FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 360 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Accessories / Supplies

Engine Block Heater - For tractor models 135, 150, 230, 231, 235, 240, 245, 250, 253, 254-4, 282, 283, 298, 360, 364S, 399, 698. Engine Block Heater for 1 1/4 inch opening in block. 600 watts, 120 volts. (Item #: 120029, Ref: 19841A91) $73.00

Belts

No
Picture
Belt - Fan - For Massey Ferguson tractor models 243, 253, 263, 360, Compatible with Massey Ferguson Construction and industrial models 30H (With Power Shuttle Transmission), Replaces Massey Ferguson OEM number 1693746M1, 1693746M91, Length: 46.25", Width: 1/2", Material: Polyester Cord, (Item #: 182030) $20.20

Brakes

Actuator Rod Seal Kit, Slave Cylinder - For tractor models (360, 375, 383, 390, 398, 399 up to serial number V39466). (Item #: 179486, Ref: 1810881M91) $40.60

Brake Actuator, Left Side - This is a Left Side Brake Actuator used on Massey Ferguson 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 382, 390, 390T, 396, 398, 399, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4315, 4320, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5340, 5355, 5360, 5365 Replaces 3596776M91 (Item #: 160569, Ref: 3596776M91) $14.90

Brake Actuator, Right Side - This is a Right Side Brake Actuator used on Massey Ferguson 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 382, 390, 390T, 396, 398, 399, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4315, 4320, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5340, 5355, 5360, 5365 Replaces 3596778M91 (Item #: 160570, Ref: 3596778M91) $99.78

Brake Cylinder, Master - Brake cylinder, master assembly. Inside diameter .70 inches. Tractors: MF360 (to engine serial number V39466), MF375 (to engine serial number V39466), MF383 (to engine serial number V39466), MF390 (to engine serial number V39466), MF398 (to engine serial number V39466), MF399 (to engine serial number V39466). (Item #: 150906, Ref: 3595504M2) $73.00

Brake Cylinder, Master - Brake cylinder, master assembly. Inside Diameter .625 Inches. Tractors: MF360 (engine serial number V39466 and up), MF362, MF375 (engine serial number V39467 and up), MF383 engine serial number 39466 and up), MF390 (engine serial number V39466 and up), MF390T (engine serial number V39466 and up), MF398 (engine serial number V39466 and up), MF399 (engine serial number V39466 and up). (Item #: 113744, Ref: 3596785M92) $59.00

Brake Cylinder, Slave LH - This is a Left hand Brake cylinder, Slave assembly. Tractors: MF360, MF362, MF375, MF383, MF390, MF390T, MF393, MF396, MF398, MF399. Replaces original part numbers 3477380M1, 3477380M91, 3477380M92, 3477380M93, 3477380V93 (Item #: 119861, Ref: 3477380M93) $104.00

Brake Fluid Reservoir - Threaded bottom outlet. For tractor models 360, 362, 375, 383, 390, 390T, 3939, 396, 398, 399. (Item #: 153864, Ref: 1696930M4) $21.80

Brake Master Cylinder Seal - Left - For Massey Ferguson tractor models 360, 375, 383, 390, 398, 399, Replaces Massey Ferguson OEM number 1694264M91, LH Master Cylinder, For Right Master Cylinder Seal use Item #: 153898, (Item #: 153896) $16.00

Brake Master Cylinder Seal - Right - For Massey Ferguson tractor models 360, 375, 383, 390, 398, 399, Replaces Massey Ferguson OEM number 1694265M91, RH Master Cylinder, For Left Master Cylinder Seal use Item #: 153896, (Item #: 153898) $14.60

Brake Slave Cylinder (RH) - This brake slave cylinder is used on Massey Ferguson 340, 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 382, 382N, 383, 390, 390T, 398, 399. It replaces original part numbers 3477 381M91, 3477381M91, 3477381M92, 3477381M93 (Item #: 119860, Ref: 3477381M91) $89.00

Cable - Hand Brake - For Massey Ferguson tractor models 360 (s/n V39466 - later), 362 (s/n V39466 - later), 365 (s/n V39466 - later), 375 (s/n V39466 - later), 383 (s/n V39466 - later), 390 (s/n V39466 - later), 393 (s/n V39466 - later), 396 (s/n V39466 - later), 398 (s/n V39466 - later), 399 (s/n V39466 - later), Replaces Massey Ferguson OEM number 3596773M92, 57" Long, Tangential with Spacer, (Item #: 150998) $32.50

Cable - Hand Brake - For Massey Ferguson tractor models 271, 281, 360 (s/n V39466-later), 362 (s/n V39466-later), 365 (s/n V39466-later), 375 (s/n V39466-later), 383 (s/n V39466-later), 390 (s/n V39466-later), 390T (s/n V39466-later), 393 (s/n V39466-later), 396 (s/n V39466-later), 398 (s/n V39466-later), 399 (s/n V39466-later), Replaces Massey Ferguson OEM number 3596775M92, Length: 63-1/2", (Item #: 162028) $30.10

Cable, Hand Brake - Left Hand - For Massey Ferguson tractor models 360 (s/n V39465-earlier), 375 (s/n V39465-earlier), 383 (s/n V39465-earlier), 390 (s/n V39465-earlier), 398 (s/n V39465-earlier), Replaces Massey Ferguson OEM number 3595763M91, 3595763M1, Fits left hand side, Length: 61-57/64", Outer cable length: 60-1/8", (Item #: 162026) $47.80

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $2.30

Intermediate Brake Disc - This Intermediate Brake Disc has a 8.976 inch outside diameter and a 4.960 inch inside diameter. Replaces OEM numbers K963647, K945755, 37H8180, 1860965M1, 1860965M2, 3613538M2, 15454600, 154.5460.0, 395.34.0112m 411040, 30359700 (Item #: 126977, Ref: 1860965M2) $16.00

Master Cylinder Repair Kit - For Massey Ferguson tractor models 340, 342, 350, 355, 360, 362, 365, 375, 382, 390, 390T (s/n SO8141-earlier), 398, 399, Replaces Massey Ferguson OEM number 1810936M91, (Item #: 173660) $26.40

Spring - Spring, actuator disc return for disc brakes on tractors, just over 1 inch long: MF154-4, MF184-4, MF235 orchard, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, to serial number V39466, MF375 to serial number V39466, MF383 to serial number V39466, MF390 to serial number V39466, MF398 to serial number V39466, MF399 to serial number V39466, MF670, MF690, MF698, MF699 Industrials: 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 50F Forklift: 4500, 6500. For the following tractors with cast iron axle: MF135, MF165, MF175, MF180 Industrials: 30, 31, 40, 50A. For 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50F, 6500, MF135, MF154-4, MF165, MF175, MF180, MF184-4, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, and more. Replaces 1853148M1. (Item #: 124547, Ref: C5NN2N320A) $1.80

Clutch

Carrier - Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Item #: 112309, Ref: 886727M4) $14.50

$Massey Ferguson 360 Clutch Alignment Tool - 1-1\8 inch x 21 and 1-5\8 inch x 25 Spline$
Clutch Alignment Tool - 1-1/8" x 21 and 1-5/8" x 25 Spline - For Massey Ferguson tractor models 20, 30, 40, 231, 231S, 240, 241, 241S, 243, 251XE, 253, 261, 263, 265S, 271, 271XE, 275, 281XE, 283, 285S, 290, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 396, 398, 399, 431, 451, 461, 471, 481, 491, 492, 533, 593, 596, 699, 2670, 2680, Replaces manufacturer number 8301145, Pilot Diameter: .670", 1st Spline: 1 1/8", 21 Spline, 2nd Spline: 1 5/8", 25 Spline, (Item #: 167411) $27.20

No
Picture
Clutch Disc - Clutch disc, 12 inch, 21 spline, 1-1/8 inch hub, no damper springs, organic lining. For split torque single clutch in tractors: MF360, MF362. For dual clutch in tractors: MF390, replaces 3597096M91, 3597670M91, 3599459M92, 3599460M92, 3610274M91, 3610274M92, 1693884M91. For MF360, MF362, MF390. (Item #: 149696, Ref: 3610274M92) $75.00

Clutch Disc, Remanufactured - For Massey Ferguson tractor models 231, 240, 251XE, 253, 261, 263, 265, 271, 281, 283, 285, 350, 355, 360, 362, 365, 375, 383, 390, 398, 451, 461, 471, 481, 533, 573, 583, 4225, 4233, 4235, 4240, 4325, 4335, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 21, Clutch Center: Spring, Clutch Type: 5 Pads, (Item #: 206729) $181.01

Clutch Disc, Remanufactured, 1693883V91 - For Massey Ferguson tractor models 231 (Engine s/n E12095 - later), 240, 241 (Engine s/n E12095 - later), 251XE, 253, 261, 263, 265, 271, 281, 283, 285, 350, 355, 360, 362, 365, 375, 383, 390, 398, 451, 461, 471, 481, 533, 573, 583, 4225, 4233, 4235, 4240, 4325, 4335, Replaces Massey Ferguson OEM number 1693883V91, 1693883M91, 3701008M91, 3697208M91, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 21, Clutch Center: Solid, Clutch Type: 5 or 6 Reg Pads, (Item #: 206731) $202.76

Clutch Disc, Remanufactured, 1693884M91 - For Massey Ferguson tractor models 231, 240, 251XE, 253, 261, 263, 265S, 271, 271X, 271XE, 281, 281X, 281XE, 283, 285S, 350, 355, 360, 362, 365, 375, 383, 390, 398, 451, 461, 471, 481, 533, 573, 583, 4215, 4220, 4225, 4233, 4235, 4240, 4325, 4335, Replaces Massey Ferguson OEM number 1693884M91, 048438T2, 3597096M91, 3597670M91, 3599459M92, 3599460M92, 3610274M91, 3610274M92, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 21, Clutch Center: Solid, Clutch Type: Woven, For a New version of this sku use Item #: 149696, (Item #: 206730) $120.01

Clutch Disc, Used - For Massey Ferguson tractor models 30, 35, 50, 65, 150, 178, 180, 235, 240, 245, 255, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 396, 398, 399, 670, 690, 698, 699, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 40E, 50E, 50H, 60H, Replaces Massey Ferguson OEM number 523552M1, 1862289M2, 1869665M1, 1870879M1, 190177M1, 514276M1, 521282M1, 533326M2, 1870074M1, 1672626M1, O.D: 5.05", I.D: 3.457", Internal teeth: 57, Sold Each, For a new version of this item use Item #: 114029, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460628) $7.01

Clutch Finger Kit - This Clutch Lever Kit contains (10) 376123X1 nuts, (3) 891827M1 pins, (3) 889910M1 springs, (3) 887898M1 levers, (3) 891826M1 pins, (3) 1853164M1 bolts. For tractor models 135, 148, 155, 158, 165, 168, 178, 185, 188, 230, 240, 250, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 570, 590, 595, 675, 690, 698, 698T, 699. Used on 10 and 12 inch Double Clutch. (Item #: 173290, Ref: VPG6001) $34.70

Clutch Kit, 12 inch - Our new 12 inch double clutch kit contains: 12 inch, 25 spline double pressure plate assembly (3599463M92); 12 inch, 21 spline, rigid drive disc (3597670M91); new pilot (C5NN7600A) and release (83914247) bearings, and clutch alignment tool. For tractor models 20D, 20F, 231, 240P, 240S, 253, 261, 263, 265S, 271, 281, 285S, 30E, 360, 362, 365, 375, 383, 390, 390T, 40E. (Item #: 112312, Ref: 1212-1440) $455.00

Clutch Kit, Remanufactured, 3700167M91 - For Massey Ferguson tractor models 231, 240, 243, 253, 261, 263, 265S, 350, 355, 360, 362, 365, 375, 383, 390, Replaces Massey Ferguson OEM number 3700167M91, 3697162M91, 3701007M92, 3701003M92, 3701003M91, M3701003K1, For Release Bearing use Item #: 116891, (Item #: 210040) $610.74

Clutch Release Bearing Carrier Spring - This Clutch Release Bearing Carrier Spring is used on many Massey Ferguson models. It is 2-1/8 Inch Overall Length. It replaces 1867690M1, 193334M1, 509230M2, 180451M1, 509230M2, 180451M2, 1867690M2. (Item #: 128535, Ref: 1867690M2) $4.30

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.10

Massey Ferguson 360 Independent PTO Clutch Pack Parts

Independent PTO Clutch Pack Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 375, 382, 390, 390T, 398, 399, 40, 40B, 40D, 40E, MH44, 50, MH50, 500, 50A, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 675, 690, 698, 698T, 699, 85, 88, F40, FE35, Super 90, TE20. Replaces OEM part number 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate Assembly, Remanufactured, 1867428M91 - For Massey Ferguson tractor models 253, 263, 350, 355, 360, 362, 375, 383, 398, 670, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 30H, Replaces Massey Ferguson OEM number 1867428M91, 1867431M91, 3596265M91, 3599491M91, 3599491M92, 3610269M91, 3610269M92, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-5/8", Pressure Plate Spline: 25, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206864) $310.01

Pressure Plate Assembly, Remanufactured, 1867433M91 - For Massey Ferguson tractor models 265, 270, 275, 285, 290, 350, 355, 360, 375 (Engine s/n B11043 - earlier), 390, 690, Compatible with Massey Ferguson Construction and industrial models 40, 50, Replaces Massey Ferguson OEM number 1867433M91, 1867436M91, 3599494M91, 3599496M92, 3620404M91, 887867M91, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Hub: 1-5/8", Pressure Plate Spline: 25, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206876) $284.50

Pressure Plate Assembly Split Torque - Used on some of the following Massey Ferguson models: 165 UK, 175 UK, 265S, 270, 275, 285S, 290, 350 Indust/Const, 355, 360, 375, 390, 40E Indust/Const, 50E Indust/Const, 690. A split torque pressure plate has splines in the center, but no free moving captive disc. This is a 12 inch pressure plate with 25 spline, 1 5/8 inch center hub. Replaces 1867436M91, 1867436M92, 3599 496M91, 3599496M91, 3599496M93, 3599496M92, 1300011410, 130 0011 410 (Item #: 169865, Ref: 1867436M91) $389.00

PTO Clutch Disc, Remanufactured, 3900378M91 - For Massey Ferguson tractor models 231 (Engine s/n E12095 - later), 240, 250, 251XE, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 350, 355, 360, 362, 375, 383, 390, 398, 451, 471, 481, 533, 573, 583, 2605, Replaces Massey Ferguson OEM number 3900378M91, 1867386M91, 1486544M91, 1865836M91, 3478359M91, Clutch Size: 10", Clutch Hub: 1-5/8", Clutch Spline: 25, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206725) $96.01

