Welcome! Please use the navigational links to explore our website.

Company Logo
(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Massey Ferguson 255 Tractor Parts

[ Show Pictures ]

[Categories]   [All Massey Ferguson Models]   [Print]  


Brakes
Brake Actuator - Wet Brake Systems - 9 inch. For tractor models 135, 165, 175, 180, (235 Orchard), 255, 265, 275, 285, 1080, 1085, 30, 31, 40. Replaces 1860963M91, 1860963M92. (Part No: 1860963M91)
$64.41

Brake Actuator for Dry Brake Systems - For tractor models 1080, 1085, 165, 175, 180, 255, 30, 40, (135, 235 both Orchard), (265, 275, 285, all serial number below 9A349239). Brake Actuating Assembly. (Part No: 535873M91)
$209.36

Brake Cylinder Repair Kit - This brake cylinder repair kit is compatible with the following tractor models: 1014, 1024, 1114, 1134, 235, 245, 250, 255, 260, 265, 274SK, 275, 290, 294S, 298, 560, 565, 575, 590, 592, 595, 675, 690, and 698. Services brake cylinder number 1698670M91. (Part No: S.42317)
$39.02

Brake Disc - Brake Disc is 8 7/8 inch outside diameter and 6 inch inside diameter, 27 splines. For tractor models 1080, 135, 165, 175, 180, 235, 255, 265, 275, 285, 30, 31, 40. Replaces 1805980M1. (Part No: 1044526M1)
$23.78

Brake Lever Bracket, Left Hand - Replaces 1860970M1. For tractor models 1085, 135, 165, 175, 180, 235, 245, 255, 265, 275, 283, 285, 30, 30B, 40, 40B, 4500, 50A, 50C, 6500. (Part No: 1860969M1)
$35.82

Brake Lever Bracket, Right Hand - Replaces 1667224M1, 1860972M2. For tractor models 1085, 135, 165, 165 UK, 175, 180, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 263, 265, 271, 275, 275 UK, 281, 282, 283, 283 UK, 285, 290, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D. (Part No: 847705M2)
$82.25

Brake Lever Return Spring - This Brake Lever Return Spring is use on multiple Massey Ferguson Tractors. It is 3 5/16 inches in length. It replaces original part numbers 533618M1, 517503M1, 184171M1, 1868691M1, 773222M1. (Part No: 773222M1)
$3.60

Brake Master Cylinder - For tractor models (235 German only serial number Z173013), (255 German only), (260 from 2/1980 and up), (265 serial number 193552 and up), 270, (275 serial number 221522 and up), (290 serial number 387020 and up), (298 German only), (30E Power Shuttle), 40E, 50E. Use DOT 3 or 4 brake fluid or a vegetable based brake fluid. Do not use a mineral based fluid. Replaces 1698670M91, 1698670M1 (Part No: 1698670M1)
$85.84

Brake Rod Seal - Brake Rod Seal MASSEY FERGUSON: seal, for brake pull rod, wet disc brakes. Fits into left and right lever brackets. Tractors: MF154-4S, MF174-4S, MF194-4, MF194-4F, MF245, MF250, MF253, MF254-4, MF255, MF265, MF270, MF274-4, MF275, MF282, MF283, MF285, MF290, MF294-4, MF298, MF670, MF690, MF698, MF699, MF1085. Industrials: 30D, 30E, 40E, 50D, 50E. Replaces 1667175M1. 1860959M1 (Part No: C5NN2N336A)
$3.42

Brake Shaft, Bushing - 1-3/8 inch x 1-1/2 inch x 1-7/16 inch. For tractor models TE20, TO20, TEA20, TO35, FE35, F40, 1080, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 35, 50. (Part No: 180801M1)
$3.08

Spring - Spring, actuator disc return for disc brakes on tractors, just over 1 inch long: MF154-4, MF184-4, MF235 orchard, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, to serial number V39466, MF375 to serial number V39466, MF383 to serial number V39466, MF390 to serial number V39466, MF398 to serial number V39466, MF399 to serial number V39466, MF670, MF690, MF698, MF699 Industrials: 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 50F Forklift: 4500, 6500. For the following tractors with cast iron axle: MF135, MF165, MF175, MF180 Industrials: 30, 31, 40, 50A. For 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50F, 6500, MF135, MF154-4, MF165, MF175, MF180, MF184-4, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, and more. (Part No: 1853148M1)
$2.48

Spring, Brake Lock - For tractor models 235 Orchard, 245, 255, 265, 275, 285, 20C, 30, 30D, 40, 40B, 50C, 50D. Replaces 181149M1, 181150M1, 181149V1 (Part No: 186441M2)
$3.25

Clutch
Carrier - Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Part No: 886727M4)
$10.85

Clutch Alignment Tool - Dual Stage Clutch Alignment Tool with 1 1/8 inch by 10 splines and 1 5/8 inch by 25 splines. For tractor models 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 175UK, 178UK, 180, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240P, 240S, 245, 253, 255, 261, 263, 265, 265S, 270, 271, 271X, 271XE, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290UK, 30, 30E, 3165, 35, 40E, 383, 390, 481, 670, 690, 50, 65, 97, TO35. (Part No: 1212-5955)
$12.27

Clutch Assembly, Dual 12 Spring - Uses 11 inch x 1-1/8 inch 10 spline main disc (NOT INCLUDED) and 9 inch x 1-5/8 inch, 25 spline captive PTO disc. For MF175 serial number 9A1308030>, MF255 late production with 254046 on cover casting, MF265. **An additional $25 will be added for shipping on this item (50 pounds). IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 532321M91)
$202.09

Clutch Assembly, Dual 9 Spring - Dual pressure plate, 11 inch, 25 spline PTO disc with 1 5/8 inch hub, medium spring type. (Part No: 532320M91)
$273.24

Clutch Disc - Clutch disc, 11 inch, 10-spline, 1-1/8 inch hub, damper springs, organic lining. For split torque single clutch in tractors: MF165, MF175, MF180, MF225, MF265. For MF165, MF175, MF180, MF255, MF265. (Part No: 513580M91)
$103.50

Clutch Disc PTO - 9 Inch, 1 5/8 inch hub with 25 splines. For tractor models 20C, 20, 30B, 30D, 30, 40B, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265 (Part No: 1043282M92)
$28.43

Clutch Disc, 11 Inch - 10 spline, 1.125 inch hub. For all MF tractors with 11 inch DUAL Clutch, EXCEPT for TO35: (to serial number 177394 and 177520 thru 177537); F40, MH50. Tractors: TO35 late production, 35, 50, 65, 135, 150, 165, 175, 180, M230, MF235, MF245, MF255, MF265, MH50, industrials: 20, 20C, 30, 30B, 30D, 40B.. Will replace 890302M91. (Part No: 516068M91)
$37.73

Clutch Disc, 11 Inch - 10 Spline 1.125 spline diameter. Feramic, solid. For tractor models 130, 135, 165, 175, 180, 20, 202, 203, 2135, 2165, 2200, 230, 245, 25, 255, 265, 290, 30, 302, 30B, 30D, 3165, 35, 40B, 50 serial number 515396->, 65, TO35 serial number 177395-177519 and 177538->. All with dual clutches. (Part No: 185892-RF)
$296.62

Clutch Fork Shaft, LH - This Clutch Fork Shaft is the left (long) side. It measures 1 inch in diameter by 5-17/32 inches long. It is used with: 180801M1 bushing, 886719M1 fork and 180449M1 RH shaft (each sold separately). Replaces 180444M1, 180444M2, 1679460M1 (Part No: 180444M1)
$10.35

Clutch Kit - Kit contains 11 inch 10 spline drive disc, 11 inch 25 spline heavy duty double pressure plate, pilot and release bearings, includes pilot tool. For tractor models 175, 175 U.K., 178 U.K., 255, 265. (Part No: 1212-1458)
$265.65

Clutch Kit, 11 inch - Kit contains 11 inch 10 spline rigid drive disc 516068M92, 11 inch, 1.5 inch hub with 25 spline double pressure plate, medium spring type 532320M91, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool part number 1212-5955. For tractor models 150, 165, 175, 175 UK, 178 UK, 180, 20C, 2135, 235, 245, 255, 265, 30, 30B, 30D, 3165, 35, 40B, 50, 65, 97. 56 Lbs. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1212-1465)
$268.37

Clutch Kit, 11 inch - Contains 526665M91 11 inch pressure plate with a 9 inch, 10 Spline Captive PTO Disk, 516068M93 11 inch, 10 spline with 1 1/8 hub clutch disc as well as a release bearing, pilot bearing and clutch alignment tool. For tractor models with Medium Tension Springs for regular agricultural use: 150, 165, 175, 175 UK, 178 UK, 180, 20C, 2135, 235, 245, 255, 265, 30, 30B, 30D, 3165, 35, 40B, 50, 65, 97. Additional $20.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1212-1417)
$241.43

Clutch Kit, 11 inch - Contains 526664M91 pressure plate with a 10 Spline PTO Disk, 516068M93 clutch disc as well as a release bearing, pilot bearing and clutch alignment tool. For tractor models with Heavy Tension Springs for Industrial use: 150, 165, 175, 175 UK, 178 UK, 180, 20C, 2135, 235, 245, 255, 265, 30, 30B, 30D, 3165, 35, 40B, 50, 65, 97. This Clutch Kit weighs 57 pounds. Additional $20.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1212-1426)
$243.83

Clutch Kit, 11 inch, Fine Spline - Kit contains 11" 10 spline rigid drive disc p/n 516068M93, 9" 1 3/4 hub PTO Disc. 11" 25, 1.625" spline double pressure plate-standard springs p/n 532319M91, pilot bearing is .669 I.D., 1.57 O.D.., .472 width and release bearing is 2.49 I.D., 4.06 O.D. and .870 width. Includes pilot tool. For tractor models 135, 150, 165, 175, 175 U.K., 178 U.K., 180, 20, 20C, 2135, 235, 245, 255, 265, 30, 3165, 35, 50, 65, 97, TO35. (Part No: 1212-1420)
$262.50

Clutch Release Bearing Carrier Spring - This Clutch Release Bearing Carrier Spring is used on many Massey Ferguson models. It is 2-1/8 Inch Overall Length. It replaces 1867690M1, 193334M1, 509230M2, 180451M1, 509230M2, 180451M2, 1867690M2. (Part No: 1867690M2)
$2.99

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Part No: 881144M1)
$3.24

Clutch Release Fork - For tractor models 1200, 135, 135UK, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250 Brazilian, 253, 255, 261, 265, 270, 275, 282, 283 Brazilian, 290, 292 Brazilian, 297 Brazilian, 298, 299 Brazilian, 30B, 30D, 30E, 30H, 35, 35X, 375E Brazilian, 390E Brazilian, 40B, 40E, 415 Brazilian, 425 Brazilian, 435 Brazilian, 440 Brazilian, 445 Brazilian, 460 Brazilian, 465 Brazilian, 475 Brazilian, 481 Brazilian, 492 Brazilian, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65. Replaces 886719M1, 184628M1 (Part No: 886719M1)
$56.88

Clutch Release Shaft - For tractor models 1200, 135, 135UK, 148, 165, 168, 175, 178, 178UK, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 290, 298, 30B, 30D, 30E, 30H, 35, 35X, 375E, 390E, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65, TO35, MH50. This Shaft is 1 inch diameter X 3 19/32 inches long. (Part No: 180449M1)
$7.13

Clutch Transmission Disc11 Inch - This is an 11 inch rigid disc with a 10 spline, 1.125 inch hub. It is used in single clutch and split torque clutches. 165, 175, 180, 202 Indust/Const, 203 Indust/Const, 2135 Indust/Const, 2200 Forklift, 2200 Gas, 2500 Forklift, 255, 265, 30 Indust/Const, 31, 3165 Indust/Const, 35, 40B Indust/Const, 4500 Forklift, 50C Indust/Const, 50D Indust/Const, 65 Replaces 189948M91, 513580M92 (Part No: 189948M91)
$94.09

PTO Disc, 9.055 - 9.055 inch rigid disc, organic, spline diameter 1.75 inch 10 spline. For tractor models 130, 135, 165, 175, 180, 20, 202, 203, 2135, 2165, 2200, 245, 25, 255, 265, 290, 30, 302, 30B, 30D, 3165, 35, 40B, 50 serial number 515396 and up, 65, TO35 serial number 177395-177519 and 177538 and above. All with dual clutches. Replaces 1034195M1, 1539020C1, 1753753M1, 1753753M94, 1753753M94-A, 181102M92, 1851652M92, 323022046, 323022047, 3620411-RF, 3620411-RO, 3620411M1, 3620411M91, 392492R91, 709640R92, 899823M91. (Part No: 323022047)
$29.01

Pilot Bearing - Clutch pilot bearing, heavy-duty, long lasting stainless steel. Bore: 0.670 inches (17mm), OD: 1.57 inches (39.88mm), 0.470 inches width. For tractors: MF50, MF65, MF85, MF88, MF235, MF245, MF255, MF285, MF1080 industrials: 20, 20C, 30, 30B, 31, 35 utility & turf, 40, 40B, 50, 50A, 50C, 202, 203, 204, 205, 302, 304, 2135, 2200. Replaces 832953M3, 1440487X1, 828123M1, 828123M2, 832960M3, (Part No: C5NN7600A)
$2.76

Pilot Bearing - For tractor models 1004, 1004T, 105, 1080, 1085, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 220, 2200, 230, 235, 240, 245, 25, 250, 253, 255, 260, 2620, 2625, 2640, 2645, 265, 2680, 2685, 270, 2720, 2725, 275, 282. Replaces OEM 828123M2. (Part No: C5NN7600A)
$2.76

Pressure Plate - Clutch pressure plate, external lugs for multi-power transmission, 3 required. For tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF290, MF298, MF375, MF390, MF398 industrial: 30. For 20D, MF135, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF35, MF50, MF65, TO35 (Part No: 185464M1)
$12.77

Pressure Plate, 11 - Remanufactured, with 1.406 inch flywheel step, 1.625 inch spline diameter, 25 spline. For tractor models 202, 203, 255, 30, 50D and these split torque models: 165, 230, 235, 245, 255, 265, 40B, 50C, 65. (Part No: 532323M91)
$299.92

Pressure Plate, 11 Inch - For 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Late production) (Part No: 1040884M1)
$146.87

Release Bearing - Sealed Release Bearing for single and dual clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 1080, 1085, 1100, 1130, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 2200, 220, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 282, 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35. Replaces original part numbers 892862M2, 892862M1, 86534551 and 195508M1. (Part No: N1585)
$20.49

Release Bearing - Used in single and dual clutches. For tractor models (FE35, 1080, 1085, 135, 135 UK, 150, 165, 165 UK, 175, 180, 20E, 235, 240, 245, 253, 255, 265, 270, 285, 30E, 30H, 31. It has an inside diameter of 2.49 inches, an outside diameter of 4.06 inches, and is .82 inches wide. Please verify measurements before ordering. (Part No: 833084M1)
$22.28

Release Lever - For tractor models 150, 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35. (Part No: 899818M2)
$12.33

Trans. Disc 11 - NEW, feramic, solid. 1.125 inch spline diameter, 10 spline. For tractor models 202, 202 Workbull, 203, 2135, 255, 30, 3165, 4500, 50D, and these split torque models: 165, 175, 180, 230, 235, 245, 255, 265, 40B, 50C, 65. (Part No: 526965-RF)
$129.44

Trans. Disc, 12 - Organic, rigid disc. Replaces 887889M94, 1.125 inch spline diameter, 10 spline. For tractor models 133, 135, 140, 148, 152, 155, 157, 158, 165, 168, 175, 177, 178, 188, 20, 20B, 20D, 20E, 20F, 20H, 230, 235, 240, 245, 250, 253, 255, 260, 265, 270, 275, 282, 283, 285, 290, 30, 30D, 30E, 30H, 40, 40B, 500, 50E, 550, 560, 575, 590, 670, 690. (Part No: 3599462M92)
$43.11

Cooling System
By-Pass Hose - Water Pump to Thermostat Housing hose for models: 165, 255, 30, 300 Combine, 302, 304, 40B, 50A, 65. (Part No: 747942M91)
$7.40

Fan - Outside diameter of 15 3/8 inches, 1 5/8 inch pilot hole, 4 mounting bolt holes 5/16 inch at 2 7/16 center to center across. Fits tractor models: 135 with Perkins gas or diesel engine, 150 with Perkins gas engine, 165 with Continental gas or diesel engine, 203 with direct injection diesel, 205 with direct injection diesel, 2135/diesel engine, 2200 with Perkins gas or diesel engine, 235 with diesel engine, 245 with diesel engine, 255 with AD4-203 diesel engine, 3165 with Continental gas or diesel engine. Replaces OEM part number 521031M91. (Part No: 194046M91)
$25.83

Fan Belt - For tractor models 150, 40B, 50C, 50D, MF255, MF265, MF275. (Part No: 517344M2)
$7.64

Fan, 6 Blade - 16.250 inch diameter, 1.625 inch pilot hole, 2.500 inch bolt hole centers. For tractor models (175 with Perkins Gas Engine), (255 diesel), (265 serial number up to 9A349239 gas or diesel). (Part No: 521269M1)
$60.47

Radiator - Radiator with oil cooler and 4.796 inch neck for MF tractors: (255 diesel with A4-236 engine, serial number <-9A282760)and (265 diesel, serial number <-9A282759). Core size: 15.125 inches wide, 18.875 inches high, 3 rows of tubes, 8 fins per inch. (Part No: 531981M94)
$303.98

Radiator - Radiator for MF 255 tractor with AD4-203 diesel engine. Core size: 15.125 inches wide, 18.875 inches high, 3 rows of tubes, 8 fins per inch. NOTE: Radiator Cap for this radiator is not stocked and a special order item, part number (RW002)-24. Call to order. (Part No: 531982M94)
$279.76

