Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Massey Ferguson 240 Tractor Parts

[Categories]   [All Massey Ferguson Models]   [Print]  


Accessories / Supplies
Massey Ferguson 240 Engine Block Heater
Engine Block Heater
- For tractor models 135, 150, 230, 231, 235, 240, 245, 250, 253, 254-4, 282, 283, 298, 360, 364S, 399, 698. Engine Block Heater for 1 1/4 inch opening in block. 600 watts, 120 volts. (Item #: 120029, Ref: 19841A91) $73.00

Brakes
Massey Ferguson 240 Actuator and Latch Kit
Actuator and Latch Kit
- With spring and clevis pin. For tractor models TO35, FE35, F40, MH50, 50, (65 up to serial number 692932), 135, 150, 230, 235, (240 up to 2/1995), (283 Brazil), 20, 20C, 30B, 30D, 35 Turf and Utility, (40, 40B, 50C, 50D with instant reverse transmission), 50. Replaces 181450M1, 181449M1, 180809M1, 181149V1. (Item #: 169743, Ref: 181450M1) $19.60

Massey Ferguson 240 Brake Adjuster Assembly
Brake Adjuster Assembly
- Brake Adjuster Assembly. This part measures 4 1/4 inches at it's shortest length, fully screwed together. If you need a shorter one, the threaded side can be cut to make a shorter piece. Also can replace early type brake adjusters. Fits TEA20, TEF20, TO20, TO30, TO35, FE35, 165 UK, 178, 240, 50F, 50H, 60H, 35 UK. Replaces 1850213M91. (Item #: 166242, Ref: 1850213M91) $22.00

Massey Ferguson 240 Brake Adjuster Spring
Brake Adjuster Spring
- This Spring is 5-3/16 inches over all, has a 2-11/16 inch coil length and a 5/8 inch coil diameter. It is used on tractor models FE35, 135 UK, 231, 240, 20D, MF 35 UK. Replaces original part number 1850217M1 (Item #: 124543, Ref: 957E2035) $3.90

Massey Ferguson 240 Brake Anchor Spring
Brake Anchor Spring
- This Brake Anchor Spring is 4 inches overall length, has a 2-3/8 inch coil length and 5/8 inch coil diameter. It is used on the following Ferguson and Massey Ferguson tractors: FE35, TEA20, TEF20, 135 UK, 165 UK, 178, 231, 240 175 UK, 20D, 50F, 50H, 60H, MF 35 UK. Replaces original part numbers 825064M1 and 1890319M1 (Item #: 178056, Ref: 957E2036) $5.50

Massey Ferguson 240 Brake Arm
Brake Arm
- For tractor models 35, 35UK, 50, (135 up to serial number 9A106904), 135UK, (150 up to serial number 9A106430), 240, (20 serial number 9A106430), 20D, (30 up to serial number 9A106430), 35 Turf and Utility, 2135, 3165. (Item #: 180864M1) $20.27

Massey Ferguson 240 Brake Drum
Brake Drum
- Brake drum 16 inch outside dia 4 1/2 inch hub diameter. For tractors: TO35, MF35, F40, MH50, MF50, MF135 (except orchard), MF150, MF230, MF235 (except orchard), MF240, MF245 (except orchard). Industrials: 20, 20C, 20D, 30 turf, 35, 40, 202, 204, 2135, 2200, 3165. Uses two 182278M1 retaining screws per drum (not included). Replaces 181230M1, 827707M91, 827707M7, 827707M6, 827707M3, 825631M91, 822707M5, 8207707M4, 181230M1, 827707M1, 827707M4, and A827707M5. (Item #: 105637, Ref: 827707M5) $90.00

Massey Ferguson 240 Brake Drum Retaining Screw
Brake Drum Retaining Screw
- This Brake Drum Retaining Screw Measures 1/2 -13 NC x 3/4 inches. Four are used per tractor, sold individually. If you order 1, you are only going to get one screw. It is used on the following with shoe style brakes: 2200, 2135, 3165, 20C, 20D, 30, FE35, TE20, TEA20, TO20, TO30, F40, TO35, 130, 20, 202, 204, 35, 135, 148, 150, 230, 231, 240, 245, 340, 35, 50, MH50, 550. It is used with 827707M5 Break Drum. Replaces: 182278M1, TO1127. (Item #: 125739, Ref: 182278M1) $1.90

Massey Ferguson 240 Brake Lever Bracket, Right Hand
Brake Lever Bracket, Right Hand
- Brake lever bracket replaces 1667224M1, 1860972M2. For tractor models 1085, 135, 165, 165 UK, 175, 180, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 263, 265, 271, 275, 275 UK, 281, 282, 283, 283 UK, 285, 290, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D. Different suppliers have different parts for the same part number. VERIFY PICTURE LOOKS LIKE YOUR OLD PART. (Item #: 105643, Ref: 847705M2) $119.00

Massey Ferguson 240 Brake Lever Return Spring
Brake Lever Return Spring
- This Brake Lever Return Spring is use on multiple Massey Ferguson Tractors. It is 3 5/16 inches in length. It replaces original part numbers 533618M1, 517503M1, 184171M1, 1868691M1, 773222M1. (Item #: 124541, Ref: 773222M1) $7.20

Massey Ferguson 240 Brake Pedal Lock
Brake Pedal Lock
- For tractor models 135 UK, (202 gas), (203 diesel), 20D, 20F, 240, 240S, 250, 253, 30E, 35, 40E, (50 serial number up to 533414), (65 serial number up to 692932), FE35, TO35. (Item #: 173120, Ref: 181960M1) $14.30

Massey Ferguson 240 Brake Pedal Shaft Bushing
Brake Pedal Shaft Bushing
- For Massey Ferguson tractor models TO35, 35, 35X, 50, 65, 135, 150, 165, 175, 178, 230, 235, 240, 245 (s/n 9A349239-earlier), 250, 253, 263, 265, 265S, 271, 281, 282, 283, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30E, 31, 40, 40E, 202, 203, 2135, 3165, Replaces Massey Ferguson OEM number 195910M1, (Item #: 150916) $13.40

Massey Ferguson 240 Brake Pin Kit
Brake Pin Kit
- Brake Pin Kit to service your brakes. For models TO20, TO30, TE20, 135 UK, 165 UK, 175 UK, 178, 20D, 231, 240, 240P, 240S, 35, 35X, 50F, 50H, 60H. (Item #: 105640, Ref: 1810029M91) $5.90

Massey Ferguson 240 Brake Plate
Brake Plate
- This Brake Plate us used on multiple Massey Ferguson Tractors. Replaces 827143M91, 825040M1, 825040M2, 825041M1, 825041M2, 827143M92, 827143M94, 827143M95, 827143M96, 897042M1, 897042M2, 87089998. (Item #: 105639, Ref: 827143M95) $202.00

Massey Ferguson 240 Brake Shoe Lining Set
Brake Shoe Lining Set
- For tractor models 135UK, 165UK, 175UK, 178, 231, 240, 241, 35X. Replaces 1810345M91, 1851062M91, 1851063M91, 202631, 3620602M91 (Item #: 105701, Ref: 1851062M91) $38.00

Massey Ferguson 240 Brake Shoe Set
Brake Shoe Set
- Includes 2 shoes with linings. 2 inches wide. One wheel set. Tractors: 135 UK, 148, 158 Indust/Const, 165 UK, 175 UK, 178 UK, 20 Indust/Const, 20C Indust/Const, 20D Indust/Const, 230, 231, 240, 240P, 240S, 241, 340, 35 UK, 35X, 50 Indust/Const, 50B Indust/Const, 50D Indust/Const, 50F Loader, 50H Loader, 50HX Loader, 550 UK, 60 Loader, 60H Loader, 65, FE35, TE20, TEA20, TED20, TEF20. Replaces Massey Ferguson: 1810348M91, 1810517M1, 1810517M92, 3620602M91 (Item #: 179590, Ref: 1810517M91) $127.00

Massey Ferguson 240 Cable - Hand Brake
Cable - Hand Brake
- For Massey Ferguson tractor models 240, 241, 243, 253, 263, Replaces Massey Ferguson OEM number 1689024M93, 49" Total length, For 2WD Only, (Item #: 151841) $28.80

Massey Ferguson 240 Cable, Hand Brake - Right Hand or Left Hand
Cable, Hand Brake - Right Hand or Left Hand
- For Massey Ferguson tractor models 240 (s/n A20286-later), 240 (2WD w/Wet Brakes, s/n A20286-later), 243 (4WD), 253 (4WD), 263 (4WD), Replaces Massey Ferguson OEM number 3698735M91, Fits Right or Left Hand sides, Length: 49-3/4", Additional Handling and Oversize Fees Apply To This Item, (Item #: 162029) $29.20

Massey Ferguson 240 Cable, Hand Brake - Right Hand or Left Hand
Cable, Hand Brake - Right Hand or Left Hand
- For Massey Ferguson tractor models 240 (2WD and 4WD, s/n A20286-later), 243 (4WD), 253 (4WD), 263 (4WD), Replaces Massey Ferguson OEM number 3698736M91, Fits Right or Left Hand sides, Length: 59-29/64", Outer cable length: 50-5/8", (Item #: 162030) $26.60

Massey Ferguson 240 Handbrake Assembly
Handbrake Assembly
- For UK built models with drum brakes. Handbrake Assembly. Replaces 898792M91, 898652M94, 898654M92, 899044M95, 345718X1, 353754X1, 354039X1, 898639M96, 898653M91, 892266M1, 892267M1, 892268M1, 892269M1, 898639M91, 898639M94 (Item #: 180568, Ref: 898639M96) $85.00

Massey Ferguson 240 Handbrake Assembly
Handbrake Assembly
- For Massey Ferguson tractor models 135 (UK), 231, 240, Compatible with Massey Ferguson Construction and industrial models 20F, 30E, 40E, Replaces Massey Ferguson OEM number 1473871M91, (Item #: 160572) $70.00

Massey Ferguson 240 Hand Brake Cable
Hand Brake Cable
- This cable can be used Left or Right side depending on the application. It measures 61-57/64 inches overall. Replaces 1689025M94, 1689025M95 (Item #: 162024, Ref: 1689025M95) $40.40

Massey Ferguson 240 Handbrake Repair Kit
Handbrake Repair Kit
- This kit replaces Massey Ferguson part numbers 892269M1, 892268M1, 892266M2, 892267M1, 898654M91, 898654M92. Used on 135UK, 165UK, 175UK, 178, 231, (240 between serial number 522354 and A20286), 250, 20F, 30E, 40E (Item #: 187555, Ref: 892269M1) $15.90

Massey Ferguson 240 Intermediate Brake Disc
Intermediate Brake Disc
- This Intermediate Brake Disc has a 8.976 inch outside diameter and a 4.960 inch inside diameter. Replaces OEM numbers K963647, K945755, 37H8180, 1860965M1, 1860965M2, 3613538M2, 15454600, 154.5460.0, 395.34.0112m 411040, 30359700 (Item #: 126977, Ref: 1860965M2) $16.00

Massey Ferguson 240 Spring
Spring
- Spring, actuator disc return for disc brakes on tractors, just over 1 inch long: MF154-4, MF184-4, MF235 orchard, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, to serial number V39466, MF375 to serial number V39466, MF383 to serial number V39466, MF390 to serial number V39466, MF398 to serial number V39466, MF399 to serial number V39466, MF670, MF690, MF698, MF699 Industrials: 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 50F Forklift: 4500, 6500. For the following tractors with cast iron axle: MF135, MF165, MF175, MF180 Industrials: 30, 31, 40, 50A. For 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50F, 6500, MF135, MF154-4, MF165, MF175, MF180, MF184-4, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, and more. Replaces 1853148M1. (Item #: 124547, Ref: C5NN2N320A) $2.00

Massey Ferguson 240 Spring, Parking Brake Latch
Spring, Parking Brake Latch
- For tractor models F40, FE35, TO35, 1080, 1085, 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 20, 230, 235, 240, 282, 30, 3165, 65, 35, 35 UK, 40, 50, MH50. (Item #: 173676, Ref: 180809M2) $5.20

Clutch
Massey Ferguson 240 Carrier
Carrier
- Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Item #: 112309, Ref: 886727M4) $14.50

Massey Ferguson 240 Clutch Alignment Tool - 1-1\8 inch x 21 and 1-5\8 inch x 25 Spline
Clutch Alignment Tool - 1-1/8" x 21 and 1-5/8" x 25 Spline
- For Massey Ferguson tractor models 20, 30, 40, 231, 231S, 240, 241, 241S, 243, 251XE, 253, 261, 263, 265S, 271, 271XE, 275, 281XE, 283, 285S, 290, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 396, 398, 399, 431, 451, 461, 471, 481, 491, 492, 533, 593, 596, 699, 2670, 2680, Replaces manufacturer number 8301145, Pilot Diameter: .670", 1st Spline: 1 1/8", 21 Spline, 2nd Spline: 1 5/8", 25 Spline, (Item #: 167411) $27.90

Massey Ferguson 240 Clutch Cover Release Lever Pin
Clutch Cover Release Lever Pin
- Pivot pin, for clutch cover release lever to cover on tractors: MF240, MF250, MF253, MF270, MF275, MF282, MF283 except Brazil, MF290, MF298, MF383, MF390, MF398, MF399, MF690, MF698, MF699 industrials: 20D, 30E, 35, 50E. Also used as an alternate on clutch covers manufactured in the United Kingdom for the following tractors: MF35, MF50, MF65 industrial: 20. For 20, 20D, 30E, 35, 50E, MF240, MF250, MF253, MF270, MF275, MF282, MF283, MF290, MF298, MF35, MF383, MF390, MF398, MF3989, MF399, MF50, MF65, MF690, MF698, MF699. Price shown is for each, sold only in multiples of 3 items. (Item #: 183795, Ref: 891826M1) $6.60

Massey Ferguson 240 Clutch Disc
Clutch Disc
- For Massey Ferguson tractor models 158, 178 (Engine s/n 729574 - earlier), 231, 240, 250, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 355, 670, 690, 2605, Replaces Massey Ferguson OEM number 1866042M93, 3599462M92, 887889M94, M887889HD6, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 135030) $133.00

Massey Ferguson 240 Clutch Disc
Clutch Disc
- For Massey Ferguson tractor models 158, 178 (Engine s/n 729574 - earlier), 231, 240, 250, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 355, 670, 690, 2605, Replaces Massey Ferguson OEM number 3701010M91, (Item #: 166264) $58.00

Massey Ferguson 240 Clutch Disc, Remanufactured
Clutch Disc, Remanufactured
- For Massey Ferguson tractor models 158, 178, 231, 240, 250, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 355, 670, 690, 2605, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 5 Pads, (Item #: 206722) $144.00

Massey Ferguson 240 Clutch Disc, Remanufactured
Clutch Disc, Remanufactured
- For Massey Ferguson tractor models 231, 240, 251XE, 253, 261, 263, 265, 271, 281, 283, 285, 350, 355, 360, 362, 365, 375, 383, 390, 398, 451, 461, 471, 481, 533, 573, 583, 4225, 4233, 4235, 4240, 4325, 4335, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 21, Clutch Center: Spring, Clutch Type: 5 Pads, (Item #: 206729) $181.01

Massey Ferguson 240 Clutch Disc, Remanufactured, 1693883V91
Clutch Disc, Remanufactured, 1693883V91
- For Massey Ferguson tractor models 231 (Engine s/n E12095 - later), 240, 241 (Engine s/n E12095 - later), 251XE, 253, 261, 263, 265, 271, 281, 283, 285, 350, 355, 360, 362, 365, 375, 383, 390, 398, 451, 461, 471, 481, 533, 573, 583, 4225, 4233, 4235, 4240, 4325, 4335, Replaces Massey Ferguson OEM number 1693883V91, 1693883M91, 3701008M91, 3697208M91, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 21, Clutch Center: Solid, Clutch Type: 5 or 6 Reg Pads, (Item #: 206731) $202.76

