: 1604409M1) $32.30

Light Switch With Knob - Light Switch with knob 509309M1. 5 Terminal. For tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF250, to serial number 2773N01000, MF255, MF265, MF270, MF275, MF285, MF288 except Brazil, MF290, MF298, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150. Replaces 772954M1, 522812M1, 522813M1, 509309M1 (Item #: 111508, Ref: 772954M1) $28.22

Rear Light - Rear light (right hand). For tractor models 20F, 230, 250, 253, 263, 30E, 340, 40E, 50E, 265 serial number 185158 and up, 240 serial number 513171 and up, 275 UK MODEL serial number 214013 and up, 290 UK MODEL serial number 347016 and up. (Item #: 122680, Ref: 1678869M92) $20.20

No
Picture
Rear Light - Left Hand - Rear light (left hand). For tractor models 20F, 230, 250, 253, 263, 298, 30E, 340, 40E, 50E, 265 (serial number 185158>), 240 (serial number 513171>), 275UK (serial number 214013>), 290UK (serial number 347016>). (Item #: 122680, Ref: 1678869M92) $20.20

Tail Light-LH - Rear light (left hand). For tractor models 20F, 230, 250, 253, 263, 298, 30E, 340, 40E, 50E, 265 (serial number 185158>), 240 (serial number 513171>), 275UK (serial number 214013>), 290UK (serial number 347016>). (Item #: 122681, Ref: 1678868M92) $22.40

Oil System

Oil Pickup Strainer - Used on Perkins A4.212, A4.236 and A4.248 engines, this part replaces; Massey Ferguson part number 734839M91, Perkins part number 37725443. (Item #: 179650, Ref: 734839M91) $25.20

Oil Pump - This Oil Pump is for Tractors with 6 Bolt Balancer in Perkins Engines. Replaces original part numbers 4132F041, 3637489M91, 3637489V91, 4132f021, 293177A1 (Item #: 158008, Ref: 4132F041) $57.00

Oil Pump for 4 Bolt Balancer - This Oil Pump is used inside a 4 bolt balancer on Perkins Engines. Used on Massey Ferguson: 175, 180, 255, 265, 261, 270, 31, 50C, 50D, 50E, 50F, 60, (6500 AD4.236 Direct injection), 275, 283, 290, 690, 50H, 60H, 294, 383, 390, 394, 3050, 3060, 50E. Replaces 743194M1, 734850M1, 743020M1, 736510M1, 743206M91. (Item #: 179580, Ref: 743194M1) $96.00

PTO / Driveline

Bearing - Bearing, for PTO front drive shaft housing, 2.8120 inch outside diameter determine bearing outside diameter before ordering. For 6 and 8 speed and multi-power transmissions. Replaces 899377M1, 3760514M1, 899377M2 (Item #: 176234, Ref: 899377M2) $22.20

No
Picture
Output Shaft, PTO Seal - A PTO output shaft outer oil seal measures 2.323 inches inside diameter, 3.150 inches inside diameter and is .394 inches wide. For tractors: MF230 axle serial number FD101, CD8028 and up, MF231, MF235 live PTO with axle serial number FD101 and up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to serial number P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle serial number FD101, CD8028 and up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle serial number FD101 and CD8028 and up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860. Verify measurements to make sure you are ordering the correct seal. (Item #: 107013, Ref: 834216M1) $8.40

PTO Cap - For tractor models 230, 235, 240, 243, 245, 250, 253, 255, 260, 263, 265, 270, 275, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 20, 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H, 50HX, 60H. (Item #: 119997, Ref: 532888M1) $11.80

PTO Clutch Spring - Used on tractors with Independent Power Take Off (IPTO) on Massey Ferguson 1004, 1004T, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 185, 188, 20E, 230, 240, 250, 253, 255, 260, 2620, 2640, 265, 2680, 270, 2720, 275, 285 (FR), 290, 290 Brazilian, 290 US Built, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30E, 3115, 3120, 340, 350, 355, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40E, 50E, 50H, 550, 560, 565, 575, 590, 592, 595, 60H, 670, 675, 690, 698, 698699, 698T, 699. Replaces 1660406M1, 3795274M1, 514210M1, 1870857M1 (Item #: 117299, Ref: 1660406M1) $7.20

PTO Cover, LH - For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 30B, 30D, 30E, 392S, 40B, 40E, 50E. Replaces 888108M1, 3760665M1 (Item #: 167527, Ref: 3760665M1) $24.30