Radiator - This New Radiator is designed and built to precise dimensional specifications to ensure an exact fit. Each radiator has a stamped brass tank, undergoes a rigorous quality inspection, and is 100% leak tested. This radiator has 8 fins per inch and 3 rows of tubes. It is 19" tall, the core size is 15.125" wide, and the filler neck is 4.25". This radiator fits the Massey Ferguson Tractor 255 (with Perkins gas engine) and 265 (SN <9A349239 with Perkins gas engine). Uses 531505M91 Cap (not included) Replaces 531980M94, 531980M92 (Part No: 531980M94)
$283.12

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. Replaces 184528M1, 184528M91, 184528M1. Fits 135, 150, 165, 175, 180, 235, 240, 255, 35, 50, MH50, 65, 85, 88, TO20, TO30, TO35. (Part No: 180224M91)
$6.30

Radiator Cap - This Radiator Cap is used on Massey Ferguson Models: 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 270, 275, 283, 285, 290, 298, 30D, 30E, 375E Brazilian, 390E Brazilian, 50E, 50EX, 550, 560, 565, 575, 590. It Replaces 1874445V93, 1874445M94, 1874455M93, 1874445M93, 1874445M93 (Part No: 1874455M93)
$9.39

Radiator Cap - This Radiator Cap is for 3/4" neck radiators. 2.021 inch tab to tab``3.463 inch outside diameter of cover. It is 7 psi. Replaces 531505M91, 531505V91, 504224M91 (Part No: 531505M91)
$10.80

Radiator Hose Lower - Hose, radiator lower. For Perkins Gas Engines in tractors: MF165 serial number 9A67215 and up, MF175 serial number 9A67215 and up, MF255, MF265 gas. For MF165, MF175, MF255, MF265. (Part No: 520646M1)
$7.28

Radiator Hose WP To Block - Hose, inlet, water pump to block. For diesel tractors: MF65, MF165, MF255 with AD4-203 industrials: 30, 40B, 50, 50A, 302, 304, 3165. Replaces 747941M91. For 30, 302, 304, 3165, 40B, 50, 50A, MF165, MF255, MF65. Replaces U5MH0018, 747941M91, 7311174M1, 731174M1, 0201562 (Part No: 731174M1)
$7.35

Radiator Hose, Bottom - 1.50 inch inside diameter. For tractor models (168 with A4-236 engine), (175 diesel), (180 Perkins Gas up to serial number 67215), (185 with A4-248 engine), (255, 265, 275, 565, 575 diesel A4-236 engine). (Part No: 898748M1)
$10.05

Radiator Hose, Lower - Hose, radiator lower. For tractors: MF175 diesel, MF255 with A4-236 diesel, MF265 diesel except orchard. For 20, 202, 203, 204, 205, 2135, 35, MF135 (Part No: 194737M1)
$10.05

Radiator Hose, Lower - Hose, radiator lower. For Perkins 4-203 diesel engine in tractors: MF165 except with dual tricycle, MF255 industrials: 30, 3165. For 30, 3165, MF165, MF255 (Part No: 194739M2)
$11.43

Radiator Hose, Upper - For tractors: MF165 with Perkins Gas, MF175 with Perkins Gas or Diesel, MF255 Gas or A4-236 Diesel, MF265, MF275. Industrials: 30 Gas, 31. (Part No: 194736M1)
$12.21

Radiator Hose, Upper - Hose, radiator upper. For Perkins 4-203 diesel engine in tractors: MF165 except with dual tricycle, MF255 industrials: 30, 3165. For 30, 3165, MF165, MF255 (Part No: 194738M1)
$5.18

Thermostat - Replaces 2485668, 2485655, 248585, 2485639, 890991M91, 1446073M91, 1853245M1, 883471M91. Outside diameter 2.705. For tractor models 1100, 1130, 165, 165 UK with AD4.203 ENG, 220, 255, 30, 300, 302, 304, 3165, 40B, 410, 50, 50A, 60, 65, 765, Super 90. All with diesel engines. NOT FOR Hinomoto 2 Cyl. (Part No: 1446222M91)
$18.14

Thermostat Body - For tractor models 165, 165UK, 174-4S, 175, 175UK, 178, 180, 184-4, 255, 261, 265, 270, 274-4, 275, 275UK, 282, 283, 283UK, 285, 290, 290UK, 294-4, (374S, 374V, 384S, 394S all up to serial number D03066), 1745, 6500, 6530, 6830, 6830C, 6830FC, 6860, 6870, 6880, 7830, 7830C, 7860, 7870, 7880, 8500, 8530F, 8830, 8860, 8870, 8880, 24, 25, 30, 31, 50C, 50D, 50E, 50H, 60H, 6500, 6800H, 7500. Replaces 37762705. (Part No: 739379M3)
$46.40

Thermostat Body Cap - For tractor models 165, 175, 180, 24, 25, 255, 265, 270, 275, 283, 285, 290, 30, 31, 50C, 50D, 50E, 50H, 60H, 6500, 6500H, 6800H. Replaces 37735651. (Part No: 735312M1)
$43.00

Water Pump - Pump with pulley, for A4-203 or AD4-203 diesel engines in tractors: 65, 165, MF255; industrials: 30, 50, 302, 304. Replaces OEM numbers U5MW0061, 740611M91, 3637372M91, 731807M92, 41312167. This Pump will also fit IMT 459. (Part No: 3641250M91)
$57.26

Water Pump - With Pulley - With 1/2 inch diamter shaft. For A4-236 diesel & A4-248 diesel in tractors: 175, 180, MF255, MF265, MF270, MF275, and other with Perkins A4.212 (LA), A4.236 (LD), A4.248 (LF), T4.236 (LJ) Engines. Replaces 743064M91, 3637411M91, U5MW0104, 3641832M91, 3640565M91, 3641219M91, 3637411M91, 4131A029, 41312566, 41312568, 41312489, 41312567, 4131A021, 4131A013, 41312756, 41312743, 41312161, 41312323, 41312366, 41312733, 41312554, 41312551, 41312561, 41312564, 41313232, 41313225. (Part No: 3641219M91)
$50.37

Water Pump Gasket - This Gasket is for 3641250M91 and other water pump backplates. Fits models 1004, 1014, 1080, 135, 148, 165, 168, 174, 175, 178, 184, 185 BACKHOE, 188, 194, 230, 240, 250 SKID STEER LOADER, 254, 255, 265, 273, 274, 275, 283, 284, 285, 290, 293, 294, 340, 342, 35, 350 INDUST/CONST, 352, 355, 360, 362, 372, 373, 374, 375, 377, 383, 384, 387, 390, 393, 394, 397, 550, 560 COMBINE, 565 COMBINE, 575 SKID STEER LOADER, 590, 595, 675, 690, 698. Replaces 3638177M1, 4224122M1, 4224387M1, 731165M1. (Part No: 4224387M1)
$1.56

Water Pump Pulley for Diesel - Replaces 31146582. For tractor models 165, 255, 30, 302, 304, 3165, 356, 408, 40B, 50A, 65, all with diesel. (Part No: 731805M1)
$38.30

Water Pump without Pulley - For Massey Ferguson models with Perkins A4.192, A4.203, AD4.203 Engine. This is a new water pump less pulley. A single groove pulley is available as part number 731805M1. Replaces 747597M91, 3637372M91, 3637 372M91, 41312063, 41312511, 3641250V91, U5MW0055, U5MW0010, 3641312R91, 3641250M91, 3641250R91, 41312167, U5MW0061, 3641250R92, 41312574, 41312574T, (Part No: 739692M91)
$62.79

Water Pump, Less Pulley - For tractor models (165, 175, 255, 30 all with Perkins Gas Engine), (180 with Perkins Gas Engine serial number 236UA1732A and up). Replaces 740490M91, 740489M91, 37711070. (Part No: 743065M91)
$115.42

Water Pump, Less Pulley - Has a 3/4 diameter shaft. For tractor models (175, 180, 255, 265, 270, 275 all with A4-236 or A4-248 diesel engines), (178 with A4-248 diesel engine). Replaces 3640565M91, 3771630, 4131225, 743064M91. (Part No: 3637411M91)
$46.78

Water Pump, New - This New Water Pump comes gasket. It is used on some tractors and industrials with Perkins Engines: A4.212 (LA), A4.236 (LD), A4.248 (LF), T4.236 (LJ). Replaces 3641153M91, 3641361M91, 3638979M91, 3638980M91, 3640268M1, 2431154, 41312736, 4131A014, 4131A018, 41313228, 4222071V91, 41313204, 41313212, 4222071M91, U5MW0106, 41312736, 41313204, 41313228, 4131A035, 141313228, 4131A031. (Part No: 4222071M91)
$80.15

Decals and Emblems
Decal Set - Complete Decal Set(With Hump) for Massey Ferguson Model 255. (Part No: R2086)
$68.76

Decal Set, Hood - For model 255 with hump. (Part No: M609H1)
$43.26

Drive Train
8 Speed Constant Mesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application & availability. NOTE

8 Speed and Multi-Power Selector Parts (NON Synchromesh) - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application & availability. NOTE

Axle Bolt - Lock bolt for adjustable front axles. For tractors: F40, MH50, MF50, MF65, MF150, MF175, MF230 serial number 9A243032 and up, MF245 semi-swept, MF255, MF265, MF275 industrials: 20C, 30, 31, 3165 turf. Can replace 182501M1. Usable length 3-3/4 inch, equals 5-1/8 inch overall, 3/4 inch-16 thread. For tractor models MF1100, MF1105, MF1130. (Part No: 523387M1-L)
$10.35

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Part No: 195493M1)
$22.88

Bearing Cone - Cone (53177) for differential. For tractors: TO35 serial number 169467 and up MF50 using sleeve 181251M92 MF35, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275. 1.75 inch bore. 1.114 inch bearing width. (Part No: 195163M1)
$96.97

Bearing Cone - Cone (HM903249), for differential. For tractors: TO35 serial number 169467 and up, using sleeve 181251M93 MF35, MF65 serial number CL2686122 and up, MF165, MF180 using sleeve 190606M92 MF175, MF235, MF255, MF265, MF275. 1.750 inch bore, 1.125 inch bearing width. (Part No: 831888M1)
$25.99

Bearing Cup - Single cup (53375) for differential, two used. For tractors: MF35, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275. (Part No: 17392A)
$41.83

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Part No: 185778M1)
$17.94

Bearing Cup, Rear Axle, LH Inner - This Left Hand Bearing Cup measures 4.438 inch outside diameter and .938 inch width. Fits models 135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF50, MF65, TO20, TO30, TO35. (Part No: 195160M1)
$8.81

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Part No: 830735M91)
$28.12

Bearing, Mainshaft - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 serial number up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Part No: 338552X1)
$38.87

Bearing, Outer Input Housing - 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Part No: 886668M1)
$11.82

Bolt, Ring Gear to Case - 1/2 inch X 1 45/64 inch NF. 12 required. USE WITH NUT 891947M1. For tractor models 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 12 items. (Part No: 825776M1)
$2.63

Carrier Assembly - For Epicyclic Pinion Gear. Models: 135, 150, (155, 158, 165 with Multi Power), 175, 20, 202, 203, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, (265, 275, 285, 290 with Multi Power), 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 35 serial number 365360->, 360, 362, 375, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, (550, 565, 575, 590 with Multi Power), 65, 6500, 765 serial number 609714->, FE135 Coventry. (Part No: 897711M93)
$300.91

Center Tube - Tie rod tube, right hand, includes set screw and lock nut. 17-3/4 inches overall length. For adjustable front axle on tractors: 165, 168, 175, 185, 188, 255, 265, 270, 275, 282, 283, 290, 565, 575, 590, 675, 690. (Part No: 886801M91)
$46.13

Constant Mesh Transmission Gear - 42 teeth, 20 spline. For tractor models 135 Orchard, 165, 175, 235 Orchard, 245 Orchard, 250, 255, 265, 270, 275, 282, 283, 290 UK. (Part No: 1862422M1)
$100.66

Countershaft - 8 speed transmission, 17/20 spline, 15 tooth, 12.250 inches long. For tractor models 1085, 135, 150, 1505, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E. (Part No: 906472M2)
$115.38

Countershaft, Transmission, 17 Spline, 15 Teeth - Shaft is 12.25 inches long. For MultiPower Transmissions on: 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 235, 240, 245, 250, 255, 265, 270, 275, 285, 290, 298, 30, 35, 50, 550, 565, 575, 590, 65, 765, FE135, FE35. (Part No: 189391M92)
$242.69

Coupling, Rear Drive Shaft - 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Part No: 1680189M1)
$34.72

Crown Wheel & Pinion Set - Ring has 38 teeth, shaft has 11 teeth, 10 spline. Approximately 9 7/8 inch- 9 15/16 inch total length. For tractor models 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 200 Series, 20E, 20F, 2200, 235, 24, 240 serial number N01001-A20286, 245, 25, 250, 2500, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275 UK, 281, 282, 285S, 290 UK, 30, 302, 304, 30E, 30H, 31, 3165, 360, 362, 365, 375, 390, 399, 40, 40E, 4500, 50, 50E, 50H, 50HX, 60H, 65, 6500, 670, 6800H. (Part No: 1664255M92)
$438.18

Detent Plunger - This Detent Plunger is used on; 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces original part numbers 180418M1 and 180418M2. (Part No: 180418M2)
$3.47

Detent Plunger Spring - This Detent Plunger Spring is used with 180418M2 Detent Plunger. It is used on 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces 180417M1, 191221M1, 191221M2 (Part No: 180417M1)
$1.43

Differential Bearing and Cup - Fits in Differential Lock. Bearing and cup is used on multiple Massey Ferguson Tractors. Replaces original part numbers: 1850087M91, 1850087M92, 1851533M91, 1851533V91, 185773M1, 185775M1, 185776M1, 1857775M1, 1857776M1, 195159M1, 195159V1, 195160M1, 195160V1, 300975M1. (Part No: 195159M1)
$20.99

Differential Coupling Cap - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 6500H, 670, 6800H, 690, 698, 699, Super 90. (Part No: 898712M2)
$70.52

Differential Cover - For tractor models 135, 150, 165, 175, 180, 20E, 20F, 2200, 235, 245, 250, 2500, 253, 255, 265, 272, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 670, 690. Replaces 894781M3, 894780M92. (Part No: 3759150M1)
$139.38

Differential Lock Fork - For tractor models 1080, 135, 165, 175, 180, 20F, 220, 235, 24, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 320, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Part No: 906807M1)
$53.07

Differential Lock Fork Coupler - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Part No: 897003M3)
$62.32

Dipstick, Differential Oil Level - Verify length of 6 1/8 inches. For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30b, 30D, 30E, 360, 362, 375, 383, 390, 390T, 393, 398, 40, 40B, 40E, 50C, 50D, 50E, FE135 Coventry. Replaces 1665962M91, 1665962V91, 828810M91 (Part No: 1665962M91)
$4.26

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Part No: 886089M1)
$0.93

Drive Shaft Retainer Housing - For NON Multipower transmission. Fits 8 Speed transmission in: 135, 150, 165, 235, 240, 245, 250, 255, 265, 275, 383. Fits 8 or 12 speed transmission in: 360, 362, 375, 390, 390T, 398, 399. (Part No: 1693833M92)
$54.04

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Part No: 180445M1)
$20.46

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Part No: 180511M2)
$3.32

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Part No: 180582M1)
$1.59

Gear Shift Boot - Inside diameter top = 5/8 inch, inside diameter bottom = 1-11/16 inch, height 4-3/8 inch. For tractor models 35, 50, 65, 135, 150, 165, 175, 240, 250, 253, 255, 265, 270, 275, (283 8/1993 and up), 290, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698. Replaces 1694127M1, 1694127M3, 1694127M4. (Part No: 1694127M1)
$4.41

Gear Shift Boot - For tractor models 135, 135UK, 150, 165, 175, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 283UK, 285, 290, 298, 360, (375, 383, 390, 393, 396> serial number B06171), IND 20, 20C, 20D, 30, 31. Top hole 5/8 inch, bottom hole 2 inches. Replaces K929631. (Part No: 1678565M2)
$2.13

Gear Shift Boot - For tractor models TE20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, Super 90, 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 285. Top Hole 1/2 inch. Bottom hole 1 1/2 inch. (Part No: 520858M1)
$1.49

Gear Shift Knob - Hi-low shift knob, for shift levers with 3/8 inch NF threads. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285. (Part No: 1862399M1)
$2.46

Gear Shift Knob - 4-speed shift knob. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Part No: 532959M1)
$2.79

Gear Shift Knob, 6 Speed - 6 speed shift knob. Can replace plain knob & pattern label 1682623M1 & 1682630M1. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF135 UK, MF150, MF165, MF165UK, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Part No: 1862401M1)
$9.02

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Part No: 1861024M1)
$3.35

Gear, 1st - This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS/DIESEL, 282 MEX. (Part No: 1682688M1)
$68.42

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Part No: 180419M1)
$19.76

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Part No: 180415M1)
$23.30

Gear, 4th - 32 teeth, 18 spline, Replaces 1660095M1. For tractor models 1085, 135, 150, 165, 235, 240, 245, 255, 265, 275, 285, 390T. (Part No: 1683360M1)
$81.83

Gear, Reduction - 21 teeth, 39 spline. For tractor models 135, 150, 165, 175, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 6500, 6500H, 670, 6800H, 690. (Part No: 897005M1)
$113.39

Gear, Reverse - For tractor models FE35, MH50, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Part No: 183040M1)
$84.72

Gear, Transmission - 45 tooth, 20 spline. For tractor models 175, 270, 275, (240 constant mesh ratio 1.88), (290 Hi-Clearance), (165, 255, 265 Row Crops), (282 serial number up to 3K-D25608H), 20C Turf. (Part No: 906469M1)
$80.14

Gear, Transmission Pinion, 4th - 32 tooth. For tractor models (1085, 165, 235, 240, 245, 250, 255, 265, 270, 275, 283, 285, 298, 390T all with 8 speed transmission). (Part No: 1868010M1)
$129.97

Gearshift Lever - For tractor models FE35, 135UK, 150, 165, 175, 20D, 230, 235, 245, 255, 265, 275, 285, 30, 30E, 40, 40E, (20F SN# 50101A0192 and up). Replaces 891405M1, 194550M3. (Part No: 1673814M2)
$34.47