PTO Clutch Plate - Clutch Plate, external teeth, for independent PTO, 7 required. For tractors: MF240, MF265, serial number 9A349239 and up 2-speed only, MF270, MF275 serial number 9A349239 and up 2-speed only, MF290, MF298, MF360, MF375, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699 Industrials: 30E, 40E, 50E. For 50E, MF231, MF270, MF283, MF290, MF298, MF4800, MF4840, MF4880, MF4900, MF670, MF690, MF698, MF699. (Item #: 114030, Ref: 1870860M1) $5.20

Release Bearing - Release Bearing for Single and Dual Clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 350, 352, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 40, 40B, 40D, 40E, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 690, 698, 698T, 699, F40, TO35. Replaces original part numbers 195508M1, 892862M1, 892862M2 and 256179M1. (Item #: 112189, Ref: N1585) $23.20

Cooling System

Fan Blade-Front - 15-3/8 inches, square bolt pattern. For tractor models 135 UK (serial number 152UA5275>), 240, 250, 360, IND. 20D, 20E, 20F, 30E, 30H, 40E (2WD). (40005S) (Item #: 172313, Ref: 1884777M1) $13.30

Radiator - For 360, 362. Radiator. Overall height: 525mm, Overall width: 490mm, Thickness: 85mm. Replaces: 25352M97, 25352M98 (Item #: 178991, Ref: 25352M98) $800.00

Radiator Hose, Lower - For tractor models MF360. For F40, MF135, MF150, MF35, TO20, TO30, TO35. (Item #: 159300, Ref: 1694711M3) $11.80

Radiator Hose - Upper - For Massey Ferguson tractor models 340, 342, 350, 353, 355, 360, 363, 364, Replaces Massey Ferguson OEM number 1696559M1, 1696559V1, (Item #: 164646) $14.40

Thermostat,180 Degree - For: F40, FE35, TEA20, 150, Deluxe, TO35, 1080, 1085, 1100, 1105, 1130, 1135, 130, 135, 148, 150, 154, 1545, 165, 168, 175, 187, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20E, 2135, 2200, 2244, 230, 235, 240, 245, 250, 2500, 253, 254, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 30H, 320, 35, 350, 35X, 360, 362, 40, 40E, 4500, 470, 4830FC. Replaces 1446165V91, 1446127M1, 1446165M1, 1446127V91, 2485648, 1894961M1, 2485659, 325505M2, 32550, 1446165M91, 1446127M91, 2485666, 40085, 826306M1, 828139M1, 886000M1 (Item #: 110084, Ref: 1446165M91) $8.00

Water Pump Gasket - This Gasket is for 3641250M91 and other water pump backplates. Fits models 1004, 1014, 1080, 135, 148, 165, 168, 174, 175, 178, 184, 185 BACKHOE, 188, 194, 230, 240, 250 SKID STEER LOADER, 254, 255, 265, 273, 274, 275, 283, 284, 285, 290, 293, 294, 340, 342, 35, 350 INDUST/CONST, 352, 355, 360, 362, 372, 373, 374, 375, 377, 383, 384, 387, 390, 393, 394, 397, 550, 560 COMBINE, 565 COMBINE, 575 SKID STEER LOADER, 590, 595, 675, 690, 698. Replaces 3638177M1, 4224122M1, 4224387M1, 731165M1. (Item #: 163938, Ref: 4224387M1) $2.10

Water Pump Gasket - Used on Perkins 144 and 152 cubic inch, three cylinder engines. Replaces 957E8507, 72080255, 0941183, 731275M1, 4222931M1, 36862532 (Item #: 155091, Ref: 4222931M1) $1.80

Water Pump Kit - This water pump repair kit fits the following tractor models: 2500, 20C, 20E, 20F, 203, 205, 2135, 30B, 30E, 30H, 40E, 135, 135UK, 148, 150, 154-4, 154-4S, 230, 231, 235, 240, 240P, 245, 250, 253, 254-4, 263, 340, 342, 350, 353, 353LX, 360 all with Perkins engines. It services pumps: 739527M91, 747542M91, and 742558M91. Replaces 731774M91 (Item #: 191242, Ref: 731774M91) $25.10

Water Pump - With Pulley - This new water pump includes pulley part number 735034M1 with 3.125 inch hub diameter and a 1 5/8 inch pilot. The pulley has a square fan pulley mounting pattern. For tractor models 35, 50, 135, 150, 203, 205, 235, 245, 240, 20, 20C, 20E, 20F, 2135, 230, 231, 240, 245, 253, 360, 154-4, 30B, 30D, 30E, 30H, 40E, 2500, 254-4 all with PERKINS AD3.152 or AG3.152 engines. This is a new water pump. Replaces 3641338M91, 3641823M91, 37711330, 739527M91, 747542M91, U5MW0023, 41312487, 4132159, 735034M1, 735034V1, 747542M9. (Item #: 150185, Ref: 3641823M91) $40.00

Drive Train

Massey Ferguson 360 12 Speed Synchromesh Transmission Parts

12 Speed Synchromesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Massey Ferguson 360 8 Speed Constant Mesh Transmission Parts

8 Speed Constant Mesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Massey Ferguson 360 8 Speed Synchromesh Transmission Parts

8 Speed Synchromesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $24.20

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $27.10

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.00

Bearing, Mainshaft - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 serial number up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Item #: 173116, Ref: 338552X1) $44.80

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $9.60

Bearing, Outer Input Housing - 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Item #: 165439, Ref: 886668M1) $12.00

Bearing, Pinion Pilot - For tractor models 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11 x 38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11 x 38 differential, 590 with 11 x 38 differential, 65, 675, 690 with 11 x 38 differential, 765, FE35. Replaces 191250M1, 191250V1, 196098M1 (Item #: 117942, Ref: 191250M1) $30.90

Carrier Assembly - For Epicyclic Pinion Gear. Models: 135, 150, (155, 158, 165 with Multi Power), 175, 20, 202, 203, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, (265, 275, 285, 290 with Multi Power), 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 35 serial number 365360->, 360, 362, 375, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, (550, 565, 575, 590 with Multi Power), 65, 6500, 765 serial number 609714->, FE135 Coventry. (Item #: 161568, Ref: 897711M93) $347.01

Countershaft - 8 speed transmission, 17/20 spline, 15 tooth, 12.250 inches long. For tractor models 1085, 135, 150, 1505, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 165986, Ref: 906472M2) $54.00

Coupling, Rear Drive Shaft - 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Item #: 160154, Ref: 1680189M1) $36.20

Crown Wheel and Pinion Set - Ring has 38 teeth, shaft has 11 teeth, 10 spline. Approximately 9 7/8 inch- 9 15/16 inch total length. For tractor models 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 200 Series, 20E, 20F, 2200, 235, 24, 240 serial number N01001-A20286, 245, 25, 250, 2500, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275 UK, 281, 282, 285S, 290 UK, 30, 302, 304, 30E, 30H, 31, 3165, 360, 362, 365, 375, 390, 399, 40, 40E, 4500, 50, 50E, 50H, 50HX, 60H, 65, 6500, 670, 6800H. (Item #: 125330, Ref: 1664255M92) $332.00

Detent Plunger - This Detent Plunger is used on; 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces original part numbers 180418M1 and 180418M2. (Item #: 169495, Ref: 180418M2) $4.60

Detent Plunger Spring - This Detent Plunger Spring is used with 180418M2 Detent Plunger. It is used on 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces 180417M1, 191221M1, 191221M2 (Item #: 165970, Ref: 180417M1) $1.90

Differential Bearing and Cup RH - Bearing and cup set Fits multiple Massey Ferguson Models. (159x108x21mm) Replaces 1850849M91, 1850909M91, 185251M1, 185252M1, 185252V1, 3039248M1, 3039249M1 (Item #: 150360, Ref: 185251M1) $146.00

Differential Coupling Cap - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 6500H, 670, 6800H, 690, 698, 699, Super 90. (Item #: 172335, Ref: 898712M2) $86.00

Differential Cover - For tractor models 135, 150, 165, 175, 180, 20E, 20F, 2200, 235, 245, 250, 2500, 253, 255, 265, 272, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 670, 690. Replaces 894781M3, 894780M92. (Item #: 173126, Ref: 3759150M1) $199.00

Differential Cross - sed with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson 894302M1, 6211999M1, 894302M2, 2746135M1, 2746135M2, 181276M1, 588731M1 (Item #: 113612, Ref: 894302M3) $14.00

Differential Gear - The dimensions of this gear in inches are: A - 1 15/16, B - 4 1/2, C - 2 3/4, D - 15/16. It has 14 Teeth, and 39 Splines. Verify measurements before ordering. Used on Massey Ferguson models: 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160 Replaces 885517M1, 885518M1, 885518M4, 885518M2, 885518M5 (Item #: 166930, Ref: 885518M1) $56.00

Differential Lock Fork - For tractor models 1080, 135, 165, 175, 180, 20F, 220, 235, 24, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 320, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 173511, Ref: 906807M1) $66.00

Differential Lock Fork Coupler - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 172334, Ref: 897003M3) $81.00

Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 3.32 inch diameter. For tractor models 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160. Replaces 2746322M1, 897725M1 (Item #: 166937, Ref: 2746322M1) $24.70

Differential Pinion Gear Thrust Washer - Used with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson part numbers 181277M1, 514958M1, 885520M1, 3387281V1, 3387281M1 (Item #: 166940, Ref: 3387281M1) $1.30

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 3/16 outside diameter and 0.053 inches thick. Used on 1080, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20C, 20D, 20F, 2135, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285, 290, 298, 30B, 30D, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 372, 375, 382, 390, 390T, 398, 399, 50, 550, 565, 575, 590, 595, 65, 675, 690, 698, 698T, 699, 85, 88, Super 90, TE20, TEA20, TED20, TEF20, TO20 Replaces OEM number 181247M1. (Item #: 173021, Ref: 181247M1) $11.50

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $8.40

Dipstick, Differential Oil Level - Verify length of 6 1/8 inches. For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30b, 30D, 30E, 360, 362, 375, 383, 390, 390T, 393, 398, 40, 40B, 40E, 50C, 50D, 50E, FE135 Coventry. Replaces 1665962M91, 1665962V91, 828810M91 (Item #: 163463, Ref: 1665962M91) $5.10

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.20

Drive Shaft Retainer Housing - For NON Multipower transmission. Fits 8 Speed transmission in: 135, 150, 165, 235, 240, 245, 250, 255, 265, 275, 383. Fits 8 or 12 speed transmission in: 360, 362, 375, 390, 390T, 398, 399. (Item #: 151853, Ref: 1693833M92) $98.00

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $22.30

Gear, 1st - This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS/DIESEL, 282 MEX. (Item #: 151828, Ref: 1682688M1) $80.00

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $25.90

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $27.10

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $2.50

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $75.00

Gear Shift Boot - Inside diameter top = 5/8 inch, inside diameter bottom = 1-11/16 inch, height 4-3/8 inch. For tractor models 35, 50, 65, 135, 150, 165, 175, 240, 250, 253, 255, 265, 270, 275, (283 8/1993 and up), 290, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698. Replaces 1694127M1, 1694127M3, 1694127M4. (Item #: 151854, Ref: 1694127M1) $6.30

Gear Shift Boot - For tractor models 135, 135UK, 150, 165, 175, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 283UK, 285, 290, 298, 360, (375, 383, 390, 393, 396> serial number B06171), IND 20, 20C, 20D, 30, 31. Top hole 5/8 inch, bottom hole 2 inches. Replaces K929631. (Item #: 124263, Ref: 1678565M2) $3.00

Gear Shift Cup and Lock Ring - This Gear Shift Cup (827690M1) and Lock Ring (827211M1) is used on Massey Ferguson 135, 135 UK, 231, 240, 250, 253, 360, 362, 375, 383, 390, 393, 396, 20D, 20E, 283 UK, 30E, 390T. Replaces 827690M1, 827211M1 (Item #: 173296, Ref: 827690M1) $33.20

Gearshift, Retainer Lock - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 172683, Ref: 1860761M1) $25.00

Gearshift Selector - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E, 50H. (Item #: 173128, Ref: 1862868M2) $36.80

Gearshift Stop Plate - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 173117, Ref: 1860764M3) $4.50

Inner Axle Bearing - This Bearing measures 66.7mm (2.626 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces 3955/394A, C9NN4874A, 1-31-741-001, 106639, 8181397, 163044, 81818397, 81826019181, 82958861, C5NN4874B, C5NN4N221B, 86503131, 81818406, 82007077, 1079649M1, 884791M92, 831488M1, 834049M1, 1079403M1, 1851392M91, 1851392M1. Verify OEM number or measurements before ordered. Many model tractors have more than one rear axle configuration. (Item #: 185648, Ref: C9NN4874A) $36.50

Inner Axle Bearing - Measuring 1.024 inch inner width, 3.244 inch inside diameter, 4.941 inch outside diameter, this bearing is used on Massey Ferguson 1080, 1085, 135, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 265, 270, 275, 282, 283, 285, 290, 292, 295, 296, 297, 298, 299, 30, 30B, 30D, 30E, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 410, 420, 440, 445, 460, 465, 475, 492, 50, 50A, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 670, 675, 690, 698, 698T, 699. Verify measurements or OEM number. Many of the listed models have more than one rear axle configuration. Replace Massey Ferguson part numbers 1881931V91, 1881931M91, 894776M1, 588237M1, 27687, 27620 (Item #: 173235, Ref: 1881931M91) $59.00

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $13.20

Layshaft Housing Gasket - This Layshaft Housing Gasket, also known as Bearing Housing Cap Gasket, is used on some 6 speed, Multi-power and 12 speed Syncromesh transmissions. It replaces OEM part numbers 1004633M1, 181237M1 (Item #: 169496, Ref: 181237M1) $1.50

Main Input Shaft Inner Bearing - This bearing is widely used in 12 Speed Synchromesh, Multi Power, 8 Speed Constant Mesh, and 8 speed Synchromesh transmissions. It measures 1 inch inside diameter, 1 5/16 inchs outside diameter, and is 1 inch long. Replaces Massey Ferguson part numbers 2700273V1, 2700273M1 (Item #: 187378, Ref: 2700273M1) $10.80

Mainshaft - 8 speed transmission, 18 spline, 13.50 inches long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Item #: 125332, Ref: 1687643M1) $111.00

Mainshaft, Heavy Duty, 8 Speed Trans. - 22 tooth, 18 spline, 13.375 inches long. Replaces 1870151M1, 1682448M1. For tractor models 1080, 1085, 135, 148, 155, 158, 165, 168, 175, 180, 185, 188, 240, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 50E, 50H, 550, 565, 575, 590. Replaces 1682448M1, 1870151M1. (Item #: 125331, Ref: 1687642M1) $98.00