PTO Disc - 5.039 inch outside diameter, 3.457 inch inside diameter, 57 internal teeth. For tractor models FE35, 20C, 30, 30E, 31, 35, 40B, 40E, 50, 50C, 50D, 50E, 65, 85, 88, 90, 135, 150, 165, 175, 180, 235, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 398, 670, 690, 698, 699, 1080, 1085, 1155, 4800, 4840. Replaces 190177M1, 533326M2, 1870879M1. (Item #: 114029, Ref: 1672626M1) $10.80

PTO Fork - For tractor models 20, 20C, 230, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 30B, 30E, 350, 360, 362, 375, 383, 390, 40B, 50E. (Item #: 167531, Ref: 1870594M92) $27.30

PTO Gear - This is first gear for the PTO. For tractor models 135, 148, 150, 168, 185, 188, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590, 165 STANDARD TRANSMSSION/MULTI-POWER SERIAL NUMBER 130774->. For 8 speed transmission, 53 teeth, 21 splines. (Item #: 166907, Ref: 1868532M1) $76.00

PTO Gear, Constant Mesh - This Constant Mesh Gear has 53 Teeth and 15 Splines. Used on Massey Ferguson 135, 150, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590. It replaces part number 899329M1 (Item #: 153626, Ref: 899329M1) $98.00

PTO Lever, Aluminum - This is an Aluminum PTO Lever used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 240, 250, 270, 282, 283, 20, 20B, 20C, 20F, 30B, 30E, 40B, 40E, 50E (Item #: 155294, Ref: 1863502M1) $33.30

PTO Lever Knob - This PTO Lever Knob is used with 1672622M94 PTO Lever. It replaces original part number 1877461M1 (Item #: 167635, Ref: 1877461M1) $4.60

PTO Lever, Steel - This is a Steel PTO Lever used on 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 240, 250, 270, 282, 283, 20, 20B, 20C, 20F, 30B, 30E, 40B, 40E, 50E. Order 1877461M1 knob if needed. Replaces original part number 1672622M94 (Item #: 123092, Ref: 1672622M94) $8.70

PTO Shifter Assembly Kit - This Kit contains one each of: 3760665M1 PTO Cover, 1870594M92 PTO Fork, 1672622M94 Lever, 1877461M1 Lever Knob, 180417M1 Plunger Spring, 180418M2 Detent Plunger and 181217M1 Gasket. (Item #: 182983, Ref: 888108KIT) $77.00

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Item #: 886366M91) $178.34

Retaining Plate - Used to retain the PTO Seal Housings 532880M1 and 180465M1, this part replaces Massey Ferguson part numbers 1663254M1, 532887M2, 184365M3. Used on 1004, 1004T, 1200, 1250, 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 230, 231, 235, 240, 243, 245, 250, 253, 255, 260, 261, 2625, 263, 2635, 265, 265S, 270, 275, 282, 283, 285, 285S, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 390, 390E, 390T, 396, 398, 399, 40, 40B, 40E, 410, 420, 50, 50C, 50D, 50E, 50H, 560, 565, 575, 590, 60H, 65, 675, 690, 698, 698T, 699, 765. Many of the models listed had more than one PTO system, verify part number before ordering. (Item #: 179426, Ref: 532887M2) $21.30

No
Picture
Sealing Ring - Sealing Ring, Used on Independent PTO Clutch Packs (2) used. (Item #: 183806, Ref: 541551M1) $7.40

Seats

No
Picture
Seat Adaptor - Seat Riser, for mounting TISCO suspension seats TS1050 and TS1050AT. Use if additional clearance is needed between seat base and lift linkage when seat is moved to most rearward position. Can also be used as replacement for riser OEM production seats. For tractor models 40E, 50E, MF240, MF290, MF298. (Item #: 180251, Ref: 1674414M93) $56.00

Sheet Metal / Body Parts

Fender Extension Plate - If you have 11 x 32 wheels are are replacing your fenders you may need these extensions to accommodate your tire size. Used with fenders: 1884287M97 and 1884286M97. Replaces 884219M1, 884219M91, 1690462M2, 1690462M3, E250PA9 (Item #: 182617, Ref: 1690462M2) $21.10

Fender, Left - For 135, 135 Gas / 135 Petrol, 148, 20D, 20F, 230, 240, 250, 253, 270, 298, 30E, 35, 35 Gas / 35 Petrol, 35X, 50E, FE35, TEA20, TED20, TEF20. Left Fender with Bracket. Call 1-800-853-2651 for rate. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. This part ships via truck freight. Please call for pricing and ordering. (Item #: 104155, Ref: 1884287M97) $202.00