Massey Ferguson 240 Clutch Disc, Remanufactured, 1693884M91
Clutch Disc, Remanufactured, 1693884M91
- For Massey Ferguson tractor models 231, 240, 251XE, 253, 261, 263, 265S, 271, 271X, 271XE, 281, 281X, 281XE, 283, 285S, 350, 355, 360, 362, 365, 375, 383, 390, 398, 451, 461, 471, 481, 533, 573, 583, 4215, 4220, 4225, 4233, 4235, 4240, 4325, 4335, Replaces Massey Ferguson OEM number 1693884M91, 048438T2, 3597096M91, 3597670M91, 3599459M92, 3599460M92, 3610274M91, 3610274M92, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 21, Clutch Center: Solid, Clutch Type: Woven, For a New version of this sku use Item #: 149696, (Item #: 206730) $120.01

Massey Ferguson 240 Clutch Disc, Remanufactured, 1866042M93
Clutch Disc, Remanufactured, 1866042M93
- For Massey Ferguson tractor models 158, 178 (Engine s/n 729574 - earlier), 231, 240, 250, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 355, 670, 690, 2605, Replaces Massey Ferguson OEM number 1866042M93, 3599462M92, 887889M94, M887889HD6, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 206723) $137.51

Massey Ferguson 240 Clutch Disc, Remanufactured, 3599462M91
Clutch Disc, Remanufactured, 3599462M91
- For Massey Ferguson tractor models 158, 178 (Engine s/n 729574 - earlier), 231 (Engine s/n E12094 - earlier), 240, 250, 253, 261 (s/n D09002 - earlier), 263, 265, 270, 275, 281, 282, 283, 285, 290, 355, 670, 690, 2605, Replaces Massey Ferguson OEM number 3599462M91, 887889M94, 3599462M92, 1866042M93, 887889M91, 887889M92, 887889M93, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206721) $90.01

Massey Ferguson 240 Clutch Disc, Used
Clutch Disc, Used
- For Massey Ferguson tractor models 30, 35, 50, 65, 150, 178, 180, 235, 240, 245, 255, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 396, 398, 399, 670, 690, 698, 699, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 40E, 50E, 50H, 60H, Replaces Massey Ferguson OEM number 523552M1, 1862289M2, 1869665M1, 1870879M1, 190177M1, 514276M1, 521282M1, 533326M2, 1870074M1, 1672626M1, O.D: 5.05", I.D: 3.457", Internal teeth: 57, Sold Each, For a new version of this item use Item #: 114029, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460628) $7.01

Massey Ferguson 240 Clutch Finger Kit
Clutch Finger Kit
- This Clutch Lever Kit contains (10) 376123X1 nuts, (3) 891827M1 pins, (3) 889910M1 springs, (3) 887898M1 levers, (3) 891826M1 pins, (3) 1853164M1 bolts. For tractor models 135, 148, 155, 158, 165, 168, 178, 185, 188, 230, 240, 250, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 570, 590, 595, 675, 690, 698, 698T, 699. Used on 10 and 12 inch Double Clutch. (Item #: 173290, Ref: VPG6001) $34.70

Massey Ferguson 240 Clutch Fork Shaft, LH
Clutch Fork Shaft, LH
- This Clutch Fork Shaft is the left (long) side. It measures 1 inch in diameter by 5-17/32 inches long. It is used with: 184592M1 bushing, 886719M1 fork and 180449M1 RH shaft (each sold separately). Replaces 180444M1, 180444M2, 1679460M1 (Item #: 166103, Ref: 180444M1) $14.60

Massey Ferguson 240 Clutch Kit, Remanufactured
Clutch Kit, Remanufactured
- For Massey Ferguson tractor models 135 (UK), 231, 240, 261, 270, 275, 282, 283, 290, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 40, 40E, Clutch Diameter - 12", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Solid Offset, Clutch Type - 6 regular Pads, Pressure Plate Size - 12", Pressure Plate Levers - 3, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-5/8", Pressure Plate Splines - 25, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202057) $531.05

Massey Ferguson 240 Clutch Kit, Remanufactured, 3700167M91
Clutch Kit, Remanufactured, 3700167M91
- For Massey Ferguson tractor models 231, 240, 243, 253, 261, 263, 265S, 350, 355, 360, 362, 365, 375, 383, 390, Replaces Massey Ferguson OEM number 3700167M91, 3697162M91, 3701007M92, 3701003M92, 3701003M91, M3701003K1, For Release Bearing use Item #: 116891, (Item #: 210040) $610.74

Massey Ferguson 240 Clutch-Pressure Plate, Dual
Clutch-Pressure Plate, Dual
- Dual pressure plate, heavy springs, 12 inch with 25 spline 1 5/8 inch hub PTO disc. Replaces 1860005M1, 1868003M91, 1868005M91, 1868005M92, 3601268M91, 3610268M91, 3610268M92, 3610268V92, 1867438M91 (Item #: 163357, Ref: 3610268M91) $397.00

Massey Ferguson 240 Clutch Release Bearing Carrier Spring
Clutch Release Bearing Carrier Spring
- This Clutch Release Bearing Carrier Spring is used on many Massey Ferguson models. It is 2-1/8 Inch Overall Length. It replaces 1867690M1, 193334M1, 509230M2, 180451M1, 509230M2, 180451M2, 1867690M2. (Item #: 128535, Ref: 1867690M2) $4.30

Massey Ferguson 240 Clutch Release Carrier Fork Locking Screw
Clutch Release Carrier Fork Locking Screw
- This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $4.30

Massey Ferguson 240 Clutch Release Fork
Clutch Release Fork
- For tractor models 1200, 135, 135UK, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250 Brazilian, 253, 255, 261, 265, 270, 275, 282, 283 Brazilian, 290, 292 Brazilian, 297 Brazilian, 298, 299 Brazilian, 30B, 30D, 30E, 30H, 35, 35X, 375E Brazilian, 390E Brazilian, 40B, 40E, 415 Brazilian, 425 Brazilian, 435 Brazilian, 440 Brazilian, 445 Brazilian, 460 Brazilian, 465 Brazilian, 475 Brazilian, 481 Brazilian, 492 Brazilian, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65. Replaces 886719M1, 184628M1 (Item #: 179512, Ref: 886719M1) $58.00

Massey Ferguson 240 Clutch Release Shaft
Clutch Release Shaft
- For tractor models 1200, 135, 135UK, 148, 165, 168, 175, 178, 178UK, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 290, 298, 30B, 30D, 30E, 30H, 35, 35X, 375E, 390E, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65, TO35, MH50. This Shaft is 1 inch diameter X 3 19/32 inches long. (Item #: 165437, Ref: 180449M1) $7.80

Massey Ferguson 240 Clutch Release Shaft
Clutch Release Shaft
- For tractor models FE35, TO35, 165, 180, 20F, 240, 250, 270, 275 UK, 290 UK, 35, 40E, 50, 50E, 65. This shaft is 1 inch diameter x 5 17/32 inches long. Also replaces 1679460M1. (Item #: 166103, Ref: 180444M2) $14.60

Massey Ferguson 240 Clutch Spring
Clutch Spring
- For tractor models 135, 148, 165, 168, 175, 178, 185, 188, 240, 250, 265, 275, 290, 35, 375, 390, 398, 550, 565, 575, 590, 595, 65, 675, 690, 698. All with multi power transmissions. (Item #: 169497, Ref: 186519M1) $3.90

Massey Ferguson 240 Dual Clutch Kit
Dual Clutch Kit
- For Massey Ferguson tractor models 30, 165, 175 (U.K.), 178 (U.K.), 231, 240, 253, 261, 263, 270, 271, 275, 281, 282, 283, 285, 290 (U.K.), 670, 690, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 20, 20D, 20E, 20F, 30E, 40, 40E, Replaces Massey Ferguson OEM number 1866042M93, 1867431M91, 1867438M91, 1867440M91, 330001346, 3405678M91, 3599462M91, 3599462M92, 3599463M91, 3599463M92, 3599463V92, 3611842M91, 887889M1, 887889M92, 887889M93, 887889M94, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-5/8", Pressure Plate Splines: 25, Clutch Size: 12", Clutch Hub: 1-1/8", Clutch Splines: 10, Clutch Center: Solid, Clutch Type: Woven, Includes pilot bearing, release bearing and alignment tool, For Release Bearing use Item #: 119890, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112311) $355.00

Massey Ferguson 240 Independent PTO Clutch Pack Parts
Independent PTO Clutch Pack Parts
- Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.
NOTE

Massey Ferguson 240 Lever
Lever
- Clutch release lever, for split torque single clutch or dual clutch. For tractor models MF231, MF240, MF250, MF253, MF270, MF275, MF282, MF283 except Brazil, MF290, MF298, MF383, MF390, MF398, MF399, MF670, MF690, MF698, MF699 industrials: 20D, 30E, 40E, 50E. Replaces 1810817M91. (Item #: 178543, Ref: 887898M1) $6.20

Massey Ferguson 240 Pilot Bearing
Pilot Bearing
- For tractor models 1004, 1004T, 105, 1080, 1085, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 220, 2200, 230, 235, 240, 245, 25, 250, 253, 255, 260, 2620, 2625, 2640, 2645, 265, 2680, 2685, 270, 2720, 2725, 275, 282. Replaces OEM 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

Massey Ferguson 240 Pressure Plate
Pressure Plate
- Clutch pressure plate, external lugs for multi-power transmission, 3 required. For tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF290, MF298, MF375, MF390, MF398 industrial: 30. For 20D, MF135, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF35, MF50, MF65, TO35 (Item #: 155473, Ref: 185464M1) $8.50

No
Picture
Pressure Plate
- For Massey Ferguson tractor models 231, 231S, 240 (s/n N01001-earlier), 240 (s/n N01001-A20286), 240P, 250 (Used w/8-Speed Transmission), 261, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 40E, Replaces Massey Ferguson OEM number 3599463M92, Replaces manufacturer number 230-0015-42, (Item #: 166040) $330.00

Massey Ferguson 240 Pressure Plate Assembly
Pressure Plate Assembly
- For Massey Ferguson tractor models 240, 243, 253, 263, 670, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 30H, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-5/8", Pressure Plate Spline: 25, Pressure Plate Type: Single Stage, (Item #: 122851) $246.42

Massey Ferguson 240 Pressure Plate Assembly, Remanufactured
Pressure Plate Assembly, Remanufactured
- For Massey Ferguson tractor models 231, 240, 261, 270, 271, 275, 281, 282, 283, 285, 290, 383, 390, 451, 471, 481, 573, 583, 2605, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-5/8", Pressure Plate Spline: 25, Pressure Plate Type: Dual Stage, (Item #: 206861) $263.01

Massey Ferguson 240 PTO Clutch Disc, Remanufactured, 3900378M91
PTO Clutch Disc, Remanufactured, 3900378M91
- For Massey Ferguson tractor models 231 (Engine s/n E12095 - later), 240, 250, 251XE, 253, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 350, 355, 360, 362, 375, 383, 390, 398, 451, 471, 481, 533, 573, 583, 2605, Replaces Massey Ferguson OEM number 3900378M91, 1867386M91, 1486544M91, 1865836M91, 3478359M91, Clutch Size: 10", Clutch Hub: 1-5/8", Clutch Spline: 25, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206725) $96.01

Massey Ferguson 240 PTO Clutch Plate
PTO Clutch Plate
- Clutch Plate, external teeth, for independent PTO, 7 required. For tractors: MF240, MF265, serial number 9A349239 and up 2-speed only, MF270, MF275 serial number 9A349239 and up 2-speed only, MF290, MF298, MF360, MF375, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699 Industrials: 30E, 40E, 50E. For 50E, MF231, MF270, MF283, MF290, MF298, MF4800, MF4840, MF4880, MF4900, MF670, MF690, MF698, MF699. (Item #: 114030, Ref: 1870860M1) $5.20

Massey Ferguson 240 Release Bearing
Release Bearing
- Sealed Release Bearing for single and dual clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 1080, 1085, 1100, 1130, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 2200, 220, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 282, 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35. Replaces original part numbers 892862M2, 892862M1, 86534551 and 195508M1. (Item #: 112189, Ref: N1585) $22.00

Massey Ferguson 240 Release Bearing
Release Bearing
- Used in single and dual clutches. For tractor models (FE35, 1080, 1085, 135, 135 UK, 150, 165, 165 UK, 175, 180, 20E, 235, 240, 245, 253, 255, 265, 270, 285, 30E, 30H, 31. It has an inside diameter of 2.49 inches, an outside diameter of 4.06 inches, and is .82 inches wide. Please verify measurements before ordering.833084M1 (Item #: 112189, Ref: N1585) $22.00

No
Picture
Release Bearing
- This throughout bearing measures 2 1/2 inches inside diameter, 4 1/8 inches outside diameter and .830 inches wide. For tractor models 1500, 1505, 1800, 1805, 240, 250, 253, 285, 290. (Item #: 107274, Ref: N1174) $24.70

Massey Ferguson 240 Release Bearing Carrier
Release Bearing Carrier
- Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2) $21.70

Massey Ferguson 240 Trans. Disc, 12
Trans. Disc, 12
- Organic, rigid disc. Replaces 887889M94, 1.125 inch spline diameter, 10 spline. For tractor models 133, 135, 140, 148, 152, 155, 157, 158, 165, 168, 175, 177, 178, 188, 20, 20B, 20D, 20E, 20F, 20H, 230, 235, 240, 245, 250, 253, 255, 260, 265, 270, 275, 282, 283, 285, 290, 30, 30D, 30E, 30H, 40, 40B, 500, 50E, 550, 560, 575, 590, 670, 690. (Item #: 159009, Ref: 3599462M92) $60.00

Cooling System
Massey Ferguson 240 Fan Blade-Front
Fan Blade-Front
- 15-3/8 inches, square bolt pattern. For tractor models 135 UK (serial number 152UA5275>), 240, 250, 360, IND. 20D, 20E, 20F, 30E, 30H, 40E (2WD). (40005S) (Item #: 172313, Ref: 1884777M1) $13.30

No
Picture
Fan Blade Rear
- Fan blade, rear blade for 2-piece fan. For tractors: MF240. MF250, MF253 industrials: 20D, 30E, 40E. Use with blade 1884777M1. For 302, 304, 356, 50, 50A, MF65 (Item #: 173051, Ref: 1884738M1) $13.00

Massey Ferguson 240 Fan Shroud
Fan Shroud
- For Massey Ferguson tractor models 240 (s/n N01001-later, With Hydrostatic Steering), 253, Compatible with Massey Ferguson Construction and industrial models 30E (s/n 5218B0099-earlier), 30H (s/n 5109A0051-earlier), 40E (s/n 5218B0099-earlier), Replaces Massey Ferguson OEM number 1662126M95, (Item #: 163808) $61.00

No
Picture
Gasket
- For Massey Ferguson tractor models 20, 35, 35X, 40, 50, 135, 150, 154-4, 205, 230, 235, 240, 240P, 245, 250, 254-4, 302, 304, 364S (s/n D03066-early), 2135, 2200, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30B, 30D, 30E, 30H, 40E, 2200, 2500, 4500 Replaces Massey Ferguson OEM number 731210M1, , Compatible with Massey Harris tractor models 50, (Item #: 160354) $4.70

Massey Ferguson 240 Radiator
Radiator
- Radiator for MF tractors: (240, 250, 20D, 30E, 20F, 40E 2WD, 30H, all UK models). Core size: 15.375 inches wide, 18.5 inches high, 3 rows of tubes, 5 fins per inch. Replaces 1680547M92 1680547M91. (Item #: 101877, Ref: 1680547M92) $225.00

Massey Ferguson 240 Radiator
Radiator
- Core size 18.50 inches high, 15.125 inches wide, 3 rows of tubes, 8 fins per inch. For tractor models 253, (240 serial number A20286 and up with Hydrostatic Steering). (Item #: 119574, Ref: 3599709M92) $300.00

Massey Ferguson 240 Radiator Cap
Radiator Cap
- 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. Replaces 184528M1, 184528M91, 184528M1. Fits 135, 150, 165, 175, 180, 235, 240, 255, 35, 50, MH50, 65, 85, 88, TO20, TO30, TO35. (Item #: 112331, Ref: 180224M91) $6.81

Massey Ferguson 240 Radiator Cap
Radiator Cap
- This Radiator Cap is used on Massey Ferguson Models: 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 270, 275, 283, 285, 290, 298, 30D, 30E, 375E Brazilian, 390E Brazilian, 50E, 50EX, 550, 560, 565, 575, 590. It Replaces 1874445V93, 1874445M94, 1874455M93, 1874445M93, 1874445M93 (Item #: 165450, Ref: 1874455M93) $10.20