Needle Bearing - Measures 1 1/4 inch inside diameter, 1-5/8 outside diameter, 3/4 inch wide. Replaces 1677724M1, 196076M1, 832775M (Item #: 180488, Ref: 196076M1) $26.00

Outer Cover Seal - Measuring 4.00 inches outside diameter x 2.875 inches inside diameter, 0.375 inches wide, this is the outer seal on cover. Replaces 894736M4, 834220M1, 894763M5, 894763M2, 894763M3, 894763M4, 3699800M1, 3699800M2, 73119909, 70657582, 0657582, 657582, 6V8172, 2X5156, 8T6917, 1B4327, 1D4327, 304816C91, 290811R92, 71855C1, 270380C91, 643986C91, B132704AB (Item #: 172312, Ref: 834220M1) $17.30

Pinion Jam Nut, New Style - Used on Massey Ferguson models: 1004, 1004T, 1200, 1250, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US Built, 240, 245, 250, 253, 255, 260, 261, 265, 27, 275, 282, 282 US Built, 283, 285 (FR), 290, 290 US Built, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. This new style nut replaces 532956M1, 3596252M1 (Item #: 173348, Ref: 532956M1) $10.90

Planetary Cover Plate, Front - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Item #: 173500, Ref: 180408M2) $17.30

Planetary Cover Plate, Rear - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 180666, Ref: 184012M4) $20.40

Planetary Pinion Gear Shaft - The end of this shaft is threaded with a through hole for a Roll Pin. It measures 1.03 inches in diameter and is 3.26 inches long. Replaces Massey Ferguson part number 1864869M1. Used on Massey Ferguson models: 2500, 4500, 6500, 20E, 20F, 2200, 24, 25, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E. 50F, 50H, 60, 60H, 6500H, 6800H, 135, 150, 165, 165UK, 175, 175UK, 178, 180, 235, 240, 245, 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275UK, 281, 282, 283, 290, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 670, 690 (Item #: 170392, Ref: 1864869M1) $22.70

Planetary Ring Gear Gasket - Two of these gaskets are used per planetary ring gear. Replaces Massey Ferguson part numbers 184182M3, 191141M1 (Item #: 128513, Ref: 191141M1) $7.80

Planetary Ring Gear Thrust Washer - Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref: 1866542M1) $3.60

Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref: 180446M1) $17.90

PTO Coupler - For Massey Ferguson tractor models 133, 135 (457632), 140, 148, 168 (257923), 230, 240, 253, 265, 275, 290, 340, 350, 355, 360, 362 (All With), Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 50, 50C, Replaces Massey Ferguson OEM number 3599630M91, (Item #: 125399) $44.10

PTO Input Shaft - For Massey Ferguson tractor models 230, 231, 240, 243, 250, 253, 255, 261, 263, 265, 275, 282, 283, 290, 340, 342, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 590, 4225, 4235, 4245, 4255, 4265, 4315, 4325, 4335, 4345, 4355, Replaces Massey Ferguson OEM number 1671705M1, 1671704M91, 1671705M2, 1671704M1, Replaces Landini OEM number 1860011M1, 1671705M1, 1671704M91, 16 Teeth, 25 Spline, (Item #: 166868) $190.00

No
Picture
PTO Lift Pivot Shaft - For Massey Ferguson tractor models F40, TO35, 35, 35 (France), 35X (France), 50, 50 (Harris and Massey), 65, 135, 135 (UK), 150, 165, 165 (UK), 175, 175 (UK), 178 (UK), 180, 230, 231, 231S, 235, 240, 240 (S, Turkey), 245, 250, 255, 265, 265S (Turkey), 270, 271X, 271XE, 275, 275 (UK), 281, 281X, 281XE, 282, 283, 283 (UK), 283 (Brazil), 285, 285S (Turkey), 290, 290 (UK), 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 898304M91, (Item #: 176229) $7.30

Rear Axle Housing Carrier Plate O-Ring - Measuring 317.5mm inside diameter by 2.62mm thick, this o-ring is used on Massey Ferguson 1085, 1200, 1250, 135, 152, 155, 158, 165, 168, 175, 180, 185, 188, 20C, 20D, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 415, 425, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. Replaces OEM numbers 1860838M1, 1860838V1, 1860838M2 (Item #: 173237, Ref: 1860838M1) $4.80

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $22.40

Reverse Idler Gear - For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699, Replaces Massey Ferguson OEM number 1688127M1, 14/21 Teeth, (Item #: 165953) $26.10

No
Picture
Seal - Front Axle Hub Seal. For tractors: MF250 with 6.00 x 10 rim, MF253 with 179MM high axle, MF270, MF282, MF283 except Brazil, MF290, MF298, MF360, MF375, MF383, MF390, MF398, MF399, MF670, MF690, MF698, MF699 Industrials: 20D with fixed axle, 30E, 40E. (Item #: 173176, Ref: 897702M1) $6.70

Seal, PTO Pinion Shaft Retainer - This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Item #: 128472, Ref: 1860867M3) $5.70

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $28.70

Shift Lever Locking Pin - This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Item #: 183009, Ref: 1678440M1) $1.10

Shift Rail, 2nd and 4th - Shift Rail, 2nd and 4th. Replaces 180438M2 For the following tractors: 135, 138, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11x38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11x38 differential, 590 with 11x38 differential, 65, 675, 690 with 11x38 differential, 765, FE35. (Item #: 172896, Ref: 1678866M1) $37.70

Transmission Countershaft - For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699, Replaces Massey Ferguson OEM number 1677827M3, Fits tractors with 12 speed Synchromesh Transmission, (Item #: 165943) $131.00

Transmission Rear Axle Gasket - This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $7.80

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.00

Electrical System

Alternator - 12 volt, 55 amp. For tractor models (154 1986-89), (184 1986-89 with 236 dsl), (194, 194-4 1993 on), (240 1983-99 with 152 dsl), (243 1999-00), (245 1977-82 with 152 dsl), (250 1983-86 with 152 dsl), (253 1988-99 with 152 dsl), (254 1982-87 with 152 dsl), (255 1977-82 with 236 dsl), (260, 263T 1993 on), (300 1987-on), (360 1986-92 with 152 dsl), (364 1989-93 with 152 dsl), (365 1990-96), (373 1990-96), (374 1989-99 with 236 dsl), (375 1986-98 with 236 dsl), (377 1987-96), (383 1986-89 with 248 dsl), (384 1989-92 with 236 dsl), (387 1987-92), (390 1993-98 with 248 dsl), (390 1987-92 with 248 dsl), (390T 1989-98 with 236 dsl), (393 1992-94 with 236 dsl), (394 1989-93 with 248 dsl), (396 1992-98), (397, 397T 1989-96), (398 1987-97 with 236 dsl), (399 1987-98 with 354 dsl), (699 1984-86 with 354 dsl). Replaces 24157. (Item #: 117400, Ref: ALU0024) $122.00

Alternator - 12 volt, 65 amp. For tractor models (240 1983-99 with 152 dsl), (360 1986-92 with 152 dsl), (362 1990-92 with 236 dsl), (365 1990-96), (368 1986-92 with 236 dsl), (375 1986-98 with 236 dsl), (383 1986-98 with 248 dsl), (390 1987-98 with 248 dsl), (390T 1989-98 with 236 dsl), (393 1995-98 with 236 dsl), (396 1992-98), (398 1987-97), (399 1987-92 with 354 dsl), (4225, 4233, 4235, 4243, 4245, 4253, 4255, 4260, 4263, 4270 1997-00 with 1004.4 dsl). Replaces 24199, 24294. (Item #: 112389, Ref: ALU0010) $119.00

Ignition Switch - Switch, starter and heat, 6 prongs, includes 2 keys. For tractor models 231, 240, 250, 282, 290, 360, 362, 383, (390T serial number up to B18009), 393, 3505, 3525, 20F, 30E, 30H, 40E, 50E, 50F, 50H, 50HX, 60H. Replaces 1446116M1, 1446116M91, 1874120M91, 1874120M93, 1874535M3, 1874535V3, 3387319M1, 34228, 3533928M91, 3536550M92, 3536550M93, 35670.1874120M91 (Item #: 111509, Ref: 3107556R92) $9.90

Oil Press Switch - Oil Pressure Switch. For tractors: MF154S, MF174S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF270, MF274-4, MF282, MF283 except Brazil, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF3050 to serial number V173002, MF 3060 to serial number V173002, MF 3070 to serial number V173002, MF 3090 to serial number V173002, MF3505, MF3525, MF3545, MF3630, MF3650 Industrials: 20D, 30E, 40E, 50E. Replaces 1423895M91, 1877721M92. For 750, 760, 850, 860. (Item #: 151010, Ref: 3599307M91) $8.30

Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models (174 1986-90 with Perkins 4-236 dsl), (184 1986-89 with Perkins 4-236 dsl), (194 from 1993 up), (194-4 1979-92), (253 1988-99 with Perkins AD2-152 dsl), (254 1982-87 with Perkins AD2-152 dsl), (274, 274-4 1982-86 with Perkins AD4-236 dsl), (294, 294-4 1982-86 with Perkins 6-358 dsl), (360 1986-92 with Perkins 3-152 dsl), (373 1990-96), (374 1989-99 with Perkins 4-236 dsl), (377 1987-96), (384 1989-92 with Perkins 4-236 dsl), (394 1989-93 with Perkins 4-248 dsl), (397, 397T 1989-96). Replaces 26358, 27519. (Item #: 112303, Ref: SLU0017) $165.00

Starter Assembly - 12 volt, diesel, 10 teeth, 2.7KW. For tractor models MF30, MF50, MF165, MF174, MF174C, MF194, MF265, MF270 MF275, MF285, MF290, 6500, 7500, 8500. Replaces Lucas, 26413, 27411, 27433, 27539, 26410 LRS190R, 26412, 26412R, LRS190, 27432, 26264, 26154, 26264R. 1680065R3, 1680065M3, 1680065M1, 26264R, 26412R, 27432R, 3.93E+07, 26412, 26220, 3597371M2, 3597426M3, 3597426M2, 968856M1, LRS190R, 3930505R1, 1868285M3. Left side mount. (Item #: 157974) $147.00

Starter, RH Mount - New Lucas Style Starter Assembly 5 inch with solenoid, cold climate. For tractors: MF231, MF240, MF250, MF253, MF360 Industrials: 20D, 20E, 30H, 40E. Replaces 1691805M2, 1868283M5. Can replace 3597371M2, 1680065M3 and 3597426M2 Hitachi Starters on above models. Replaces Lucas 26365, 27546, 26411, 26344, 27540, 26273, 27571, 27584 (Item #: 156138, Ref: 3763363M91) $190.00

Switch - Switch, neutral safety, has blade type terminals. For tractors: MF25, MF130, MF231, MF240*, MF250*, MF270, MF290, MF298*, MF670, MF690, MF698, MF3505, MF3525, MF3545 industrials: 20D, 30E, 40E*. *Optional with 1679223M2. Also used for differential lock s (Item #: 164579, Ref: 3381094M1) $22.00

Switch With Keys - Switch, starter and heat, 6 prongs, includes 2 keys. For tractors: MF231, MF240, MF250, MF253, MF270, MF282, MF290, MF298, MF360, MF375, MF383, MF390, MF398, MF3050, MF3060, MF3070, MF3090, MF3505, MF3525, MF3545, MF3630, MF3650, MF3680 industrials: 20D 1874535M3 (Item #: 111509, Ref: 3107556R92) $9.90

Engine Bearings

No
Picture
IPTO Clutch Kit - For Massey Ferguson tractor models 255 (dual speed), 265 (dual speed), 270, 275 (dual speed), 290, 298, 360, 375, 390, 398, 399, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 30E, 40E, 50E, Replaces Massey Ferguson OEM number 1672626M1, 1870859M1, 514551M1, 1870858M1, 1870860M1, Kit Includes: (7) Frictions Discs, (7) Separator Plates, (2) Piston Rings, and (2) Sealing Rings, (Item #: 177048) $384.00

PTO Housing Retainer - For Massey Ferguson tractor models 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 393, 398, 399, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 532880M1, Use with PTO seal 834216M1, Rear PTO Housing Retainer, For PTO seal use Item #: 107013, (Item #: 151852) $53.00

No
Picture
PTO Hydraulic Clutch Seal, Inner - For Massey Ferguson tractor models 135 (UK), 165 (UK), 240, 253, 263, 265 (s/n 9A349239-later), 270, 275 (s/n 9A349239-later), 290, 298, 360, 362, 365 (s/n B18009-earlier), 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 40E, 50E, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 1870858M1, Replaces manufacturer number VPH5201, O.D.: 2.441", Width: .151", (Item #: 173691) $6.30

PTO Oil Seal - For Massey Ferguson tractor models 135, 148, 155, 165, 168, 185, 188, 230, 240, 250, 265, 275, 285 (With A4.248 Engine), 290, 340, 342, 350, 355, 360, 362, 365, 375, 550, 565, 575 (UK Model), 590 (UK Model), Replaces Massey Ferguson OEM number 1860011M1, VPH1407, 360, 362, 365, 375, 550, 565, 575, 590, (Item #: 152374) $3.80

No
Picture
PTO Shaft Bushing - For Massey Ferguson tractor models 165 (UK), 230, 231, 235, 240 (s/n: A20286-earlier), 240 (S), 240P, 245 (s/n: 9A349239-earlier), 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 281, 282, 283, 290, 360, 365 (s/n: B18009-earlier), 375, 383, 390, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 40, 40B, 40E, Replaces Massey Ferguson OEM number 532883M1, (Item #: 174198) $20.40

No
Picture
Rod Bearing Set - For Massey Ferguson tractor models 20, 35, 40, 50, 135, 150, 154-4, 230 (s/n 9A349239-earlier), 231S, 235, 240 (s/n N01001-earlier), 241, 245 (s/n 9A349239-earlier), 250, 251XE, 253, 254-4 (s/n 22210641-earlier), 254-4 (s/n 22210641-later), 263, 360, 451, 2135, 2200, 3315, 3330, 3340, 3350, 3355, Compatible with Massey Ferguson Construction and industrial models 20F, 30B, 30D Replaces Massey Ferguson OEM number 737071M91, , Compatible with Massey Harris tractor models 50, Replaces OEM number 31131172, Set of 3, 6 Halves, (Item #: 166853) $9.80