Fender, Right - For 135, 135 Gas / 135 Petrol, 148, 20D, 20F, 230, 240, 250, 253, 270, 298, 30E, 35, 35 Gas / 35 Petrol, 35X, 50E, FE35, TEA20, TED20, TEF20. Rounded (not Flat-Top). Right fender with bracket. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 1690373M93, 1693057M91, 1884286M97. (Item #: 104154, Ref: 1884286M97) $193.00

Hood, Dash and Grill Rubber Bumper - 1/2 inch outside diameter X 7/16 inches tall. For tractor models 20C, 20D, 20F, 30B, 30E, 30H, 40B, 40E, 50A, 50C, 50D, 50E, Super 90, TE20, TO20, TO30, 30, 31, 60, 65, 85, 88, 135, 150, 165, 175, 180, 202, 203, 204, 205, 230, 231, 235, 240, 245, 250, 255, 265, 302, 303, 404, 1080, 1100, 1130, 1150, 2135, 2200, 2640, 2675, 2705, 2745, 2775, 2805, 3165, 3505, 3525, 3545, 4500, 6500, MF 20, MF 25, MF 35, F40, MF (Ag and Ind): 40, 50, TO35. Replaces: 194768M1. (Item #: 163112, Ref: 180673M1) $2.80

Steering

Axle Pin, Front - Hardened, 1-7/8 inch diameter, 11-1/8 inch length, 1/4 inch hole, 1-1/2 inches from threaded end. For tractor models (165 UK with Perkins A4.212, AD4.212), 261, 270, 283, 290, 298, 670, (690, 698, 699 2WD), Industrial 50E. Replaces 898016M3. (Item #: 173186, Ref: 1684285M1) $47.50

Bushing, Front Axle - 2.070 inch outside diameter, 1.880 inch inside diameter, 2.00 inches long. For tractor models 168, 175, 178, 188, 24, 25, 255, 265, 270, 275, 282, 283, 285, 290, 360, 362, 383, 390, 390T, 393, 398, 399, 40E, 50E, 50H, 50HT, 565, 575, 60H, 60HT, 6500, 670, 675, 6800, 690, (165 South Africa only). (Item #: 176236, Ref: 897712M2) $16.30

Bushing, Steering Arm - Bushing, main steering arm assembly or power steering cylinder support. Tractors: MF50, MF65, MF135, MF150, MF165, MF175, MF255, MF265, MF270, MF275, MF282, MF285, MF290, MF670, MF690. Industrials: 30, 31, 50F, 50H, 302, 304. Measures 3/4 inch inside diameter, 7/8 inch outside diameter, 1-1/4 inch length. Replaces VPJ5244, 190560M1 (Item #: 128534, Ref: 190560M1) $8.40

Hub Seal, MFWD - Extensively used on Carraro mechanical four wheel drive front axles, this hub seal measures 149mm (5.86614 inches) x 176mm (5.86614 inches) x 16mm (0.629921 inches). Replaces OEM numbers 9968085, K395102, 47108806, 83996064, 82920209, 294169A1, 247877A1, 130182A1, 1349265C1, CAR126324, CAR47705, 3225110, 0003225110, 82920209, 3996064, 83996064, 83957862, 9968085, 153326219, 153326621, 1349265C1, 153326301, 09968085, 83952509, 83952530, CAR118556, CAR126324, CAR47705, CAR126390, 3501510M1, 3475598M1, 3475533M1, 3523062M1, 3541510M1 (Item #: 157753, Ref: 247877A1) $56.00

Linkage Pin - For tractor models 165 UK, 175 UK, 178, 261, (265S made in Tukey), 270, 271, 275 UK, 281, 282, 283, 283 UK, 290, 290 UK, 50E, 50F, 50H, 50HX, 60H, 670, 690. (Item #: 172697, Ref: 1471634M2) $16.40

Orbital Steering Unit Seal Kit - For Danfoss Unit. Fits tractor models 1014, 1114 serial number 1110249 - 2422U38048, 1134 serial number 1240062 - 2424U41042, 20F, 265, 275, 285 with Hydro Static Steering, 290 with Hydro Static Steering, 298 with Hydro Static Steering, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3095, 30D, 3115, 3120, 3125, 340, 342, 350, 352, 353, 355, 360, 362, 363, 3635, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E Utility and Turf with Manual Shuttle Transmission, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T. (Item #: 165413, Ref: 1810503M92) $29.80