Massey Ferguson 240 Radiator Hose Lower
Radiator Hose Lower
- Hose, radiator lower. For tractors: MF231, MF240 except with hydrostatic steering, MF250 industrials: 20D, 30E. For 20D, MF135, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF35, MF50, MF65, TO35 (Item #: 159310, Ref: 1860374M2) $9.60

Massey Ferguson 240 Radiator Hose Lower
Radiator Hose Lower
- Hose, radiator lower. For tractor: MF240-4WD. For 750, 760, MF1100, MF1105, MF1130, MF1135 (Item #: 159450, Ref: 3698937M1) $12.90

Massey Ferguson 240 Radiator Hose - Upper
Radiator Hose - Upper
- For Massey Ferguson tractor models TO35 (s/n 204181-later), 35, 135 (UK), 230, 231, 240, 241, 250, 253, 265, 275, 565, 575, Replaces Massey Ferguson OEM number 186826M1, Replaces JCB OEM number CTJ3105, 10329404, Fits Engines: 4.236 and A4.236, ID: 1.375", ID: 1.437", Length: 6", For Hose Clamp use Item #: 130453, (Item #: 108423) $7.50

Massey Ferguson 240 Radiator Mounting Pads, Pack of 2
Radiator Mounting Pads, Pack of 2
- This pack of 2 radiator mounting pads is for tractor models 135, 20, 2135, TO35, 35, 230, (235, 245 except orchard), 240, 250, 253, 20C turf, 20D, 30E, 35, 40E, 202, 203, 204, 205. Two are used per tractor on the bottom of the radiator. (Item #: 109978, Ref: 180705M1) $2.30

Massey Ferguson 240 Shroud (Metal)
Shroud (Metal)
- Fits Models: 231, 240, 250, Industrial 20D, 30E. 897760M93, 1861222M1, 1860470M91, 1885721M92, 1885721M93, 1860470M92, 1860470M93, 897766M92, 1885721M94 (Item #: 155789, Ref: 1885721M94) $61.51

Massey Ferguson 240 Thermostat,180 Degree
Thermostat,180 Degree
- For: F40, FE35, TEA20, 150, Deluxe, TO35, 1080, 1085, 1100, 1105, 1130, 1135, 130, 135, 148, 150, 154, 1545, 165, 168, 175, 187, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20E, 2135, 2200, 2244, 230, 235, 240, 245, 250, 2500, 253, 254, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 30H, 320, 35, 350, 35X, 360, 362, 40, 40E, 4500, 470, 4830FC. Replaces 1446165V91, 1446127M1, 1446165M1, 1446127V91, 2485648, 1894961M1, 2485659, 325505M2, 32550, 1446165M91, 1446127M91, 2485666, 40085, 826306M1, 828139M1, 886000M1 (Item #: 110084, Ref: 1446165M91) $7.60

Massey Ferguson 240 Thermostat Body Cap
Thermostat Body Cap
- For 135, 20, 202, 203, 205, 20D, 20C, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 2500, 253, 30B, 30D, 30E, 30H, 35, 4040E, 4500. Thermostat Body Cap (Perkins Diesel) also replaces 37747581. (Item #: 155437, Ref: 731000M1) $33.00

Massey Ferguson 240 Thermostat Housing
Thermostat Housing
- Thermostat housing also replaces 37766361. For tractor models 135, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20D, 20F, 2135, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 254-4, 30B, 30D, 30E, 30H, 35, 40, 40E, 4500, 4830FC, 50, 5830, 5830FC, 5860, 5870. Replaces 746835M1, 37766361, 37766362, 37766363, 737192M1. (Item #: 173276, Ref: 746835M1) $67.00

Massey Ferguson 240 Thermostat Housing Gasket
Thermostat Housing Gasket
- Used on Perkins 212, 236 and 248 engines. Massey Ferguson models 165, 168, 174, 175, 178, 184, 185, 186, 187, 188, 194, 240, 255, 261, 265, 270, 273, 274, 274SK, 275, 283, 284, 285, 290, 293, 294, 30, 307, 30D, 31, 365, 373, 374, 375, 375E, 377, 383, 384, 387, 390E, 393, 394, 397, 425, 435, 440, 445, 487, 50, 506, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 99 (Item #: 112237, Ref: 36862151) $4.40

Massey Ferguson 240 Water Pump Gasket
Water Pump Gasket
- This Gasket is for 3641250M91 and other water pump backplates. Fits models 1004, 1014, 1080, 135, 148, 165, 168, 174, 175, 178, 184, 185 BACKHOE, 188, 194, 230, 240, 250 SKID STEER LOADER, 254, 255, 265, 273, 274, 275, 283, 284, 285, 290, 293, 294, 340, 342, 35, 350 INDUST/CONST, 352, 355, 360, 362, 372, 373, 374, 375, 377, 383, 384, 387, 390, 393, 394, 397, 550, 560 COMBINE, 565 COMBINE, 575 SKID STEER LOADER, 590, 595, 675, 690, 698. Replaces 3638177M1, 4224122M1, 4224387M1, 731165M1. (Item #: 163938, Ref: 4224387M1) $2.20

Massey Ferguson 240 Water Pump Gasket
Water Pump Gasket
- Used on Perkins 144 and 152 cubic inch, three cylinder engines. Replaces 957E8507, 72080255, 0941183, 731275M1, 4222931M1, 36862532 (Item #: 155091, Ref: 4222931M1) $1.90

Massey Ferguson 240 Water Pump Kit
Water Pump Kit
- This water pump repair kit fits the following tractor models: 2500, 20C, 20E, 20F, 203, 205, 2135, 30B, 30E, 30H, 40E, 135, 135UK, 148, 150, 154-4, 154-4S, 230, 231, 235, 240, 240P, 245, 250, 253, 254-4, 263, 340, 342, 350, 353, 353LX, 360 all with Perkins engines. It services pumps: 739527M91, 747542M91, and 742558M91. Replaces 731774M91 (Item #: 191242, Ref: 731774M91) $25.30

Massey Ferguson 240 Water Pump, Remanufactured, Z129K402
Water Pump, Remanufactured, Z129K402
- For Massey Ferguson tractor models 50, 60, 65, 135, 150, 175, 180, 240, 250, 302, 304, Compatible with Massey Ferguson Construction and industrial models 50, Replaces Massey Ferguson Casting number Z129K402, Includes Mounting Gasket, Without pulley or hub, Impeller Diameter: 3", (Item #: 206956) $71.01

Massey Ferguson 240 Water Pump Repair Kit
Water Pump Repair Kit
- Repairs, 3637411M91, 743065M91 water pumps. Replaces, 739013M91, 740212M91, 741964M91. For tractor models 165, 168, 174-4S, 175, 184-4S, 185, 188, 194-4F, 240, 265, 274, 274S, 274SK, 275, 284-4S, 285, 290, 294S-4S, 362, 373, 377, 383, 387, 393, 397, 440, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 675, 690. All the above with A4.212, A4.236 or A4.248 engines. (Item #: 173260, Ref: 3637482M91) $42.60

Massey Ferguson 240 Water Pump - With Pulley
Water Pump - With Pulley
- With 1/2 inch diameter shaft. For A4-236 diesel and A4-248 diesel in tractors: 175, 180, MF255, MF265, MF270, MF275, and other with Perkins A4.212 (LA), A4.236 (LD), A4.248 (LF), T4.236 (LJ) Engines. Replaces 743064M91, 3637411M91, U5MW0104, 3641832M91, 3640565M91, 3641219M91, 3637411M91, 4131A029, 41312566, 41312568, 41312489, 41312567, 4131A021, 4131A013, 41312756, 41312743, 41312161, 41312323, 41312366, 41312733, 41312554, 41312551, 41312561, 41312564, 41313232, 41313225. (Item #: 157623, Ref: 3641219M91) $63.00

Massey Ferguson 240 Water Pump - With Pulley
Water Pump - With Pulley
- This new water pump includes pulley part number 735034M1 with 3.125 inch hub diameter and a 1 5/8 inch pilot. The pulley has a square fan pulley mounting pattern. For tractor models 35, 50, 135, 150, 203, 205, 235, 245, 240, 20, 20C, 20E, 20F, 2135, 230, 231, 240, 245, 253, 360, 154-4, 30B, 30D, 30E, 30H, 40E, 2500, 254-4 all with PERKINS AD3.152 or AG3.152 engines. This is a new water pump. Replaces 3641338M91, 3641823M91, 37711330, 739527M91, 747542M91, U5MW0023, 41312487, 4132159, 735034M1, 735034V1, 747542M9. (Item #: 150185, Ref: 3641823M91) $42.00

Massey Ferguson 240 Water Temperature Gauge
Water Temperature Gauge
- For instrument panel on tractors: MF231, MF240, MF250, MF253, MF270, MF282, MF283 except Brazil, MF290, MF298, MF2775 to serial number 9R2805 to serial number 9R0726 Industrials: 20D, 30E, 40E, 50E, 50F. For 20D, 30E, 40E, 50E, 50F, MF231, MF240, MF250, MF253, MF270, MF2775, MF2805, MF282, MF283, MF290, MF298. (Item #: 104117, Ref: 1877719M92) $22.21

Decals and Emblems
No
Picture
Decal Set
- Decal Set (Hood Only) for Massey Ferguson Model 240. (Item #: 183569, Ref: R1348) $52.00

Massey Ferguson 240 Emblem
Emblem
- For Massey Ferguson tractor models 231, 231S, 240, 241, 271, 275 (UK), 281, 283 (UK), 285S, 290 (UK), 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, 9240, Compatible with Massey Ferguson Combine (s) 8780, Replaces Massey Ferguson OEM number 3701634T92, 3580033M91, (Item #: 114369) $18.50

Massey Ferguson 240 Hood Emblem
Hood Emblem
- For 20D, 20E, 20F, 240, 250, 270, 275, 283, 283 UK, 290, 290 UK, 298, 30E, 30H, 40E, 50E, 50F, 50H, 670, 690, 698, 699. Hood Emblem. (Item #: 104146, Ref: 1682944M1) $12.20

Drive Train
Massey Ferguson 240 8 Speed and Multi-Power Selector Parts (NON Synchromesh)
8 Speed and Multi-Power Selector Parts (NON Synchromesh)
- Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.
NOTE

Massey Ferguson 240 8 Speed Constant Mesh Transmission Parts
8 Speed Constant Mesh Transmission Parts
- Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.
NOTE

Massey Ferguson 240 8 Speed Synchromesh Selector Parts
8 Speed Synchromesh Selector Parts
- Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.
NOTE

Massey Ferguson 240 Axle Housing Shim .004
Axle Housing Shim .004
- This Axle Housing Shim measures .004 inches thick, inside diameter of 4 1/2 inches and outside diameter of 7 1/2 inches. For 12 bolt housings on models: FE135, FE35, F40, TO35, 135, 150, 230, 231, 235, 240, 240P. Instrials: 20, 20C, 20D, 202, 204, 2135, 2200, 30, 3165. (Item #: 172917, Ref: 183259M1) $4.10

Massey Ferguson 240 Axle Housing Shim .016
Axle Housing Shim .016
- .016 inch thick shim. 12 bolt. For tractor models FE135, FE35, F40, TO35, 135, 150, 230, 231, 235, 240, 240P. Instrials: 20, 20C, 20D, 202, 204, 2135, 2200, 30, 3165. (Item #: 173664, Ref: 183260M1) $4.00

Massey Ferguson 240 Axle Shim
Axle Shim
- This is a Steel Rear Axle Shim. It is .020 inches thick. It is used on Ferguson TEA20, TE20, TEF20, TO20, TO30, TO35, F40, Massey Harris 50, Massey Ferguson 35, 35 UK, 50, 135, 135 UK, 150, 230, 231, 235, 240, 245, 3165, 20, 202, 204, 2135, 20C, 20D, 30. It replaces original part number 183261M1. (Item #: 178176, Ref: 183261M1) $3.90

Massey Ferguson 240 Ball Bearing
Ball Bearing
- This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $21.80

Massey Ferguson 240 Bearing Cup, Differential
Bearing Cup, Differential
- For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $28.20

Massey Ferguson 240 Bearing Kit
Bearing Kit
- Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.00

Massey Ferguson 240 Bearing, Mainshaft
Bearing, Mainshaft
- For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 serial number up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Item #: 173116, Ref: 338552X1) $60.00

Massey Ferguson 240 Bearing, Needle
Bearing, Needle
- Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $9.60

Massey Ferguson 240 Bearing, Outer Input Housing
Bearing, Outer Input Housing
- 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Item #: 165439, Ref: 886668M1) $12.00

Massey Ferguson 240 Bearing, Pinion Pilot
Bearing, Pinion Pilot
- For tractor models 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11 x 38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11 x 38 differential, 590 with 11 x 38 differential, 65, 675, 690 with 11 x 38 differential, 765, FE35. Replaces 191250M1, 191250V1, 196098M1 (Item #: 117942, Ref: 191250M1) $29.20

Massey Ferguson 240 Bearing Seal and Collar Kit, Rear Axle
Bearing Seal and Collar Kit, Rear Axle
- Contains (1) shrink-on collar 180596M1 (3 inch x 2-1/4 inch x 11/16 inch), (1) axle bearing (cup 300975M1 and cone 195675M1), (1) inner axle seal 195678M2 (2-1/8 inch x 2-7/8 inch x 1/2 inch), (1) outer axle seal 195677M1 (2-3/4 inch x 3-5/8 inch x 19/32 inch). Fits where the above parts are used: TO35, F40, 133, 135, 135UK, 140, 148, 150, 20, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3 165, 340, 35, 35UK, 35X, 50, 550. Verify part numbers. Some of these models were build with more than one rear axle. (Item #: 182552, Ref: S.05948) $95.00

Massey Ferguson 240 Bearing, Transmission Mainshaft
Bearing, Transmission Mainshaft
- For tractor models (165 serial number 114352 and up with multipower transmission), (168 serial number 215803 and up with multipower transmission), (185 serial number 308909 and up with multipower transmission), (188 serial number 352835 and up with multipower transmission), (135 serial number 418436 and up with multipower transmission), (175, 178, 20B, 20D, 240, 250, 265, 275, 285, 290, 550, 565, 575, 590, 675 all with multipower transmission). (Item #: 173103, Ref: 834844M1) $12.90

Massey Ferguson 240 Carrier Assembly
Carrier Assembly
- For Epicyclic Pinion Gear. Models: 135, 150, (155, 158, 165 with Multi Power), 175, 20, 202, 203, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, (265, 275, 285, 290 with Multi Power), 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 35 serial number 365360->, 360, 362, 375, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, (550, 565, 575, 590 with Multi Power), 65, 6500, 765 serial number 609714->, FE135 Coventry. (Item #: 161568, Ref: 897711M93) $224.00

Massey Ferguson 240 Countershaft
Countershaft
- 8 speed transmission, 17/20 spline, 15 tooth, 12.250 inches long. For tractor models 1085, 135, 150, 1505, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 165986, Ref: 906472M2) $54.00

Massey Ferguson 240 Countershaft, Transmission, 17 Spline, 15 Teeth
Countershaft, Transmission, 17 Spline, 15 Teeth
- Shaft is 12.25 inches long. For MultiPower Transmissions on: 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 235, 240, 245, 250, 255, 265, 270, 275, 285, 290, 298, 30, 35, 50, 550, 565, 575, 590, 65, 765, FE135, FE35. (Item #: 173274, Ref: 189391M92) $161.22

Massey Ferguson 240 Coupler
Coupler
- Coupler, 3-13/16 inches long, 10 spline, 1 groove, rear drive shaft to pinion. For tractors: MF230 serial number 9A349239 and up, MH240 to serial number 2773N01001, MF240 standard, MF68, MF50, MH50, TO35 serial number 169467 and up. Industrial: 20D. We suggest measuring the pinion spline length and length of coupler to determine if 1683757M91 (4-5/16 inches long) was previously installed and whether 1871192M1 coupler is needed. (Item #: 113799, Ref: 1871924M1) $34.00

Massey Ferguson 240 Coupling, Rear Drive Shaft
Coupling, Rear Drive Shaft
- 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Item #: 160154, Ref: 1680189M1) $36.20