Gearshift Selector - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E, 50H. (Part No: 1862868M2)
$28.00

Gearshift Stop Plate - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Part No: 1860764M3)
$3.99

Input Housing Gasket - This Gasket replaces part numbers: ``188807M2, 512787M2 (Part No: 512787M2)
$1.41

Input Shaft - This Input Shaft is used in 6 speed transmissions. It is 13.730 inches long and has 26 teeth and 10 splines. It replaces original part number 1862423M3 (Part No: 1862423M3)
$124.20

Main Drive Pinion - For tractor models 148, 168, 175, 185, 188, 20C, 20D, 240, 250, 255, 265, 270, 275, 282, 285, 290, 565, 575, 165 STANDARD TRANSMISSION. Main Drive Pinion for 8 speed transmission. Pinion is a 24 tooth, 10 spline, 13.750 inches long. (Part No: 964925M3)
$146.10

Mainshaft - Multi power and 6 speed transmission, 18 spline, 12.250 inches long. For tractor models 1080, 1085, 135, 148, 150, 155, 159, 165, 168, 175, 180, 185, 188, 235, 240, 245, 250, 255, 265, 275, 285, 290, 30, 550, 565, 575, 590, (FE135 Coventry). Replaces 520701M3. (Part No: 1682542M1)
$114.07

Mainshaft - 8 speed transmission, 18 spline, 13.50 inches long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Part No: 1687643M1)
$106.03

Mainshaft, Heavy Duty, 8 Speed Trans. - 22 tooth, 18 spline, 13.375 inches long. Replaces 1870151M1, 1682448M1. For tractor models 1080, 1085, 135, 148, 155, 158, 165, 168, 175, 180, 185, 188, 240, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 50E, 50H, 550, 565, 575, 590. Replaces 1682448M1, 1870151M1. (Part No: 1687642M1)
$106.03

Multi Power Input Housing - This Multi Power Input Housing is used on 135, 150, 165, 175, 180, 1080, 1085, 235, 245, 255, 265, 270, 275, 285, 290, 298, 298, 670, 690, 698, ``30, 65, 35, 50. Replaces 1860889M1 (Part No: 1860889M1)
$126.74

Multipower Transmission & Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application & availability. NOTE

Oil Seal, Axle - Outer oil seal in rear axle housing, for tractors with wet brakes. For models: MF255, MF265 except Orchard, MF275, MF285. MF298, MF398, MF399, MF690 to serial number T1301043, MF698, MF699, MF1085 Industrials: 30, 30B, 30D, 31, 40, 40B, 50A, 50C, 50D. (Part No: 1860954M1)
$29.84

Pinion Shaft, Transmission - 17 teeth, 25 splines. For tractor models 135, 148, 150, 155, 158, 165, 168, 185, 188, 20, 20C, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D. Replaces 1868530M91. (Part No: 1868531M1)
$132.30

Planetary Cover Plate, Front - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Part No: 180408M2)
$14.94

Planetary Cover Plate, Rear - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Part No: 184012M4)
$18.11

Planetary Pinion Gear, (Epicyclic) - 12 tooth. For tractor models 135, 150, 165, 175, 178, 180, 203, 205, 20E, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 3165, 356, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50H, 5650, 60, 60H, 65, 6500, 6500H, 670, 6800, 690, 85, 88. (Part No: 894769M1)
$57.59

Planetary Ring Gear - 45 teeth. For tractor models 135, 150, 165, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30A, 30B, 30D, 30E, 30H, 31, 3165, 40, 40B, 40E, 4500, 50, 50C, 50D, 50E, 50H, 60, 60H, 6500, 670, 690. (Part No: 894772M2)
$291.79

Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Part No: 180446M1)
$14.13

Planetary Shift Lever - For 150, 165, 175, 230, 235, 245, 255, 265, 275, 285, 3165. Planetary Shift Lever. (Part No: 894796M1)
$48.02

Planetary Shifter Coupler - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 30E, 30H, 31, 3120, 3125, 3165, 356, 360, 362, 375, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 6500, 85, 88, Super 90, FE135 Coventry. (Part No: 184770M3)
$58.21

Rear Oil Seal - Rear axle or differential carrier plate oil seal. 3.198 inch outside diameter, 2.125 inch inside diameter, .812 inch width. For tractors: MF65, MF85, Super 90, MF135 orchard, MF150, MF165, MF175, MF180 industrials: 30, 40, 50, 203, 205, 302, 304 also MF1080, MF1085, MF235 orchard, MF255, MF275, MF285 with dry brakes. Used as clutch bearing support assembly seal on tractors: MF2675, MF2705, MF2745, MF2775, MF2805. For 10, 126, 130, 220, 224, 228. (Part No: 832954M3)
$13.19

Seal, PTO Pinion Shaft Retainer - This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Part No: 1860867M3)
$5.99

Seal, Rear Axle, Inner - 3.375 inch outside diameter, 2.350 inch inside diameter, .890 inches wide. For tractor models 1080, 150, 165, 175, 178, 180, 30, 31, 40, (135, 235 Orchards), (1085, 255, 265, 275, 285 all with Dry Brakes). (Part No: 894782M2)
$17.79

Shift Fork, 1st, Reverse, 2nd & 3rd - For tractor models FE35, F40, MH50, TO35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 202, 203, 204, 205, 2135, 2200, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 30, 31, 3165, 35, 50, 65. (Part No: 180437M1)
$38.58

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Part No: 897065M2)
$19.99

Shift Fork, 8 Speed - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20E, 20R, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H. Shift Fork replaces 1862139M1. For 8 Speed. (Part No: 1860773M1)
$48.99

Shift Lever Locking Pin - This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Part No: 1678440M1)
$0.83

Shift Rail, 1st & Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Part No: 1678867M1)
$38.25

Shift Rail, 3rd - Replaces 1678865M1. For tractor models 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 31, 40, 40B, 50C, 50H, 50E. (Part No: 1678864M1)
$38.11

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Part No: 9N4131)
$.39

Sleeve & Seal Kit - Rear axle or differential carrier plate oil seal, & speedi-sleeve. For tractors: MF65, MF85, Super 90, MF135 orchard MF150, MF165, MF175, MF180 industrials: 30, 40, 50, 203, 205, 302, 304 also MF1080, MF1085, MF235 orchard, MF255, MF275, MF285 (Part No: 832954M3SK)
$62.54

Transmission Input Shaft - 10 spline. For tractor models 1080, 1085, 150, 165, 175, 180, 255, 265, 275, 285, 65, 30. Replaces 516523M91, 516523M92 (Part No: 516523M91)
$171.89

Tube & Socket Assembly - Tie rod tube with end, right hand, inner, includes clamp. 20.125 inches to center of post, .75 inch inside diameter. For adjustable front axle on tractors: MF165 except LP, MF175, MF255, MF265 except Orchard, MF275 Industrials: 30 Turf, 3165 Turf. For 30, 3165, MF165, MF175, MF255, MF265, MF275. (Part No: 1028264M91)
$30.41

Electrical System
Alternator - 12 volt, 63 amp. 3 pin. Will replace a 2 pin as the 3rd pin is an accessory. For tractor models (740, 750, 760 1972-73 with 354 dsl), (230 1976-81 with Z145 gas), (230 1975-76 with 152 dsl), (235 1975-76 with Z145 gas), (235 1974-76 with 152 dsl), (245 1977-81 with Z145 gas), (255 1974-76 with 203 dsl), (1974-75 with 212 gas), (265 1974-75 with 236 gas or 1974-76 with 236 dsl), (275 1974-76 with 248 dsl), (285 1973-74 with 236 gas), (285 1973-76 with 318 dsl), (295 1979-82 with 318 dsl), (1085 1973-76 with 318 dsl), (1105 1971-76 with 354 dsl), (1135 1971-76 with 354 dsl), (1155 1974-76 with 540 dsl), (1155 1971-73 with 510 dsl), (1505, 1805 1974-76 with Cat. 3208 dsl). Replaces 1100581, 1100936, 1103117, 1100588, 1100578. (Part No: ADR0239)
$71.69

Alternator - 12 volt, 55 amp. For tractor models (154 1986-89), (184 1986-89 with 236 dsl), (194, 194-4 1993 on), (240 1983-99 with 152 dsl), (243 1999-00), (245 1977-82 with 152 dsl), (250 1983-86 with 152 dsl), (253 1988-99 with 152 dsl), (254 1982-87 with 152 dsl), (255 1977-82 with 236 dsl), (260, 263T 1993 on), (300 1987-on), (360 1986-92 with 152 dsl), (364 1989-93 with 152 dsl), (365 1990-96), (373 1990-96), (374 1989-99 with 236 dsl), (375 1986-98 with 236 dsl), (377 1987-96), (383 1986-89 with 248 dsl), (384 1989-92 with 236 dsl), (387 1987-92), (390 1993-98 with 248 dsl), (390 1987-92 with 248 dsl), (390T 1989-98 with 236 dsl), (393 1992-94 with 236 dsl), (394 1989-93 with 248 dsl), (396 1992-98), (397, 397T 1989-96), (398 1987-97 with 236 dsl), (399 1987-98 with 354 dsl), (699 1984-86 with 354 dsl). Replaces 24157. (Part No: ALU0024)
$96.53

Alternator - 12 volt, 72 amp. For tractor models (230, 245 1977-82 with gas and dsl), (255, 265 1977-82 with 236 dsl), (275 1977-82 with 248 dsl), (285 1977-82 with 318 dsl), (295 1979-82 with 318 dsl), (1085 1977-78 with 318 dsl), (1105, 1135 1977-78 with 354 dsl), (1155 1977-78 with 540 dsl), (1505 1977-78 with 3208 dsl), (1805 1977-78 with 3208 dsl), (2675, 2705 1981-84 with 354 dsl), (2775, 2805 1981-84 with 640 dsl), (2810, 2830 1982 with 354 dsl, (2850, 2870, 2890 1982 with 540 dsl). Replaces 1102921, 1102920, 1103116, 1103133. (Part No: ADR0133)
$64.79

Alternator - 12 volt, 55 amp. For tractor models (230 up to serial number 9A349238), (245 serial number 9A349239 and up), (255 diesel), 30, 30D, 40U, (50C serial number 9A324304 and up), (6000 1974 to 1975), 750, (760 up to serial number 1746009412). (Part No: 579880M91)
$102.26

Electronic Ignition Conversion Kit -12V Negative Ground - For 35, F40, 50 all with Cont Z134 engine & Delco (D)1112643 dist, MF65 with Cont G176 engine & D1112644 dist, 135 Spec with Cont Z145 with D1112643 dist, 135/150 with Cont Z145 & D1112644 dist, 165 with Cont G176 engine & D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine & D1112458 dist, MF265/MF285 with Perkins AF4-236 engine & D112693 dist. Also works with H-260 Continental Engine.Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For use on 12 volt neg grnd system only. Never change points again. Easy to install. Increase spark plug life and horsepower. Improve fuel economy. (Part No: 1145A)
$88.95

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p/n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For tractor models 165 with Cont G176 engine & D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine & D1112458 dist, MF265/MF285 with Perkins AF4-236 engine & D112693 dist. Also works with H-260 Continental Engine. (Part No: 91145A)
$126.39

Fuse Holder - Fuse Holder, chassis mount with threads for securing nut. For tractor models 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285 Industrials: 20, 30, 40, 31, 20C, 30B, 40B, 50C, 3165. Replaces 506063M91. (Part No: 522462M91)
$14.51

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 186216M91, 186216M91, 506063M91, 522462M91 (Part No: 376852R91)
$11.25

Ignition Switch - This ignition & starter switch with keys, has 3 terminals. For gas tractors: 50, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 1100, 1130, 1500, 1800 industrials: 20, 20C, 30, 30B, 40, 2135, 2200, 3165 combine: 410 skid steer loader: 811. For 1100, 1130, 135, 1500, 150, 165, 175, 1800, 180, 20C, 20, 2135, 2200, 230, 235, 245, 255, 265, 30B, 30, 3165, 40, 410, 50, 811. Replaces 194747M91, 194747V91, 194747M1, PASC780 (Part No: 194747M91)
$25.32

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Part No: 181140M94)
$12.72

Neutral Safety Switch Boot - For tractor models: 35, 40, 50, 65, 85, 175, 180, 230, 235, 245, 255, 265, 275, 285, 20, 20c, 30, 30B, 30D, 31, 40, 40B, 50, 50A, 50C, 50D, 60, 2135, 3165, 22, 2500, 4500, 6500, 88, 135, 150, 165, Super 90, 202, 203, 204, 205, 302, 304. (Part No: 180776M1)
$9.85

Stabilizer Pin Nuts, Pack of 5 - This Stabilizer Pin Nut is used with 521006M1 Pin. It is 3/4 16 UNF Right Hand Thread. It replaces original part number 3609473M1, 186809V1, 186809M91, 767743 (Part No: 186809M1)
$10.35

Starter - This is a Cold Climate starter if replacing a 968856M1 or 1680065M1. Right hand mount. For MF 35, 65, 135, 145, 155, 165, 230, 235, 240, 245, 250, 253, 254, 255, 350, 360, Ind 20D, 20E, 20F, 30E, 30H, 40E, 50. Starter, Lucas type used with Perkins A3.152, AD3.152, A4.203 $ AD4.203. (Part No: S.41137)
$274.64

Starter Assembly, New - 12 volt, diesel, 10 teeth, 2.7KW. For tractor models MF30, MF50, MF165, MF174, MF174C, MF194, MF265, MF270 MF275, MF285, MF290, 6500, 7500, 8500. Replaces Lucas, 26413, 27411, 27433, 27539, 26410 LRS190R, 26412, 26412R, LRS190, 27432, 26264, 26154, 26264R. 1680065R3, 1680065M3, 1680065M1, 26264R, 26412R, 27432R, 3.93E+07, 26412, 26220, 3597371M2, 3597426M3, 3597426M2, 968856M1, LRS190R, 3930505R1. (Part No: 1868285M3)
$122.75

Starter Drive - For tractor models Super 90, 1100, 1130, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 50, 85, 88, TO35 GAS OR DIESEL, 750 serial number 1696157>, (850, 860 ALL WITH DELCO STARTER 1113676), (203, 205, 410, 510, 540, 550, 760 ALL WITH PERKINS ENGINES). Starter drive used with starters 1113402, 1113672, 1113391. Replaces 1755245M1. (Part No: 1755245M1)
$27.43

Starter Solenoid - Solenoid Assembly, flange mounting to starter. Replaces Delco 1114356 on starters 1108649, 1107503, 1107512, 1108649. Gas and diesel applications. 12-volt. Replaces 1025381M91, 1047083M91, 1755027M91. (Part No: 1047083M91)
$10.13

Starter Switch - For tractor models 1080, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 165, 175, 180, 2135, 230, 235, 245, 255, 265, 275, 285, 50, all with Perkins Diesel Engines. Starter Switch. 2 Prong. Includes 2 keys. (Part No: 504809M1)
$25.35

Switch, Lamp & Horn - Lucas type. Used on 135, 148, 165, 168, 175, 178, 185, 188, 230, 235, 240, 245, 250, 255, 265, 275, 290, 298, 35, 35 Gas / 35 Petrol, 35X, 375E Brazilian, 390E Brazilian, 50, 50E, 50EX, 565, 575, 590, 65, 765. Replaces 882283M1, 54033364, 34952 (Part No: 1502378C1)
$17.76

Voltage Regulator - Internal voltage regulator for MF/Delco alternators on tractors: MF230, MF235, MF245, MF255, MF265, MF275, MF285, MF1085, MF1105, MF1135, MF1155, MF1500, MF1505, MF1800, MF1805, MF2675, MF2705, MF2745, MF2775, MF2805 industrials: 20C, 30B, 30D, 40B, 50C. Replaces 1039664M1 & Delco 1116387. For 20C, 30B, 30D, 40B, 50C, MF1085, MF1105, MF1135, MF1155, MF1500, MF1505, MF1800, MF1805, MF230, MF235, MF245, MF255, MF265, MF2675, MF2705, MF2745, MF275, MF2775, MF2805, MF285 (Part No: 1052023M91)
$7.15

Engine Bearings
Main Bearing Set - Available in STD, .010, .020, .030 For 165, 255 with Perkins G4.212 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-830AL)
$30.71

Main Bearing Set, 4.236 Diesel, .010 - .010 Main Bearing Set, 4.236 4 Cylinder Diesel Engine. For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275, 285 engine serial number U123424L>, 290 engine serial number U123424L>, 3065 engine serial number U106655N>, 3370 engine serial number U106655N>, 50, 50B, 50C engine serial number UA103064L-U106654N, 590 engine serial number U123424L>, 698 engine serial number U106655N>, 6000. (Part No: 81558A)
$23.87

Main Bearing Set, 4.236 Diesel, .020 - .020 Main Bearing Set, 4.236 4 Cylinder Diesel Engine. For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275, 285 engine serial number U123424L>, 290 engine serial number U123424L>, 3065 engine serial number U106655N>, 3370 engine serial number U106655N>, 50, 50B, 50C engine serial number UA103064L-U106654N, 590 engine serial number U123424L>, 698 engine serial number U106655N>, 6000. (Part No: 81558B)
$21.74

Main Bearing Set, 4.236 Diesel, .030 - .030 Main Bearing Set, 4.236 4 Cylinder Diesel Engine. For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275, 285 engine serial number U123424L>, 290 engine serial number U123424L>, 3065 engine serial number U106655N>, 3370 engine serial number U106655N>, 50, 50B, 50C engine serial number UA103064L-U106654N, 590 engine serial number U123424L>, 698 engine serial number U106655N>, 6000. (Part No: 81558C)
$24.26

Main Bearing Set, 4.236 Diesel, Std. - Standard Main Bearing Kit. For 4.236 4 Cylinder Diesel Engine. For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275, 285 engine serial number U123424L>, 290 engine serial number U123424L>, 3065 engine serial number U106655N>, 3370 engine serial number U106655N>, 50, 50B, 50C engine serial number UA103064L-U106654N, 590 engine serial number U123424L>, 698 engine serial number U106655N>, 6000. (Part No: 81558)
$18.42