Power Steering Cylinder - This Power Steering Cylinder DOES NOT come with the Pivot Pin as pictured. The Pin is available as Part Number 1471630M1. This cylinder is for tractor models (255 up to serial number 9A324146), (265 up to serial number 9A324139), 270, (275 up to serial number 9A324137), 283, 283UK, (285 up to serial number 9A281393), 290, (670, 690 both 2WD), (50E, 50H, 50HX, 60H up to 4/1987 2WD), 50F. Replaces 3773711M91, 532193M91. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 129311, Ref: 1605121M92) $160.00

Power Steering Pump - For tractor models 50E, (275, 298, 30D, 565, 575, 590, 675, 690 ALL WITH HYDRO STATIC STEERING), 265 4WD. Replaces 1666726M93, 1666727M92, 1808289M91, 3774649M91 (Item #: 155883, Ref: 3774649M91) $309.00

Power Steering Pump - For Massey Ferguson Construction and industrial models 24, 25, 30E, 30H, 40E, 50E, 50F, 50H, 50HX, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 1685031M92, 1685031M91, Replaces Sunstrand manufacturer number 27364, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157782) $500.00

Power Steering Pump Seal Kit - For tractor models 165, 168, 185, 188, 265, 270, 275, 282, 283, 290, 298, 362, 375, 383, 390, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 30D, 50, 50E. Replaces part number 1635948M1. (Item #: 170118, Ref: 1635948M92) $18.70

Steering Arm, Main - Main spline at 180 degrees to split. For tractor models 261, 283, 290, 670, 690, 50E, 50F, 50H. (Item #: 105207, Ref: 1471699M92) $84.40

Steering Shaft Bushing - Bushing (metal), for steering shaft, used in front axle support, 2 required. Tractors: MF165 (except LPG), MF175, MF255 (prior to serial number 9A324146), MF265 (prior to serial number 9A324139), MF270, MF275 (prior to serial number 9A324137), MF282, MF283 (except Brazil), 285 (prior to serial number 9A349239) MF290, MF670, MF690, MF699. Industrials: 30, 31, 3165. Also used in power rack, upper bushing only. Tractors: MF180 (serial number 9A48873 and up), MF1080, MF1100, MF1130, MF1150, MF1155. Row Crop and Western Models. Tractors: MF1085, MF1105, MF1135. Replaces 194624M1, 533792M1, 40118, M02-04-03, M02-04-05, 897235M1, 194624M1, 843854M1. I.D.: 1.876 inches, O.D.: 2.0 inches, Length: 1.5 inches. (Item #: 117581, Ref: 897235M1) $7.10

Steering Shaft, Manual Steering - 1.870 inch diameter, 11.375 inches long. For tractor models 165 UK, 168, 175 UK, 178, 185, 188, 265S, 270, 275 UK, 283, 290, 392S, 50E, 50H, 565, 575, 590, 670, 675, 690. Replaces 898023M2. (Item #: 105214, Ref: 1676666M1) $80.41

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Steering Wheel Nut, Chrome - Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench. (Item #: 150988, Ref: 351103CC) $8.10

Thrust Bearing - Thrust bearing, front axle spindle. For industrials: 40B serial number 9A326404 and up, 50, 50A, 50C, 50D, 50E, 302, 304. For steering axle on forklifts: 2500, 6500, 6500H. For 2500, 302, 304, 40B, 50A, 50C, 50D, 50E, 50, 6500H, 6500. (Item #: 169780, Ref: 832961M1) $29.40

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.20

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.80

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.90

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.90

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.40

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $97.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $22.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $28.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Massey Ferguson 50E Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Ferguson 50E Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Massey Ferguson 50E Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 50E Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Massey Ferguson 50E Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Massey Ferguson 50E Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Massey Ferguson 50E Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.08

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.10

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Massey Ferguson 50E Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.60

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.00

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $70.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $90.00

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $68.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $89.00

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.30

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $90.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.20

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $89.00

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $77.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $76.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $257.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.62

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $64.00

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $140.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $872.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $75.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $303.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $102.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $430.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $57.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $71.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $27.00

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.40

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $90.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $35.00

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $11.00

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $53.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $22.10

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.70

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $56.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $24.00

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $138.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.01

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $91.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $5.40

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $56.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $132.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $147.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $140.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00