Sealing Ring - For Massey Ferguson tractor models 20, 30, 31, 35, 35X, 135, 148, 150, 165, 175, 178, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 298, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 420, 440, 492, 550, 565, 575, 590, 595, 670, 675, 690, 698, 699, Replaces Massey Ferguson OEM number 3699909M1, 907315M2, 3609471M1, 3699909V1, 186198M1, 2" O.D. x 3/32", (Item #: 165441) $6.90

Engine Gaskets

Lip Seal Housing Gasket - For Massey Ferguson tractor models 135, 148, 150, 154-4, 155, 158, 165, 203, 205, 230, 235, 240, 245, 250, 253, 254, 254-4, 255, 260, 302, 304, 342, 350, 353, 360, 363, 550, 560, Replaces Massey Ferguson OEM number 3641894M1, 741378M1, 33826111, (Item #: 169750) $23.75

Rear Head Cover Gasket - For Massey Ferguson tractor models 20, 30, 35, 35X, 40, 50, 50A, 65, 80, 135, 150, 154, 154-4, 165, 230, 231, 235, 240, 245, 250, 254, 254-4, 255, 302, 304, 360, 364S, 399, 699, 1100, 1105, 1130, 1135, 2135, 2200, 2640, 3090, 3165, 3505, 3525, 3545, 3630, 3650, Compatible with Massey Ferguson Combine (s) 300, 510, 550, 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 20, 40, 80, 203, 2200, 2500, 4500 Replaces Massey Ferguson OEM number 4222004M1, 731128M1, , Compatible with Oliver tractor models 1850 Replaces Oliver OEM number 159070A, , Compatible with White tractor models 2-85, 2-88, 2-105, 2-110, Replaces White OEM number 159070A, Replaces Perkins OEM number 36851416, 490485, (Item #: 113596) $14.00

Timing Case to Block Gasket - Gasket for the timing case to block for tractor models Massey Ferguson 35, 135, 148, 230, 240, 250, 254, 254S, 255, 350, 353, 550, 363, and 253 with Engines A3.152 AD3.152 AT3.152 AT3.152.4 Replaces 36814119. Priced each. Price shown is for 2, sold only in multiples of 2 items. (Item #: 168423, Ref: 734238M1) $12.60

Timing Cover Gasket - Used with 3637397M91 timing Cover. Replaces 4224397M1, 36813136, 734661M1 (Item #: 168135, Ref: 734661M1) $8.50

Valve Cover Gasket - This Valve Cover Gasket is used on Tractors: 135, 150, 230, 235, 240, 245, 250, 253, 360 and Industrial Series 20, 203, 205, 2135, 2200, 154-4, 20C, 2500, 254-4, 30B, 30D, MF 40 All with Perkins 152 cubic inch gas or diesel engines. Replaces original part numbers 36811115, 735057M1, 033 - 7689, 2130099, 28108, 72080111 (Item #: 158290, Ref: 735057M1) $5.50

Engine Parts

Camshaft - Replaces 31415261. For the following Models with A3.152, AD3.152 or AG3.152 engines: 135, 150, 154-4, 1545, 20, 20C, 20D, 20F, 200, 203, 205, 2135, 2200, 2244, 230, 231, 235, 240, 2400, 245, 250, 2500, 253, 254-4, 30B, 30D, 30E, 30H, 35, 350, 360, 40, 40E, 4830FC, 50, 5500, 5830, 5830FC, 5860, 5870, 6030C, 7830, 7830C, 8830 (Item #: 173283, Ref: 733507M1) $127.00

Connecting Rod - Verify casting number 31337220. For tractor models (365, 65 all engine serial number 2939035 not ending with DL), (165, 255, 30, 300, 302, 3165, 356, 40B, 50, ALL engine serial number 29C1085), 304 engine serial number 2939036-29C1084, (20C, 235, 245, 30B ALL engine serial number ending in DS), 250 engine serial number ending in DSL, 40 Industrial with AD3.152 and AT3.152 engines, (135, 148, 20B, 20D, 20E, 20F, 230, 240, 250, 253, 254, 254S, 255, 30E, 30H, 350, 353, 355, 360, 363, 40E, 550 ALL with AD3.152 and AT3.152 engines), (155, 158, 165, 260, 560, 65, 765 ALL with AD4.203 engine). 8.875 Inch CENTER TO CENTER (IF NEEDING 9 Inch CENTER TO CENTER, ORDER NUMBER ZZ90011). Replaces: M7BJ0014, VPB6001, 31337220, 3637392M1, 3637392M91, 736386M91, 740596M91, 747008M91, 84774. (Item #: 123607, Ref: ZZ90010) $72.00

Connecting Rod Bolt and Nut Assembly - Used on Perkins Engines, this Bolt and Nut Assembly replaces OEM numbers 84264589, 370664S, 382885S2, 34447ES2B, 385279S2, 390655S2, 81803991, 957E6215, 957E6212, 957E-6215, 0095250, 1476245, 1476245X1, 375756X1, 355756X1, 33221327, 3639947M1, 33221319 (Item #: 183833, Ref: 957E6215) $3.90

Crankshaft - This new crankshaft is for a Perkins engine using aLip Type Seal in AD3.152 and G3.152 engines, gas and diesel. All with casting number 31312701. Fits 135, 230, 231, 240, 245, 250, 253, 360, 20, 20C, 40, 2135, 2200. (Item #: 102113, Ref: 742827M91) $338.00

Crankshaft and Bearing Kit - Crankshaft Kit comes with standard main bearings, rod bearings and thrust washers. For Perkins AG3-152 Gas and AD3-152 Diesel Engines using 1 piece lip-type rear seal, keyed nose. Replaces U5BG0027, 742827M91, 3637399M91, 3637410M91. Does not come with weights. Fits 135, 230, 231, 240, 245, 250, 253, 360. INDUSTRIALS: 20, 20C, 40, 2135, 2200. (Item #: 185737, Ref: 3641825M91) $383.00

Crankshaft Weight Washer - This Crankshaft Weight Washer is used on 35, 50, 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E. It replaces 31731515, 31731516, 733645M1, 733644M1 (Item #: 183801, Ref: 733644M1) $0.70

No
Picture
Cylinder Head, Used - For Massey Ferguson tractor model 360, Replaces Massey Ferguson Casting number 3711617A, Engine(s): Perkins 3-152, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 204715, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404715) $450.01

Engine Backing Plate - This Engine Backing Plate is used on Perkins AD3.152 Direct Injection Engine with Lip Type Seal. It is also known as a Flywheel Housing Adapter Plate. It Replaces: Perkins number 37147974, Massey Ferguson 741401M1. Used on 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E (Item #: 165510, Ref: 741401M1) $162.00

Flywheel - This Flywheel with Ring Gear is Used for a 12 Inch Clutch. It is used on 231, 240, 250, 263, 360, 20D, 20E, 30E, 30H, 40E. Additional $25.00 shipping due to weight. Replaces 740681M91, 41115004 (Item #: 185837, Ref: 740681M91) $404.00

Flywheel Tab Washer - This Flywheel Tab Washer is used on Massey Ferguson 35, 50, 65, 135, 150, 165, 175, 180 230, 235, 245, 255, 265, 275, 231, 240, 250, 253, 360, 362, 270, 282, 283, 375, 383, 390, 390T, 398, 399, 202, 203, 204, 205, 302, 304, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E, 30, 31, 40, 3165. It Replaces 731192M1, 731192M1, 731192V1 (Item #: 153307, Ref: 731192M1) $1.40

Multipower Transmission Clutch Kit - For Massey Ferguson tractor models 30, 35, 50, 65, 135 (UK), 150, 165 (UK), 178, 180, 235, 240, 245, 255, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 396, 398, 399, 670, 690, 698, 699, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 40E, 50E, 50H, 60H, Replaces Massey Ferguson OEM number 1672626M1, 185425M1, 185464M1, 186519M1, 186580M1, (Item #: 168778) $235.00

PTO Input Shaft - For Massey Ferguson tractor models 360, 362, 375, Replaces Massey Ferguson OEM number 1869712M91, (Item #: 156333) $158.00

Tappet, Perkins Diesel - Adjustable Tappet. Does not come with adjusting screw or nut. 353430X1 Nut and 32151116 Screw sold separately. Used on A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Perkins Engines. Replaces: 0860012, 731150M1, 957E6489, 81804255, 0860012, 41345 (Item #: 165601, Ref: 731150M1) $8.80

Timing Cover, Front - For tractor models 135, 150, 154-4, 203, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 2500, 253, 254-4, 30B, 30D, 360, 40 all with A3.152, AD3.152 or T3.152 3 cylinder Perkins diesel engines. Replaces 3637397M91, 3637397V91, A5FH0245, ZZ90039, 737211M91, 740226M1, 747454M1, 733988M91, 737211M91. Uses 734661M1 Gasket, sold separately. (Item #: 184551, Ref: 3637397M91) $136.00

Timing Cover, Rear - For tractor models 135, 150, 154-4, 203, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 2500, 253, 254-4, 30B, 30D, 360, 40 all with A3.152, AD3.152 or AG3.152 3 cylinder Perkins engines. (Item #: 179030, Ref: 739477M1) $163.00

Transmission Gear, Used - For Massey Ferguson tractor models F40, TO35, 35, 35X (FE), 50, 65, 135, 135 (FE), 148, 150, 155, 165, 168, 175, 178, 185, 188, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 431, 451, 471, 481, 543, 565, 575, 583, 590, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 204, 205, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180419M1, Splines: 17, Teeth: 23, 8 Speed Transmission, For a new version of this item use Item #: 173295, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460714) $15.01

Valve Spring Seat, Lower - Used on Perkins engines: AD3.153, A3.152, T3.152, AD4.203. A4.203. Replaces Massey Ferguson 736185M1, Ford E39CP9, Allis Chalmers 72080049, Perkins 33415133 (Item #: 166885) $12.20

Valve Tappet Adjusting Nut - This Valve Tappet (Lifter) Adjusting Screw Nut is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. 3/8' inch UNF Thread. It is used with Screw 32151116 sold separately. It replaces OEM part numbers: 353430X1, 0576052, 70251225, 353438X1 (Item #: 184396, Ref: 353430X1) $3.00

Valve Tappet Adjusting Screw - This Valve Tappet (Lifter) Adjusting Screw is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. Locking nut 353430X1 sold separately. It replaces OEM part numbers: 957E6549, 731332M1, 0720677, 72080053, 32151116, 3638112M1, 32151116 (Item #: 183828, Ref: 32151116) $14.90

Valve Train Kit - For Massey Ferguson tractor models 253, 355, 360, Compatible with Massey Ferguson Construction and industrial models 40E, 40EL, Compatible with Perkins Engine (s) T3.152.4 (turbo diesel), Bore: 3.602", Build Codes: CN31157, CN31158, CN31187, CN31219, Kit includes: Intake and exhaust valves, guides, springs and keepers, (Item #: 160644) $98.00

Engine Rings

Piston - For Massey Ferguson tractor models 30, 50, 65, 135, 140, 148, 150, 154, 154-4, 155, 158, 165, 203, 230, 231, 233, 234, 235, 240, 245, 250, 253, 254, 254-4, 255, 260, 302, 304, 340, 342, 350, 353, 353LX, 360, 550, Replaces Massey Ferguson OEM number 3638405M91, 4224523Z91, 4224523M91, Number of Rings: 4, Chamber: 59.82mm, Compression Height: 61.57mm, Crown: 90.75mm, Height: 109.24mm, Pin: 31.75mm, (Item #: 169819) $63.00

Fuel System / Air Intake

Cable - Hand Throttle, 3759022M91 - For Massey Ferguson tractor models 360, 362, Replaces Massey Ferguson OEM number 3759022M91, Length: 44-3/4", (Item #: 161959) $8.00

Fuel Cable - For Massey Ferguson tractor models 360, 362, 365, 383, 390, 390T, 393, 398, Replaces Massey Ferguson OEM number 3701713M91, Overall Length: 50-1/2", (Item #: 121223) $22.00

Fuel Filter - Fuel filter element, external body type. 4-3/8 inch high. For tractors: MF230, 235, 245, 255, 265, 270, 275, 282, 283UK, 283 Brazil, 290, 360, 375, 383, 390, 390T, 398, 670, 690, 2745, 2775, 2805, 3050, 3060, 3070, 3505, 3525, 3545, 3630, 3680, 3690, Industrials: 20C, 30B, 30D, 30H, 40B, 50C, 50D, 50E, 50F, 50HX, 60H, Forklifts: 4500, 6500. Can replace Perkins 26560602, 1896287M91. (Item #: 125902, Ref: 3405419M1) $19.80

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $16.30

Fuel Filter, CAV type - Fuel filter for tractor models 290UK, 298, 30, 3090, 3095, 3120, 3125, 3140, 35, 3545, 360, 362, 364, 3645, 3655, 3660, 374, 384, 394, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, MH50, 6170, 6180, 6235, 6245, 6255, 6265, 6270, 6280, 6290, 65, 698, 699, 8120, 8210. Replaces 836218M91, 1851890M1, 1049939M1. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $9.30

Fuel Filter Head - This Fuel Filter Head is used on CAV type fuel systems on Massey Ferguson. Replaces original part numbers 1891262M1, 1044869M1. Uses filter part number D8NN9176AA. Note, this filter head has two 1/2 inch UNF thread ports on the top. (Item #: 178935, Ref: 1891262M1) $20.00

Fuel Injector Banjo Bolt - This Banjo Bolt is used on Perkins Engines with CAV type Injection Systems. It replaces original part numbers 731567M1, 95315, 067 - 6312, 70251292, 71011878. Uses 2 gaskets order part #921176. (Item #: 168628, Ref: 0095315) $1.60

Fuel Line Seal Kit - This kit includes: 4 33811115 (3/8 O.D. 1/4 I.D. 1/4 W) sleeves, 7 33811113 (7/16 O.D. 1/4 I.D. 1/4 W) sleeves, 4 33811112 (5/16 O.D. 3/16 I.D. 3/16 W) sleeves, and 8 921176 Injector Nozzle Washers. This will service the fuel lines on many 3- and 4-cylinder Perkins equipped models. Perkins 152, 203, 212, 236, 248 Diesel Engines. There will be extra pieces when servicing a 3-cylinder engine. Replaces Perkins 33811115, 33811113, 33811112, 921176, 0921176. Replaces Massey Ferguson 376527V1, 376527X1, 376525X1, 376525V1, 376524X1, 376524V1, 376518V1, 376518X1 (Item #: 187517) $11.50

Fuel Pump - For 148, 203, 20B, 20C, 20E, 20F, 230, 231, 240, 245, 250, 253, 254, 254-4, 255, 30B, 30D, 30E, 30H, 350, 353, 354, 355, 360, 363, 40, 40E, 550. Fuel Pump. 4 hole mount. Replaces 1447582M91, 2641712, 2641808, 4222090M91. (Item #: 117602, Ref: 3637292M1) $23.30