Massey Ferguson 240 Crown Wheel and Pinion Set
Crown Wheel and Pinion Set
- Ring has 38 teeth, shaft has 11 teeth, 10 spline. Approximately 9 7/8 inch- 9 15/16 inch total length. For tractor models 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 200 Series, 20E, 20F, 2200, 235, 24, 240 serial number N01001-A20286, 245, 25, 250, 2500, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275 UK, 281, 282, 285S, 290 UK, 30, 302, 304, 30E, 30H, 31, 3165, 360, 362, 365, 375, 390, 399, 40, 40E, 4500, 50, 50E, 50H, 50HX, 60H, 65, 6500, 670, 6800H. (Item #: 125330, Ref: 1664255M92) $332.00

Massey Ferguson 240 Detent Plunger
Detent Plunger
- This Detent Plunger is used on; 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces original part numbers 180418M1 and 180418M2. (Item #: 169495, Ref: 180418M2) $4.60

Massey Ferguson 240 Detent Plunger Spring
Detent Plunger Spring
- This Detent Plunger Spring is used with 180418M2 Detent Plunger. It is used on 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces 180417M1, 191221M1, 191221M2 (Item #: 165970, Ref: 180417M1) $2.00

Massey Ferguson 240 Differential Bearing and Cup RH
Differential Bearing and Cup RH
- Bearing and cup set Fits multiple Massey Ferguson Models. (159x108x21mm) Replaces 1850849M91, 1850909M91, 185251M1, 185252M1, 185252V1, 3039248M1, 3039249M1 (Item #: 150360, Ref: 185251M1) $146.00

Massey Ferguson 240 Differential Cross
Differential Cross
- sed with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson 894302M1, 6211999M1, 894302M2, 2746135M1, 2746135M2, 181276M1, 588731M1 (Item #: 113612, Ref: 894302M3) $14.00

Massey Ferguson 240 Differential Gear
Differential Gear
- The dimensions of this gear in inches are: A - 1 15/16, B - 4 1/2, C - 2 3/4, D - 15/16. It has 14 Teeth, and 39 Splines. Verify measurements before ordering. Used on Massey Ferguson models: 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160 Replaces 885517M1, 885518M1, 885518M4, 885518M2, 885518M5 (Item #: 166930, Ref: 885518M1) $56.00

Massey Ferguson 240 Differential Lock, Cam and Shaft Assembly
Differential Lock, Cam and Shaft Assembly
- For tractor models 135, 150, 20, 202, 204, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50, FE135, FE35. (Item #: 173127, Ref: 190960M92) $56.00

Massey Ferguson 240 Differential Lock Cap.
Differential Lock Cap.
- 10 lug. For tractor models FE35, 135, 150, 20, 20C, 20D, 202, 204, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50, FE135. (Item #: 172279, Ref: 190963M1) $84.00

Massey Ferguson 240 Differential Lock Coupler
Differential Lock Coupler
- 39 teeth, 10 lugs. For tractor models 135, 150, 20, 20C, 20D, 202, 204, 2135, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, FE135 Coventry. (Item #: 172311, Ref: 897036M1) $73.00

Massey Ferguson 240 Differential Pinion Gear
Differential Pinion Gear
- Verify that the gear you are replacing has 10 teeth and a 3.32 inch diameter. For tractor models 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160. Replaces 2746322M1, 897725M1 (Item #: 166937, Ref: 2746322M1) $24.80

Massey Ferguson 240 Differential Pinion Gear Thrust Washer
Differential Pinion Gear Thrust Washer
- Used with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson part numbers 181277M1, 514958M1, 885520M1, 3387281V1, 3387281M1 (Item #: 166940, Ref: 3387281M1) $1.50

Massey Ferguson 240 Differential Planetary Thrust Washer
Differential Planetary Thrust Washer
- Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 3/16 outside diameter and 0.053 inches thick. Used on 1080, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20C, 20D, 20F, 2135, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285, 290, 298, 30B, 30D, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 372, 375, 382, 390, 390T, 398, 399, 50, 550, 565, 575, 590, 595, 65, 675, 690, 698, 698T, 699, 85, 88, Super 90, TE20, TEA20, TED20, TEF20, TO20 Replaces OEM number 181247M1. (Item #: 173021, Ref: 181247M1) $11.50

Massey Ferguson 240 Differential Planetary Thrust Washer
Differential Planetary Thrust Washer
- Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $8.50

Massey Ferguson 240 Differential Ring and Pinion Set
Differential Ring and Pinion Set
- 9-7/8 inch Pinion Gear length. Differential, ring gear and pinion set. 37 and 6 tooth. For tractor models 30, FE35, TO35, 35, 35UK, 50, 135, 135UK, 230, 231, 235, 240, 245, 20, 20C, 20D, 2135, (3165 light duty) check pinion length. Replaces 1683757M91, 182115M91, 1885317M91, 1885317M92. (Item #: 116129, Ref: 531862M91) $313.00

Massey Ferguson 240 Differential Ring Gear and Pinion
Differential Ring Gear and Pinion
- Ring Gear and Pinion - (9 3/8 inch Pinion). 6 and 37 teeth. For tractor models: 135, 135 UK, 230, 231, 235, 240, 245, 3165, 20, 2135, 30, 20C, 20D, MF 35, MF 35 UK, MF 50. Replaces 1683757M91, 182115M91, 1885317M91, 1885317M92, 531862M91. (Item #: 133763, Ref: S.40897) $347.00

Massey Ferguson 240 Dipstick, Differential Oil Level
Dipstick, Differential Oil Level
- Verify length of 6 1/8 inches. For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30b, 30D, 30E, 360, 362, 375, 383, 390, 390T, 393, 398, 40, 40B, 40E, 50C, 50D, 50E, FE135 Coventry. Replaces 1665962M91, 1665962V91, 828810M91 (Item #: 163463, Ref: 1665962M91) $5.10

Massey Ferguson 240 Drive Shaft Retainer Assembly O-Ring
Drive Shaft Retainer Assembly O-Ring
- This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.20

Massey Ferguson 240 Drive Shaft Retainer Housing
Drive Shaft Retainer Housing
- For NON Multipower transmission. Fits 8 Speed transmission in: 135, 150, 165, 235, 240, 245, 250, 255, 265, 275, 383. Fits 8 or 12 speed transmission in: 360, 362, 375, 390, 390T, 398, 399. (Item #: 151853, Ref: 1693833M92) $99.00

Massey Ferguson 240 Gasket, Rear Axle Trumpet Housing
Gasket, Rear Axle Trumpet Housing
- Size is approximately 15-1/4 inches. Fits TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 180, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 2500, 30, 31, 3165, 35, 40, 50, 50, 65. (Item #: 151916, Ref: 183254M1) $4.50

Massey Ferguson 240 Gear, 1st
Gear, 1st
- This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS/DIESEL, 282 MEX. (Item #: 151282, Ref: 1682688M1) $483.00

Massey Ferguson 240 Gear, 2nd
Gear, 2nd
- This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $26.00

Massey Ferguson 240 Gear, 2nd and 4th
Gear, 2nd and 4th
- This gear is 2nd and 4th, for an 8 speed transmission. Gear is 36 and 46 teeth, 18 spline. For tractor models FE35, MH50, 1080, 1085, MF11, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 202, 203, 204, 205, 230, 235, 240, 245, 250, 2500, 255, 265, 275, 283, 285, 290, 30, 31, 3165, 35, 40, 40B, 50C, 50D, 550, 565, 575, 590 (65, 765 ALL with MULTI POWER), FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 179620, Ref: 1682691M1) $139.00

Massey Ferguson 240 Gear, 3rd
Gear, 3rd
- This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $27.20

Massey Ferguson 240 Gear, 3rd Mainshaft
Gear, 3rd Mainshaft
- 41 tooth, 18 spline. Used in 8 speed transmissions. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Replaces 1660094M1. (Item #: 165945, Ref: 1682690M1) $62.87

Massey Ferguson 240 Gear, 4th
Gear, 4th
- 32 teeth, 18 spline, Replaces 1660095M1. For tractor models 1085, 135, 150, 165, 235, 240, 245, 255, 265, 275, 285, 390T. (Item #: 125328, Ref: 1683360M1) $101.00

Massey Ferguson 240 Gear Lever Tension Spring
Gear Lever Tension Spring
- This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $2.50

Massey Ferguson 240 Gear, Reverse
Gear, Reverse
- For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $75.00

Massey Ferguson 240 Gear Shift Boot
Gear Shift Boot
- Inside diameter top = 5/8 inch, inside diameter bottom = 1-11/16 inch, height 4-3/8 inch. For tractor models 35, 50, 65, 135, 150, 165, 175, 240, 250, 253, 255, 265, 270, 275, (283 8/1993 and up), 290, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698. Replaces 1694127M1, 1694127M3, 1694127M4. (Item #: 151854, Ref: 1694127M1) $6.30

Massey Ferguson 240 Gear Shift Boot
Gear Shift Boot
- For tractor models 135, 135UK, 150, 165, 175, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 283UK, 285, 290, 298, 360, (375, 383, 390, 393, 396> serial number B06171), IND 20, 20C, 20D, 30, 31. Top hole 5/8 inch, bottom hole 2 inches. Replaces K929631. (Item #: 124263, Ref: 1678565M2) $3.00

Massey Ferguson 240 Gear Shift Cup and Lock Ring
Gear Shift Cup and Lock Ring
- This Gear Shift Cup (827690M1) and Lock Ring (827211M1) is used on Massey Ferguson 135, 135 UK, 231, 240, 250, 253, 360, 362, 375, 383, 390, 393, 396, 20D, 20E, 283 UK, 30E, 390T. Replaces 827690M1, 827211M1 (Item #: 173296, Ref: 827690M1) $33.20

No
Picture
Gear Shift Knob
- For Massey Ferguson tractor models 135, 150, 165, 175, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 1682623M1, 4 Speed, (Item #: 173635) $7.20

Massey Ferguson 240 Gearshift, Retainer Lock
Gearshift, Retainer Lock
- For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 172683, Ref: 1860761M1) $25.10

Massey Ferguson 240 Gearshift Selector
Gearshift Selector
- For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E, 50H. (Item #: 173128, Ref: 1862868M2) $34.70

Massey Ferguson 240 Gear Shift Spring Retainer
Gear Shift Spring Retainer
- This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Massey Ferguson 240 Gearshift Stop Plate
Gearshift Stop Plate
- For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 173117, Ref: 1860764M3) $4.50

Massey Ferguson 240 Gear, Transmission
Gear, Transmission
- 45 tooth, 20 spline. For tractor models 175, 270, 275, (240 constant mesh ratio 1.88), (290 Hi-Clearance), (165, 255, 265 Row Crops), (282 serial number up to 3K-D25608H), 20C Turf. (Item #: 172321, Ref: 906469M1) $98.71

Massey Ferguson 240 Gear, Transmission Pinion, 4th
Gear, Transmission Pinion, 4th
- 32 tooth. For tractor models (1085, 165, 235, 240, 245, 250, 255, 265, 270, 275, 283, 285, 298, 390T all with 8 speed transmission). (Item #: 125329, Ref: 1868010M1) $137.00

Massey Ferguson 240 Inner Axle Bearing
Inner Axle Bearing
- Measuring 1.024 inch inner width, 3.244 inch inside diameter, 4.941 inch outside diameter, this bearing is used on Massey Ferguson 1080, 1085, 135, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 265, 270, 275, 282, 283, 285, 290, 292, 295, 296, 297, 298, 299, 30, 30B, 30D, 30E, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 410, 420, 440, 445, 460, 465, 475, 492, 50, 50A, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 670, 675, 690, 698, 698T, 699. Verify measurements or OEM number. Many of the listed models have more than one rear axle configuration. Replace Massey Ferguson part numbers 1881931V91, 1881931M91, 894776M1, 588237M1, 27687, 27620 (Item #: 173235, Ref: 1881931M91) $58.00

Massey Ferguson 240 Input Housing Gasket
Input Housing Gasket
- This Gasket replaces part numbers: 188807M2, 512787M2 (Item #: 167235, Ref: 512787M2) $1.90

Massey Ferguson 240 Input Housing Shaft Seal
Input Housing Shaft Seal
- 1-1/8 inch inside diameter x 2-1/4 inch outside diameter. For tractor models (TO35, FE35 with single clutch), 135, 135 UK, 2135, 240, 3165, 65, MF35, MF50. (Item #: 178027, Ref: 195523M1) $4.80

Massey Ferguson 240 Input Shaft
Input Shaft
- This Input Shaft is used in 6 speed transmissions. It is 13.730 inches long and has 26 teeth and 10 splines. It replaces original part number 1862423M3 (Item #: 173299, Ref: 1862423M3) $213.00

Massey Ferguson 240 Input Shaft Abutment
Input Shaft Abutment
- This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $13.20

Massey Ferguson 240 Input Shaft Housing Gasket
Input Shaft Housing Gasket
- For tractor models F40, FE35, TO35, 135, 135 UK, 2135, 240, 3165, 65, MF35, MF50, MH50. (Item #: 166860, Ref: 180434M1) $1.30

Massey Ferguson 240 Layshaft Housing Gasket
Layshaft Housing Gasket
- This Layshaft Housing Gasket, also known as Bearing Housing Cap Gasket, is used on some 6 speed, Multi-power and 12 speed Syncromesh transmissions. It replaces OEM part numbers 1004633M1, 181237M1 (Item #: 169496, Ref: 181237M1) $1.40

Massey Ferguson 240 Main Drive Pinion
Main Drive Pinion
- 8 speed transmission, 18 teeth, 10 spline, 13.750 inches long. For tractor models 150, 20, 20C, 20D, 231, 235, 240, 240P, 245, (135 standard transmission). (Item #: 172344, Ref: 964926M3) $91.61

Massey Ferguson 240 Main Drive Pinion
Main Drive Pinion
- For tractor models 148, 168, 175, 185, 188, 20C, 20D, 240, 250, 255, 265, 270, 275, 282, 285, 290, 565, 575, 165 STANDARD TRANSMISSION. Main Drive Pinion for 8 speed transmission. Pinion is a 24 tooth, 10 spline, 13.750 inches long. (Item #: 170393, Ref: 964925M3) $156.00

Massey Ferguson 240 Main Input Shaft Inner Bearing
Main Input Shaft Inner Bearing
- This bearing is widely used in 12 Speed Synchromesh, Multi Power, 8 Speed Constant Mesh, and 8 speed Synchromesh transmissions. It measures 1 inch inside diameter, 1 5/16 inchs outside diameter, and is 1 inch long. Replaces Massey Ferguson part numbers 2700273V1, 2700273M1 (Item #: 187378, Ref: 2700273M1) $10.60

Massey Ferguson 240 Mainshaft
Mainshaft
- Multi power and 6 speed transmission, 18 spline, 12.250 inches long. For tractor models 1080, 1085, 135, 148, 150, 155, 159, 165, 168, 175, 180, 185, 188, 235, 240, 245, 250, 255, 265, 275, 285, 290, 30, 550, 565, 575, 590, (FE135 Coventry). Replaces 520701M3. (Item #: 165944, Ref: 1682542M1) $199.94

Massey Ferguson 240 Mainshaft
Mainshaft
- 8 speed transmission, 18 spline, 13.50 inches long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Item #: 125332, Ref: 1687643M1) $111.00

Massey Ferguson 240 Mainshaft, Heavy Duty, 8 Speed Trans.
Mainshaft, Heavy Duty, 8 Speed Trans.
- 22 tooth, 18 spline, 13.375 inches long. Replaces 1870151M1, 1682448M1. For tractor models 1080, 1085, 135, 148, 155, 158, 165, 168, 175, 180, 185, 188, 240, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 50E, 50H, 550, 565, 575, 590. Replaces 1682448M1, 1870151M1. (Item #: 125331, Ref: 1687642M1) $98.00

Massey Ferguson 240 Multipower Transmission and Related Parts
Multipower Transmission and Related Parts
- Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.
NOTE

Massey Ferguson 240 Oil Trough Assembly, LH
Oil Trough Assembly, LH
- For tractor models F40, FE135, FE35, 50, TO35, 150, 20, 202, 204, 20C, 20D, 2035, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50. Replaces 4246537M1, 825774M2, 825774M2 (Item #: 173161, Ref: 825774M2) $43.80