Main Bearing Set, Perkins 203 Diesel, .010 - Bearing set .010 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Part No: 745406M91)
$16.50

Main Bearing Set, Perkins 203 Diesel, .020 - Bearing set .020 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Part No: 745407M91)
$18.15

Main Bearing Set, Perkins 203 Diesel, .030 - Bearing set .030 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Part No: 745408M91)
$18.15

Main Bearing Set, Perkins 203 Diesel, STD - STANDARD bearing set for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Part No: 745405M91)
$16.50

Main Bearings .010, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesl), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Part No: 735169M91)
$18.00

Main Bearings .020, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Part No: 735170M91)
$19.80

Main Bearings, .030, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Part No: 735171M91)
$19.80

Main Bearings, STD, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Part No: 735168M91)
$18.00

Rod Bearing Set, 152 Diesel, .010 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036A)
$10.19

Rod Bearing Set, 152 Diesel, .020 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036B)
$10.19

Rod Bearing Set, 152 Diesel, .030 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036C)
$9.55

Rod Bearing Set, 152 Diesel, Std - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036)
$10.19

Rod Bearing Set, Perkins 203 Diesel, .010 - Bearing set .010 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Part No: 737067M91)
$14.70

Rod Bearing Set, Perkins 203 Diesel, .020 - Bearing set .020 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Part No: 737068M91)
$14.70

Rod Bearing Set, Perkins 203 Diesel, .030 - Bearing set .030 for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Part No: 737069M91)
$14.70

Rod Bearing Set, Perkins 203 Diesel, STD - Bearing set STANDARD for Perkins A4-203 and AD4-203 Diesel Engines in tractors: 65, 165, 255. INDUSTRIALS: 300, 302, 304, 30, 3165, 356, 40B, 50. (Part No: 737066M91)
$16.29

Rod Bearing, 212 Gas - Single rod bearing available in Std, .010, .020, .030. For tractor models 165, 255 with Perkins G4.212 gas engine. (Part No: CB-667AL)
$7.47

Rod Bearings .010, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings complete kit. 4 Pair. (Part No: 736951M91)
$14.70

Rod Bearings .020, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings complete kit. 4 Pair. (Part No: 736952M91)
$14.70

Rod Bearings .030, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings complete kit. 4 Pair. Replaces 3118138R1, 736953M91, 85042C, 033 - 2384, 2192081, 70251359, U5ME0002C, CB-667AL-030, CB667AL. (Part No: 736953M91)
$14.70

Rod Bearings, STD, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings complete kit. 4 Pair. Standard. (Part No: 736950M91)
$14.70

Thrust Washer Set - 4 Pieces - FOR AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 31137211_21)
$6.38

Thrust Washers - Set of 4 Halves - FOR AD3.152 Perkins Diesel. Engine serial number 8504190> with offset tab and Perkins 6.354 Diesel Engine. Replaces 31137551/61. Set of 4 halves, makes 2 complete thrust washers. (Part No: 31137551)
$8.72

Engine Gaskets
Crankshaft Seal, Front, Lip Type, Perkins 236 & 248 Diesel - For tractor models 31, 6500, 175, 180, 255, 265, (275 engine serial number prefix 248UA or LF---N or LF---U only, (290, 294-4, 690 engine serial number prior to LF---U839080J) all with 236 and 248 CID Direct Injection Perkins Diesel. Injectors at angle in cylinder head. (Part No: 1447690M1)
$9.00

Crankshaft Seal, Rear Rope Type, Perkins - Fits 152 CID 3 cylinder, 203 CID 4 cylinder gas or diesel engines. Sold in a package of 2. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255. (Part No: 735866M1)
$3.27

Crankshaft Seal, Rear, Lip Type, Perkins - Used on Perkins Engines AG3-152, AD3-152, AD4-203, A4-236, A4-248, A4-318. For tractor models 135, 150, 20, 40, 2500, 230, 235, 4500, 200B, 245, 20C, 30B, 250 with engine serial number prefix CE22488U or CE31089U, 65, 165, 255, 30, 40B, 50, 302, 304, 356, 3156, 300, 175, 180, 265, 31, 6500, 275 with engine serial number prefix 248UA or LF---N or LF---U, 290 early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, 285, 1080, 1085, 540. (Part No: 1447049M91)
$17.49

Crankshaft Seal, Rear, Rope Type, Perkins - For tractor models late 165 w/AG4-212UA , 175, 180, 255, 265, 275, 31, 50C, 6500 all with 236 or 248 CID Direct Injection Perkins Diesel. Injectors at angle in cylinder head. Price shown is for each, sold only in multiples of 2 items. OEM numbers 735942M91, 731626M1, 4224056M1, and 36883108. (Part No: 735942M1)
$4.60

Crankshaft seal, Front Lip Type, Perkins - Fits 152 CID 3 cylinder or 203 CID 4 cylinder gas or diesel engines. For tractor models 2500, 20, 40, MF135, MF150, 203 and 205 to serial number 659002115, 35, FE35, MF35, MF50, 2135, MF235 engine serial number ending in D, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, 40B, 50, MF165, MF255. (Part No: 1851747M1)
$7.86

Front Cover To Timing Gear Housing Gasket - Price shown is for each, sold only in multiples of 2 items. For tractor models 165, 1745, 175, 180, 184-4, 220, 24, 25, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 300, 3050, 3060, 3070, 31, 362, 375, 383, 390, 670, 6800H, 6830, 6830C, 6830FC, 6860, 6870, 6880, 690, 7830, 7830C, 7860, 7870, 8530F, 8830, 8860, 8870, 8880. Replaces 36813137. ** Must be ordered in qty of 2, price is for 1. (Part No: 734887M1)
$12.57

Gasket Set, Engine Bottom, Perkins 236 and 248 Diesel - For tractor models 31, 50C, 6500, 175, 180, 255, 265 (275 with engine serial number prefix 248UA or LF---N or LF---U ONLY), all with A4-248 Direct Injection Perkins Engine. Engine Bottom Gasket Set. Does not include Crankshaft Seals. Use with top set part number 3638661M91. (Part No: 747191M91)
$44.39

Gasket Set, Engine Top, Perkins 203 Diesel - For the following using AD4-203 Direct Injection Perkins Diesel Engine (Injectors at angle in head). Tractors: 65, 165, 255. Industrials: 30, 40B, 50, 302, 304, 356, 3165 Engine Top Gasket Set. Does not include Crankshaft Seals. NOT for engines with DL in serial number ending. (Part No: 735349M91)
$33.75

Gasket Set, Engine Top, Perkins 236 and 248 Diesel - Gasket Engine Top Set. For (175, 180, both with engine serial number prior to 236UA109215L), (255 and 265 serial number 236UA109215L and up), (275 with engine serial number prefix 248UA or LF---N or LF---U Only), all with A4-248 Direct Injection Perkins Engine. Engine Top Gasket Set. Does not include crankshaft seals. Use with bottom set part number 747191M91. (Part No: 3638661M91)
$51.49

Gasket Set, Top - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: U5LT0038)
$38.26

Head Gasket - Head Gasket for head with injectors at angle in head. For tractor models (165, 255, 300, 302, 304, 3165, 356 engine serial number 2939036 and up), (365 engine serial number less than 2939035 not ending in DL), (30, 40B, 50 engine serial number 29C1085 and up), 65. Perkins AD4.203. Replaces VPA4316, 3641182M1, 3681E023, 36812126, 744391M1. (Part No: 36812138)
$27.39

Head Gasket Set - For 165, 255 with Perkins G4.212 Gas Engine (Part No: HS85202)
$142.36

Lower Gasket Set - Bottom set, 203 CID Four Cylinder Perkins Diesel Engine serial number 29C1084 and up. For tractor models 300, 302, 304, 30, 3165, 356, 40B, 50, MF165, MF255, MF65. (Part No: 745987M91)
$19.79

Oil Pan Gasket Set - For tractor models 165, 255 with Perkins G4.212 Gas Engine. (Part No: OS85202)
$27.95

Oil Pan Gasket, Perkins - Oil pan gasket. For tractor models 31, 50C, 6500, MF175, MF180, MF255, MF275, MF290, MF294-4, MF690. (Part No: 3638519M1)
$9.65

Oil Pan Gasket, Perkins 152 Gas or Diesel - Oil pan gasket. For 20, 200B, 203, 205, 20C, 2500, 30B, 35, 40, 4500, FE35, MF135, MF150, MF230, MF235, MF245, MF35, MF50. (Part No: MF3152PG)
$7.04

Oil Seal - For tractor models 30, MF1085, MF255, MF265, MF275, MF285. (Part No: 833355M1)
$8.14

Seal, Front - FOR AD3.152 Perkins diesel, AT6.354 and A6.354. Replaces: VPC5102, VPC5103, 02100004, 1446853M1, 1447690M1, 2413F436, 2415361, 7701031630, 810742, 812280. (Part No: 2418F436)
$9.47

Seal, Rear Main - FOR AD3.152 and 6.354 Perkins Diesel Engines. 5.394 inch X 6.260 inch X .433 inch. 303158411 (Part No: 1447049M91)
$17.49

Timing Gear Cover Gasket - For tractor models 1100, 1130, 165, 255, 30, 300, 302, 304, 3165, 356, 40B, 50, 50A, 65. Replaces 36813114. Price shown is for each, sold only in multiples of 5 items. (Part No: 735848M1)
$8.57

Timing Gear Housing Gasket - This timing gear housing gasket is for tractor models 165, 1745, 175, 180, 194-4, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 3070, 31, 375, 383, 390, 50C, 50D, 50E, 50H, 60, 6500, 670, 6830, 6830C, 6830FC, 690, 7830, 8530F. Replaces 36814127, 36814123. Price shown is for each, sold only in multiples of 2 items. (Part No: 742474M1)
$11.13

Upper Gasket Set - For tractor models (165, 255, 300, 302, 304, 3165, 356 all with engine serial number 2939036 and up), (30, 40B, 50 engine serial number 29C1085 and up), (365 up to engine serial number 2939035 not ending in DL), 65. All with AD4.203 Perkins Engine. U5LT0069 (Part No: 735349M91)
$33.75

Valve Cover Gasket - This gasket is used on multiple Massey Ferguson models with Perkins 212, 236 and 248 4 cylinder Perkins Diesel Engines. It replaces original part numbers 21826363, 3638461M1, 3638482M1, 36811114, 36811122, 36811126, 36811131, 36811132, 36811133, 3681A011, 3681A026, 3681A027, 4223924M1, 746714M1, 748277M1 (Part No: 737225M1)
$5.63

Valve Cover Gasket - This Valve Cover Gasket if for Perkins AD4.203 Direct Injection Diesel Engine. It replaces part numbers 732821M1, 732821M2, 732821Z1, 36811112 (Part No: 732821M1)
$4.61

Valve Seals - Valve seals for AD3. 152 Perkins Diesel. With engine serial number less than 2820092. Replaces 1447019M1, 33817125, 33817402, 3637041M1, 733820M1, 736840M1, 740009M1. Price shown is for each, sold only in multiples of 6 items. (Part No: 33817117)
$.98

Engine Rebuild Kits
Basic Engine Kit, Perkins 203 Diesel - For tractor models 300, 302, 304, 3165, 40B, 50, 65, 165, 255 with AD4-203 Direct Injection Perkins Diesel, 3.6 inch standard bore, (Injectors at angle in cylinder head), valve spring count can vary, check cylinder head when disassembling. Kit used on engine serial number 29C1084 and up. For engines using lip type rear seal or 2 piece rope type seal. Kit contains cast sleeves (.150 flange thickness, pistons, rings, pins, retainers, pin bushings, gasket set and crankshaft seals. Engine bearings and thrust washers must be ordered separately. (Part No: BEKP2467-LCB)
$315.22

Basic Overhaul Kit, Perkins 236 Diesel - 236 CID 4 Cylinder Diesel Engine, 3.875 inch standard bore, injectors at angle in cylinder head. Basic Engine Kit. Contains sleeves, pistons and rings, pins and retainers, pin bushings, gasket sets, and crankshaft seals. For 50C, 6500, MF255, MF265. Bearings and thrust washers must be ordered separately. Please see "engine bearings". (Part No: BEKP2178-LCB)
$418.10

Engine Major Overhaul Kit - For 65, 165, 255, 300 Combines, 30, 40B, 50, 302, 356, 3165 Shovel Tractor, all engine serial number 29C1085>, D4.203 Diesel, direct injection, 4 cylinder, lip seal, 3.602 inch bore. Engine Major Overhaul Kit includes piston liner kit, main bearing set, connecting rod bearing/bushing/bolt set, thrust washer set, crank seal set, valve train kit, cam bushing set and gasket set. When ordering, specify in comments section bearing size of standard, .010, .020 or .030. (Part No: OK434)
$409.16

Engine Overhaul Kit - For 65, 165, 255 with engine serial number 29C1084 and up using AD4-203 Direct Injection Perkins Diesel with injectors at angle in cylinder head and engines using 2 piece rope type rear seal and with .150 inch flange wall thickness. Basic Engine Overhaul Kit. Contains Sleeve and Piston Kit: sleeves, pistons, rings, pins and retainers. Pin Bushings. Complete Gasket Set. Connecting Rod Bearing Kit. Main Bearing Kit. Specify when ordering in comments section of order form main and rod bearing sizes of Standard, .010, .020 or .030. Thrust washer part number 735112M1 upper and part number 735113M1 lower, tabbed is not included and ordered separately if needed. (Part No: EOK2467)
$353.49

Engine Overhaul Kit, Perkins 203 Diesel - For tractor models 300, 30, 302, 304, 3165, 356, 40B, 50, 165, 255, 65 with engine serial number 29C1084 and up using AD4-203 Direct Injection Perkins Diesel, 3.6 inch standard bore with injectors at angle in cylinder head and engines using 2 piece rope type rear seal with .150 flange wall thickness. Engine Overhaul Kit. Contains CAST sleeves for engines originally produced with cast sleeves, pistons and rings, pins and retainers, pin bushings, gasket sets, crankshaft seals, intake and exhaust valves, valve keys, guides, springs. Engine bearings and thrust washers ordered separately. Please see category "engine bearings". (Part No: EOK2467-LCB)
$439.50

Engine Overhaul Kit, Perkins 236 Diesel - For tractor models 50C, 6500, 255, 265 with A4-236 Direct Injection Perkins (injectors at angle in cylinder head). Diesel engine serial number 236UA109215L and up. Kit contains sleeve and piston kit: sleeves, pistons, rings, pins and retainers. Pin Bushings. Complete Gasket Set. Intake and exhaust valves, valve keys and springs. Engine bearings and thrust washers must be ordered separately. (Part No: EOK2178-LCB)
$524.62

In-Frame Kit, Perkins 236 Diesel - For tractor models 6500, 50C, MF255, MF265 engine serial number 236UA109215L and up. Perkins A4-236 diesel, direct injection. Basic In-Frame Engine Kit includes: sleeve and piston kit with rings, pins and retainers, top engine set and oil pan gasket. (Part No: BIFP2178)
$392.44

Valve Overhaul Kit, Perkins 203 Diesel - Valve Overhaul Kit. Contains intake and exhaust valves, springs, keys and guides. For tractor models 300, 302, 304, 30, 3165, 356, 40B, 50, MF165, MF255, MF65. (Part No: VOKP203A)
$97.17

Valve Train Kit - For tractor models 165, (175 engine serial number UA103064L-U106654N), (194, 285, 290, 590 engine serial number U123424L and up), 255, 275, 50, 50B, 50C, 6000. (Part No: VTK406)
$97.35

Engine Parts
Balancer Unit with Oil Pump - Four Bolt Mount, Front Mount. For tractor models 1745, 175, 180, 184-4, 220, 24, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 3070, 31, 50, 50C, 50H, 60, 60HT, 6500, 6500H, 670, 6800H, 6830, 6830C, 690, 7830, 8830. Replaces 739128M91, 743206M91, 41733082, 41733043, 41733066, 41733056, 41733402, 47133049, 41733062, 41733049. (Part No: 746432M91)
$379.42

Bolts, Conn Rod - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 32762144)
$3.82

Bushing, Connecting Rod - FOR AD3.152 Perkins Diesel. Models: 1007, 1014, 1080, 1085, 1100, 1105, 1130, 1135, 1155, 1200, 135, 148, 152, 165, 175, 194, 20, 20C, 230, 235, 240, 250, 253, 254, 254S, 255, 2675, 2680, 2685, 2745, 275, 285, 290, 298, 30, 300, 302, 304, 3065, 3070, 3075, 3085, 3090, 3095, 30B, 3115, 3120, 3120T, 3125, 3140, 3165, 3370, 340, 342, 350, 353, 3530*, 356, 3625, 3630, 3635, 3645, 3650, 3655, 3660, 390T, 396, 398, 399, 40, 40B, 4225, 4235, 4245, 4255, 4260, 4270, 440, 50, 50B, 50C, 520, 525, 535, 540, 550, 560, 560UK, 565, 575, 590, 595, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 620, 625, 65, 660UK, 698, 699, 760, 8110, 8120, 8130, 850, 860, TX550, TX750, TX850.31134151 (Part No: 957E6207A)
$3.60

Bushing, Connecting Rod - For tractor models (165 up to engine serial number UA1030631), (175, 255, 275 up to engine serial number U106654N), (194, 285, 290, 590 engine serial number U123424L274 and up), 275 UK, 362, 365, 372, 373, 375, 377, 383, 387, 396, 399, 565, 575, 675, 1100, 3050, 3060. All with either 6.354 or 1006.60 Diesel Engines. (Part No: 31134123)
$4.73