Fuel Sending Unit - For Massey Ferguson tractor models 360, 362, Replaces Massey Ferguson OEM number 1694976M2, 3762579M1, (Item #: 119760) $59.00

Fuel Tap - Fuel Tank Shut Off Valve for models: 20D, 20F, 240, 250, 253, 270, 283, 283 UK, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 398, 50H, 60H. Also replaces 1694985M91 and 1694985V92 (Item #: 113632, Ref: 1694985M92) $17.60

No
Picture
Hand Throttle Return Spring - For Massey Ferguson tractor models 240, 243, 253, 263, 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 396, 398, 399, 430, 431, 461, 543, Replaces Massey Ferguson OEM number 1695472M1, (Item #: 173645) $4.40

Heater Plug - Heater Plug Thermostat Burner with Thread Connector. Also replaces 13H2468 and 2666103. For 1007, 1014, 1114, 1134, 1250, 135, 148, 165, 168, 174, 175, 178, 185, 188, 20B, 20D, 20E, 20F, 230, 240, 250, 255, 265, 274SK, 275, 285, 290, 3050, 3060, 3065, 3070, 30D, 30E, 30H, 35, 350, 353, 355, 360, 363, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E, 50, 50B, 50D, 50E, 530, 535, 550, 560, 565, 575, 590, 60H, 65, 660, 665, 675, 690, 698, 699, 800, 805, 820, 825, 830, 835, 840, 845. Replaces 2666103, 893501M91, 893501M1, 893501V91 (Item #: 129233, Ref: 893501M1) $15.60

Injector Leak Off Line Washer - Two of these are used per injector on Perkins Engines using CAV type fuel Systems. Replaces 376518X1, 921176, 067 - 7011, 159048A, 500730, 70251294, TX10361, TX50047, 380428S, 81821105. (Item #: 168625, Ref: 921176) $0.60

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $38.20

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $19.00

Manifold Heater - Thermostart Intake Manifold Heater on Perkins Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: 893501M91, 1446935M1, 2666108, 3583453M2, 3583543M2, 3583543V2, 1854125 (Item #: 118792, Ref: 3583543M2) $10.90

Shut Off Cable - This Shut Off Cable is 41.5 inches long. It is used as original equipment on Massey Ferguson 1004, 230, 235, 240, 253, 263, 350, 355, 360, 4225, 4235, 4245, 4255, 4265, 698, 699. Also can be used as a universal part is a 41.5 Inch cable is needed. Replaces original part numbers 1670157M1, 3701712M91, 3597064M92, 3597064M91 (Item #: 121222, Ref: 3597064M92) $31.20

Thottle Cable - This Throttle Cable is used for foot control throttles. It is 47 inches long. It replaces original part numbers 3759026M91, 1696815M94 1696815M93, 3759026V91 (Item #: 151002, Ref: 1696815M94) $25.30

Throttle Cable - This is the Injector Pump Throttle Cable. It is 8 inches long. Used on Massey Ferguson 240 with Ergonomic Pedals, 253 and 360. It replaces original part number 1696818M94 (Item #: 161996, Ref: 1696818M94) $15.70

Throttle Cable - Foot - For Massey Ferguson tractor models 360, 365, 375, 383, 390, 393, 396, 398, 399, Replaces Massey Ferguson OEM number 3759024M91, Foot Throttle Cable, 28" Long, (Item #: 151001) $14.30

Throttle Control Slider - This Throttle Control Slider is used on 240, 253, 360, 362, 375, 383, 390, 393, 398, 399, 3050, 3060, 3065, 3070, 3090, 3120, 3140, 3630, 3650, 3660, 3680, 390T. It replaces original part number 1695458M1 (Item #: 180329, Ref: 1695458M1) $2.10

No
Picture
Throttle Control Spring - For Massey Ferguson tractor models 240, 250, 253, 263, 283 (Brazil), 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 399, 670, 690, 698, 699, 3050, 3060, 3070, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 20E, Replaces Massey Ferguson OEM number 1660773M2, (Item #: 173632) $4.70

Throttle Linkage Slider Housing - This Throttle Linkage Slider Housing is used on Massey Ferguson 240 with Ergonomic Pedals as well as 253, 360, 362, 375, 383, 390, 393, 398, 399, 3050, 3060, 3065, 3070, 3090, 3120, 3140, 3630, 3650, 3660, 3680, 390T. Replaces 1696854M2 (Item #: 180330, Ref: 1696854M2) $6.00

Gauges

Switch, Water Temperature Sending Unit - Sending unit, water temperature. For tractors: MF25, MF130, MF154-4, MF154-S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF254-4, MF270, MF274-4, MF283 except Brazil, MF285 to serial number 9A34239, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF2675, MF2705, MF2745, MF2775, MF2805, MF3050, MF3060, MF3070, MF3090, MF3505, MF3525, MF3545, MF3630, MF3650, MF3660 Industrials: 20D, 30E, 40E, 50E. Replaces 1877731M92, 1877731M93, 1877731V92, 531209M1 (Item #: 121163, Ref: 1877731M92) $6.90

Hitch / Drawbar

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.10

Draft Control Lever Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 173059, Ref: 1660324M91) $39.00

No
Picture
Heavy Duty Leveling Box Knuckle - For Massey Ferguson tractor models 65, 165 (UK), 175 (UK), 175, 180, 185, 235 (UK), 240, 245, 250, 255, 265, 270 (UK), 271, 275 (UK), 275, 281, 283 (UK), 283, 285, 290 (UK), 298 (UK), 350 (UK), 360, 362, 375, 383 (UK), 383, 390, 390T, 393, 398, 399, 461, 543, 670, 690, 698, 699, 1080, 1085, 3050, 3060, 3065, 3070, 3075, 3080, 3090, 3095, 3120, 3125, 3140, Compatible with Massey Ferguson Construction and industrial models 30, 30E, 31, 40E, 50C, 50D, 50E, 203, 205, 302, 304, 3165, Replaces Massey Ferguson OEM number 897653M2, 893560M1, 897653M1, 897653V2, (Item #: 176231) $16.20

No
Picture
Hydraulic Lift Shaft Bushing - For Massey Ferguson tractor models 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 393, 398, 399, 670, 680, 698, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40E, 50C, 50D, 50E, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 1870934M1, Dimensions: 2-3/16" x 2-3/8" x 2-55/64", With oil spot, (Item #: 173699) $16.70

Leveling Box Assembly - With Hand Crank adjusts from 20.5 inches to 26 inches. For tractor models 65, 175, 180, 205, 230, 240, 245, 250, 253, 255, 270, 283, 290, 298, 302, 304, 360, 362, 390, 390T, 393, 399, 670, 690, 3090, 3120, 3140, 3165, 30E, 40E, 50E. Replaces 893569M92, 1884760M92, 1884760M94. (Item #: 110256, Ref: 1884760M92) $70.00

Leveling Box Assembly - Adjusting from 21 inches to 25 inches center to center on the pin holes, this right hand leveling box assembly replaces Massey Ferguson part numbers: 1887372M91, 893570M92, 897649M9, 897649M95 (Item #: 110256, Ref: 1887372M91) $70.00

No
Picture
Leveling Box Assembly Without Fork, Right Hand - For Massey Ferguson tractor models 35X, 135, 150, 165, 175, 230, 240, 245, 255, 265, 275, 285, 360, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 30, 202, 203, 204, 205, 302, 304, 2135, 2200, Replaces Massey Ferguson OEM number 193178M91, Right Hand, Thread: 3/4" - 10 Right Hand, (Item #: 172530) $74.00

No
Picture
Lift Arm Ball - Cat 1 - For Massey Ferguson tractor models 135, 165, 231, 235, 240, 250, 253, 261, 360, 362, 390, Replaces Massey Ferguson OEM number 886428M1, (Item #: 165858) $6.60

Lift Arm Ball with Clip, Category II - This ball measures: Inside Diameter: 1-1/8 inches, Outside Diameter: 2-1/4 inches. Width: 1-3/4 inches. Includes retaining clip. Replaces 886429M1, 1860936M1 (Item #: 192517) $13.50

No
Picture
Lift Link Rockshaft Pin - For Massey Ferguson tractor models 65, 175, 180, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 390, 390T, 398, 399, 451, 461, 471, 481, 491, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 30, 30E, 31, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 1694025M1, 893568M1, (Item #: 174744) $5.00

No
Picture
Lift Link Yoke Clevis Pin - For Massey Ferguson tractor models 65, 135, 165, 168, 175, 178, 180, 185, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 394, 399, 451, 461, 471, 481, 491, 492, 543, 575, 583, 590, 596, 670, 675, 690, 698, 699, 1080, 1085, 3050, 3060, 3070, 3080, 3090, 3095, 3120, 3125, 3140, Compatible with Massey Ferguson Construction and industrial models 20F, 30, 30E (UK), 31, 40, 40B, 40E, 40E (UK), 50C, 50D, 50E, 203, 205, 302, 304, 3165, Replaces Massey Ferguson OEM number 3582662M1, 893567M1, Fits Massey Ferguson tractor models 299, 765, (Item #: 174723) $7.90

Lower Lift Arm Pin - Used on tractors with square axles, this pin is 5 1/2 inches long and 1 1/8 inches in diameter. Replaces part numbers 906263M2, 1695314V1, 1695314M1, 1695531M1, 1867243M1, 354101X1 (Item #: 173351, Ref: 1695314M1) $13.60

Lower Lift Arm, RH or LH, CAT II - This replacement Lower Lift Arm is Category II on both ends. It measures approximately 38 inches center to center on the balls. Used on 165, 168, 185, 188, 260, 261, 265, 275, 282 UK, 282 US Built, 285 (FR), 360, 362, 365, 372, 375, 375E Brazilian, 390, 390T, 575, 675. Replaces 1869218M1, 1863435M94, 1863435M95, 1863436M94, 1869219M1, 810285M92, 886428M1, 893430M93. (Item #: 173308, Ref: 1863435M95) $163.25

Response Control Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50 (C, D, E, ). (Item #: 172613, Ref: 1661918M91) $26.60

Retaining Clip Ring - For Massey Ferguson tractor models TE20, TEA20, 35, 35X, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 461, 543, 575, 590, 675, 690, 698, 699, 3050, 3060, 3070, 3080, 3090, 3095, 3140, Compatible with Massey Ferguson Combine (s) 550, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 193092M1, (Item #: 173702) $3.61

Stabilizer Pin - This Pin is used with telescoping stabilizers and with 514992M2 bracket. Uses 186809M1 Nut, sold separately. It replaces original part number 521006M1. Large shoulder 1.10 in. dia x 1.23 in. long, smaller shoulder .862 in. dia x 2.28 in. long. Threads 3/4 - 16 UNF Right Hand Thread (Item #: 170300, Ref: 521006M1) $22.70

Stabilizer Pin - For Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 168, 175, 180, 185, 265, 275, 282, 360, 383, 398, 399, 565, 575, Compatible with Massey Ferguson Construction and industrial models 20, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, 220, 302, 304, 356, 2135, 3165, Replaces Massey Ferguson OEM number 893420M1, 354568X1, Length: 3", Pin Diameter: .867", Pin Hole: .388", Thread: UNF - 3/4" -16, (Item #: 170492) $6.70

Stabilizer Pin Nut - This Stabilizer Pin Nut is used with 521006M1 Pin. It is 3/4 16 UNF Right Hand Thread. It replaces original part number 3609473M1, 186809V1, 186809M91, 186809M1, 767743 (Item #: 116643, Ref: 186809M1) $2.40

Telescoping Stabilizer - For tractor models 250, 251, 253, 255, 261, 265, 270, 275, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 1085. Stabilizer, telescoping arm. Adjustable from 26 to 35 inches. (Item #: 170264, Ref: 539881M2TSK) $59.00

Top Link - For Massey Ferguson tractor models 175, 282, 283, 360, 362, 375, 383, 390, 390T, 3680, Compatible with Massey Ferguson Construction and industrial models 40E, 50E, Replaces Massey Ferguson OEM number 19876A1, 21-1/2" Center Tube, C to C Max: 34..25", C to C Min: 25", (Item #: 165909) $45.10

Hydraulic System

Control Valve, Mark III Pumps - Used on Massey Ferguson 240 built after 08/1991, 253 built after 08/1991, 283UK, 360 built after 08/1991, 362 built after 08/1991, 375 built after 08/1991, 383 built after 08/1991, 390 built after 08/1991, 390T built after 08/1991, 393, 396, 398 built after 08/1991, 399 built after 08/1991, 4225, 4235, 4243, 4245, 4253, 4255, 4263, 4270, 431, 461, 471, 481, 491, 492, 543 Industrial 20F with Vertical Mounted Control Valve. (Item #: 187548, Ref: 3611085M91) $84.28

Control Valve, Mark III Pumps - Used on Massey Ferguson 240 built after 08/1991, 253 built after 08/1991, 283UK, 360 built after 08/1991, 362 built after 08/1991, 375 built after 08/1991, 383 built after 08/1991, 390 built after 08/1991, 390T built after 08/1991, 393, 396, 398 built after 08/1991, 399 built after 08/1991, 4225, 4235, 4243, 4245, 4253, 4255, 4263, 4270, 431, 461, 471, 481, 491, 492, 543, Industrial 20F with Vertical Mounted Control Valve. (Item #: 187548, Ref: 3611085M91) $84.28

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Item #: 173324, Ref: 897504M1) $0.90

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Item #: 111829, Ref: 193400M1) $10.70

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

Draft Control Plunger - This Draft Control Plunger has a 1.865 Inch Head Diameter. It replaces original part numbers 898136M1, 886348M2, 886351M1 (Item #: 163454, Ref: 898136M1) $19.10

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35, TO30, TO20, TE20. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Item #: 165989, Ref: 9N547B) $35.30

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Item #: 173302, Ref: 898124M1) $12.70

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.00

No
Picture
Draft Control Shaft - This Draft Control Shaft is used on 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E. Replaces 1870243M92 (Item #: 170866, Ref: 1870243M92) $12.00

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Item #: 180233, Ref: 898127M2) $5.70

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $450.00

Hydraulic Coupler - Hydraulic coupler for the following models: 360, 362, 375, 383, 390, 393, 396, 398, 399, 3090, 3120, 3630, 3650, 3660, 3680, 390T. Replaces: 1696241M91, 1696241M92, 3384873M4, 3384873M8, 3384874M4, 3611673M1, 3772942M1, 3794298M1, 3794298M2, 3905722M91, 4352104M1. (Item #: 163708, Ref: 3384873M8) $55.00