Massey Ferguson 240 Oil Trough Assembly, RH
Oil Trough Assembly, RH
- Used with differential lock. For tractor models FE135, 135, 150, 20, 20C, 20D, 202, 204, 2135, 2200, 231, 235, 240, 240P, 245, 30, 3165, 35, 50. (Item #: 173346, Ref: 191138M91) $8.50

Massey Ferguson 240 Outer Cover Seal
Outer Cover Seal
- Measuring 4.00 inches outside diameter x 2.875 inches inside diameter, 0.375 inches wide, this is the outer seal on cover. Replaces 894736M4, 834220M1, 894763M5, 894763M2, 894763M3, 894763M4, 3699800M1, 3699800M2, 73119909, 70657582, 0657582, 657582, 6V8172, 2X5156, 8T6917, 1B4327, 1D4327, 304816C91, 290811R92, 71855C1, 270380C91, 643986C91, B132704AB (Item #: 172312, Ref: 834220M1) $17.30

Massey Ferguson 240 Pinion Epicyclic Gear
Pinion Epicyclic Gear
- Replacing Massey Ferguson part numbers 894769M1, 894769V1, 897769M1, 184176M1, this Planetary Gear has 12 Teeth. It is used on tractors models: 135, 145, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 261, 265, 270, 275, 282, 283, 290, 30, 30B, 30D, 30E, 30H, 31, 3165, 375E, 390E, 40, 40B, 40E, 410, 420, 425, 430, 435, 440, 481, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 60, 60H, 65, 670, 675, 690, 765 (Item #: 170397, Ref: 897769M1) $48.80

Massey Ferguson 240 Pinion Gear
Pinion Gear
- For 135, 148, 150, 155, 158, 168, 175, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Pinion Gear for 8 speed transmission (28 tooth, 20 splines, 4.350 inch diameter). (Item #: 166038, Ref: 964916M1) $23.90

Massey Ferguson 240 Pinion Jam Nut, New Style
Pinion Jam Nut, New Style
- Used on Massey Ferguson models: 1004, 1004T, 1200, 1250, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US Built, 240, 245, 250, 253, 255, 260, 261, 265, 27, 275, 282, 282 US Built, 283, 285 (FR), 290, 290 US Built, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. This new style nut replaces 532956M1, 3596252M1 (Item #: 173348, Ref: 532956M1) $10.90

Massey Ferguson 240 Pinion Shaft, Transmission
Pinion Shaft, Transmission
- 17 teeth, 25 splines. For tractor models 135, 148, 150, 155, 158, 165, 168, 185, 188, 20, 20C, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D. Replaces 1868530M91. (Item #: 125326, Ref: 1868531M1) $98.00

Massey Ferguson 240 Planetary Cover Plate, Front
Planetary Cover Plate, Front
- For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Item #: 173500, Ref: 180408M2) $17.40

Massey Ferguson 240 Planetary Cover Plate, Rear
Planetary Cover Plate, Rear
- For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 180666, Ref: 184012M4) $20.50

Massey Ferguson 240 Planetary Pinion Gear Shaft
Planetary Pinion Gear Shaft
- The end of this shaft is threaded with a through hole for a Roll Pin. It measures 1.03 inches in diameter and is 3.26 inches long. Replaces Massey Ferguson part number 1864869M1. Used on Massey Ferguson models: 2500, 4500, 6500, 20E, 20F, 2200, 24, 25, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E. 50F, 50H, 60, 60H, 6500H, 6800H, 135, 150, 165, 165UK, 175, 175UK, 178, 180, 235, 240, 245, 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275UK, 281, 282, 283, 290, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 670, 690 (Item #: 170392, Ref: 1864869M1) $22.50

Massey Ferguson 240 Planetary Ring Gear Gasket
Planetary Ring Gear Gasket
- Two of these gaskets are used per planetary ring gear. Replaces Massey Ferguson part numbers 184182M3, 191141M1 (Item #: 128513, Ref: 191141M1) $7.80

Massey Ferguson 240 Planetary Ring Gear Thrust Washer
Planetary Ring Gear Thrust Washer
- Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref: 1866542M1) $3.50

Massey Ferguson 240 Planetary Selector Gearshift
Planetary Selector Gearshift
- For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref: 180446M1) $15.12

Massey Ferguson 240 Planetary Shifter Coupler
Planetary Shifter Coupler
- For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 30E, 30H, 31, 3120, 3125, 3165, 356, 360, 362, 375, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 6500, 85, 88, Super 90, FE135 Coventry. (Item #: 172682, Ref: 184770M3) $45.50

Massey Ferguson 240 PTO Coupler
PTO Coupler
- For Massey Ferguson tractor models 133, 135 (457632), 140, 148, 168 (257923), 230, 240, 253, 265, 275, 290, 340, 350, 355, 360, 362 (All With), Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 50, 50C, Replaces Massey Ferguson OEM number 3599630M91, (Item #: 125399) $44.10

Massey Ferguson 240 PTO Driven Gear
PTO Driven Gear
- For Massey Ferguson tractor models 230 (s/n 9A349239-earlier), 231, 235, 240 (s/n N01001-earlier), 240P, 245 (s/n 9A349239-earlier), Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, Replaces Massey Ferguson OEM number 532906M4, 32 Tooth, 21 Spline, Fits Tractors with Live PTO, (Item #: 166769) $77.31

Massey Ferguson 240 PTO Input Shaft
PTO Input Shaft
- For Massey Ferguson tractor models 230, 231, 240, 243, 250, 253, 255, 261, 263, 265, 275, 282, 283, 290, 340, 342, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 590, 4225, 4235, 4245, 4255, 4265, 4315, 4325, 4335, 4345, 4355, Replaces Massey Ferguson OEM number 1671705M1, 1671704M91, 1671705M2, 1671704M1, Replaces Landini OEM number 1860011M1, 1671705M1, 1671704M91, 16 Teeth, 25 Spline, (Item #: 166868) $193.00

No
Picture
PTO Lift Pivot Shaft
- For Massey Ferguson tractor models F40, TO35, 35, 35 (France), 35X (France), 50, 50 (Harris and Massey), 65, 135, 135 (UK), 150, 165, 165 (UK), 175, 175 (UK), 178 (UK), 180, 230, 231, 231S, 235, 240, 240 (S, Turkey), 245, 250, 255, 265, 265S (Turkey), 270, 271X, 271XE, 275, 275 (UK), 281, 281X, 281XE, 282, 283, 283 (UK), 283 (Brazil), 285, 285S (Turkey), 290, 290 (UK), 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 898304M91, (Item #: 176229) $7.30

Massey Ferguson 240 Pump to IPTO Clutch Shaft
Pump to IPTO Clutch Shaft
- Used on tractors with Independent PTO, this part replaces Massey Ferguson part number 1868539M1. Used on 1200, 1250, 148, 152, 158, 168, 188, 20E, 240, 250, 253, 265, 275, 285, 290, 298, 375E Brazilian, 390E Brazilian, 40E, 50E, 50EX, 50H, 50HX, 550, 565, 575, 590, 60H, 60HX, 698, 699. (Item #: 182625, Ref: 1868539M1) $129.00

Massey Ferguson 240 Rear Axle Housing Carrier Plate O-Ring
Rear Axle Housing Carrier Plate O-Ring
- Measuring 317.5mm inside diameter by 2.62mm thick, this o-ring is used on Massey Ferguson 1085, 1200, 1250, 135, 152, 155, 158, 165, 168, 175, 180, 185, 188, 20C, 20D, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 415, 425, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. Replaces OEM numbers 1860838M1, 1860838V1, 1860838M2 (Item #: 173237, Ref: 1860838M1) $4.80

Massey Ferguson 240 Rear Axle Oil Seal, Outer
Rear Axle Oil Seal, Outer
- This rear axle oil seal is for tractors with brake drums. Measures 2 3/4 inches inside diameter, 3 5/8 inches outside diameter and 19/32 inches wide. For tractor models TO35, 135, 230, 235, 240, 35, 50. (Item #: 108416, Ref: 195677M1) $6.10

Massey Ferguson 240 Rear Drive Shaft Needle Bearing
Rear Drive Shaft Needle Bearing
- Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $24.10

Massey Ferguson 240 Sealing Ring
Sealing Ring
- This sealing ring is 1-1/2 inch outside diameter and 3/32 inches wide. Two used per input shaft. Replaces Massey Ferguson part number 186581M1. (Item #: 165436) $6.60

Massey Ferguson 240 Seal, PTO Pinion Shaft Retainer
Seal, PTO Pinion Shaft Retainer
- This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Item #: 128472, Ref: 1860867M3) $5.70

Massey Ferguson 240 Seal, Rear Axle Oil, Inner
Seal, Rear Axle Oil, Inner
- This oil seal fits: [Industrial; as an inner rear axle shaft oil seal with dry brakes: 2135, 2200, 3165, MF20, MF20C, MF30 (2 used per tractor, sold individually)], as a transmission input shaft front cover oil seal: 85, 88, Super 90, [as an inner rear axle shaft oil seal with dry brakes: 135, 150, 202, 203, 204, 205, 230, 231, 235, 240, 245, 35, 50, F40, FE35, TO35 (2 used per tractor, sold individually)]; Replaces: 195678M1, 195678M2. 2.125 inches inside diameter, 2.879 inches outside diameter, 0.438 inches wide. (Item #: 108415, Ref: 195678M2) $6.20

Massey Ferguson 240 Shift Fork, 8 Speed
Shift Fork, 8 Speed
- For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $29.00

Massey Ferguson 240 Shift Fork, 8 Speed
Shift Fork, 8 Speed
- For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20E, 20R, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H. Shift Fork replaces 1862139M1. For 8 Speed. (Item #: 168885, Ref: 1860773M1) $53.00

Massey Ferguson 240 Shift Lever Locking Pin
Shift Lever Locking Pin
- This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Item #: 183009, Ref: 1678440M1) $1.10

Massey Ferguson 240 Shift Rail, 1st and Reverse
Shift Rail, 1st and Reverse
- Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Item #: 172890, Ref: 1678867M1) $44.30

Massey Ferguson 240 Shift Rail, 2nd and 4th
Shift Rail, 2nd and 4th
- Shift Rail, 2nd and 4th. Replaces 180438M2 For the following tractors: 135, 138, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11x38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11x38 differential, 590 with 11x38 differential, 65, 675, 690 with 11x38 differential, 765, FE35. (Item #: 172896, Ref: 1678866M1) $37.80

Massey Ferguson 240 Shift Rail, 3rd
Shift Rail, 3rd
- Replaces 1678865M1. For tractor models 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 31, 40, 40B, 50C, 50H, 50E. (Item #: 182886, Ref: 1678864M1) $41.30

Massey Ferguson 240 Side Cover Gasket
Side Cover Gasket
- This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $1.10

Massey Ferguson 240 Snap Ring - Internal
Snap Ring - Internal
- For Massey Ferguson tractor models TO35, 20, 30, 31, 35, 50, 135, 150, 165, 175, 178, 230, 235, 240, 245, 2135, 3165, Compatible with Massey Ferguson Construction and industrial models 20C, 30, 31, 40, 50, 50B, 65, Replaces Massey Ferguson OEM number 195222M1, (Item #: 169491) $3.30

Massey Ferguson 240 Tie Rod End, Rear
Tie Rod End, Rear
- Drag link end, rear, threaded portion to the tie rod is 5/8 diameter 18 threads and left handed threads. Length is 3 inches from end of threads to center of ball joint. For tractors: MF135, MF240, MF250 Industrials: 20D with adjustable axle, 2135 narrow axle. Replaces 969352M1. (Item #: 105134, Ref: 826752M92) $15.40

Massey Ferguson 240 Transmission Fill Plug
Transmission Fill Plug
- For tractor models TE20, TEA20, TO20, TO30, 35, 40, 50, 135, 231, 240, 250 2135. Replaces 768300M1, 180580M1 and 3799441M2. Plug has a 2.3 inch outside diameter flange. (Item #: 115163, Ref: 9N7010) $6.80

Massey Ferguson 240 Transmission Rear Axle Gasket
Transmission Rear Axle Gasket
- This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $7.80

Massey Ferguson 240 Transmission to Differential Shaft Spring
Transmission to Differential Shaft Spring
- Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $9.80

Electrical System
Massey Ferguson 240 Alternator
Alternator
- 12 volt, 55 amp. For tractor models (154 1986-89), (184 1986-89 with 236 dsl), (194, 194-4 1993 on), (240 1983-99 with 152 dsl), (243 1999-00), (245 1977-82 with 152 dsl), (250 1983-86 with 152 dsl), (253 1988-99 with 152 dsl), (254 1982-87 with 152 dsl), (255 1977-82 with 236 dsl), (260, 263T 1993 on), (300 1987-on), (360 1986-92 with 152 dsl), (364 1989-93 with 152 dsl), (365 1990-96), (373 1990-96), (374 1989-99 with 236 dsl), (375 1986-98 with 236 dsl), (377 1987-96), (383 1986-89 with 248 dsl), (384 1989-92 with 236 dsl), (387 1987-92), (390 1993-98 with 248 dsl), (390 1987-92 with 248 dsl), (390T 1989-98 with 236 dsl), (393 1992-94 with 236 dsl), (394 1989-93 with 248 dsl), (396 1992-98), (397, 397T 1989-96), (398 1987-97 with 236 dsl), (399 1987-98 with 354 dsl), (699 1984-86 with 354 dsl). Replaces 24157. (Item #: 117400, Ref: ALU0024) $119.00

Massey Ferguson 240 Alternator
Alternator
- 12 volt, 65 amp. For tractor models (240 1983-99 with 152 dsl), (360 1986-92 with 152 dsl), (362 1990-92 with 236 dsl), (365 1990-96), (368 1986-92 with 236 dsl), (375 1986-98 with 236 dsl), (383 1986-98 with 248 dsl), (390 1987-98 with 248 dsl), (390T 1989-98 with 236 dsl), (393 1995-98 with 236 dsl), (396 1992-98), (398 1987-97), (399 1987-92 with 354 dsl), (4225, 4233, 4235, 4243, 4245, 4253, 4255, 4260, 4263, 4270 1997-00 with 1004.4 dsl). Replaces 24199, 24294. (Item #: 112389, Ref: ALU0010) $117.00

Massey Ferguson 240 Alternator
Alternator
- 12 volt, 34 amp. For tractor models (240 1983 to 1999 with 152 diesel), (243 1999 to 2000), (250 1983 to 1986 with 152 diesel), (253 1988 to 1999 with 152 diesel), (254 1982 to 1987 with 152 diesel), (163T 1993 and on), (270 1983 to 1986 with 236 diesel), (290 1983 to 1986 with 248 diesel), (670 1983 to 1986 with 236 diesel), (690 1983 to 1986 with 248 diesel), (698, 698T 1983 to 1986 with 318 diesel). Replaces 24087. (Item #: 111064, Ref: ALU0023) $121.00

Massey Ferguson 240 Alternator - Iskra Style
Alternator - Iskra Style
- For Massey Ferguson tractor models 240, 265, 290, 550, 690, 3060, Replaces Massey Ferguson OEM number 3933144M91, 3467043M91, 3581388M1, 3930502R91, 3619489M11, Replaces manufacturer number 282-413, IA 0692, AAK4553, 11.201.692, Iskra Style, Voltage: 12, Rotation: Clockwise, Amperage: 65, Regulator: Internal, (Item #: 157455) $333.00

Massey Ferguson 240 Alternator, Lucas
Alternator, Lucas
- 12 volt, 35 amp. For tractor models 20D, 20E, 240, 250, 270, 283, 290, 298, 30E. (Item #: 111064, Ref: 1897264M91) $121.00

No
Picture
Battery Door
- For Massey Ferguson tractor models 240 (with dry air filter and air intake under hood), 250, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 40E, Replaces Massey Ferguson OEM number 1674980M93, 1674980M92, 20.5" x 8.5" x 2.875" Tall, (Item #: 173667) $67.00

Massey Ferguson 240 Battery Door Without Hole
Battery Door Without Hole
- For Massey Ferguson tractor models 20, 30, 40, 240, 250, Replaces Massey Ferguson OEM number 1893487M92, Doesn't Include Hole, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 155793) $46.30