Camshaft Gear - 56 tooth. For tractor models 1100, 1130, 1745, 180, 184-4, 220, 255, 2640, 2675, 270, 2705, 274-4, 282, 283, 285, 294-4, 30, 300, 3050, 3060, 3070, 3505, 3525, 3545, 3630, 399, 470, 50C, 50D, 50E, 50H, 60, 6500, 670, 699, 80, 850, 860, (165, 168, 175, 178, 185, 188, 265, 275, 290, 565, 575, 590, 690 all with engine A.212, A4.236 or A4.248). Replaces 31171353. (Part No: 736254M1)
$66.38

Camshaft, 4.236 Diesel - For tractor models 165, 175 engine serial number UA103064L-U106654N, 194 engine serial number U123424L>, 255, 275 engine serial number <248UA123423L, 275 engine serial number U123424L>, 275 engine serial number UA103064L-U106654N, 285 engine serial number U123424L>, 290 serial number U123424L>, 50, 50B, 50C, 590 serial number U123424L>, 6000. Replaces 31415321, 31415321P, 736818M1, 736818V1, 2100040, 70255924, 7C - 8002. (Part No: 31415321)
$118.39

Connecting Rod - For tractor models 1014, 1100, 1114, 165, 168, 174-4S, 175, 178, 185, 194, 255, 2620, 2645, 265, 2675, 274, 275, 285, 290, 3060, 3080, 3090, 3095, 362, 365, 373, 375, 377, 387, 390, 393, 396, 397, 399, 590, 690, 699 all with A4.212, A4.236, A4.248 or A6.354 engines. Replaces M7BJ0015, VPB6002, 02100013, 02101440, 3637034M1, 3637034M91, 6005000118, 676879, 736595M91, 738713M91, 747007M91, 84920, ZZ90009 (Part No: ZZ90009)
$78.72

Connecting Rod - Verify casting number 31337220. For tractor models (365, 65 all engine serial number 2939035 not ending with DL), (165, 255, 30, 300, 302, 3165, 356, 40B, 50, ALL engine serial number 29C1085), 304 engine serial number 2939036-29C1084, (20C, 235, 245, 30B ALL engine serial number ending in DS), 250 engine serial number ending in DSL, 40 Industrial with AD3.152 and AT3.152 engines, (135, 148, 20B, 20D, 20E, 20F, 230, 240, 250, 253, 254, 254S, 255, 30E, 30H, 350, 353, 355, 360, 363, 40E, 550 ALL with AD3.152 and AT3.152 engines), (155, 158, 165, 260, 560, 65, 765 ALL with AD4.203 engine). 8.875 INCH CENTER TO CENTER (IF NEEDING 9 INCH CENTER TO CENTER, ORDER NUMBER ZZ90011). Replaces: M7BJ0014, VPB6001, 31337220, 3637392M1, 3637392M91, 736386M91, 740596M91, 747008M91, 84774. (Part No: ZZ90010)
$77.62

Connecting Rod Bolt and Nut Assembly - This connecting rod bolt and nut assembly is used on multiple Massey Ferguson models with Perkins Engines. Replaces original part numbers 1476245, 1476245X1, 33221319, 33221327, 355756X1, 3639947M1, 375756X1. (Part No: 957E6215)
$2.91

Crank Gear - For tractor models 165 serial number 2939036-29C1084, 165 serial number 29C1085>, 255 serial number 2939036-29C1084, 255 serial number 29C1085>, 30 serial number 29C1085>, 300 serial number 2939036-29C1084, 300 serial number 29C1085>, 302 serial number 2939036-29C1084, 302 serial number 29C1085>, 304 serial number 2939036-29C1084, 304 serial number 29C1085>, 3165 serial number 2939036-29C1084, 3165 serial number 29C1085>, 356 serial number <2820092, 356 serial number 2820092>, 356 serial number 2939036-29C1084, 356 serial number 29C1085>, 365 serial number <2939035 NOT ENDING with DL, 40B serial number 29C1085>, 50 serial number 29C1085>, 65 serial number <2820092, 65 serial number <2939035 NOT ENDING with DL, 65 serial number 2820092>, 65 serial number 2939036-29C1084, 65 serial number 29C1085>. (Part No: 0410228)
$114.76

Crank Gear - 28 teeth. Do NOT use on build number: LE70089, LE22376, LE80173. For tractor models 1007, 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194, 194-4F, 255, 265, 274, 274S, 275, 284S-4S, 285, 290, 294S-4S, 3050, 3065, 3070, 30D, 3370, 362, 365, 373, 375, 377, 383, 387, 390, 393, 397, 398, 50, 50B, 50C, 50D, 50E, 565, 575, 590, 6000, 60H, 675, 690, 698, 698T. All with either A4.121, A4.236 or A4.248 Perkins Engines. Replaces 734749M1, 73479M1, 734749M1. (Part No: 31171681)
$59.20

Crankshaft - Crankshaft Kit using rear rope type seal. For Perkins diesel A4-203 and AD4-203. For 300, 302, 304, 30, 3165, 356, 50A, 50, MF165, MF255, MF65. Bearings and thrust washers additional. (Part No: 3638473M91)
$475.67

Crankshaft - Keyed nose, lip seal. For tractor models (65, 165, 255, 302, 304, 3165, 356, 300 all with D4.203 or 4.203 engines SN# 29C1085 and up). (Part No: 3637458M91)
$343.01

Crankshaft Pulley - Crankshaft Pulley is for tractor models 180, 184-4, 255, 265, 274-4, 275, 282, 294-4, 50C, (60 late production), (165 South Africa only), (175 with diesel engine). Replaces 31148791, 31148792, 31148797, 31148798, 31154612, 3637520M1, 734812M1, 735506M1. (Part No: 3638318M1)
$68.86

Crankshaft Pulley - For tractor models 175, 255, 275, (283 UK, Brazil), 3065, 3070, 375, 390, 390T, 393, 398, 50C, 50H, 6000, 60H. (Part No: 3638098M1)
$56.83

Crankshaft Pulley - This Crankshaft Pulley has three bolt holes. It is used on Perkins A4.203 and AD4.203 Engines. Used on 65, 165, 255, 270, 282, 283 (Part No: 734562M1)
$54.94

Crankshaft, 4.236 Diesel - Replaces 738226M91, 3637789M91. 3 bolt, splined nose, rope seal. For tractor models 165, 255, 275 engine SN# <248UA123423L, 50C, 6000. (Part No: 31315884)
$437.35

Cylinder Head - For tractor models 175, 180, 20, 255, 265, 275, 31, 40 all with Perkins A4.236 and A4.248 Diesel Engines. Cylinder head includes valves, guides and springs, assembled. Replaces ZZ080054, 743112M1. (Part No: 3637486M1)
$847.98

Cylinder Head - For tractor models 175, 194-4F, 255, 275, 283, 290, 374S, Early 375, Early 390, 394S, 690, 20C, 50C, 50D, 50H. Cylinder Head - Indirect Injection. Complete with valves and springs. for Perkins A4.212, A4.235, and A4.248 engines. Also replaces 3637486M91, ZZ80054, and ZZ80072. (S.40306) (Part No: 748400M91)
$847.31

Flywheel Gear, Perkins Engines - Flywheel Ring Gear. For Perkins engine in tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF383, Industrials: 20, 30, 40, 50. 115 teeth, 13-7/16 inch inside diameter. Replaces 410236. For 20, 30, 40, 50, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF383, MF50, MF65. (Part No: 731008M1)
$30.43

Flywheel Plate - For tractor models 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Part No: 1040886M1)
$79.52

Flywheel Tab Washer - This Flywheel Tab Washer is used on Massey Ferguson 35, 50, 65, 135, 150, 165, 175, 180 230, 235, 245, 255, 265, 275, 231, 240, 250, 253, 360, 362, 270, 282, 283, 375, 383, 390, 390T, 398, 399, 202, 203, 204, 205, 302, 304, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E, 30, 31, 40, 3165. It Replaces 731192M1, 731192M1, 731192V1 (Part No: 731192M1)
$1.01

Gear, Idler - 63 tooth. For tractor models 165, 168, 1745, 175, 178, 180, 184-4, 185, 188, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 31, 50C, 50D, 50E, 50H, 565, 575, 590, 60, 6500, 670, 6830, 6830C, 6830FC, 6860, 6870, 6880, 7830, 7830C, 7860, 7880, 8530F, 8830, 8860, 8870, 8880, (675, 690 early models with engine A4.212 or A4.248 engine), 910. Replaces 41115023. (Part No: 734738M91)
$102.66

Pushrod - For AT6.354.4, A6.354.4, C4.236, T6.354, 6.354 Perkins Diesel Engines, (AD3.152 with engine serial number less than 2820092). (Part No: 31434307)
$4.31

Ring Gear Nut, Flywheel - This nut is for the ring gear to case. Used with BOLT 825776M1. For models- 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. Price shown is for each, sold only in multiples of 12 items. (Part No: 891947M1)
$1.26

Rocker Arm (LH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces 747690M1, 3737A101, 3737A031, 3737A071, 3638185M1, 0520429, ``957E6469 (Part No: 41151483)
$18.90

Rocker Arm (RH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces original part numbers 3638184M1, 747691M1. (Part No: 41151484)
$17.55

Tappet, Perkins Diesel - Adjustable Tappet. Does not come with adjusting screw or nut. 353430X1 Nut and 32151116 Screw sold separately. Used on A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Perkins Engines. Replaces: 0860012, 731150M1, 957E6489, 81804255, 0860012, 41345 (Part No: 731150M1)
$8.85

Thrust Washer, Lower, Perkins Diesel - Tabbed off center. For tractor models (175, 180 engine serial number 4812575 and up), 265, 31C, 6500, 255, (275 engine serial number prefix 248UA or LF---N or LF---U only), (290, 294-4, 690 engine serial number prior to LF---U839080), 50C. Price shown is for each, sold only in multiples of 2 items. (Part No: 747129M1)
$6.51

Thrust Washer, Upper, Perkins Diesel - For tractor models (175, 180 engine serial number 4812575 and up), 265, 31C 6500, 255, (275 engine serial number prefix 248UA or LF---N or LF---U only), (290, 294-4, 690 engine serial number prior to LF---U839080), 50C. Price shown is for each, sold only in multiples of 2 items. (Part No: 747128M1)
$6.51

Valve Guide, Exhaust - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 3343J002)
$4.84

Valve Guide, Exhaust - These Exhaust Valve Guides are used in Perkins A4.236 Diesel Engine (early block), A4.236 Diesel Engine (late block), A4.248 (liner less Flame Ring), A4.248 (liner with Flame Ring). Replaces original part numbers 31431751, 33261751, 33261752, 33261754, 33261757, 3343J001, 3343J002, 3343J021, 3638922M1, 4223074M1, 748420M1. (Part No: 748420M1)
$3.63

Valve Guide, Intake - For Perkins Diesel. Replaces 33261731, 33261732, 3343F001, 3343F002, 3343F031, 3343F041, 3637056M1, 3640676M1, 4223073M1, 736297M1 (Part No: 3343F002)
$2.70

Valve Keys, Pair, Perkins Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 4 items. (Part No: 736453M1)
$4.71

Valve Overhaul Kit, Perkins 236 & 248 Diesel - Valve overhaul kit. Contains intake and exhaust valves, springs, and keys. For 31, 50C, 6500, MF175, MF180, MF255, MF265, MF275, MF290, MF294-4, MF690 (Part No: VOKP236)
$106.84

Valve Service Kit - For tractor models 31, 50C, 6500, MF175, MF180, MF255, MF265, MF275, MF290, MF294-4, MF690. Contains: springs, locks, (no valves). (Part No: VSKP236)
$55.13

Valve Service Kit, Perkins 203 Diesel - 203 CID 4 Cylinder Diesel Engine, 3.6 inch standard bore, injectors at angle in cylinder head. For tractor models 300, 302, 304, 30, 3165, 356, 40B, 50, MF165, MF255, MF65. Contains: springs, guides, locks, (no valves). (Part No: VSKP203)
$81.86

Valve Spring, Inner, Intake & Exhaust, Perkins Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 4 items. (Part No: 735525M91)
$3.34

Valve Spring, Outer, Intake & Exhaust, Perkins Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 4 items. (Part No: 735521M1)
$4.07

Valve Tappet - This Valve Tappet (Lifter) is used on Perkins: 1103A-33, 1103A-33T, 1103B-33, 1103B-33T, 1103C-33, 1103C-33T, 1103C-33TA, 1103D-33, 1103D-33TA, 1104A-44, 1104A-44T, 1104A-44TA, 1104C-44, 1104C-44T, 1104C-44TA, 1104C-E44, 1104C-E44T, 1104C-E44TA, 1106C-E60TA, A4.212, A4.236, A4.248, A6.354, AT4.236, AT6.354, T4.236, T6.354. Replaces 291962A1, 1481642, 4222069V1, 31434163, 4222069M1, 4226515M1, 740671M1, 3142U031, 31434163, 30-3181677, 70257402, 257402 (Part No: 740671M1)
$5.40

Valve Tappet Adjusting Nut - This Valve Tappet (Lifter) Adjusting Screw Nut is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. 3/8' inch UNF Thread. It is used with Screw 32151116 sold separately. It replaces OEM part numbers: 353430X1, 0576052, 70251225, 353438X1 (Part No: 353430X1)
$1.89

Valve Tappet Adjusting Screw - This Valve Tappet (Lifter) Adjusting Screw is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. Locking nut 353430X1 sold separately. It replaces OEM part numbers: 957E6549, 731332M1, 0720677, 72080053, 32151116, 3638112M1, 32151116 (Part No: 32151116)
$6.74

Valve, Exhaust, Perkins 236 & 248 Diesel - Exhaust valve, Stellite, replaces 741257M1. For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 2 items. (Part No: 747552M1)
$14.92

Valve, Intake - For tractor models (50C, 255, 275 with 4.236 diesel and engine serial number up to I106654N), (165 with 4.236 diesel and engine serial number up to UA103063L), (175 with 4.236 diesel and engine serial number UA103064L-U106654N), (6000 with 4.236 diesel and engine serial number up to UA1030631), (275 with 4.248 diesel engine), (194, 285, 290, 590 with 4.248 diesel and engine serial number up to U123424L), (1100 with 6.354 diesel and engine serial number 354UA10362 and up). (Part No: 31431641)
$7.70

Valve, Intake, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 2 items. (Part No: 739027M1)
$9.16

Engine Pistons and Sleeves
Piston - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Price is per piston. For tractor models 100, 1014, 1100, 1105, 1114, 1130, 1131, 1135, 1200, 1250, 165, 168, 174, 175, 178, 184, 185, 188, 194, 194-4, 255, 2620, 2640, 2645, 2675, 2680, 2685, 2720, 2725, 274, 274S, 274SK, 275, 284-4S, 285, 290, 294-4S, 294S, 3050, 3060, 3065, 3070, 3080, 3090, 3095, 30D, 3115, 3125, 3370, 3530, 3610, 362. (Part No: 68332)
$29.63

Piston Pin Bushing, Perkins 152 and 203 Gas or Diesel - Fits 152 CID 3 Cylinder and 203 4 Cylinder Gas or Diesel Engines. For tractor models 2500, 20, 40, MF135, MF150, 203, 205, 35, FE35, MF35, MF50, 200, 2244, 2200, 2500, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, 356, MF65, 300, 302, 304, 3165, MF165, 30, 40B, 50, MF255. (Part No: 740407M1)
$2.90

Piston Sleeve, Perkins 152 & 203 Gas or Diesel - Sleeve, CAST, replacing original CAST sleeve 734175M1, flange thickness .150 inch. Fits 152 CID 3 Cylinder and 203 CID 4 Cylinder Gas or Diesel Engines 3.6 inch standard bore. For tractor models 2500, 20, 40, MF135, MF150, 35, 203, 205, FE35, MF35, MF50, 200, 2244, 2200, 2135, MF235, 200B, 4500, MF230, 20C, 30B, MF245, MF250, 356, MF65, 300, 302, 304, 3165, MF165, MF255, 40B, 50. (Part No: 739043M1)
$31.14

Piston and Sleeve Kit - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: U5MK0034)
$53.25

Piston, Perkins 236 Diesel - 236 CID 4 Cylinder Diesel Engine, 3.875 inch standard bore. Piston with pin oil groove holes 10 top, 12 bottom. For 31, 50C, 6500, MF175, MF180, MF255, MF265. (Part No: 735187M91)
$67.27

Piston, Perkins 236 Diesel - Piston with pin; oil groove holes 8 top, 8 bottom. For tractor models 50C, 255, (6500, 265 engine SN# 236UA109215L and up. (Part No: 743110M91)
$50.93

Piston, Perkins 5 Ring - This is a 5 ring, 3.6 inch standard bore piston and pin for Perkins AD3.152 and AD4.203 engines. Uses 836325M91 ring set. Replaces original part numbers: AHM2188, 3639048M1, 4223940M91, 4223940V91, 731154M1, 731154V1, 734466M91, 734467M91, 743824M91, 743824V91, 780006, M03-17-05, 033 - 7635, 2130017, 31083, 31084, 4223940Z91, 71019611, 743824Z91, 82111, 82112, 82137, 82147, 9Y-4687, GL47. (Part No: 734467M91)
$26.64

Sleeve & Piston Kit, Perkins 203 Diesel - Sleeve and Piston Kit for (65 and 165, both serial number 2939036 and up), (255 with serial number 29C1084 and up), all with AD4-203 Regular Injection, injectors at an angle in cylinder head, Perkins Diesel Engine with cast sleeves. Sleeve and Piston Kit includes sleeves, pistons and rings, pins and retainers. Flange thickness of .150 inch. (Part No: PK467D)
$288.25

Sleeve & Piston Kit, Perkins 236 Diesel - Sleeve and Piston Kit for tractor models 50C, 6500, 255, 265 all engine serial number 236UA109215L and up, all with A4-236 Direct Injection Perkins Diesel. Sleeve and Piston Kit includes sleeves, pistons and rings, pins and retainers. (Part No: PK79)
$338.38

Sleeve, Perkins 152 Diesel - For AD3.152 Perkins Diesel. Price is per sleeve. Flange is (.150 inch). With engine serial number less than 2820092. Replaces 31358345, 1434175M1, 31358345, 734175M1, 739043M1, 2130002, 28057, 31358322, 72080003. (Part No: 739043M1)
$31.14