Hydraulic Cylinder Stud, 3 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 3 Inch Stud. Verify length before ordering. Replaces 1667579M1, 1667580M1, 1667580M2, 899258M1 (Item #: 173649, Ref: 899258M1) $7.70

Hydraulic Cylinder Stud, 4 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 4 Inch Stud. Verify length before ordering. Replaces 1667579M2, 1667579M1, 908934M1, 899257M1. (Item #: 173644, Ref: 899257M1) $5.30

Hydraulic Cylinder Stud Nut - Hydraulic Stud Nut is used with 899258M1 and 899257M1 Studs. It is 9/16 UNF Thread (Din 934). Replaces 368749X1 (Item #: 173194, Ref: 368749X1) $11.20

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $116.00

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Pump - For Massey Ferguson tractor models 360, 362 (Engine s/n B32999-earlier), 365 (Engine s/n B32999-earlier), 375 (Engine s/n B32999-earlier), 390 (Engine s/n B32999-earlier), 390T (Engine s/n B32999-earlier), 393 (Engine s/n B32999-earlier), 396 (Engine s/n B32999-earlier), 398 (Engine s/n B32999-earlier), 399, Replaces Massey Ferguson OEM number 3614362M93, 1694379M91, (Item #: 170494) $768.24

Hydraulic Pump Camshaft Bushing - This Hydraulic Pump Camshaft Bushing is used on MK1 and MK2 Pumps. It has an inside diameter of 1-3/8 inches, outside diameter of 1-5/8 inches and is 7/8 inches wide. Replaces OEM numbers: 1664491M1, 1664491M2, 195949M1, 1865012M1, 1865012M1 (Item #: 167290, Ref: 1664491M1) $5.60

No
Picture
Hydraulic Pump Kit, MK III, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 230, 231, 233, 234, 235, 240, 243, 245, 250, 253, 254, 255, 260, 261, 263, 265, 265S, 273, 274, 275, 283, 284, 285, 285S, 290, 294, 298, 340, 342, 350, 353, 353LX, 355, 356, 360, 362, 363, 364, 364S, 365, 372, 373, 374, 374S, 375, 377, 382, 383, 384, 384S, 387, 390, 390T, 393, 394, 394S, 396, 397, 398, 399, 440, 550, 560, 565, 575, 590, 592, 595, 675, 690, 698, 699, 1200, 1250, 4225, 4235, 4240, 4245, 4260, 4265, 4270, 4315, 4325, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 20B, 20D, 20E, 30D, 30E, Replaces Massey Ferguson OEM number 1810860M93, 1810860M92, Mark III Pump, 25 mm, (Item #: 168738) $214.50

Hydraulic Pump O-Ring and Gasket Kit - This O-Ring Kit with Gaskets is used on 230, 235, 245, 255, 265, 275, 1080, 1085, 285, 231, 240, 250, 253, 360, 362, 270, 282, 283, 290, 298, 20D, 30E, 40E Replaces 1810680M91 (Item #: 165750, Ref: 1810680M91) $14.60

Hydraulic Pump Piston Ring - Hydraulic Pump Piston Ring is used with 1860038M1. Two are used per piston, 4 per Tractor. Sold individually. (Item #: 165929, Ref: 897493M1) $1.80

No
Picture
Hydraulic Pump Response Spring - For Massey Ferguson tractor models 178, 230, 231, 235, 240, 240P, 245, 250, 251XE, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290, 298, 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 396, 398, 399, 431, 451, 461, 471, 481, 491, 492, 543, 670, 690, 698, 699, 1085, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 1868454M2, (Item #: 173689) $0.90

Hydraulic Pump Strainer Assembly - Verify measurements of 2 7/16 inch outside diameter, 1 5/8-7/16 inch inside diameter, 3 3/4 inch height. For tractor models 1080, 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 40, 50C, 550, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699, 765. Hydraulic Pump Strainer also replaces 1687042M91, 1687042V91, 1810744M91, 1870199M92, 1687042M1. (Item #: 116132, Ref: 1687042M91) $10.60

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Reservoir - For Massey Ferguson tractor models 360, 362, 365, 375, 383, 390, 393, 396, 398, 399, Replaces Massey Ferguson OEM number 3613000M91, (Item #: 115583) $40.40

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.80

Hydraulic valve - This is a Single Hydraulic Remote Valve. It bolts to the lift cover in place of 180908M1 cap. (Item #: 166954, Ref: 12012002) $253.00

No
Picture
Hydraulic Valve Kit - For Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 175, 178, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, (Item #: 176627) $356.00

Hydraulic Valve Kit, Remote Control - This 1 levered, Single Spool Valve includes hoses, quick couplers. The left lever shifts it from 3 point to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 1960s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 164384, Ref: S.65502) $527.00

$Massey Ferguson 360 Lift Arm, LH\RH$
Lift Arm, LH/RH - Used with 897567M3 Cross Shaft (51 spline). It uses a 7/8 inch pin. For tractor models 1080, 1085, 165, 175, 180, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. Replaces 1680040M91, 1680033M1, 1680040M91, 885445M91, 885447M1, 885448M1, 897579M1. (Item #: 151048, Ref: 1680040M91) $57.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $8.90

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.20

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.90

Lift Pump Piston - This Lift Pump Piston has a 0.980 Inch Piston. Uses 897493M1 rings, not included. For tractors: 135, 150, 165, 175, 180, 230, 235, 245, 1080, 1085, 255, 265, 275, 285, 231, 240, 250, 253, 360, 362, 20D, 30E, 40E, 270, 282, 283, 290, 298. Replaces 1860038H1, 1860038M91, 1860038V1, 3158071M1, 518476M1 (Item #: 173306, Ref: 1860038M1) $9.20

Lift Pump Repair Kit - For 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20E, 230, 240, 250, 253, 265, 275, 285, 290, 298, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 398, 399, 40E, 550, 565, 575, 590, 595, 65, 690, 698, 698T, 699, 765, 965. Hydraulic Lift Pump Repair Kit contains (4) rings, (4) springs, (2) valves, (2) lock rings. (Item #: 173072, Ref: 1810678M91) $14.70

Lift Pump Valve Assembly - This Lift Pump Valve Assembly measures 7.5 inches in length and is for tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 240P, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 550, 565, 575, 590, 670, 675, 690, 698, 698T, 699. Valve is 7.5 inches long. (Item #: 165752, Ref: 1681789M91) $39.20

Lift Response Plate - This Lift Response Plate is used on Massey Ferguson Tractors: 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1884877M93, 1872648M93 (Item #: 173307, Ref: 1872648M93) $52.00

Lift Shaft - 51 spline, 2 3/16 inch diameter. (1 hole in end). Replaces 897567M3, 897567V3. (Item #: 151049, Ref: 897567M3) $89.00

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

Power Steering Filter - For tractor models 342, 350, 352, 355, 360, 362, 365, 375, (382N SN# B18009 and up), 390, 390T, 398, 399 all with tandem pump. (Item #: 111096, Ref: 3595175M1) $53.00

Pressure Control Shaft - Used on some or the following Massey Ferguson Models: 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E, this part measures 10 - 9/16 inches. Verify measurement before ordering as many of these models used more than one size. (Item #: 170902, Ref: 1870219M93) $18.10

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $3.90

Quadrant Support - This Quadrant Support is used on Massey Ferguson 135UK serial 439191 and up, 165UK serial number 132849 and up, 230 with Lift Cover 1870952M91, 231, 235 with Lift Cover 1870955M1, 255, 265, 270, 275, 282, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 390, 698, 699, Industrial 20 with Lift Cover 1870955M1, 20C with Lift Cover 1870950M91, 20D, 20E, 20F, 30 with Lift Cover 1870955M1, 30B, 30D, 30E, 40 with Lift Cover 1870955M1, 40B, 40E, 50C, 50D, 50E. Replaces 1870240M1 (Item #: 164696, Ref: 1870240M1) $32.10

Response Control Shaft - This Response Control Shaft is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 898208M2 (Item #: 179593, Ref: 898208M2) $24.00

Response Cover - This Response Cover is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1668053M1 (Item #: 180324, Ref: 1668053M1) $16.50

Response Lever - This Response Lever is used on 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1662278M2 (Item #: 180325, Ref: 1662278M2) $4.40

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Standpipe, Hydraulic Oil Pressure - 9.75 inches long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Item #: 155347, Ref: 1869119M1) $16.80

Stand Pipe, Hydraulic Oil Pressure - 12.500 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 245, 253, 255, 285, 30, 302, 304, 31, 3165, 360, 362, 375, 383, 390, 390T, 3925, 40, FE135 Coventry. (Item #: 124227, Ref: 898229M1) $21.60

Lights

Light Switch - This is a three position light switch used on Massey Ferguson models: 342, 350, 355, 360, 362, 365, 372, 375, 390, 390T. Replaces 3611533M1 (Item #: 178921, Ref: E9NN11654AA) $28.20

Miscellaneous

Gear Shift Boot - For Massey Ferguson tractor models 360 (with 12 speed syncromesh trans.), 362 (with 12 speed syncromesh trans.), 375 (with 12 speed syncromesh trans.), 390 (with 12 speed syncromesh trans.), 390T (with 12 speed syncromesh trans.), 398 (with 12 speed syncromesh trans.), 399 (with 12 speed syncromesh trans.), Replaces Massey Ferguson OEM number 1694126M3, (Item #: 158902) $7.40

No
Picture
Instrument Panel Molding - For Massey Ferguson tractor models 231, 240P, 243, 253, 263, 270, 275, 283, 290, 298, 350, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, Compatible with Massey Ferguson Construction and industrial models 50E, Replaces Massey Ferguson OEM number 1877887M2, (Item #: 173708) $9.40

No
Picture
Roller - For Massey Ferguson tractor models 20, 30, 31, 40, 135 (Without Pressure Control), 150 (Without Pressure Control), 165 (Without Pressure Control), 175 (Without Pressure Control), 180 (Without Pressure Control), 205, 230 (s/n 9A349239-earlier), 230 (s/n 9A349239-later), 231, 231S, 235, 240 (s/n N01001-earlier), 240 (s/n N01001-A20286), 240 (s/n A20286-later), 240P, 241, 245 (s/n 9A349239-earlier), 245 (s/n 9A349239-later), 250, 253, 255, 261, 263, 265, 265 (s/n 9A349239-later), 270, 271, 275 (s/n 9A349239-earlier), 275 (s/n 9A349239-later), 281, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 362, 365 (s/n B18009-earlier), 375 (s/n B18008-earlier), 375 (s/n B18009-earlier), 383, 390 (s/n B18008-earlier), 390 (s/n B18009-earlier), 390T (s/n B18009-earlier), 393, 396, 398 (s/n B18008-earlier), 398 (s/n B18009-earlier), 399 (With A6-354.4 Engine), 399 (With 1006.6 Engine), 451, 471, 481, 670, 690, 698, 699, 2135, 2200, 3165, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30B, 30D, 30E, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 898189M2, (Item #: 165561) $0.50

No
Picture
Spool Valve - For Massey Ferguson tractor models 240, 253, 263, 271, 281, 283 (UK), 360, 362, 365, 375, 383, 390, 390T, 393, 394, 394S, 396, 398, 399, 431, 461, 3050, Replaces Massey Ferguson OEM number 1696239M93, 1810876M12, 1810876M93, 1810876M92, 1810876M91, 1811097M11, 1811097M92, 1811097M91, 3900553M13, 3900553M94, 3900553M93, 3900553M92, 3900553M91, (Item #: 172402) $990.00

No
Picture
Transmission Thrust Washer - For Massey Ferguson tractor models 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 360, 362, 375, 451, 461, 471, 481, 543, 583, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 356, 2135, 2200, 2500, 3165, 4500, 6500, Replaces Massey Ferguson OEM number 897367M1, 4.125" x 5" x .055", (Item #: 176214) $15.00

Oil System

Dipstick - Dipstick for oil is 7 inches in length. Models using Perkins A3-152, AD3-152, A4-203 and AD4-203 engines. Also replaces 31786412. For tractor models DT5500, 135, 148, 150, 154-4, 1545, 158, 20, 202, 203, 205, 20C, 20D, 2135, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 30, 300, 302, 304, 30B, 30D, 3165, 35, 350, 356, 360, 40, 40B, 4500, 4830FC, 50, 50A, 550, 5830, 5830FC, 5860, 5870, 6030FC, 6070, 65, 765. (Item #: 121771, Ref: 731117M91) $7.30

No
Picture
Oil Filler Cap - For Massey Ferguson tractor models 135, 154-4, 165, 174-4, 175, 178, 184-4, 194-4, 231, 240, 240P, 253, 254-4, 265S, 270, 274-4, 275, 282, 283, 285S, 290, 294-4, 360, 362, 364S, 365, 375, 383, 390, 390T, 393, 398, 670, 690, 3050, 3060, 3065, 3070, 3075, 3645, 6140, 6150, Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 20F, 24, 25, 30E, 30H, 40B, 40E, 50E, 50F, 50H, 60, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 734962M91, Replaces JCB OEM number 02101448, 02101484, Replaces Leyland OEM number AJR4054, Replaces Perkins manufacturer number 2487854, (Item #: 164390) $4.40

Oil Filter Head Gasket - This Oil Filter Head Gasket is used on Massey Ferguson tractors with Perkins Engines. Replaces 4222003M1, 0490514, 490514, 731124M1 (Item #: 166425, Ref: 731124M1) $1.20

Oil Pan Drain Plug - This is a 3/4 inch 16 thread Oil Pan Drain Plug. Uses C9NN6734A washer, not included. It replaces original part numbers 376501X1, 735129M91, 748160M1 (Item #: 140610, Ref: C9NN6730B) $3.40

No
Picture
Oil Pan Drain Plug - For Massey Ferguson tractor models 35, 135, 148, 154-4, 165, 168, 175, 178, 184-4, 185, 188, 240, 243, 250, 253 (T3.152.4 engine), 254, 255, 261, 263 (T3.152.4 engine), 274, 285, 290, 360, 362, 363, 365, 375, 383 (A4.248 engine), 390, 390T, 393, 396 (6.60 engine), 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 583, 590, 595, 596, 650, 675, 680, 690, 698, 1080, 1100, 2620 (s/n S271212 -earlier), 2640 (s/n S271212 -earlier), 2645 (s/n S271212 -earlier), 2680 (s/n S271212 -earlier), 3050, 3060, 3065, 3070, 3075, 3080, 3090, 3095, 3115, 3120, 3120 (turbo), 3125, 3630, 3645, 3650, 3655, 3660, 4215, 4220, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4315, 4320, 4325, 4345, 4355, 4360, 4365, 4370, 5275, 5285, 5290, 5300, 5320, 5425, 5435, 5445, 5450, 5455, 5460, 5465, 5475, 6140, 6150, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 7465, 7475, 8110 (T6.60 engine), 8120, 8130 (T6.60 engine), 8210, 8220, Compatible with Massey Ferguson Combine (s) 530, 535, 565, 660, 750, Compatible with Massey Ferguson Construction and industrial models 20D, 40, 50, 50B, 2135, 2200 Replaces Massey Ferguson OEM number 376501X1, 748160M1, , Compatible with Perkins Engine (s) 1006-6T, Replaces Perkins OEM number 2487004, Replaces JCB OEM number 02100072, 02101691, Replaces manufacturer number VPC4400, Fits JCB Dump Truck (s) 712, 716, Fits JCB Wheel Loader (s) 425, Gasket not included, (Item #: 173857) $3.20