Massey Ferguson 240 Combination Light and Horn Switch
Combination Light and Horn Switch
- For Massey Ferguson tractor models 231, 240 (s/n A20286-later), 240P, 261, 271, 281, 282, Compatible with Massey Ferguson Construction and industrial models 20E, 20F, 25, 30E, 30H, 40E, 50E, 50F, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 1668816M2, 1425878M91, 1699034M1, 963757M2, 964248M1, 1668816M1, With Knob, 5 Terminal, (Item #: 121148) $12.00

Massey Ferguson 240 Control Box, 12 Volt
Control Box, 12 Volt
- Control box is for tractors with a generator and Standard Motor gas engines. Replaces OEM numbers: 829951M91, 1050840M91. For tractor models 20E, 240, 275UK, 283UK, 290UK and TE20, TEA20, TO20, TO30, TO35. (Item #: 172665, Ref: 1890130M91) $59.00

Massey Ferguson 240 Ignition Switch
Ignition Switch
- Switch, starter and heat, 6 prongs, includes 2 keys. For tractor models 231, 240, 250, 282, 290, 360, 362, 383, (390T serial number up to B18009), 393, 3505, 3525, 20F, 30E, 30H, 40E, 50E, 50F, 50H, 50HX, 60H. Replaces 1446116M1, 1446116M91, 1874120M91, 1874120M93, 1874535M3, 1874535V3, 3387319M1, 34228, 3533928M91, 3536550M92, 3536550M93, 35670.1874120M91 (Item #: 111509, Ref: 3107556R92) $9.80

Massey Ferguson 240 Neutral Safety Switch
Neutral Safety Switch
- This Neutral Safety Switch has blade type terminals. For tractors: MF240*, MF250*, MF253, MF282, MF283 except Brazil, MF298*, MF360, MF362, MF375, MF383, MF390, MF393, MF398, MF399 industrial: 40E*. *Optional with 3381094M1. Replaces 888501M2, 963417M2, 1012043M91, 1679 223M2, 1679223M1, 1679223M2, 3381094M1, 34198, 39121, 39855, 963417M2, SMB497. (Item #: 164579, Ref: 1679223M2) $24.50

No
Picture
Oil Press Switch
- Oil Pressure Switch. For tractors: MF154S, MF174S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF270, MF274-4, MF282, MF283 except Brazil, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF3050 to serial number V173002, MF 3060 to serial number V173002, MF 3070 to serial number V173002, MF 3090 to serial number V173002, MF3505, MF3525, MF3545, MF3630, MF3650 Industrials: 20D, 30E, 40E, 50E. Replaces 1423895M91, 1877721M92. For 750, 760, 850, 860. (Item #: 151010, Ref: 3599307M91) $8.30

Massey Ferguson 240 Starter
Starter
- 12 volt, 10 tooth, clockwise rotation. For tractor models (506 from 1971 up), (520, 525 1971-79), (620, 625 1971-72), (168 1971-72 with 236 dsl), (175S, 185 1970-72), (178 1970-72 with 248 dsl), (188 1972-74 with 248 dsl), (240 1983-99 with 152 dsl), (250 1983-86 with 152 dsl), (261 1992-98), (271, 281 1998-00 with 1004.4 dsl), (270 1983-86 with 236 dsl), (283 1983-99 with 248 dsl), (290 1983-86 with 318 dsl), (298 1983-86 with 318 dsl), (365 1990-96), (375 1986-98 with 236 dsl), (383 1986-98 with 248 dsl), (390 1987-98 with 248 dsl), (396 1992-98 with 1006.6 dsl), (398 1987-97 with 236 dsl), (399 1987-98 with 354 dsl), (670 1983-86 with 236 dsl), (690 1983-86 with 248 dsl), (698, 698T 1983-86 with 318 dsl), (699 1984-86 with 354 dsl), (3050 1987-89 with 236 dsl), (3060 1987-93 with 248 dsl), (3070 1987-93 with 236 dsl), (3610, 3630 1987-90 with 354 dsl). Replaces 26410, 26274, 26366, 27539. Verify numbers on starter before ordering. (Item #: 112303, Ref: SLU0005) $166.00

Massey Ferguson 240 Starter
Starter
- This starter comes with solenoid, is for 12 volts, clockwise rotation, 10 teeth, 3 KW and LEFT HAND MOUNT. For models 1014, 1020, 1114, 155, 158, 165, 168, 175, 178, 185, 188, 240, 265, 275, 290, 298, 3050, 3060, 3065, 3070, 3075, 362, 365, 372, 375, 382, 390, 396, 398, 399, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 431, 4325, 4335, 4345, 4355, 4360, 4365, 481, 492, 506 and other combine models. Replaces 3821818M93, 3821818M94, 4225326M91 and Perkins numbers 3873K405 and 2873K625. (Item #: 118485, Ref: 3821818M91) $191.37

Massey Ferguson 240 Starter Assembly
Starter Assembly
- 12 volt, diesel, 10 teeth, 2.7KW. For tractor models MF30, MF50, MF165, MF174, MF174C, MF194, MF265, MF270 MF275, MF285, MF290, 6500, 7500, 8500. Replaces Lucas, 26413, 27411, 27433, 27539, 26410 LRS190R, 26412, 26412R, LRS190, 27432, 26264, 26154, 26264R. 1680065R3, 1680065M3, 1680065M1, 26264R, 26412R, 27432R, 3.93E+07, 26412, 26220, 3597371M2, 3597426M3, 3597426M2, 968856M1, LRS190R, 3930505R1, 1868285M3. Left side mount. (Item #: 157974) $154.00

Massey Ferguson 240 Starter, LH Mount
Starter, LH Mount
- Left Hand Mount. Order 3763363M91 if you have a Right Hand Mount. Has 3.5 Inch center-to-center bolt pattern. Replaces; 3597371M2, 1868283M3, 1868283M5, 1691805M1, 1691805M2, 3027466M1, 3609526M91, 1680065M1, 1680068M1, 3763363M92. Replaces Lucas: 26274, 26274A, 26274A/D, 26274D, 26274E, 26274E/F, 26274H, 26274H/N, 26295, 26295A, 26295A/B, 26295B, 26295D, 26295D/E, 26295E, 26295F/M, 26320, 26320A/B, 26320D, 26323, 26323A, 26345, 26345A/B, 26345D/J, 26366, 26366A/F, 26410, 26410A, 26410A/B, 26410B, 26414, 26414A/E, 26414E, 26925193A, 26925193D, 27515, 27515A, 27515A/E, 27515E, 27523, 27529, 27539A, 27539B, 27539C, 27539D, 27539E, 27572, 27572B, 27572D, 27578, 27578A, 27578B, 27578D, 27583, 27583A, 27583B, 27583D, 27583H, 27583J, 27599A, NSB531, NSB540, 26404, 26404A, 27536 (Item #: 112303) $166.00

Massey Ferguson 240 Starter, RH Mount
Starter, RH Mount
- New Lucas Style Starter Assembly 5 inch with solenoid, cold climate. For tractors: MF231, MF240, MF250, MF253, MF360 Industrials: 20D, 20E, 30H, 40E. Replaces 1691805M2, 1868283M5. Can replace 3597371M2, 1680065M3 and 3597426M2 Hitachi Starters on above models. Replaces Lucas 26365, 27546, 26411, 26344, 27540, 26273, 27571, 27584 (Item #: 156138, Ref: 3763363M91) $195.00

Massey Ferguson 240 Switch
Switch
- Switch, neutral safety, has blade type terminals. For tractors: MF25, MF130, MF231, MF240*, MF250*, MF270, MF290, MF298*, MF670, MF690, MF698, MF3505, MF3525, MF3545 industrials: 20D, 30E, 40E*. *Optional with 1679223M2. Also used for differential lock s (Item #: 164579, Ref: 3381094M1) $24.50

Massey Ferguson 240 Switch, Lamp and Horn
Switch, Lamp and Horn
- Lucas type. Used on 135, 148, 165, 168, 175, 178, 185, 188, 230, 235, 240, 245, 250, 255, 265, 275, 290, 298, 35, 35 Gas / 35 Petrol, 35X, 375E Brazilian, 390E Brazilian, 50, 50E, 50EX, 565, 575, 590, 65, 765. Replaces 882283M1, 54033364, 34952 (Item #: 124742, Ref: 1502378C1) $19.50

Massey Ferguson 240 Switch With Keys
Switch With Keys
- Switch, starter and heat, 6 prongs, includes 2 keys. For tractors: MF231, MF240, MF250, MF253, MF270, MF282, MF290, MF298, MF360, MF375, MF383, MF390, MF398, MF3050, MF3060, MF3070, MF3090, MF3505, MF3525, MF3545, MF3630, MF3650, MF3680 industrials: 20D 1874535M3 (Item #: 111509, Ref: 3107556R92) $9.80

No
Picture
Turn Signal/Flasher Switch
- For Massey Ferguson tractor models 231, 240, 240P, 261, Compatible with Massey Ferguson Combine (s) 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 20E, 25, 30H, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 881670M1, Replaces manufacturer number AV103062, CV103062, (Item #: 174293) $19.30

Engine Bearings
Massey Ferguson 240 Clevis Boot - Differential Lock
Clevis Boot - Differential Lock
- For Massey Ferguson tractor models 135 (s/n 9A130003-later), 165, 175, 180, 235, 240, 245, 250, 255, 265, 275, 285, 362, 365 (s/n B18009-earlier), 375, 390, 390T, 398, 399, Replaces Massey Ferguson OEM number 906811M1, (Item #: 167258) $3.50

No
Picture
Gasket - Steering Box
- For Massey Ferguson tractor models 35, 35X, 135, 148, 230, 231, 240, 250, Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 30E, Replaces Massey Ferguson OEM number 1891676M1, 1850038M1, 1893620M1, (Item #: 168940) $2.50

Massey Ferguson 240 PTO Friction Disc
PTO Friction Disc
- For Massey Ferguson tractor models 240 (s/n A20286-later), 253, 263, 265S, 362 (s/n B33001-later), 375 (s/n B33001-later), 383 (s/n B33001-later), 390 (s/n B33001-later), 396 (s/n B33001-later), 398 (s/n B18009-later), 399 (with 1006.6 Engine), 690, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, Replaces Massey Ferguson OEM number 1688532M1, 1688532V1, (Item #: 155524) $22.10

Massey Ferguson 240 PTO Housing Retainer
PTO Housing Retainer
- For Massey Ferguson tractor models 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 393, 398, 399, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 532880M1, Use with PTO seal 834216M1, Rear PTO Housing Retainer, For PTO seal use Item #: 107013, (Item #: 151852) $53.00

No
Picture
PTO Hydraulic Clutch Seal, Inner
- For Massey Ferguson tractor models 135 (UK), 165 (UK), 240, 253, 263, 265 (s/n 9A349239-later), 270, 275 (s/n 9A349239-later), 290, 298, 360, 362, 365 (s/n B18009-earlier), 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 40E, 50E, 50H, 50HX, 60H, Replaces Massey Ferguson OEM number 1870858M1, Replaces manufacturer number VPH5201, O.D.: 2.441", Width: .151", (Item #: 173691) $6.30

Massey Ferguson 240 PTO Oil Seal
PTO Oil Seal
- For Massey Ferguson tractor models 135, 148, 155, 165, 168, 185, 188, 230, 240, 250, 265, 275, 285 (With A4.248 Engine), 290, 340, 342, 350, 355, 360, 362, 365, 375, 550, 565, 575 (UK Model), 590 (UK Model), Replaces Massey Ferguson OEM number 1860011M1, VPH1407, 360, 362, 365, 375, 550, 565, 575, 590, (Item #: 152374) $3.80

No
Picture
PTO Shaft Bushing
- For Massey Ferguson tractor models 165 (UK), 230, 231, 235, 240 (s/n: A20286-earlier), 240 (S), 240P, 245 (s/n: 9A349239-earlier), 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 281, 282, 283, 290, 360, 365 (s/n: B18009-earlier), 375, 383, 390, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 40, 40B, 40E, Replaces Massey Ferguson OEM number 532883M1, (Item #: 174198) $20.40

No
Picture
Rod Bearing Set
- For Massey Ferguson tractor models 20, 35, 40, 50, 135, 150, 154-4, 230 (s/n 9A349239-earlier), 231S, 235, 240 (s/n N01001-earlier), 241, 245 (s/n 9A349239-earlier), 250, 251XE, 253, 254-4 (s/n 22210641-earlier), 254-4 (s/n 22210641-later), 263, 360, 451, 2135, 2200, 3315, 3330, 3340, 3350, 3355, Compatible with Massey Ferguson Construction and industrial models 20F, 30B, 30D Replaces Massey Ferguson OEM number 737071M91, , Compatible with Massey Harris tractor models 50, Replaces OEM number 31131172, Set of 3, 6 Halves, (Item #: 166853) $9.80

Massey Ferguson 240 Sealing Ring
Sealing Ring
- For Massey Ferguson tractor models 20, 30, 31, 35, 35X, 135, 148, 150, 165, 175, 178, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 298, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 420, 440, 492, 550, 565, 575, 590, 595, 670, 675, 690, 698, 699, Replaces Massey Ferguson OEM number 3699909M1, 907315M2, 3609471M1, 3699909V1, 186198M1, 2" O.D. x 3/32", (Item #: 165441) $6.90

Massey Ferguson 240 Seal Kit
Seal Kit
- For Massey Ferguson tractor models 65, 135, 150, 165, 230, 235, 240, 250, 253, 255, 265, 275, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30E, 40, 40B, 40E, 50C, 202, 203, 204, 205, 302, 304, 2135, 3165, Replaces Massey Ferguson OEM number 2528203K1, 1665685M1, 1665685M91, 2528204K1, 3761475M1, 3761478M1, 44R692, VPK3504, Includes Seal and O-Ring, For Use With use Item #: 163460, (Item #: 128549) $7.80

Massey Ferguson 240 Thrust Washer Set - 4 Pieces
Thrust Washer Set - 4 Pieces
- FOR AD3.152 Perkins Gas and Diesel. With engine serial number less than 2820092. (Item #: 107167, Ref: 31137211_21) $6.20

Massey Ferguson 240 Thrust Washers - Set of 4 Halves
Thrust Washers - Set of 4 Halves
- FOR AD3.152 Perkins Diesel. Engine serial number 8504190> with offset tab and Perkins 6.354 Diesel Engine. Set of 4 halves, makes 2 complete thrust washers. (Item #: 31137551) $12.44

Engine Gaskets
Massey Ferguson 240 Lip Seal Housing Gasket
Lip Seal Housing Gasket
- For Massey Ferguson tractor models 135, 148, 150, 154-4, 155, 158, 165, 203, 205, 230, 235, 240, 245, 250, 253, 254, 254-4, 255, 260, 302, 304, 342, 350, 353, 360, 363, 550, 560, Replaces Massey Ferguson OEM number 3641894M1, 741378M1, 33826111, (Item #: 169750) $23.75

Massey Ferguson 240 Rear Head Cover Gasket
Rear Head Cover Gasket
- For Massey Ferguson tractor models 20, 30, 35, 35X, 40, 50, 50A, 65, 80, 135, 150, 154, 154-4, 165, 230, 231, 235, 240, 245, 250, 254, 254-4, 255, 302, 304, 360, 364S, 399, 699, 1100, 1105, 1130, 1135, 2135, 2200, 2640, 3090, 3165, 3505, 3525, 3545, 3630, 3650, Compatible with Massey Ferguson Combine (s) 300, 510, 550, 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 20, 40, 80, 203, 2200, 2500, 4500 Replaces Massey Ferguson OEM number 4222004M1, 731128M1, , Compatible with Oliver tractor models 1850 Replaces Oliver OEM number 159070A, , Compatible with White tractor models 2-85, 2-88, 2-105, 2-110, Replaces White OEM number 159070A, Replaces Perkins OEM number 36851416, 490485, (Item #: 113596) $13.90

Massey Ferguson 240 Rope Seal Housing Gasket
Rope Seal Housing Gasket
- This Rope Seal Housing Gasket is used on Perkins 144, 152 and 203 cubic inch, three and four cylinder engines with rope type rear seals. Replaces part numbers 957E6344A, 83934357, 136817168, 36817134, 36817168, 27847, 734664M1, 36817134, 734664M91, 4222068M1, 4222068V1 (Item #: 168419, Ref: 36817134) $4.80