Sleeve, Perkins 236 Diesel - Cylinder liner. 236 CID 4 cylinder diesel, 3.875 inch standard bore, injectors at angle in cylinder head. For tractor models 31, 50C, 6500, 750, 760, MF1100, MF1105, MF1130, MF1135, MF175, MF180, MF255, MF265. (Part No: 736507M3)
$43.17

Engine Rings
Piston Ring Set, 1 Cylinder, Perkins 152 or 203 Diesel - 152 or 203 CID diesel engine standard bore 3.6 inch. Ring set, for 1 piston, used with CAST sleeves only. For 20, 200, 200B, 203, 205, 2135, 2200, 2244, 2500, 30, 300, 302, 304, 3165, 35, 356, 40, 40B, 4500, 50, FE35, MF135, MF150, MF165, MF230, MF235, MF250, MF255, MF35, MF50, MF65, Super 92. Set includes 2 at 3/32 inch, 1 at 1/8 inch, 2 at 1/4 inch. (Part No: 836325M91)
$17.04

Piston Rings - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 47P347)
$16.13

Piston Rings - One cylinders worth. For tractor models (50C, 255, 275 with 4.236 diesel and engine serial number up to U106654N), (6000, 165 with 4.236 diesel and engine serial number up to UA1030361), (175 with 4.236 diesel and engine serial number UA103064L-U106654N), (274, 275 UK, 362, 365, 372, 373, 375, 377, 383, 387, 565, 675, 3050 with 4.236 diesel), (575 with 4.236 diesel and engine serial number 236UA142518L), (1100 with 6.354 diesel engine), (TX550, 550, 1014 with 6.354.4 diesel engine). Replaces 735648M91, 736329M91, 736432M91, 744207M91, 745747M91, 745760M91, 745778M91. (Part No: 41158041)
$15.85

Ring Set 1 Cylinder, Perkins 236 Diesel - Ring set, for 1 piston. Can replace 738404M91 & 745769M91. For 31, 50C, 6500, MF1100, MF175, MF180, MF255, MF265 (Part No: 836583M91)
$38.79

Exhaust System
Exhaust Elbow - For A4-236/A4-248 DIESEL engines in tractors: 255, 265, 275, INDUSTRIALS: 50C, 50D. (Part No: 533446M2)
$64.17

Exhaust Manifold Gasket - This Exhaust Manifold Gasket is used with 736218M1 Manifold. Used on Massey Ferguson 30, 40B, 165, 255, 3165 all with diesel engines. Replaces 735040M1 and 4222528M1. Price shown is for each, sold only in multiples of 2 items. (Part No: 735040M1)
$3.08

Exhaust Manifold Gasket - This Exhaust Manifold Gasket is used on MASSEY FERGUSON 175, 180, 255, 265, 275, 270, 282, 283, 375, 383, 390, 390T, 398, 399. Used with 734700M1 and 736206M1 Manifolds. It replaces 736754M1 Perkins No. 36862159. (Part No: 736754M1)
$2.09

Exhaust Manifold, Horizontal - For tractor models 175, 180, 255, 265, 275, 50C. Exhaust manifold. (Part No: 734700M1)
$56.36

Manifold - Vertical Exhaust for 255, 265, 275, 50C, 50D with Perkins 4.236 or 4.248 Diesl Engine. (Part No: 741764M1)
$131.10

Manifold - For tractor models 165, 30, 3165. Exhaust Manifold for A4.203 engine. NOT for direct injection. Gaskets available as part 735040M1, not included. Replaces 37781321, 736218M1 (Part No: 736218M1)
$66.60

Manifold Gasket - Used on Perkins Engines with square center holes on the exhaust ports. It replaces original part numbers 4222050M1, 4222050V1, 735016M1. Priced each. (Part No: 735016M1)
$0.47

Manifold To Elbow Stud and Nut - This Stud is 1-5/8 inches long with 3/8 UNF (Fine) Thread. It replaces 0826232, 731866M1, 731862M1, 734697M1, 10826403, 0826403, 0826439, 0826481 (Part No: 734697M1)
$2.07

Muffler - Horizontal Exhaust inlet inside diameter 1 3/4 inch, outlet outside diameter, 1 3/4 inch overall length 39 inches. For MF135 (U.K.), (150, 165, 175, 180 with Perkins Engine) 230, 240, 245, 250 with Gas or Diesel Engine. (245, 255, 265, 275 with Diesel Engine). OEM number 539523M92, 539525M91, 890476M92. (Part No: 539523M92)
$38.73

Muffler - For tractor models 235, 245, 255, 265, 275. Replaces 578090M1. 2 3/4 inch inlet length, 2 1/8 inch inlet inside diameter, 23 inch shell length, 8 1/2 inch outlet length, 2 inch outlet outside diameter, 34 inches overall length. (Part No: 578090M92)
$117.81

Muffler - A= 6-1/2 inch inlet length, B= 2-1/8 inch inlet outside diameter, C= 17-1/2 inch shell length, D= 26-1/2 inch outlet length, E= 1-5/8 inch outlet outside diameter, F= 50-5/8 inches overall length. For tractor models 20B, 20E, 230, 231, 240, 250, 255, 340, 342, 350, 352, 355, 372, (550 serial number 620661 and up). Replaces 1683796M1, 1661930M1, 1683796M2, 1688171M6, 1680260M2. (Part No: 1683796M3)
$67.96

Muffler Pipe Gasket - Exhaust Elbow Gasket. Perkins Engines (Part No: 3640488M1)
$1.32

Muffler, Horizontal - Round body, 8 inch inlet length, 1-3/4 inch inlet inside diameter, 24 inches shell length, 7 inch outlet length, 1-3/4 inch outlet outside diameter, 39 inches overall length. For tractor models 135 UK with Perkins Gas or Diesel Engine, (245, 255, 265, 275 all with diesel engine), (230, 240, 250 all with gas or diesel engine). (150 with Perkins Gas or Diesel Engine). (Part No: 539525M91)
$46.40

Fuel System / Air Intake
Air Element Outer - Air cleaner element, outer, for dual element filter. For tractor models MF235 Orchard, MF245 Orchard, MF255, MF265. (Part No: 1094056M91)
$36.87

Carburetor Kit, Basic - Kit for Zenith 13338, 12548, 13337, 13316, 13372, 13795, 133378 carbs used on 135, 165, 175, 180, 20, 235, 245, 255, 265, 30, 65. (Part No: Z104)
$24.00

Choke Cable - 41 inches total length. For tractor models 150, 165, 175, 180, 255. (Part No: 505759M1)
$29.18

Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on Massey Ferguson 230, 231, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 290, 670, 690, 154-4, 174-4S, 184-4S, 194-4F, 20C, 20D, 254-4, 274-4, 294-4, 30B, 30D, 30E, 40B, 50C, 50D, 50E. Replaces original part numbers 1039071M1, 1890147M1, 3638268M1, 3907536M1. (Part No: 1039071M1)
$4.49

Fuel Filter - Fuel filter element, external body type. 4-3/8 inch high. For tractors: MF230, 235, 245, 255, 265, 270, 275, 282, 283UK, 283 Brazil, 290, 360, 375, 383, 390, 390T, 398, 670, 690, 2745, 2775, 2805, 3050, 3060, 3070, 3505, 3525, 3545, 3630, 3680, 3690, Industrials: 20C, 30B, 30D, 30H, 40B, 50C, 50D, 50E, 50F, 50HX, 60H, Forklifts: 4500, 6500. Can replace Perkins 26560602, 1896287M91. (Part No: 3405419M1)
$4.79

Fuel Filter - This Fuel Filter Kit is used on Gas Massey Ferguson: 2500 Forklift, 4500 Forklift, 6500, 40 Industrial, 20 Industrial (Perkins Gas), 135 (Perkins Gas), 150 (Perkins Gas), 175 (Perkins Gas), 2200, 230 (Continental Z145), 235 (Continental Z145), 255 (Perkins Gas), 265 (Perkins Gas), 275, 30 (Perkins Gas). Replaces 521251M92, 521250M2, 833064M1, 146176M1, 521248M91, BF879, FF179, C5UZ9155A (Part No: 521251M92)
$7.94

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Includes bleeder port and screw. For tractor models (1100 serial number up to 8838067), (1130 serial number up to 88T0173), (135 serial number 9A10311 and up), (150 serial number 9A24714 and up), 165, 175, 180), (35 serial number 240398 and up), (35 Turf, 35 Utility both serial number 655000484 and up), (50 serial number 535223 and up), (65 serial number 697565 and up), (Super 90 serial number 6906208 and up), (2135 Utility and Turf serial number up to 9A10311), (300 serial number up to 29E7574), (410 serial number up to 6909990), (510 serial number 8823113 Thru 8838).(INDUSTRIAL/CONSTRUCTION: 20, 203, 205, 2200, 2500, 30, (302 serial number 119700021 and up), (304 serial number 119750021 and up), 31, 3165), 40), 50, 50A). Replaces original part numbers 1447072M91, 1876507M91, 193229M91, 193239M91, 3597838M91, 883786M91. (Part No: 1446017M91)
$31.95

Fuel Filter Head - This Fuel Filter Head is used on CAV type fuel systems on Massey Ferguson. Replaces original part numbers. 1891262M1, 1044869M1 (Part No: 1891262M1)
$14.99

Fuel Injection Pump - For tractor models 165 engine serial number 29D1494 and up, 255 with 4.203, 30, 40B. Replaces 1447156M91, CAV3240F938, 1447156M91, 1883517M91, DPA3240F938, 3240768, 3240F938, 883517M91, 899071M91. (Part No: 883517M91)
$688.62

Fuel Injector - This new Fuel Injector without injector seal is a CAV type with Perkins reference number 2645615. Used engine serial number 152UA220812E and up. Fits 135, 135 U.K., 150, 165, 20, 2135, 230, 235, 255, 30, 300, 302, 304, 3165, 40, 40B, 50 LOADER, 50A, 65. Replaces OEM part numbers 1446702M1, 1446788M91, 733272M91, 736800M91 NOTE: Most tractors used different injectors at different times of production. Verify OEM numbers before ordering. (Part No: 733272M91)
$47.72

Fuel Injector Banjo Bolt - This Banjo Bolt is used on Perkins Engines with CAV type Injection Systems. It replaces original part numbers 731567M1, 95315, 067 - 6312, 70251292, 71011878. Uses 2 gaskets order part #921176. (Part No: 0095315)
$1.25

Fuel Injector Nozzle - For tractor models (135, 150 up to serial number 152UA220812E), (165 serial number 203UA20974D and up), (255 up to serial number 203UA126251DL), (203, 205 with injector tag UB), (2135, 2200, (2500 Forklift up to serial number 152UA220812E), (30 up to serial number 152UA126251DL), (3165 serial number 203UA20974D and up), (40 up to serial number 152UA220812E), 50, (50A except with CAV injector). Replaces BDLL150S6372. (Part No: 1853019M91)
$26.37

Fuel Injector Washer - One of these is used per Injector on Perkins Engines with CAV type fuel systems. It replaces 376 091X1, 376091X1, 396091X1, 921173, TX50039, 115 16 214, 118358ES, 159553A, 1830 105 000, 70251284, 81716268, M03-47-03, (Part No: 921173)
$0.57

Fuel Lift Pump - Fuel pump for AD4-203 and A4-318 Diesel Engines, two-hole mounting. For tractors: MF165 engine serial number 29F4249 and up MF255, MF285, MF298, MF698, MF1080, MF1085 Industrials: 30, 40B, 50, 50A, 302 and 304, engine serial number 29F4249 and up, 3165 engine serial number 29F4249 and up Combine: 540. Replaces 26471328, 2641333, 2641336, 886100M91, 14466155M91, 1447693M91, 2641328, 2641333, 2641336, 32556, 35218, ULPK0010. (Part No: 3637286M91)
$26.85

Fuel Lift Pump - Fuel pump for A4-236 and A4-248 Diesel Engines, four-hole mounting. For tractors: MF175 engine serial number 236UA57083 and up, MF180 engine serial number 236UA57265 and up, MF184-4, MF255, MF265, MF270 early production, MF274-4 to tractor serial number 221N00936, MF275, MF294-4 to tractor serial number 2230003. Replaces 1447017M91, 1447688M91, 3637290M91, 3637300M91, 3637444M91, 3640785M1, 3641402M91, 375839X1, 376522X1, 4222091M91, 4222108M91, 740861M1, U5T0059, 3637300M1. This Pump uses S40567 Repair Kit. (Part No: 3637300M91)
$15.72

Fuel Line - The fuel line is used from the tank valve to the lift pump. It is 17-3/4 inches long. Used on Massey Ferguson 20D, 20E, 20F, (30E Power Shuttle), (30E with thermal or ether start), 30H, 40E, (135 UK Engine serial number 152UA38571D and up), (240 below serial number N01001, with or without reserve fuel tank), (240 serial number N01001 - A20286, with ergonomic pedals), 240P, (250 with or without reserve fuel tank). Replaces 883712M92, 883712M94, 883712M93 (Part No: 883712M92)
$7.71

Fuel Pump - Fuel Pump for AD4-203 Diesel Engine, two-hole mounting, glass bowl. Tractors: MF65, MF165 (prior to serial number 29F4249). Industrials: 302 and 304 (prior to serial number 29F4249), 3165 (prior to serial number 29F4249). Fuel pump with 2 mounting hole with sediment bowl. Replaces 2641A065, 2641345, 4222452M91, 890955M91, 892630M91. (Part No: 3637338M91)
$37.43

Fuel Shut Off - Fuel Shut Off Valve. For tractor models 165, 20D Indust/Const, 20E Indust/Const, 231, 240P, 255, 261, 2640, 30E Indust/Const, 35, 3505 Combine, 3525 Combine, 3545, 50 Loader, 65, 765, TE20, TEA20, TO20, TO30. (Part No: 1851653M91)
$7.07

Fuel Shutoff Cable - 47 inches total length. For tractor models 1080, 1085, 165, 175, 255, 265, 275. (Part No: 511414M1)
$22.74

Fuel Tank - This fuel tank measures 29 3/8 inches long and 26 1/8 inches on the mounting holes. For 255 after serial number 9A282760, 265 after serial number 9A282759, 275 after serial number 9A284893, 40B after serial number 9A282759, 50C after serial number 9A282766 and 50D. Tanks is overall length of 29 3/8 inches. It has been reported some of the original tanks are 3 inches shorter and this tank may not fit your tractor. (Part No: 579012M92)
$207.98

Heater Plug - Heater Plug Thermostat Burner with Thread Connector. Also replaces 13H2468 and 2666103. For 1007, 1014, 1114, 1134, 1250, 135, 148, 165, 168, 174, 175, 178, 185, 188, 20B, 20D, 20E, 20F, 230, 240, 250, 255, 265, 274SK, 275, 285, 290, 3050, 3060, 3065, 3070, 30D, 30E, 30H, 35, 350, 353, 355, 360, 363, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E, 50, 50B, 50D, 50E, 530, 535, 550, 560, 565, 575, 590, 60H, 65, 660, 665, 675, 690, 698, 699, 800, 805, 820, 825, 830, 835, 840, 845. (Part No: 893501M1)
$13.34

Injection Pump - This injection pump fits Perkins AD4.236 engines. For tractor models MF175, MF180, MF255, MF265, MF270, MF275, MF6070, Industrials MF6500, MF31, MF50C, MF50D. Replaces 1447267M1, CAV3241F360, 1446876M91, 3230F350, 3240758, 3241360, 883545M, 883545M91, 899070M, 899070M91. (Part No: 1446876M1)
$651.97

Injector - This New Injector is used on 20F Indust/Const, 230, 231, 240, 250, 255, 275, 30E Indust/Const, 30H Indust/Const, 40B Indust/Const. It replaces original part numbers 1447401E91, 1447401M91, 1447401R91, Perkins 645680 (Part No: 1447401M91)
$47.72

Injector Leak Off Line Washer - Two of these are used per injector on Perkins Engines using CAV type fuel Systems. Replaces 376518X1, 921176, 067 - 7011, 159048A, 500730, 70251294, TX10361, TX50047, 380428S, 81821105. (Part No: 921176)
$0.18

Injector Line Leak Off - This Injector Line Leak Off pipe is used on 4 cylinder Perkins Engines with CAV type fuel systems. It replaces 35587344, 734723M91, 035 - 8008, 70257263 (Part No: 35587344)
$34.55

Injector Line Set - This kit contains Massey Ferguson part numbers: 744512M91 No. 1 Cylinder Line Assembly (Perkins No. 35343025), 744513M91 No. 2 Cylinder Line Assembly (Perkins No. 35343026), 744514M91 No. 3 Cylinder Line Assembly (Perkins No. 35343027) and 744515M91 No. 4 Cylinder Line Assembly (Perkins No. 35343028). It is used on 4 cylinder Perkins Engines with CAV type fuel systems. This set replaces OEM numbers 35343025, 35354266, 3641094M91, 735099M91, 744512M91, 353403025, 35354266, 3641094M91, 3641262M91, 735100M91, 744512M91, 744513M91, 35343027, 35354293, 3641095M91, 735101M91, 735761M91, 744514M91, 35343028, 35354289, 3641156M91, 735102M91, 735102M92, 738890M91, 744515M91. (Part No: S41522)
$36.75

Injector Line Set, 4 Cylinder - Set consists of 4 injection pump to cylinder lines. For tractor models 300, 165, (165 UK with AD4.203), (255 with AD4.203), 30, 302, 304, 3165, 40B, 50, 50A, (65 engine serial number 2921733 and up). Contains (1)734194M91 (1) 732899M91 (1) 732898M91 and (1) 735308M91. (Part No: FPL2200)
$55.40

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Part No: CAV7135-110)
$25.43

Injector Shield - This injector shield is used on Perkins Diesel engines. Three or more used depending on the application. Replaces original part numbers 33817114, 732824M1 (Part No: 732824M1)
$1.19