Oil Pan Drain Plug Washer - Used with C9NN6730B 3/4 inch Oil Pan Drain Plug. (Item #: 140611, Ref: C9NN6734A) $1.60

PTO / Driveline

Bearing - Bearing, for PTO front drive shaft housing, 2.8120 inch outside diameter determine bearing outside diameter before ordering. For 6 and 8 speed and multi-power transmissions. Replaces 899377M1, 3760514M1, 899377M2 (Item #: 176234, Ref: 899377M2) $22.20

No
Picture
Hydraulic Link Roller - For Massey Ferguson tractor models 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165, Replaces Massey Ferguson OEM number 898125M1, (Item #: 176342) $5.00

No
Picture
Output Shaft, PTO Seal - A PTO output shaft outer oil seal measures 2.323 inches inside diameter, 3.150 inches inside diameter and is .394 inches wide. For tractors: MF230 axle serial number FD101, CD8028 and up, MF231, MF235 live PTO with axle serial number FD101 and up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to serial number P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle serial number FD101, CD8028 and up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle serial number FD101 and CD8028 and up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860. Verify measurements to make sure you are ordering the correct seal. (Item #: 107013, Ref: 834216M1) $8.40

PTO Brake Pad - Replaces 888739M1, 1662242M2. For tractor models 1080, 135, 148, 155, 158, 165, 168, 185, 188, 240, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 575, 590, 595, 675, 690, 698, 699. (Item #: 105641, Ref: 1662242M2) $37.90

PTO Cap - For tractor models 230, 235, 240, 243, 245, 250, 253, 255, 260, 263, 265, 270, 275, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 20, 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H, 50HX, 60H. (Item #: 119997, Ref: 532888M1) $11.80

PTO Clutch Spring - Used on tractors with Independent Power Take Off (IPTO) on Massey Ferguson 1004, 1004T, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 185, 188, 20E, 230, 240, 250, 253, 255, 260, 2620, 2640, 265, 2680, 270, 2720, 275, 285 (FR), 290, 290 Brazilian, 290 US Built, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30E, 3115, 3120, 340, 350, 355, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40E, 50E, 50H, 550, 560, 565, 575, 590, 592, 595, 60H, 670, 675, 690, 698, 698699, 698T, 699. Replaces 1660406M1, 3795274M1, 514210M1, 1870857M1 (Item #: 117299, Ref: 1660406M1) $7.20

PTO Disc - 5.039 inch outside diameter, 3.457 inch inside diameter, 57 internal teeth. For tractor models FE35, 20C, 30, 30E, 31, 35, 40B, 40E, 50, 50C, 50D, 50E, 65, 85, 88, 90, 135, 150, 165, 175, 180, 235, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 398, 670, 690, 698, 699, 1080, 1085, 1155, 4800, 4840. Replaces 190177M1, 533326M2, 1870879M1. (Item #: 114029, Ref: 1672626M1) $10.80

PTO Drive Shaft Bearing Housing, Used - For Massey Ferguson tractor models 135, 150, 165, 175, 180, 235, 240, 265, 275, 285, 360, 362, 365, 375, 390, 390T, 398, 399, 431, 451, 461, 471, 481, 491, 492, 543, 583, 596, 1080, 1085, 4243, 4253, 4263, Replaces Massey Ferguson OEM number 899331M1, For a new version of this item use Item #: 173509, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460917) $21.01

PTO Fork - For tractor models 20, 20C, 230, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 30B, 30E, 350, 360, 362, 375, 383, 390, 40B, 50E. (Item #: 167531, Ref: 1870594M92) $27.30

PTO Gear - 32 outer teeth, 23 splines. For tractor models 165, 175, 20E, 20F, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 360, 375, 383, 390, 40, 40B, 50C. (Item #: 172305, Ref: 1872274M1) $92.00

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Item #: 886366M91) $178.34

Retaining Plate - Used to retain the PTO Seal Housings 532880M1 and 180465M1, this part replaces Massey Ferguson part numbers 1663254M1, 532887M2, 184365M3. Used on 1004, 1004T, 1200, 1250, 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 230, 231, 235, 240, 243, 245, 250, 253, 255, 260, 261, 2625, 263, 2635, 265, 265S, 270, 275, 282, 283, 285, 285S, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 390, 390E, 390T, 396, 398, 399, 40, 40B, 40E, 410, 420, 50, 50C, 50D, 50E, 50H, 560, 565, 575, 590, 60H, 65, 675, 690, 698, 698T, 699, 765. Many of the models listed had more than one PTO system, verify part number before ordering. (Item #: 179426, Ref: 532887M2) $21.30

No
Picture
Sealing Ring - Sealing Ring, Used on Independent PTO Clutch Packs (2) used. (Item #: 183806, Ref: 541551M1) $7.40

Seal, PTO Shaft - Oil seal with and outside diameter of 3.13 inches, inner diameter of 2.22 inches, and a width of .736. For Models 230, 240, 243, 253, 263, 275, 290, 342, 350, 352, 355, 360, 362, 365, 375, 375E Brazilian, 390, 390E Brazilian, 396, 398 (SN (Item #: 3699801M1) $13.86

Sheet Metal / Body Parts

Gas Strut Spring Cylinder, Door - For Massey Ferguson tractor models 342, 350, 355, 360, 362, 365, 372, 375, 382, 390, 396, 398, 399, Replaces Massey Ferguson OEM number 3478319M2, Piston Length: 4.72", Overall Length: 9.83", End Type: Ball and Socket, (Item #: 121279) $22.20

Gas Strut Spring Cylinder, Roof Hatch - For Massey Ferguson tractor models 20, 30, 240, 250, 275, 290, 342, 350, 360, 362, 365, 372, 375, 377, 382, 387, 390, 397, 398, 399, 670, 675, 690, 698, 699, 1014, 2620, 2625, 2640, 2645, 2680, 2685, 2720, 2725, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 3505, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4270, 6110, 6120, 6130, 6140, 6150, 6180, 6190, 8110, 8120, 8130, 8140, 8150, 8160, Compatible with Massey Ferguson Construction and industrial models 20E, 30D, Replaces Massey Ferguson OEM number 1897726M91, 3301617M91, 3303021M91, 3303021M92, Rod Diameter: .315", Cylinder Diameter: .709", Piston Length: 2.362", Overall Length: 7.874", Piston Stroke: 2.756", (Item #: 113221) $29.90

No
Picture
Side Panel - Left Hand - For Massey Ferguson tractor models 340, 342, 350, 355, 360, 362, 365, 372, 375, 382, 383 (s/n A28179-earlier), 390, 396, 398, 399, Replaces Massey Ferguson OEM number 1694859M94, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For Side Panel - Right Hand use Item #: 158295, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158293) $56.00

Side Panel - Right Hand - For Massey Ferguson tractor models 340, 342, 350, 355, 360, 362, 365, 372, 375, 382, 383 (s/n A28179-earlier), 390, 396, 398, 399, Replaces Massey Ferguson OEM number 1694860M94, Fits right hand side, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For left hand side use Item #: 158293, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158295) $46.17

Tractor Mirror Head, 5.47" x 7.48" - For Massey Ferguson tractor models 30, 50, 165 (UK), 360, 375 (s/n B18008-earlier), 390 (s/n B18008-earlier), 398 (s/n B18008-earlier), 399, Compatible with Massey Ferguson Construction and industrial models 30H, 50H, 60, 60H, Replaces Massey Ferguson OEM number 3596262M1, 1891218M91, Convex, Mirror: 5.47" x 7.48", Clamp Adjustment: 0.39" - 0.87", (Item #: 113189) $29.10

Steering

Axle Pivot Bushing - 1-7/8 inch x 2 inch x 1-3/8 inch. For tractor models 20C, 20D, 20E, 20F, 230, 231, 240, 240P, 245, 250, 253, 263, 30E, 360, 362, 40E. Replaces 1660457M1, 1660457M2 (Item #: 165406, Ref: 1660457M1) $11.40

Axle Pivot Pin - For tractor models (154-4S, 174-4S axle serial number 01435 and up), 194-4F, 254-4, 274-4, 294-4, 360, 362, 364S, 390, 390T, 393, 394S, 396, 3050, 3060, 3065, 3075, 6150. (Item #: 151848, Ref: 3426523M2) $53.00

Bushing, Front Axle - 2.070 inch outside diameter, 1.880 inch inside diameter, 2.00 inches long. For tractor models 168, 175, 178, 188, 24, 25, 255, 265, 270, 275, 282, 283, 285, 290, 360, 362, 383, 390, 390T, 393, 398, 399, 40E, 50E, 50H, 50HT, 565, 575, 60H, 60HT, 6500, 670, 675, 6800, 690, (165 South Africa only). (Item #: 176236, Ref: 897712M2) $16.30

Castle Nut - Used as a steering arm nut and a spindle nut in different applications. It is 1 1/4 inch UNF thread. Replaces OEM part numbers: 353931X1, 882263M1, 882263V1, 882263M91 (Item #: 168996, Ref: 353931X1) $5.40

Cylinder End - For Massey Ferguson tractor models 360, 362, 375, 390, 398, 399 (All with 4WD), Replaces Massey Ferguson OEM number 3427168M2, 3427168M1, Dimension A: 3.250", Dimension B: M22 x 1.5 RH Thread, (Item #: 105191) $69.00

Differential Ring Gear Case Assembly - For Massey Ferguson tractor models 30, 31, 40, 50, 50A, 65, 135, 150, 175, 180, 205, 220, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 375, 390, 390T, 399, 670, 690, 698, 699, 1085, Replaces Massey Ferguson OEM number 882783M92, (Item #: 165984) $175.00

Front Axle Lubricating Hose Assembly - Used on Massey Ferguson 20D, 20F, 30E, 30H, 40E, 231, 240, 240P, 250, 360, this kit includes hoses, bracket and fitting. (Item #: 173345, Ref: 1670913M91) $21.00

Front Axle Tab Washer - For Massey Ferguson tractor models 165, 250, 253, 255, 270, 282, 283, 290, 298, 360, 375, 383, 390, 390T, 393, 398, 399, 670, 690, 698, 2640, 2675, 2705, 2745, 2775, 2805, 3050, 3060, 3070, 3120, 3140, 3525, 3545, 3630, 3650, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 30H, 40E, 50E, 50H, 60, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 881384M1, Inside Diameter: 1.252"', Outside Diameter: 2.004", (Item #: 168997) $2.70

Gear - 3rd Pinion, Countershaft - For Massey Ferguson tractor models 253, 263, 265S (Turkey), 275 (UK), 285S (Turkey), 290 (UK), 360, 362, 365 (s/n B18009-earlier), 375, 390, 390T, 393, 394S (s/n D03066-earlier), 396, 398, 399 (with 1006.6 engine), 399 (with A6-354.4 engine), 670, 690, 698, 699, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Replaces Massey Ferguson OEM number 1617923M3, Tooth: 33, Spline: 17, (Item #: 165913) $116.00

Hub Carrier Pivot Pin Bearing - For Massey Ferguson tractor models 154-4, 174-4, 253, 263, 265, 271, 281, 360, 375, 383, 390, 394, 398, 3050, 3060, 3075, 6150, 6235, 6245, 6255, 6265, Compatible with Massey Ferguson Construction and industrial models 50, 60, Replaces Massey Ferguson OEM number 3310930M91, 1042569M1, 1042596M1, 1175920, 303452395, 30-3452395, 3310930M1, AL79901, F199300020180, V31792200, VPJ2447, ZP0750119025, (Item #: 151849) $17.20

Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref: CAR118675) $9.40

Orbital Steering Unit Seal Kit - For Danfoss Unit. Fits tractor models 1014, 1114 serial number 1110249 - 2422U38048, 1134 serial number 1240062 - 2424U41042, 20F, 265, 275, 285 with Hydro Static Steering, 290 with Hydro Static Steering, 298 with Hydro Static Steering, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3095, 30D, 3115, 3120, 3125, 340, 342, 350, 352, 353, 355, 360, 362, 363, 3635, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E Utility and Turf with Manual Shuttle Transmission, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T. (Item #: 165413, Ref: 1810503M92) $29.80

Orbitrol Steering Motor, 2031 PSI - Orbitrol Steering Motor has 12 spline, for 2 Wheel Drive, 100CC, 3/4 JIC. .807 inch diameter. For tractor models 240, 253, 261, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399. Replaces 1695444M91. (Item #: 117338, Ref: S.42755) $300.00

Orbitrol Steering Motor, 2446 PSI - Orbitrol Steering Motor has 12 spline, for 2 Wheel Drive, 100CC, 3/4 JIC., .807 inch diameter. For tractor models 240, 253, 261, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399. Replaces 1695445M91, 1695444M91, TX16053, TX16579. (Item #: 159059, Ref: K207419) $470.65

Pinion Gear, Countershaft 2nd - For Massey Ferguson tractor models 253, 360, 362, 375, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699, Replaces Massey Ferguson OEM number 1687430M1, 20 Teeth, (Item #: 165942) $49.00

No
Picture
Pinion Thrust Washer - For Massey Ferguson tractor models 50, 65, 85, 88, 135, 150, 165, 175, 180, 235, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 451, 461, 471, 481, 543, 583, 670, 690, Compatible with Massey Ferguson Construction and industrial models 11, 20F, 24, 25, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 60H, 203, 205, 302, 304, 2200, 3165, 6500H, 6800H, Replaces Massey Ferguson OEM number 184441M1, (Item #: 173682) $3.30

No
Picture
Pivot Pin Shim Washer - For Massey Ferguson tractor models 231, 240, 240P, 253, 261, 263, 270, 282, 283, 290, 298, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 396, 398, 399, 670, 690, 698, 699, 4225, 4235, 4240, 4245, 4255, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 11, 50E, 50H, 6500, Replaces Massey Ferguson OEM number 882868M1, Inside Diameter: 1.9", Outside Diameter: 2.643", Width: .035", (Item #: 174614) $3.80