Massey Ferguson 240 Seal, Rear Main
Seal, Rear Main
- FOR AD3.152 and 6.354 Perkins Diesel Engines. 5.394 inch X 6.260 inch X .433 inch. 303158411 (Item #: 107230, Ref: 1447049M91) $19.50

No
Picture
Steering Shaft Seal, Felt
- For Massey Ferguson tractor models 35, 35X, 133, 135, 140, 148, 158, 230, 231, 235, 240, 245, 250, 255, 260, Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 30E, Replaces Massey Ferguson OEM number 1850020M1, 1850020V1, Power Steering, (Item #: 168938) $2.00

Massey Ferguson 240 Timing Case to Block Gasket
Timing Case to Block Gasket
- Gasket for the timing case to block for tractor models Massey Ferguson 35, 135, 148, 230, 240, 250, 254, 254S, 255, 350, 353, 550, 363, and 253 with Engines A3.152 AD3.152 AT3.152 AT3.152.4 Replaces 36814119. Priced each. Price shown is for 2, sold only in multiples of 2 items. (Item #: 168423, Ref: 734238M1) $12.60

Massey Ferguson 240 Timing Cover Gasket
Timing Cover Gasket
- Used with 3637397M91 timing Cover. Replaces 4224397M1, 36813136, 734661M1 (Item #: 168135, Ref: 734661M1) $9.40

Massey Ferguson 240 Valve Cover Gasket
Valve Cover Gasket
- This gasket is used on multiple Massey Ferguson models with Perkins 212, 236 and 248 4 cylinder Perkins Diesel Engines. It replaces original part numbers 21826363, 3638461M1, 3638482M1, 36811114, 36811122, 36811126, 36811131, 36811132, 36811133, 3681A011, 3681A026, 3681A027, 4223924M1, 746714M1, 748277M1 (Item #: 128689, Ref: 737225M1) $10.70

Massey Ferguson 240 Valve Cover Gasket
Valve Cover Gasket
- This Valve Cover Gasket is used on Tractors: 135, 150, 230, 235, 240, 245, 250, 253, 360 and Industrial Series 20, 203, 205, 2135, 2200, 154-4, 20C, 2500, 254-4, 30B, 30D, MF 40 All with Perkins 152 cubic inch gas or diesel engines. Replaces original part numbers 36811115, 735057M1, 033 - 7689, 2130099, 28108, 72080111 (Item #: 158290, Ref: 735057M1) $5.70

Engine Rebuild Kits
No
Picture
Cylinder Sleeve
- For Massey Ferguson tractor model 240, Replaces Massey Ferguson OEM number 31358384, 745243M1, 745243V1, (Item #: 176974) $21.10

Massey Ferguson 240 Engine Overhaul Kit with New Crankshaft
Engine Overhaul Kit with New Crankshaft
- Comprehensive Kit AD3-152 3 Cylinder DIESEL DIRECT Injection. Identify by: inclined injectors, LIP TYPE REAR SEAL, 5 ring piston 3.6 inch bore from engine number 152UA391046DL. Including New Crankshaft. Kit includes pistons, wrist pin bushings, piston rings, liners, con rod bearings, con rod lock nuts (where fitted), top and bottom gasket sets, main bearings, thrust washers, front and rear seals AND A NEW CRANKSHAFT. FOR MODELS MF135, MF230, MF235, MF240. NOTE: BLOCKS AVAILABLE FOR THIS ENGINE - SEE PART NUMBER ZZ50283. (Item #: 183668, Ref: EKMC8) $1119.01

No
Picture
Valve Overhaul Kit, Perkins 152 Diesel
- Valve Overhaul Kit. 35 degree face angle valves. Contains intake and exhaust valves, springs, keys and guides. For 20C, 30B, MF235, MF240 MF245, MF250. (Item #: 120223, Ref: VOKP152B) $52.00

Engine Parts
Massey Ferguson 240 Bushing, Connecting Rod
Bushing, Connecting Rod
- FOR AD3.152 Perkins Diesel. Models: 1007, 1014, 1080, 1085, 1100, 1105, 1130, 1135, 1155, 1200, 135, 148, 152, 165, 175, 194, 20, 20C, 230, 235, 240, 250, 253, 254, 254S, 255, 2675, 2680, 2685, 2745, 275, 285, 290, 298, 30, 300, 302, 304, 3065, 3070, 3075, 3085, 3090, 3095, 30B, 3115, 3120, 3120T, 3125, 3140, 3165, 3370, 340, 342, 350, 353, 3530*, 356, 3625, 3630, 3635, 3645, 3650, 3655, 3660, 390T, 396, 398, 399, 40, 40B, 4225, 4235, 4245, 4255, 4260, 4270, 440, 50, 50B, 50C, 520, 525, 535, 540, 550, 560, 560UK, 565, 575, 590, 595, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 620, 625, 65, 660UK, 698, 699, 760, 8110, 8120, 8130, 850, 860, TX550, TX750, TX850.31134151 (Item #: 128688, Ref: 957E6207A) $2.40

Massey Ferguson 240 Camshaft
Camshaft
- Replaces 31415261. For the following Models with A3.152, AD3.152 or AG3.152 engines: 135, 150, 154-4, 1545, 20, 20C, 20D, 20F, 200, 203, 205, 2135, 2200, 2244, 230, 231, 235, 240, 2400, 245, 250, 2500, 253, 254-4, 30B, 30D, 30E, 30H, 35, 350, 360, 40, 40E, 4830FC, 50, 5500, 5830, 5830FC, 5860, 5870, 6030C, 7830, 7830C, 8830 (Item #: 173283, Ref: 733507M1) $127.00

Massey Ferguson 240 Camshaft Idler Gear
Camshaft Idler Gear
- 90 tooth. For tractor models (135, 148, 150, 154-4, 154-4S, 20, 200, 203, 205, 20C, 20D, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 245, 250, 2500, 253, 254-4, 30b, 30D, 30E, 30H, 35, 40, 40E, 4500, 4830FC, 50, 550 all with A3.152 or AD3.152 gas or diesel engines), 5830, 5830FC, 5860, 5870, 6030FC. Replaces 31164362. (Item #: 172340, Ref: 731205M2) $83.00

Massey Ferguson 240 Camshaft Timing Gear
Camshaft Timing Gear
- 50 tooth, for engine type PE 144 A3.152/AD3.152, replaces 410241. For tractor models 135, 148, 150, 154-4, 1545, 20, 200, 203, 205, 20C, 20F, 2135, 220, 2200, 2244, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 254-4, 30B, 30E, 30H, 35, 40, 40E, 4830FC, 50, 550, 5830, 5830FC, 5860, 5870, 6030FC, TE20. Replaces 3637541M1, 410241, 4224245M1, 731203M1, 957E6256, 81804014, 2190007, 72080139 (Item #: 172327, Ref: 731203M1) $43.60

Massey Ferguson 240 Connecting Rod
Connecting Rod
- Verify casting number 31337220. For tractor models (365, 65 all engine serial number 2939035 not ending with DL), (165, 255, 30, 300, 302, 3165, 356, 40B, 50, ALL engine serial number 29C1085), 304 engine serial number 2939036-29C1084, (20C, 235, 245, 30B ALL engine serial number ending in DS), 250 engine serial number ending in DSL, 40 Industrial with AD3.152 and AT3.152 engines, (135, 148, 20B, 20D, 20E, 20F, 230, 240, 250, 253, 254, 254S, 255, 30E, 30H, 350, 353, 355, 360, 363, 40E, 550 ALL with AD3.152 and AT3.152 engines), (155, 158, 165, 260, 560, 65, 765 ALL with AD4.203 engine). 8.875 Inch CENTER TO CENTER (IF NEEDING 9 Inch CENTER TO CENTER, ORDER NUMBER ZZ90011). Replaces: M7BJ0014, VPB6001, 31337220, 3637392M1, 3637392M91, 736386M91, 740596M91, 747008M91, 84774. (Item #: 123607, Ref: ZZ90010) $71.00

Massey Ferguson 240 Connecting Rod Bolt and Nut Assembly
Connecting Rod Bolt and Nut Assembly
- Used on Perkins Engines, this Bolt and Nut Assembly replaces OEM numbers 84264589, 370664S, 382885S2, 34447ES2B, 385279S2, 390655S2, 81803991, 957E6215, 957E6212, 957E-6215, 0095250, 1476245, 1476245X1, 375756X1, 355756X1, 33221327, 3639947M1, 33221319 (Item #: 183833, Ref: 957E6215) $3.90

Massey Ferguson 240 Crankshaft
Crankshaft
- This new crankshaft is for a Perkins engine using aLip Type Seal in AD3.152 and G3.152 engines, gas and diesel. All with casting number 31312701. Fits 135, 230, 231, 240, 245, 250, 253, 360, 20, 20C, 40, 2135, 2200. (Item #: 102113, Ref: 742827M91) $334.00

Massey Ferguson 240 Crankshaft and Bearing Kit
Crankshaft and Bearing Kit
- Crankshaft Kit comes with standard main bearings, rod bearings and thrust washers. For Perkins AG3-152 Gas and AD3-152 Diesel Engines using 1 piece lip-type rear seal, keyed nose. Replaces U5BG0027, 742827M91, 3637399M91, 3637410M91. Does not come with weights. Fits 135, 230, 231, 240, 245, 250, 253, 360. INDUSTRIALS: 20, 20C, 40, 2135, 2200. (Item #: 185737, Ref: 3641825M91) $374.00

No
Picture
Crankshaft Kit
- This Crankshaft Kit is used on Perkins A4.236 and A4.248 engines with lip rear crankshaft seal 1447049M91 (not included). It contains crankshaft, 735168M91 main bearing set, 736950M91 rod bearings, 733714M1 thrust washers, 3638115M1-thrust block (this three bolt pulley retainer replaces older single bolt style), 3638113M1 bolts. This Crankshaft does not have balancer weights in Web of Shaft. Replaces 31315981, 31315985, 3637401M91, 94433, 94435, 94436, U5BG0019, U5BG0024, U5BG0052, ZZ90081 (Item #: 3637401M91KIT) $558.83

Massey Ferguson 240 Crankshaft Pulley
Crankshaft Pulley
- For tractor models (135, 20 with Perkins Gas Engine serial number up to 152UA25587A and all diesel engines), (2135 with diesel engine), (240 with AD3.152 Diesel Engine), (35 with Perkins Diesel Engine serial number 1861319 and up), 360. Replaces 31143733. (Item #: 173096, Ref: 734627M1) $62.00

Massey Ferguson 240 Crankshaft Pulley Retaining Kit
Crankshaft Pulley Retaining Kit
- This Crankshaft Pulley Retaining kit is used on 1004.4, 1004.4T, 1004.4TI, 4.41, A4.236 and A4.248 Perkins Engines with 3 bolt crankshafts. Also used with changing from an older style single bolt retainer crank to a three bolt. Includes 3638115M1 Thrust Block, 3638113M1 Bolts. Replaces 3638113M1, 3638115M1, 3271R021, 32186139, 3242T001, 132186139, 3242T001 (Item #: 182751, Ref: 3638115M1) $56.00

No
Picture
Crankshaft, Remanufactured, 31312700
- For Massey Ferguson tractor models 230, 235, 240, 245 (all gas or diesel with 3 cylinder Perkins with lip type rear seal), Replaces Casting number 31312700, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200463) $405.01

Massey Ferguson 240 Crankshaft Weight Washer
Crankshaft Weight Washer
- This Crankshaft Weight Washer is used on 35, 50, 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E. It replaces 31731515, 31731516, 733645M1, 733644M1 (Item #: 183801, Ref: 733644M1) $0.70

Massey Ferguson 240 Cylinder Head
Cylinder Head
- This cylinder head comes with valves, springs, guides and retainers, installed. Replaces 737772M1, 742803M91, 742805M91, 748400M91, 3637486M91. For tractor models 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194-4S, 240, 265, 274, 274S, 274SK, 275, 284-4S, 284S, 285, 290, 294-4S, 294S, 3050, 3060, 30D, 362, 362N, 365, 372, 373, 375, 377, 382, 382N, 383, 387, 390, 393, 397, 440, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 675, 690. All the above with either A4.212, A4.236, or A4.248 4 cylinder diesel engines. (Item #: 168497, Ref: 3640877M91) $895.00

No
Picture
Cylinder Head, Remanufactured, 3711618/A
- For Massey Ferguson tractor models 240, 245, Replaces Massey Ferguson Casting number 3711618/A, Diesel, Engine 152, Cylinders: 3, Casting No. 3711618/A, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200514) $600.01

Massey Ferguson 240 Engine Backing Plate
Engine Backing Plate
- This Engine Backing Plate is used on Perkins AD3.152 Direct Injection Engine with Lip Type Seal. It is also known as a Flywheel Housing Adapter Plate. It Replaces: Perkins number 37147974, Massey Ferguson 741401M1. Used on 135, 150, 230, 235, 245, 231, 240, 250, 253, 360, 362, 202, 203, 204, 205, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E (Item #: 165510, Ref: 741401M1) $162.00

Massey Ferguson 240 Engine Short Block
Engine Short Block
- For Massey Ferguson tractor models 135, 148, 230, 240, 250, 340, 350, 550, Compatible with Perkins Engine (s) AD3.152 (Lip Seal), Partially assembled engine - An engine block with crankshaft, connecting rods and pistons installed, Includes camshaft, Be sure to check if your rear main crank seal, is the rope or lip (rubber) seal type, this fits lip seal engines only., Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 160299) $2129.01

Massey Ferguson 240 Flywheel
Flywheel
- This Flywheel with Ring Gear is Used for a 12 Inch Clutch. It is used on 231, 240, 250, 263, 360, 20D, 20E, 30E, 30H, 40E. Additional $25.00 shipping due to weight. Replaces 740681M91, 41115004 (Item #: 185837, Ref: 740681M91) $404.00

Massey Ferguson 240 Flywheel Tab Washer
Flywheel Tab Washer
- This Flywheel Tab Washer is used on Massey Ferguson 35, 50, 65, 135, 150, 165, 175, 180 230, 235, 245, 255, 265, 275, 231, 240, 250, 253, 360, 362, 270, 282, 283, 375, 383, 390, 390T, 398, 399, 202, 203, 204, 205, 302, 304, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E, 30, 31, 40, 3165. It Replaces 731192M1, 731192M1, 731192V1 (Item #: 153307, Ref: 731192M1) $1.40

No
Picture
Freeze Plug
- Verify OEM part number of 159312A, 7208009, 731356V1. For tractor models 300, 410, 510, 540, 550, 750, 760, 850, 860, 2500, 4500, 20, 200, 2135, 2200, 30, 302, 304, 3165, 40, 50, 70, 80, 1130, 1135, 135, 150, 154-4, 165, 230, 231, 235, 240, 245, 250, 253, 254-4, 255, 263, 2640, 2675, 285, 298, 3090, 35, 35X, 3505, 3525, 3545, 3630, 364S, 3650, 399, MH50, 65, 698, 699. (Item #: 172875, Ref: 731356M1) $1.30

Massey Ferguson 240 Main Drive Gear
Main Drive Gear
- For Massey Ferguson tractor models 135, 150, 231, 235, 240, 245, 250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, Replaces Massey Ferguson OEM number 906468M1, 50 Teeth, (Item #: 165954) $133.22

Massey Ferguson 240 Multipower Transmission Clutch Kit
Multipower Transmission Clutch Kit
- For Massey Ferguson tractor models 30, 35, 50, 65, 135 (UK), 150, 165 (UK), 178, 180, 235, 240, 245, 255, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 396, 398, 399, 670, 690, 698, 699, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20E, 30E, 40E, 50E, 50H, 60H, Replaces Massey Ferguson OEM number 1672626M1, 185425M1, 185464M1, 186519M1, 186580M1, (Item #: 168778) $232.00

Massey Ferguson 240 Oil Pan
Oil Pan
- For 230, 235, 240, 245, 250, 20, 20C, 20D, 20E, 20F, 30B, 30D, 30E, 30H, 40, 40E, 2500, 4500, all with Lip Type Crank Seal. Also replaces 37172402. (Item #: 178987, Ref: 741600M1) $405.65

No
Picture
Pushrod
- For AT6.354.4, A6.354.4, C4.236, T6.354, 6.354 Perkins Diesel Engines, (AD3.152 with engine serial number less than 2820092). (Item #: 114553, Ref: 31434307) $5.20