Manifold Heater - Thermostart Intake Manifold Heater on Perkins Diesel Engines. For tractors: MF154-4, MF184-4, MF240, MF250, MF270, MF274-4, MF399, MF670, MF690, MF698, MF3070, MF3090. Replaces Perkins 2666108, Massey Ferguson 1446935M1, 3583453M2, 3583543M2, 3583543V2, 893501M91. (Part No: 3583543M2)
$14.99

Gauges
Fuel Gauge - For tractor models (20D, 20F, 230, 235, 240, 245, 250, 253, 255, 260, 265, 275, 285, 290, 298, 30E, 40E, 50B, 50D, 50E, 50F, 550, 565, 575, 590, 595), (2620, 2640, 2680, all with serial number <271212), 50, serial number 87500>. Fuel Gauge. 2 inch body diameter. (Part No: 1877717M92)
$22.28

Tach Cable - Tachometer cable assembly, 23 inch. For tractors: MF135 Perkins Gas and Diesel, MF230 diesel to serial number 9A349238, MF245 diesel except Orchard, MF255 with A4-203 diesel Industrials: 20, 20C diesel Turf to serial number 9A349236, 40B, 2135. (Part No: 508231M91)
$18.23

Tach Cable - Tachometer cable assembly, 53 inches. For tractor models MF85 diesel, MF88 diesel, MF255 early production with A4-326 diesel, MF265 diesel to serial number 9A349238, MF275, MF285 to serial number 9A349238. Industrials: 50C, 320 Skidder, Ferguson TO35 with 23C 4 Cylinder Diesel, FE35 with 87mm gas or 23C Diesel. Replaces 544198M91, 829487M91, 532430M91, 882021M91 (Part No: 544198M91)
$13.05

Tractormeter Drive with Gasket - A=7/8 inch UNF. For tractor models 255, 265, 275, 285, 1085, 1155, 2640, (2675 serial number 9R1551 and up), 2705, 2745, 2775, 805, 3505, 3525, 3545, 50C, 50D, 60. (Part No: 535126M93)
$40.67

Hitch / Drawbar
Beam, Center Link - For tractor models 135, 165, 175, 180, 235, 240 serial number 522354-A20286, 245, 250, 255, 265, 298, 362, 375, 390, 398, 399. (Part No: 1863393M92)
$91.40

Draft Control Lever Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50(C, D, E, ). (Part No: 1660324M91)
$39.00

Drawbar, Swinging - Swinging Drawbar is 35.75 inches in length, 2 inches wide, 1.125 inches thick. Also replaces 184611M1. Three 1.032 inch diameter holes at 1.25, 3.25, and 3.25 inches from front. For model s:130, 135, 150, 165, 202, 205, 20C, 235, 245, 255, 265, 275, 30B, 35, 40B, 50, 65, TO35. (Part No: 531468M1)
$98.08

Leveling Assembly, Left Hand - This Left Hand Leveling Assembly is used on 255, 265, 275, 285, 1080, 1085, 270, 282, 283, 290, 298. (Part No: 1863888M91)
$108.15

Leveling Box Assembly - With Hand Crank adjusts from 20.5 inches to 26 inches. For tractor models 65, 175, 180, 205, 230, 240, 245, 250, 253, 255, 270, 283, 290, 298, 302, 304, 360, 362, 390, 390T, 393, 399, 670, 690, 3090, 3120, 3140, 3165, 30E, 40E, 50E. Replaces 893569M92, 1884760M92, 1884760M94. (Part No: 1884760M92)
$105.61

Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Part No: 193181M1)
$35.92

Leveling box fork - Leveling box fork 13.5 inch long, .75 inch thread, .75 pin hole (Part No: 897659M1)
$35.76

Lift Arm End, LH - Lift arm end, category I, left hand, 7/8 inch pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Part No: 184464M92_)
$42.75

Lift Arm End, RH - Lift arm end, category I, right hand, 7/8 inch pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Part No: 184463M92)
$42.75

Lower Lift Arm End Assembly LEFT - For tractor models 65, 85, 88, Super 90, 175, 180, 255, 265, 270, 275, 283, 290, 383, 390, 393, 670, 690. Lower Lift Arm End Assembly, LEFT, Cat II 1 1/8 inch pin hole. (Part No: 184462M92)
$36.29

Lower Lift Arm End Assembly RIGHT - For tractor models 65, 85, 88, Super 90, 175, 180, 255, 265, 270, 275, 283, 290, 383, 390, 393, 670, 690. Lower Lift Arm End Assembly, RIGHT, Cat II 1 1/8 inch pin hole. (Part No: 184461M92)
$32.99

Pin - Pivot Pin. For swinging drawbar. 1 inch outside diameter by 1-7/8 inch working length. Not for swinging drawbar kit SDA6 which requires part number Pt3, 7/8 inch diameter pin. Fits original swinging drawbar 184611M1. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF230, MF235, MF245, MF255 industrials: MF20C, MF30B, MF40B, MF3165. For MF165, MF65. (Part No: 184630M1)
$12.16

Response Control Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50(C, D, E, ). (Part No: 1661918M91)
$27.75

Stabilizer Pin - This Pin is used with telescoping stabilizers and with 514992M2 bracket. Uses 186809M1 Nut, sold separately. It replaces original part number 521006M1. (Part No: 521006M1)
$8.70

Telescoping Stabilizer - For tractor models 250, 251, 253, 255, 261, 265, 270, 275, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 1085. Stabilizer, telescoping arm. Adjustable from 26 to 35 inches. (Part No: 539881M2TSK)
$47.38

Hydraulic System
Auxiliary Hydraulic Pump - This Auxiliary Hydraulic Pump is for models: 135 UK, 165, 165 UK, 175, 178, 180, 1080, 1085, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 298, 670, 690, 698, 699. Replaces OEM Numbers 1663627M92, 1686765M1, 1686765M91, 1686766M91, 1869458M92, 526099M93, 531604M92, 5316073M92, 531607M92, 531607M93, 886367M95, 886367M96. (Part No: 1663627M92)
$311.56

Center Housing - For tractor models 231, 240, 245 serial number up to 9A349239, 250, 255 serial number after 9A250920, 265, 270, 290, 276 serial number up to T192032, 690 2WD serial number up to T192032, 690 4WD serial number up to T314008, 20C, 20D, 30B with rear axle serial number CE17398 and up, 30E, 50C with rear axle serial number CE17398 and up, 50F. center housing. Part number stamped on right side. (Part No: 1664511M3)
$955.97

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Part No: 897504M1)
$0.75

Diaphram - .779 inch stud diameter. For tractor models 135, 150, 165, 175, 180, 20C, 230, 231, 235, 240P, 245, 255, 265, 282, 285, 298, 30, 30B, 31, 40, 40B, 50C, 698, 699. (Part No: 1860114M91)
$12.62

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Part No: 193400M1)
$8.43

Draft Control Plunger - This Draft Control Plunger has a 1.865 Inch Head Diameter. It replaces original part numbers 898136M1, 886348M2, 886351M1 (Part No: 898136M1)
$25.36

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces ``1660439M1, 887654M1, 887654M2. (Part No: 887654M1)
$1.41

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Part No: 9N547B)
$22.95

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Part No: 898124M1)
$10.73

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Part No: 182581M1)
$13.48

Draft Control Shaft - This Draft Control Shaft is used on 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E. Replaces 1870243M92 (Part No: 1870243M92)
$30.67

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Part No: 898127M2)
$4.91

Hydraulic Diverter Valve - For 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Part No: S.60032)
$110.79

Hydraulic Lift Pump - For tractor models 230, 245, 250, 255, 265, 275, 283, 298, 50C, 670, 690, 698, 699), (20C, 30 Ind. all axle serial number FE101> without pressure control), (30B, 40 all axle serial number FF100> without pressure control), (30E, 50E all less auxiliary hydraulic) 240 8/91>. Hydraulic Lift Pump. Replaces 1661616M91, 1672148M92, 1675125M91, 1872449M96. (Part No: 1683301M92)
$550.62

Hydraulic Lift Pump - For MF 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 290, 298, 670, 690, 698, 699, Ind 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C. Replaces Hydraulic Pump that has a Pressure Control Vavle. Pressure control valve does not come with pump. `` Also note that your old valve may not fit this pump as there were more than one size. `` Uses valve number 1681789M91. Also replaces 1675125M92, 1675126M92, 1868439M98. (60468S) (Part No: 1672251M92)
$565.62

Hydraulic Lift Pump Rebuild Kit - Repairs OEM pump. Replaces OEM Kit number 1810860M91. Chamber has 4 holes. Bottom hole = 1/2 inch. For tractor models 135, 165, 230, 235, 240, 245, 250, 255, 265, 275, 285, 290, 298, 350, 390, 398, 399, 675, 690, 698, 698T, 699, 1080, 1085. (Part No: 556603)
$179.40

Hydraulic Piston - This is an early style 3-3/8 inch, three ring piston. It uses 3 - 897597M1 rings, sold separately. Used on 135, 135 UK, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31 combine, 20, 30, 175 UK, 178 UK, 20C, 30B, 40B, 50C, 50D, MF 40. Replaces 899596M91 (Part No: 899596M91)
$29.43

Hydraulic Piston - For tractor models 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50D, 50E, 670, 698, 699. Seal kit is available as part number 2528201K1 . Piston is 3.375 inch diameter. (Part No: 1665738M91)
$44.10

Hydraulic Piston Ring - Used on 899596M91 3 -3/8 inch piston. Three are required. Priced and sold individually. Replaces original part number 897597M1. For tractor models 135, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31, 20, 30, 175, 178, 20C, 30B, 40B, 50C, 50D and 40. (Part No: 897597M1)
$2.15

Hydraulic Pump Camshaft Bushing - This Hydraulic Pump Camshaft Bushing is used on MK1 and MK2 Pumps. It has an inside diameter of 1-3/8 inches, outside diameter of 1-5/8 inches and is 7/8 inches wide. Replaces OEM numbers: 1664491M1, 1664491M2, 195949M1, 1865012M1, 1865012M1 (Part No: 1664491M1)
$4.49

Hydraulic Pump O-Ring and Gasket Kit - This O-Ring and Gasket Kit is used on 135, 150, 165, 175, 180, 255, 265, 275, 30, 31, 40, 3165. It replaces 1810684M92 (Part No: 1810684M92)
$8.10

Hydraulic Pump O-Ring and Gasket Kit - This O-Ring Kit with Gaskets is used on 230, 235, 245, 255, 265, 275, 1080, 1085, 285, 231, 240, 250, 253, 360, 362, 270, 282, 283, 290, 298, 20D, 30E, 40E Replaces 1810680M91 (Part No: 1810680M91)
$13.25

Hydraulic Pump Piston Ring - Hydraulic Pump Piston Ring is used with 1860038M1. Two are used per piston, 4 per Tractor. Sold individually. (Part No: 897493M1)
$2.13

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Part No: 898643M1)
$9.07

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Part No: 180904M1)
$0.45

Hydraulic Valve - For tractor models 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20C, 230, 240, 245, 250, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 31, 350, 355, 365, 375, 390, 398, 399, 40, 40B, 50C, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. This valve is 7.75 inches long. (Part No: 1870763M92)
$57.30

Hydraulic Valve Kit, Remote Control - This 1 levered, Single Spool Valve includes hoses, quick couplers. The left lever shifts it from 3 point to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 1960s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Part No: S.65502)
$344.99

Hydraulic valve - This is a Single Hydraulic Remote Valve. It bolts to the lift cover in place of 180908M1 cap. (Part No: 12012002)
$244.22

Lever, Draft Control - This Draft Control Lever is used on 230, 235, 245, 255, 265, 275, 231, 240, 250, 270, 282, 283, 290, 298. Replaces 1870340M92, 1870340M91 (Part No: 1870340M92)
$25.75

Lever, Position Control - This Position Control Lever is used on 230, 235, 245, 255, 265, 275, 231, 240, 250, 270, 282, 283, 290, 298. Replaces 1870341M92 (Part No: 1870341M92)
$32.35

Lift Arm - For tractor models MF 135, 165, 175, 180, 230, 235, 245, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 670, 690, 698, 1080, 1085. Replaces OEM number 886404M2. (Part No: S.41447)
$77.14

Lift Arm - For tractor models 135, 150, 165, 175, 20, 203, 205, 235, 245, 255, 265, 275, 285, 30, 30B, 30D, 3165, 40, 40B. (Part No: 885446M1)
$115.98

Lift Arm, LH/RH - Used with 897567M3 Cross Shaft (51 spline). It uses a 7/8 inch pin. For tractor models 1080, 1085, 165, 175, 180, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. Replaces 1680040M91, 1680033M1, 1680040M91, 885445M91, 885447M1, 885448M1, 897579M1. (Part No: 1680040M91)
$58.58

Lift Cover - This lift cover is used on many Massy Ferguson Tractors. It uses a 3 1/8 inch Piston. It replaces those marked: 1861320M1, 1870951M2, 884615M1, 1870955M2, 1693551M1. Replaces 1693547M1, 1693547M91, 1693551M91, 3761903M91, 884612M92, 190861M2, 1870950M91. (Part No: 3761903M91)
$476.10

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 serial number 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Part No: 886549M2)
$1.31

Lift Cylinder - For MF 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 290, Ind. 20, 20C, 30, 30B, 40, 40B, 50C. Lift cylinder for 3 3/8 inch piston. (Part No: 1671082M1)
$91.59

Lift Cylinder Piston Seal Kit - Used with 1665738M91 piston. For tractor models 20, 20C, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50E, 135, 165, 175, 180, 230, 235, 245, 255, 265, 270. (Part No: 2528201K1)
$9.26

Lift Cylinder Piston with Rings - For tractor models 135, 150, 165, 230, 235, 240, 245, 250, 255, 265, 282, Ind: 20, 20C, 20D, 30, 30E, 40, 202, 203, 204, 205, 302, 304, 2135, 3165. Hydraulic Lift Cylinder Piston with Rings. 3 1/8 inch diameter. Replaces 897561M91. (Part No: 1665737M91)
$43.37

Lift Handle Knob and Stud - Metal (not rubber) knob For tractor models 35, 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 270, 275, 282, 283, 285, 290, 298, 698, 699, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 2135, 3165. (Part No: 1860403M1)
$10.13

Lift Pump - For tractor models 135, 150, 165, 175, 20C, 235, 245, 255, 265, 275, 30, 31, 40B, 50C, 50D, (30E, 50E, 178 ALL UK). 12 Spline Shaft. (Part No: 886821M94)
$200.10

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Part No: 180979M2)
$8.22

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Part No: 180933M1)
$11.25

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Part No: 1000251M1)
$6.02

Lift Pump Piston - This Lift Pump Piston has a 0.980 Inch Piston. Uses 897493M1 rings, not included. For tractors: 135, 150, 165, 175, 180, 230, 235, 245, 1080, 1085, 255, 265, 275, 285, 231, 240, 250, 253, 360, 362, 20D, 30E, 40E, 270, 282, 283, 290, 298. Replaces 1860038H1, 1860038M91, 1860038V1, 3158071M1, 518476M1 (Part No: 1860038M1)
$22.44

Lift Pump Strainer Assembly - Verify measurements of 2 7/16 inch outside diameter, 1 5/8-7/16 inch inside diameter, 3 3/4 inch height. For tractor models 1080, 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 40, 50C, 550, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699, 765. Hydraulic Pump Strainer also replaces 1687042M91, 1687042V91, 1810744M91, 1870199M92, 1687042M1. (Part No: 1687042M91)
$7.58

Lift Pump Valve Assembly - This Lift Pump Valve Assembly measures 7.5 inches in length and is for tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 240P, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 550, 565, 575, 590, 670, 675, 690, 698, 698T, 699. Valve is 7.5 inches long. (Part No: 1681789M91)
$32.10

Lift Ram 2.250 Inch - 2.250 inch on both ends. For tractor models 1080, 1085, 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, 50E, 670, 690, 698, 699. (Part No: 886404M2)
$77.54

Lift Response Plate - This Lift Response Plate is used on Massey Ferguson Tractors: 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1884877M93, 1872648M93 (Part No: 1872648M93)
$50.35

Lift Shaft - 51 spline, 2 3/16 inch diameter. (1 hole in end). Replaces 897567M3, 897567V3. (Part No: 897567M3)
$86.93

Link Head - For tractor models 135, 165, 175, 180, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 298, 30, 30B, 30D, 30E, 31, 362, 383, 390T, 391, 392, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. (Part No: 1863389M1)
$38.85

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Part No: 886410M1)
$38.50

Relief Valve - For tractor models TO35, 135, 150, 165, 175, 180, 235, 245, 255, 265, 2705, 2745, 35, 50, 66. (2750 psi) Replaces 884747M93, 884747M92, 884747M93, 883402M1, 40A63 (Part No: 883402M1)
$19.68

Response Control Shaft - This Response Control Shaft is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 898208M2 (Part No: 898208M2)
$37.27

Stand Pipe, Hydraulic Oil Pressure - 12.500 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 245, 253, 255, 285, 30, 302, 304, 31, 3165, 360, 362, 375, 383, 390, 390T, 3925, 40, FE135 Coventry. (Part No: 898229M1)
$16.35

Standpipe, Hydraulic Oil Pressure - 9.75 inches long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Part No: 1869119M1)
$16.85

Lights
Bracket Set For lights - Fits rounded fenders. For tractor models TE20, TEA20, TO20, TO30, TO35, FE35, F40, MH50, MF50, 65, 85, 90, 135, 150, 165, 175, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 290, 298, IND 20, 20C, 20D, 30, 30B, 30D, 40B, 50C. Replaces 1750674M1, 52335M1, 523334M1. (Part No: 9N13471)
$35.85

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Used on Massey Ferguson models with flat top fenders. Replaces: 505281M1, 509652M91 (Part No: 28A116)
$11.97

Headlight - Used with fender part numbers 530967M92 and 530966M92. For tractor models 235, 245, 255, 265, 275, 285, 30, 31. Also replaces OEM numbers 7027185 and D4NN13002C. (Part No: 164089AS)
$24.39