Planetary Selector, Used - For Massey Ferguson tractor models F40, TO35, 35, 35X, 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 241S, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 398, 431, 451, 471, 481, 491, 492, 543, 583, 596, 1080, 1085, 2625, 2650, 2660, 2670, 2680, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4263, 4265, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 202, 203, 204, 205, 302, 304, 356, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180446M1, For a new version of this item use Item #: 173169, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460974) $8.01

Power Steering Cylinder - Power Steering Cylinder (5/8 Nut). Overall length with piston in is 10 1/2 inches. Length of housing is 8 7/8. Diameter at center of housing is 2 inches. Fits Models: (240 with Hydrostatic Steering), 253, 360, 362, IND 20F, 30E, 30H, 40E. Replaces 3401553M92, 3774728M91, 3774728V91. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 155051, Ref: 3401553M92) $125.00

Power Steering Cylinder Rod - This Power Steering Cylinder Road is used on Power Steering Cylinder 3401553M92. Replaces 3443036M91. (Item #: 113792, Ref: 3443036M91) $94.00

Power Steering Cylinder Seal Kit - This Power Steering Cylinder Seal Kit Repairs Cylinder's 3401553M92 and 3773716M91. The Kit Includes: 1851626M1 Seal, 1851635M1 Ring, 3186175M1 Seal, 1749973M1 Seal, 1884795M1 Ring and 1442710X1 Seal. Used on Massey Ferguson 20F, 230, 240, 243, 253, 263, 30E, 30H, 340, 350, 352, 355, 360, 362, 372, 40H, 4215, 4220, 4315 (Item #: 169242, Ref: 3404477M91) $20.90

No
Picture
Power Steering Cylinder Seal Kit - For Massey Ferguson tractor models 340, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, Replaces Massey Ferguson OEM number 3484807M91, (Item #: 177112) $33.10

Power Steering Pump - This Power Steering Pump is used one 20F, 240, 253, 255, 263, 340, 360, 40E Tractors when replacing OEM Numbers 3774041M91, 3774614M91, 1695922M91, 3774614V91 (Item #: 154320, Ref: 3774614M91) $778.72

Power Steering Pump with Breather - For Massey Ferguson tractor models 231, 240, 243, 253, 263, 360, Compatible with Massey Ferguson Construction and industrial models 40E, Replaces Massey Ferguson OEM number 3772717M91, 3774041M91, (Item #: 164485) $435.68

Spindle Bushing - 1.680 inch outside diameter, 1.50 inch inside diameter, 1.50 inches long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Item #: 102482, Ref: 183086M1) $6.10

Steering Arm Seal - For Massey Ferguson tractor models 50, 65, 85, 88, 135, 165, 175, 180, 230, 231, 235, 240, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 360, 362, 670, 690, 1080, 1085, 3050, 3060, 3065, 3070, 3075, 3090, 3095, 3120, 3125, 3630, 3645, 3650, 3655, Replaces Massey Ferguson OEM number 183021M2, VPJ2801, Under Steering Arm, (Item #: 118285) $1.00

Steering Wheel - Steering wheel. For tractors: MF240 except Hydro Static Steering, MF250 Industrials: 20D, 30E. 15-3/4 inch diameter wheel with 11/16inch tapered and 40 splined hub. Does not include cap. Replaces 1691798M1, 1691798M2, 1673006M1, 3774839M91, 966461M1 (Item #: 153638, Ref: 1691798M1) $26.70

No
Picture
Steering Wheel, with Cap - 15 inch diameter, 7/8 inch 36 spline, 6-1/4 inch dish. For tractor models 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399. (Item #: 178277, Ref: 3595931M1) $36.10

Tie Rod - For UK built Massey Ferguson tractor models: 253, 263, 360, 362, 4225, 4235, 4240. This tie rod measures 29.250 inches from center of ball joint to end of rod. 1.025 inch rod diameter. Replaces 3475945M91, 3901824M91 (Item #: 105148, Ref: 3475945M91) $51.00

Tie Rod Complete - This Tie Rod Assembly is composed of: 1-3475945M91 Tie Rod End, 1-3475946M91 Tie Rod End, 359518JN Jam Nut, 1-359518 Tube, and hardware. It is used on 240, 253, 263, 360, 362 tractors with Hydrostatic Steering (Item #: 105147, Ref: 3595181M92) $206.00

Tie Rod End - For Massey Ferguson tractor models 253, 350, 360, Replaces Massey Ferguson OEM number 3475946M91, Dimension A : 4.620", Dimension B: M28 x 1.5 M Thread, (Item #: 105149) $35.20

Tie Rod End - For Massey Ferguson tractor model 360 (s/n 0997-later), Replaces Massey Ferguson OEM number 3427685M3, 427685M93, VPJ3154, Dimension A: 4.310", Dimension B: M24 x 1.5 RH Thread, (Item #: 105164) $44.60

No
Picture
Trunion Pin Support Shim - For Massey Ferguson tractor models 168, 185, 188, 243, 253, 261, 263, 265S, 285S, 290, 340, 342, 350, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 590, 675, 690, 698, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4315, 4320, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 50B, 3165, Replaces Massey Ferguson OEM number 505238M1, 898018M1, 0.28" wide, (Item #: 174120) $1.50

No
Picture
Trunion Pin Support Shim - For Massey Ferguson tractor models 168, 185, 188, 243, 253, 261, 263, 265S, 285S, 290, 340, 342, 350, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 590, 675, 690, 698, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4315, 4320, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 50B, 3165, Replaces Massey Ferguson OEM number 505240M1, 898019M1, Size: 1-29/32" x 2-5/8", Thickness: 0.034", (Item #: 174124) $2.47

U- Joint - For Massey Ferguson tractor models 360, 362, 375, Replaces Massey Ferguson OEM number 3427346M91, 3427346V91, Replaces Ford OEM number 4552009, 4625636, Replaces New Holland OEM number 9956514, 9959898, (Item #: 156165) $24.90

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Wheels

Cap - Hub Cap, front wheel, threaded outside 2-3/4 inch, with grease fitting. For front hubs with threaded recess. For tractors: MF250 with split rim 6.00 x 10, MF253 with 179MM high axle, MF270, MF282, MF283 except Brazil, MF290, MF360, MF375, MF383, MF390, MF398, MF399, MF670, MF690. Industrials: 20D fixed axle, 30E, 40E. For 1134, 1143, 1144, 1153, 1163, 1164, 1183. Replaces 882637M1, 882636M91 (Item #: 104975, Ref: 882637M1WF) $9.70

No
Picture
Front Axle Housing Bushing - For Massey Ferguson tractor models 261, 340 (4WD side drive front axle), 342 (4WD side drive front axle), 350 (4WD side drive front axle), 355 (4WD side drive front axle), 360 (4WD side drive front axle), 362 (4WD side drive front axle), 365 (4WD side drive front axle), 375 (4WD side drive front axle), 383, 390 (4WD side drive front axle), 390T (4WD side drive front axle), 393, 396, 398 (4WD side drive front axle), 399 (4WD side drive front axle), 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095 (4WD center drive front axle), 3630 (4WD center drive front axle), 3635 (4WD center drive front axle), 3645 (4WD center drive front axle), 3650 (4WD center drive front axle), 3655 (4WD center drive front axle), 3660 (4WD center drive front axle), 3670 (4WD center drive front axle), 3680 (4WD center drive front axle), 3690 (4WD center drive front axle), 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5425, 5435, 5445, 5455, 5460, 5465, 5470, 5475, 5480, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6614, 6615, 6616, 7465, 7475, 7614, 7615, 7616, 7618, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8245, 8250, 8260 Replaces Massey Ferguson OEM number 3426938M1, , Compatible with McCormick tractor models MB75 (4WD), MB85 (4WD), Replaces McCormick OEM number 3426938M1, Inside Diameter: 1.58", Outside Diameter: 1.73", Length: 1.57", (Item #: 173815) $13.20

Front Lug Nut - Used on Ferguson and Massey Ferguson models 1100, 1130, 135, 148, 150, 165, 168, 175, 178, 180, 202 Indust/Const, 203 Indust/Const, 204 Indust/Const, 205, 20D Indust/Const, 20F Indust/Const, 2135 Indust/Const, 250, 253, 255, 263, 265S, 270, 271, 275, 281, 282, 283, 290, 30E Indust/Const, 30H Indust/Const, 3165 Indust/Const, 340, 342, 35, 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 399, 40E Indust/Const, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50 Loader, 565 Combine, 575 Skid Steer Loader, 590, 65, 670, 675, 690, 765, 85, 90, F40, TE20, TEA20, TO20, TO30, TO35, the nut has 1/2 inch - 20 thread and is 1-1/16 hex head. Replaces 195489M1, 195490M1, S9512A. (Item #: 112060, Ref: 195490M1) $2.30

Front Rim - 4.50" x 16", 6 bolt, 6" circle, 4-5/8" pilot, 5.50 or 6.00 x tire. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 535448M91, 506020M91, 195638M91.1883335M3 Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

Front Rim - This is a 5.5 inch x 18 inch Front Wheel Rim. Used with 7.50 x 18 Tires. It has a pilot hole of 4.656 inches. It uses 6 bolts in a 6 inch bolt pattern. Verify size of old rim before ordering. Replace 3121425R91, 804711R91, K301046, K949731, 3121425R91, 83960329, C7NN1007B, 83918556, 81825697, 81820016, D1NN1007C, D8NN1007CA, 82005057, 82033932, E6NN1007CA, D4NN1007N, JD3211, AL82491, 3827583M91, 186319M91, 1861319M91 (Item #: 167680, Ref: FW55186) $138.00

Front Rim, 4.50 x 16 - Front wheel, with weight holes. 4.50 inch x 16 inch, 6-bolt, 6 inch bolt circle with 4.62 inch pilot for 5.50 inch or 6.00 inch x 16 inch tires. 2500 pound capacity. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 506020M91, 195638M91, 535448M91, R2055, and 1883335M3. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

$Massey Ferguson 360 Rear Rim Bolt - 5\8 inch x 2-7\8 inch$
Rear Rim Bolt - 5/8" x 2-7/8" - For Massey Ferguson tractor models 35, 65, 130, 135, 148, 165, 168, 175, 178, 185, 188, 230, 240, 250, 360, 2640, 3630, 3650, Compatible with Massey Ferguson Combine (s) 550, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 40E, 50E, 765, Replaces Massey Ferguson OEM number 828217M1, 180876M1, 703929R1, K611261, (Item #: 113970) $3.00

Rear Wheel Center - This Wheel Center is used with 1688674M91 Rim. Additional $20shipping due to weight. Replaces 1678718M1 (Item #: 178805, Ref: 1678718M1) $420.00

Rim 14x30 with 8 Loop - Rim, 14 inch x 30 inch de-mountable rim with 8 loop clamps. Add $30.00 extra shipping per rim due to weight. Replaces 1678716M91, 1688674M91, 1884726M91 (Item #: 178988, Ref: 1688674M91) $568.00

Spindle Tab Washer - This Tab Washer is used on Massey Ferguson FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, 130, 135, 148, 150, 165, 168, 175, 178, 180, 185, 20, 20B, 20C, 20D, 20E, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 30, 3165, 340, 342, 35, 350, 35X, 360, 375E, 40, 550, 565, 65, 765. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $1.50

No
Picture
Steering Cylinder Seal Kit - For Massey Ferguson tractor models 340, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, Replaces Massey Ferguson OEM number 3484807M1, (Item #: 173819) $29.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 1751403M1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

Wheel 12X28 - Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body Screw are drilled parallel to axle (not at angle). For tractors: For tractors: MF240, MF250, MF253, MF360, MF362. Additional $25 due to weight. (Item #: 103722, Ref: 1687615M91) $475.00

Wheel Hub - Hub assembly, front wheel, 6-hole. For tractors with heavy duty axles and UK models: MF165, MF250, MF255, MF270, MF290, MF362, MF670, MF690. For tractors with heavy duty axles: MF283, MF360, MF375, MF383, MF390, MF390T, MF393, MF398, MF399 industrials: 20D, 20F, 30E, 30 For 20D, 20F, 30E, 30H, 40E, MF165, MF250, MF255, MF270, MF283, MF290, MF360, MF362, MF375, MF383, MF390T, MF390, MF393, MF398, MF399, MF670, MF690 (Item #: 102495, Ref: 898346M93) $64.50

Wheel Hub - This wheel hub replaces 886337M1 for tractor models 135UK, 165UK, 168, 20D, 20E, 231, 240, 250, 253, 265, 275, 360, FE135, 550, 565. (Item #: 102491, Ref: 886336M1) $38.40

Wheel Stud - Front wheel stud. Measures 1.59 inches overall length and .930 threaded length. Threads are 1/2 UNF. These are #5 Steel per OEM specification and may come with a silver steel finish or a gold zinc finish. Fits TE20, TEA20, TO20, TO30, TO35, FE35, F40, 1100, 1130, 130, 135, 150, 165, 175, 180, 202, 203, 204, 2135, 250, 253, 255, 263, 270, 275, 281, 283, 290, 30, 3165, 340, 35, 350, 355, 360, 365, 375, 390, 4225, 4255, 4265, 50, 575, 590, 65, 675, 690, 85. (Item #: 108606, Ref: 181328M1) $1.30

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A. For the following tractors: 135, 148, 165, 168, 175, 178, 20B, 20D, 20E, 2135, 230, 231, 240, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30D, 30E, 340, 342, 35, 350, 352, 355, 360, 375, 375E, 383, 390, 390E, 393, 398, 40, 550, 565, 575, 590, 65, 670, 675, 690, 765, MHMustang, MHPacer, MHPony, MH101JR, MH101SR, MH102JR, MH102SR, MH20, MH22, MH30, MH33, MH44, MH44 Special, MH44-6, MH444, MH81, MH82 (Item #: 111560, Ref: 512581M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.20

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.80

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.90

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.90

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.40

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $97.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $22.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $28.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Massey Ferguson 360 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Ferguson 360 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Massey Ferguson 360 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 360 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Massey Ferguson 360 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Massey Ferguson 360 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Massey Ferguson 360 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.08

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.10

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Massey Ferguson 360 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.60

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.00

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.17

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $70.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $90.00

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $68.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $89.00

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.30

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $90.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.20

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $89.00

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $77.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $76.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $257.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.62

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $64.00

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $140.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $872.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $75.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $303.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $102.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $430.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $57.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $71.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $27.00

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.40

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $90.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $35.00

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $11.00

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $53.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $22.10

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.70

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $56.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $24.00

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $138.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.01

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $91.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $5.40

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $56.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $132.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $147.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $140.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00