Headlight Washer - Used with light part number 164089AS. For tractor models 235, 245, 255, 265, 275, 285, 30, 31. (Part No: 504781M1)
$3.30

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: L4411LED)
$48.10

Light Switch With Knob - Light Switch with knob 509309M1. 5 Terminal. For tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF250, to serial number 2773N01000, MF255, MF265, MF270, MF275, MF285, MF288 except Brazil, MF290, MF298, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150. Replaces 772954M1, 522812M1, 522813M1, 509309M1 (Part No: 772954M1)
$29.84

Sealed Beam Bulb - Sealed beam bulb. For tractors: MF235, 255, 265, 275 & 285. 12-volt (L4440X1), 3 spade terminals. (Part No: 535505M1)
$26.03

Sealed Beam Bulb - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Early fender mount for tractors: TO35, MH50, MF50, MF65 Inner or upper fender for tractors: MF150, 165, 175, 180, 1100, 1130. Fits various other models. (L4411). Replaces 1002803M91, 1509347M1, 1751347M91, 1752866M91, 181856M91, 189544M91. (Part No: 373662R91)
$8.48

Oil System
Dipstick - Dipstick for oil is 7 inches in length. Models using Perkins A3-152, AD3-152, A4-203 & AD4-203 engines. Also replaces 31786412. For tractor models DT5500, 135, 148, 150, 154-4, 1545, 158, 20, 202, 203, 205, 20C, 20D, 2135, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 30, 300, 302, 304, 30B, 30D, 3165, 35, 350, 356, 360, 40, 40B, 4500, 4830FC, 50, 50A, 550, 5830, 5830FC, 5860, 5870, 6030FC, 6070, 65, 765. (Part No: 731117M91)
$2.07

Oil Fill Cap - This oil fill cap comes complete with chain. For models 35, 50, 35 Utility, 135, 150, 230, 235, 240, 20, 203, 205, 2135, 245, 250, 65, 65 UK, 165, 255, 302, 304, 30, 40, 3165, 390T, 393, 398, 3065, 3070, 175UK, 283, 290, 383, 390, 394, 690, 3060, 3074, 6150. Replaces original part numbers 2487854, 248854, 734962M1, 734962M91, 734962M93. (Part No: 734962M91)
$4.34

Oil Filter - Oil filter spin-on element. For tractors: MF165 gas, MF175, MF180, MF255, MF265, MF275, MF285, MF1080, MF1085, others using A4-212, =AG4-212, A4-236, A4-248, A4-318. Replaces Perkins 2654403. 5-3/8 long. For 540, MF1080, MF1085, MF285 (Part No: 1447048M1)
$7.49

Oil Filter Head Gasket - This Oil Filter Head Gasket is used on Massey Ferguson tractors with Perkins Engines. Replaces 4222003M1, 0490514, 490514, 731124M1 (Part No: 731124M1)
$0.72

Oil Filter Head to Block Bolt - This Bold is used on Perkins 144, 152 and 203 cubic inch engines. It is used to bolt on new spin on filter conversion heads. It measures 3/8 x 3 1/2 inch UNF thread. Replaces original part numbers 354505, 354505X1, 0096443, 10096443. (Replaces 354511X1, 4-1/4 inch bolts on original filter heads, to 3-1/2 inch bolts for spin on filter head.) (Part No: 354505X1)
$1.49

Oil Filter, Spin On - Oil filter spin-on element. For tractors: MF135, MF150, MF165, MF235 industrials: 203, 204. Others with A3-152, AG3-152, AD3-152, A4-203, AD4-203. Replaces Perkins 2654408, S.40536. 5- 3/8 inches long. (Part No: 1447082M1)
$8.03

Oil Pan Drain Plug - This is a 3/4 inch 16 thread Oil Pan Drain Plug. Uses C9NN6734A washer, not included. It replaces original part numbers 376501X1, 735129M91, 748160M1 (Part No: C9NN6730B)
$1.76

Oil Pan Drain Plug Washer - Used with C9NN6730B 3/4 inch Oil Pan Drain Plug. (Part No: C9NN6734A)
$.36

Oil Pressure Switch - Oil pressure switch located directly behind the oil pressure gauge, uses blade type wire terminal. For Perkins diesel engines in tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 SN# 9A349239 & up, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF11 For 203, 205, 20C, 20, 2135, 302, 304, 30B, 30D, 30, 3165, 31, 40B, 40, 50A, 50C, 50D, 50, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF1155, MF135, MF1505, MF150, MF165, MF175, MF1805, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Part No: 509682M91)
$11.99

Oil Pump - Oil pump assembly for Perkins A4-203 & AD4-203 gas & diesel engines. Tractors: 65, 165, MF255; industrials: 30, 40B, 50, 302, 304, 3165; 300S.P. Replaces 41314164, 736617M91. (Part No: 3638633M91)
$78.16

Oil Pump - For tractor models 300, 470, (255, 275 all engine serial number up to UA103063L), (50C, 6000 engine serial number up to UA1030631), (50, 50B engien serial number up to UA187117L), (165UK with 4.212 engine). Replaces 41314054, 3637470M91. (Part No: 3638631M91)
$63.47

Oil Pump - This Oil Pump is for Tractors with 6 Bolt Balancer in Perkins Engines. Replaces original part numbers 4132F041, 3637489M91, 3637489V91, 4132f021, 293177A1 (Part No: 4132F041)
$61.27

Oil Pump Assembly - Fits the following tractors using Perkins AD4.203 or A4.203 DIESEL Engines: MF 50, 65, 165, Industrials: 255, 30, 40B, 302, 304, 3165. Also replaces 41314087 and 3638633M91. (Part No: 1447483M91)
$89.84

Oil Pump for 4 Bolt Balancer - This Oil Pump is used inside a 4 bolt balancer on Perkins Engines. Used on Massey Ferguson: 175, 180, 255, 265, 261, 270, 31, 50C, 50D, 50E, 50F, 60, (6500 AD4.236 Direct injection), 275, 283, 290, 690, 50H, 60H, 294, 383, 390, 394, 3050, 3060, 50E. Replaces 743194M1, 734850M1, 743020M1, 736510M1, 743206M91. (Part No: 743194M1)
$82.11

Spin-On Oil Filter Head - This Oil Filter Head can replace the old style cartridge type filter. For tractor models 65, 150, 165, 20, 20C, 230, 235, 245, 2500, 255 all with either AD3.152 or AD4.203 perkins engines. Used with spin on filter 1447082M1 Filter ordered separately. Does not come with a mounting gasket and we do not have available. You need to make a gasket or use an ATV Sealant. (Part No: 741922M1)
$11.19

Spin-On Oil Filter Head - This Filter Head is used with spin on filter A-1447048M1. When using filter head & filter, it will replace the old style cartridge type filter. For tractor models (165, 175, 180, 255, 265, 275, 285, 6500 all with A4.318, AD4.236 and AD4.248 Perkins diesel engine). (Part No: 741614M1)
$14.64

Spin-On Oil Filter Kit - This Spin-on Oil Filter Kit will replace the cartridge type filter for models 150, 154-4, 165, 230, 231, 235, 240, 245, 254-4, 255, 20, 20C, 20F, 30, 30B, 30D, 40, 2500, 4500 forklift. Spin-on Filter Kit for A4.212, A4.236 and A4.248 engines. Contains head, gasket and filter. Uses Filter Part Numbers 1447048M1 or S.40538. (Part No: 2654156)
$29.03

Spin-On Oil Filter Kit - This Oil Filter Kit is for tractor models 35, 135 65, 150, 165, 20, 20C, 230, 235, 245, 2500, 255. All with either AD3.152 or AD4.203 Perkins gas and diesel engines. Contains head part number 741922M1, gasket and filter. Uses filter part numbers 1447082M1 or S.40536. (Part No: S.40533)
$22.80

PTO / Driveline
Bearing - Bearing, outer, for PTO Output Shaft (inside diameter 1.771 inch X outside diameter 2.952 inch x .629 inch thick) For tractors: TO30, TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175 late production, MF235 For tractors with dry brakes: MF255, MF265 to serial number 9A349239, MF275 to serial number 9A349239. For tractors using snap rings on bearing. (Part No: 195498M1)
$21.32

Bearing, PTO Main Drive Shaft - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 270, 275, 285, 290, 35, 50, 65. PTO Main Drive Shaft Bearing (Part No: 833646M1)
$23.08

Clutch Housing, Independent PTO - For tractor models 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 1080, 1085, 20C, 30, 31, 40B, 50C, 50D. (Part No: 515875M92)
$289.90

Output Shaft, PTO Seal - Oil seal, outer, for PTO output shaft. For tractors: MF230 axle serial number FD101, CD8028 and up, MF231, MF235 live PTO with axle serial number FD101 and up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to serial number P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle serial number FD101, CD8028 and up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle serial number FD101 and CD8028 and up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860. (Part No: 834216M1)
$5.63

PTO Cap - For tractor models 230, 235, 240, 243, 245, 250, 253, 255, 260, 263, 265, 270, 275, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 20, 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H, 50HX, 60H. (Part No: 532888M1)
$9.65

PTO Clutch Plate - For tractor models 255, 265, 275, 285. (Part No: 772813M1)
$10.20

PTO Cover, LH - For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 30B, 30D, 30E, 392S, 40B, 40E, 50E. Replaces 888108M1, 3760665M1 (Part No: 3760665M1)
$25.04

PTO Fork - For tractor models 20, 20C, 230, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 30B, 30E, 350, 360, 362, 375, 383, 390, 40B, 50E. (Part No: 1870594M92)
$28.37

PTO Gear - 32 outer teeth, 23 splines. For tractor models 165, 175, 20E, 20F, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 360, 375, 383, 390, 40, 40B, 50C. (Part No: 1872274M1)
$75.62

PTO Gear - This is first gear for the PTO. For tractor models 135, 148, 150, 168, 185, 188, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590, 165 STANDARD TRANSMSSION/MULTI-POWER SERIAL NUMBER 130774->. For 8 speed transmission, 53 teeth, 21 splines. (Part No: 1868532M1)
$87.87

PTO Gear, Constant Mesh - This Constant Mesh Gear has 53 Teeth and 15 Splines. Used on Massey Ferguson 135, 150, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590. It replaces part number 899329M1 (Part No: 899329M1)
$115.85

PTO Hub, Ground Speed - 23 tooth, 10 spline, 2.975 inch diameter. For tractor models 135 late production, 165, 175, 230, 235, 240, 245, 250, 255, 265, 275, 283 Brazil. (Part No: 1872271M1)
$90.49

PTO Lever Knob - This PTO Lever Knob is used with 1672622M94 PTO Lever. It replaces original part number 1877461M1 (Part No: 1877461M1)
$5.21

PTO Lever, Steel - This is a Steel PTO Lever used on 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 240, 250, 270, 282, 283, 20, 20B, 20C, 20F, 30B, 30E, 40B, 40E, 50E. Order 1877461M1 knob if needed. Replaces original part number 1672622M94 (Part No: 1672622M94)
$15.92

PTO Retainer Housing - Retainer Housing, PTO Pinion Shaft, Multi-Power Transmission. Inside diameter of tube is 2.21 inches. Unit is less bearing and seal. For MF135, MF150, MF165, MF175, MF180, MF235, MF245, MF255, MF265, MF275, MF35, MF50, MF65, FE35. Note: If replacing old style housing that uses a bushing: seal number 1860867M3, bearing number 886668M1 and throw out bearing carrier number 886727M4 must be used also. (Part No: 1860889M91)
$189.58

PTO Seal Retainer Housing - This Seal Retainer Housing is used on many Massey Ferguson tractors. Replaces part numbers 180465M1, 180465V1 (Part No: 180465M1)
$22.02

PTO Seal Shield - This PTO Seal Shield is used on many Massey models with single speed PTO, including; (165UK Engine Serial number 144682 and up), (230 Rear Axle Serial Number FD101, CD8020 and up), 231, 231S, (235 Transmission Serial Number FD101 and up), 240 up to Engine Serial Number P38370), 245, 250, (253 up to Engine Serial P38370), (255 Wet Brakes), 282, 283, )283 Brazil up to Serial Number 2915), 290, (360, 375, 383, 390, 390T up to Engine Serial Number P38370), 670, 690, 698, 699, (20 Rear Axle Serial Number FD101, CD8028 and up), 20C, 20D, 20E, (20F up to Serial Number 5101D0782), (30 Wet Brakes), 30B, 30D, 30E, (31 Rear Axle Serial Number FD101, CD8020 and up), (40 Wet Brakes), 40B, 40E, 50C, 50D, 50E. Replaces 533183M1. Verify Part Number before ordering. (Part No: 533183M1)
$2.87

PTO Shaft - For 30 late production with dry brakes and Live PTO 165 UK serial number 130773-144682 with Live PTO, 135 UK serial number 439191 and up with Live PTO, 230 with rear axle serial number below FD101 or CD8028 with Live PTO, (255, 265, 275 all with dry brakes and Live PTO), 40 with dry brakes rear axle serial number below FD101 or CD8028 with Live PTO, (135, 150, 175, 20, 31 all with Live PTO), 165 with multi-power and standard transmission with Live PTO, 235 with rear axle serial number below FD101 with Live PTO. PTO Shaft 540 RPM, 24 1/32 inches long, 21 drive splines. (Part No: 1868557M93)
$167.08

Pinion Shaft, PTO - 17 teeth, 25 spline. For tractor models 135, 150, 165, 235, 245, 255, 265, 275, 285, (290 with multi power trans). Replaces 1868528M91 and 1868528M92 (Part No: 1868528M91)
$144.28

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Part No: 886366M91)
$87.26

Seal - PTO Main Drive Shaft - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 290, 35, 50, 65, FE35. PTO Main Drive Shaft Seal. (Part No: 883935M1)
$3.08

Shaft Bushing, PTO - For 135, 135UK, 150, 165, 165UK, 175, 175UK, 180, 20, 202, 203, 2135, 2200, 230, 235, 2500, 255, 265, 275, 30, 302, 31, 3165, 35, 35FE, 35X, 40, 4500, 50, 65, 6500, TO35. PTO Shaft Bushing. (Part No: 180461M1)
$11.46

Seats
Backrest - Formed backrest, black. Tractors: MF50 serial number 533414 and up, MF65 serial number 692932 and up, and MF150, MF165, MF175, MF180, all with serial number 9A136826 and up, MF255, MF265, MF275, MF285. Industrial: 31. Replaces 1032434M91. For 31, MF150, MF165, MF175, MF180, MF255, MF265, MF275, MF285, Industrial 31. (Part No: 1043314M92)
$63.08

Rubber Seat Bumper - This seat bumper is used with 181316M92 seat brackets. The measurements are 2 inches long, 1 inch wide, 1/2 inch thick. It includes 2 1/4 - 20 UNC screws. Replaces 181319M1, 32008AF, 354239X1, screw: 43142PF, bumper: 887074M1 (Part No: 887074M1)
$6.00

Seat Assembly - One piece black seat assembly with vinyl cover formed over foam cushion on a steel frame. Has holes for drainage & welded on mounting brackets. Replaces Float-A-Matic. Mounts to OEM Suspension. Replaces 533813M91, 533813M92, 533813M93, 533813M94, 533813M95, 533813M96, . Models MF135, MF230, MF235, MF245, MF255, MF265, MF275, MF285~ Industr For 20C, 30B, 30D, 40B, 50C, 50D, MF135, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Part No: 533813M96)
$172.17

Seat Bumper, Rubber - Fits tractors with a Knoedler Float-a-Matic using metal bushings, 1.465 inches long, .635 inches thick. For tractor models (some 50), 65, 95, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 1080, Industrials MF20, MF20C, MF30, MF30B, MF30D, MF31, MF40B, MF50C, MF50D, 220 Skidder, 44 Windrower, 34 Swather, 36 Swather. (Part No: 1015879M1)
$17.50

Seat Cushion, Black - Seat cushion, black. Tractors: MF50 serial number 533414 and up, MF65 serial number 692932 and up, MF150, MF165, MF175, MF180, all with serial number 9A136826 and up: MF255, MF265, MF275, MF285. Industrial: 31. Replaces 1032168M91, 1043315M91. For 31, MF150, MF165, MF175, MF180, MF255, MF265, MF275, MF285, MF50, MF65. (Part No: 1050547M92)
$67.43

Sheet Metal / Body Parts
Fender Support - For tractor models 150, 175, 255, 265, 275, 285, 30, (180 late production), (165 serial number 9A130003 and up), (235, 245 with ROPS). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 526462M1)
$187.68

Fender With Bracket - With NON-ORIGINAL TYPE BRACKET. Rear fender, dished type with mounting bracket, mounting bracket spot welded on. For tractors without roll-over protection structure. No tool box hole. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 except Orchard, MF150, MF165, MF175, MF230, MF235 except Vine and Orchard, MF245, MF255 with 16 inch rims, MF265 standard, MF275 standard, MF285 standard Industrials: 20 except Turf, 20C except Turf, 30 except Turf, 30B, 35 Utility, 40, 50, 50A, 202, 203, 204, 205, 2135 Utility, 3165 Utility, also these models with 4-post R.O.P.S., 30D, 40B, 50C. For MF1100, MF1105, MF1130. Additional Shipping of $20.00 per fender due to the weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 526905M91LR)
$115.35

Fender, Clamshell without Bracket - Fender Panel comes as pictured without bracket, dished type, made exactly like the original. Price is for one fender. For tractors without roll-over protection structure. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 exc. Orchard, MF85 standard, MF135 except Vine and Orchard, MF150, MF165, MF175, MF230, MF235. Add additional $10 shipping per fender due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 526904M1)
$105.80

Flat Top Fender Bracket - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 30, 31. Flat Top Fender Bracket, Right or Left. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: S.61847)
$124.95

Flat Top Fender Light Housing - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 30, 31 Fender Headlight Housing for Flat Top Fenders. 2 Headlight Holes. Fits Original 100 series or the replacements we sell with slight modification. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 506262M2)
$58.44