Massey Ferguson 240 Rear Lip Seal Housing
Rear Lip Seal Housing
- Used with AD3-152 3 cylinder diesel engine with lip type rear seal. For tractor models 135, 148, 154, 230, 235, 240, 245, 250, 254, 550 . This is for tractors with lip type rear seals ONLY (Item #: 169748, Ref: 747383M91) $24.80

Massey Ferguson 240 Shift Rail, 2nd and 4th, Used
Shift Rail, 2nd and 4th, Used
- For Massey Ferguson tractor models F40, TO35, 35, 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 431, 451, 471, 481, 543, 583, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 202, 203, 204, 205, 220, 302, 304, 2135, 2200, 2500, 3165, 4500, 6500, Replaces Massey Ferguson OEM number 180438M2, 1678866M1, For a new version of this item use Item #: 172896, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460982) $19.01

Massey Ferguson 240 Short Block, Perkins AD3-152
Short Block, Perkins AD3-152
- Put life back into your tractor with a New engine. This short block contains all new block, crankshaft, rods, bearings, five ring pistons, pins, retainers and rings. This is a replacement for engines with lip type rear main seal. It will not replace earlier rope type seal engines. Note: Balance weight is not included. You must reuse your original bolt on weight. This engine short block is used with; 3637389M91 cylinder head, 748008M91 upper gasket set, 747186M91 lower gasket set (each sold separately). Perkins build list CE22488. (Item #: VPB8019) $1945.47

Massey Ferguson 240 Tappet, Perkins Diesel
Tappet, Perkins Diesel
- Adjustable Tappet. Does not come with adjusting screw or nut. 353430X1 Nut and 32151116 Screw sold separately. Used on A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Perkins Engines. Replaces: 0860012, 731150M1, 957E6489, 81804255, 0860012, 41345 (Item #: 165601, Ref: 731150M1) $8.80

Massey Ferguson 240 Timing Cover, Front
Timing Cover, Front
- For tractor models 135, 150, 154-4, 203, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 2500, 253, 254-4, 30B, 30D, 360, 40 all with A3.152, AD3.152 or T3.152 3 cylinder Perkins diesel engines. Replaces 3637397M91, 3637397V91, A5FH0245, ZZ90039, 737211M91, 740226M1, 747454M1, 733988M91, 737211M91. Uses 734661M1 Gasket, sold separately. (Item #: 184551, Ref: 3637397M91) $181.97

Massey Ferguson 240 Timing Cover, Rear
Timing Cover, Rear
- For tractor models 135, 150, 154-4, 203, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 2500, 253, 254-4, 30B, 30D, 360, 40 all with A3.152, AD3.152 or AG3.152 3 cylinder Perkins engines. (Item #: 179030, Ref: 739477M1) $163.00

Massey Ferguson 240 Valve Guide, Exhaust
Valve Guide, Exhaust
- These Exhaust Valve Guides are used in Perkins A4.236 Diesel Engine (early block), A4.236 Diesel Engine (late block), A4.248 (liner less Flame Ring), A4.248 (liner with Flame Ring). Replaces original part numbers 31431751, 33261751, 33261752, 33261754, 33261757, 3343J001, 3343J002, 3343J021, 3638922M1, 4223074M1, 748420M1. (Item #: 166888, Ref: 748420M1) $1.90

Massey Ferguson 240 Valve Spring Seat, Lower
Valve Spring Seat, Lower
- Used on Perkins engines: AD3.153, A3.152, T3.152, AD4.203. A4.203. Replaces Massey Ferguson 736185M1, Ford E39CP9, Allis Chalmers 72080049, Perkins 33415133 (Item #: 166885) $11.10

Massey Ferguson 240 Valve Tappet
Valve Tappet
- This Valve Tappet (Lifter) is used on Perkins: 1103A-33, 1103A-33T, 1103B-33, 1103B-33T, 1103C-33, 1103C-33T, 1103C-33TA, 1103D-33, 1103D-33TA, 1104A-44, 1104A-44T, 1104A-44TA, 1104C-44, 1104C-44T, 1104C-44TA, 1104C-E44, 1104C-E44T, 1104C-E44TA, 1106C-E60TA, A4.212, A4.236, A4.248, A6.354, AT4.236, AT6.354, T4.236, T6.354. Replaces 291962A1, 1481642, 4222069V1, 31434163, 4222069M1, 4226515M1, 740671M1, 3142U031, 31434163, 30-3181677, 70257402, 257402 (Item #: 165600, Ref: 740671M1) $5.60

Massey Ferguson 240 Valve Tappet Adjusting Nut
Valve Tappet Adjusting Nut
- This Valve Tappet (Lifter) Adjusting Screw Nut is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. 3/8' inch UNF Thread. It is used with Screw 32151116 sold separately. It replaces OEM part numbers: 353430X1, 0576052, 70251225, 353438X1 (Item #: 184396, Ref: 353430X1) $2.10

Massey Ferguson 240 Valve Tappet Adjusting Screw
Valve Tappet Adjusting Screw
- This Valve Tappet (Lifter) Adjusting Screw is used on Perkins A3.144, A3.152, A4.192, A4.203, AD3.152, AD4.203 Gas and Diesel Engines. Locking nut 353430X1 sold separately. It replaces OEM part numbers: 957E6549, 731332M1, 0720677, 72080053, 32151116, 3638112M1, 32151116 (Item #: 183828, Ref: 32151116) $13.70

Engine Pistons and Sleeves
Massey Ferguson 240 Piston, Perkins 5 Ring
Piston, Perkins 5 Ring
- This is a 5 ring, 3.6 inch standard bore piston and pin for Perkins AD3.152 and AD4.203 engines. Uses 836325M91 ring set. Replaces original part numbers: AHM2188, 3639048M1, 4223940M91, 4223940V91, 731154M1, 731154V1, 734466M91, 734467M91, 743824M91, 743824V91, 780006, M03-17-05, 033 - 7635, 2130017, 31083, 31084, 4223940Z91, 71019611, 743824Z91, 82111, 82112, 82137, 82147, 9Y-4687, GL47. (Item #: 168957, Ref: 734467M91) $37.30

No
Picture
Sleeve, Perkins 152 Diesel
- For AD3.152 Perkins Diesel. Price is per sleeve. Flange is (.150 inch). With engine serial number less than 2820092. Replaces 31358345, 1434175M1, 31358345, 734175M1, 739043M1, 2130002, 28057, 31358322, 72080003. (Item #: 128601, Ref: 739043M1) $22.40

Engine Rings
Massey Ferguson 240 Piston
Piston
- For Massey Ferguson tractor models 30, 50, 65, 135, 140, 148, 150, 154, 154-4, 155, 158, 165, 203, 230, 231, 233, 234, 235, 240, 245, 250, 253, 254, 254-4, 255, 260, 302, 304, 340, 342, 350, 353, 353LX, 360, 550, Replaces Massey Ferguson OEM number 3638405M91, 4224523Z91, 4224523M91, Number of Rings: 4, Chamber: 59.82mm, Compression Height: 61.57mm, Crown: 90.75mm, Height: 109.24mm, Pin: 31.75mm, (Item #: 169819) $64.00

Exhaust System
Massey Ferguson 240 Exhaust Elbow
Exhaust Elbow
- Exhaust Elbow has mounting bolts that are 2 5/8 inches center to center, and is 90 degree. The outlet outside diameter measures 2.120 inches for a 2 1/8 inch inside diameter pipe. Replaces 1693855M1, 1865534M1. (Item #: 119854, Ref: 1693855M1) $33.00

Massey Ferguson 240 Exhaust Elbow
Exhaust Elbow
- This Exhaust Elbow is used for some horizontal (under the tractor) exhaust systems on (135 UK built, after 400000), 20D, 240, 250. Uses 3640488M1 Gasket (not included). (Item #: 158817, Ref: 1865533M1) $41.80

Massey Ferguson 240 Exhaust Elbow - 6 inches
Exhaust Elbow - 6 inches
- For Massey Ferguson tractor models 135, 148, 231, 240, 241, 250, Replaces Massey Ferguson OEM number 1865534M1, Vertical, 90 degrees, with spark arrest, (Item #: 158814) $27.00

Massey Ferguson 240 Intake Manifold
Intake Manifold
- For 3 Cylinder Perkins in models 135, 150, 20, 20C, 20D, 20F, 203, 205, 2135, 2200, 230, 235, 240, 245, 30B, 30D, 30E, 40, 50), (2500, 4500 all Forklift). Inlet Manifold. (Item #: 113704, Ref: 734864M1) $30.20

Massey Ferguson 240 Manifold
Manifold
- For (20D, 231) (135, 148, 240, 250, all with with AD3.152 Engine). Exhaust Manifold, 90 Degree Elbow. (Item #: 101625, Ref: 740221M1) $39.10

Massey Ferguson 240 Manifold Gasket
Manifold Gasket
- Used on Perkins Engines with square center holes on the exhaust ports. It replaces original part numbers 4222050M1, 4222050V1, 735016M1. Priced each. (Item #: 101626, Ref: 735016M1) $0.70

Massey Ferguson 240 Manifold To Elbow Stud and Nut
Manifold To Elbow Stud and Nut
- This Stud is 1-5/8 inches long with 3/8 UNF (Fine) Thread. It replaces 0826232, 731866M1, 731862M1, 734697M1, 10826403, 0826403, 0826439, 0826481 (Item #: 180454, Ref: 734697M1) $3.50

Massey Ferguson 240 Muffler
Muffler
- Horizontal Exhaust inlet inside diameter 2 inch, outlet outside diameter, 2 inch overall length 39 inches. For MF135 (U.K.), (150, 165, 175, 180 with Perkins Engine) 230, 240, 245, 250 with Gas or Diesel Engine. (245, 255, 265, 275 with Diesel Engine). OEM number 539523M92, 539525M91, 890476M92. (Item #: 102428, Ref: 539523M92) $47.60

Massey Ferguson 240 Muffler
Muffler
- Measures: 6-1/2 inch inlet length, 2-1/8 inch inlet outside diameter, 17-1/2 inch shell length, 26-1/2 inch outlet length, 1-5/8 inch outlet outside diameter, 50-5/8 inches overall length. For tractor models 20B, 20E, 230, 231, 240, 250, 255, 340, 342, 350, 352, 355, 372, (550 serial number 620661 and up). Replaces 1683796M1, 1661930M1, 1683796M2, 1688171M6, 1680260M2. (Item #: 120205, Ref: 1683796M3) $87.00

Massey Ferguson 240 Muffler, Horizontal
Muffler, Horizontal
- Round body, 8 inch inlet length, 1-3/4 inch inlet inside diameter, 24 inches shell length, 7 inch outlet length, 1-3/4 inch outlet outside diameter, 39 inches overall length. For tractor models 135 with Perkins Gas or Diesel Engine, (245, 255, 265, 275 all with diesel engine), (230, 240, 250 all with gas or diesel engine). (150 with Perkins Gas or Diesel Engine). (Item #: 102452, Ref: 539525M91) $53.00

Massey Ferguson 240 Muffler, Horizontal
Muffler, Horizontal
- Round body 3-1/4 inch shell diameter, A= 2-3/4 inch inlet length, B= 2 inch inlet inside diameter, C= 16-1/2 inch shell length, D= 12-1/2 inch outlet length, E= 2 inch outlet outside diameter, F= 32 inches overall length. For tractor models (30, 20, 31, 32, 40B, 50 all with gas or diesel engine), (230, 240, 250 all with Perkins Gas or Diesel Engine), (290 with Perkins Gas or Diesel Engine also must use 898534M1 OEM number tailpipe). (Item #: 102428, Ref: 508825M94) $47.60

Massey Ferguson 240 Muffler Pipe Gasket
Muffler Pipe Gasket
- Exhaust Elbow Gasket. Perkins Engines (Item #: 101628, Ref: 3640488M1) $2.10

Fuel System / Air Intake
Massey Ferguson 240 Air Cleaner Assembly, Oil Bath
Air Cleaner Assembly, Oil Bath
- For tractor models (165, 50 with AD4.203 Perkins engine), (765 with AD4.212 Perkins engine), (168, 175 with A4.236 Perkins engine), (178, 185, 188 with A4.248 Perkins engine). Can be adapted to other applications. Replaces 001210V91, 001210U91, 1886673M92, 1884278M91, 1886673M93, 1886 673M93, 1886673M94, 3824173V91, 3824173M91, 883914M94, 883914V94, 883914M1 (Item #: 184415, Ref: 1886673M94) $74.00

Massey Ferguson 240 Air Filter, Inner
Air Filter, Inner
- This Air Filter is the inner companion to 3824032M1. Has an outside diameter of 2-15/16 inches, top inside diameter 3/8 inches, bottom inside diameter 1.80 inches and is 8-1/16 inches long. It replaces 1670261M1, 1688093M1, 1688093M2, 3610942M91, 3824033M1, 3824033V1. (Item #: 184837, Ref: 3824033M1) $52.00

Massey Ferguson 240 Air Filter, Outer
Air Filter, Outer
- This Air Filter has a top outside diameter of 5-3/8 inches, bottom outside diameter of 4-9/16 inches, top inside diameter 1/2 Inch, bottom inside diameter, 3-1/6 inches. 9-1/2 inch length. This filter comes is a couple of cosmetic variations and may not look exactly like the photo. Pairs with 3824033M1 inner filter. Used on 20D Indust/Const, 240, 240N, 250, 30E (Powershuttle), 30E Indust/Const, 30H Indust/Const. Replaces 1670260M1, 1688092M2, 1805045M1, 3824032M1, M03-38-06, PA2701, AF4666, 46319, CA7207 (Item #: 182457, Ref: 3824032M1) $123.00

Massey Ferguson 240 Air Hose
Air Hose
- Hose, air cleaner to manifold. For dry type air cleaner in tractors: 135 UK, 240, 250 industrials: 20, 30E. For 20D, 30E, MF240, MF250. Measures 9 inches long, lazy S shape, 1.94 inches inside diameter. (Item #: 172810, Ref: 1861746M1) $22.50

Massey Ferguson 240 Cable - Hand Throttle, 3759020M92
Cable - Hand Throttle, 3759020M92
- For Massey Ferguson tractor models 240, 241, 243, 253, 263, Replaces Massey Ferguson OEM number 3759020M92, Length: 29-3/4", (Item #: 161958) $22.90

Massey Ferguson 240 Filter Bowl
Filter Bowl
- Sediment bowl with a center hole inside diameter of 1 inch. 2 inches in height. 3.689 inches outside diameter on the gasket mounting flange, and a bowl outside diameter of 3.3 inches. This bowl has a flat bottom with a squared edge. Used with filter part numbers 1851890M1 and 1049939M1. For tractor models: 300, 410, 510, 540, 750, 760, Super 90, 1080, 1100, 1105, 1130, 1135, 135, 150, 165, 175, 180, 240, 285, 290. (Item #: 112644, Ref: 1024386M1) $5.50

No
Picture
Foot Throttle Return Spring
- For Massey Ferguson tractor models 20, 25, 30, 135 (UK), 165 (UK), 175 (UK), 178, 240, 250, 253, 263, 265S, 271, 275 (UK), 281, 283 (UK), 283, 285S, 290 (UK), 390, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 40E, Replaces Massey Ferguson OEM number 828656M1, (Item #: 174472) $0.80

Massey Ferguson 240 Fuel Bowl, Short
Fuel Bowl, Short
- This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on Massey Ferguson 230, 231, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 290, 670, 690, 154-4, 174-4S, 184-4S, 194-4F, 20C, 20D, 254-4, 274-4, 294-4, 30B, 30D, 30E, 40B, 50C, 50D, 50E. Replaces original part numbers 1039071M1, 1890147M1, 3638268M1, 3907536M1. (Item #: 112513, Ref: 1039071M1) $5.30

Massey Ferguson 240 Fuel Cap
Fuel Cap
- This fuel cap may come bare metal or painted red. NOTE: EXTERNAL LOCK TABS. Used on Massey Ferguson 158, 20, 20B, 20D, 20E, 20F, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 60H, 6500H (FORK LIFT), 6800 (FORK LIFT), 1080, 135, 135 UK, 148, 155, 165 UK, 168, 175 UK, 178, 185, 188, 231, 240, 240P, 250, 253, 260, 261, 270, 275 UK, 283, 290, 298, 35, 35X (FE), 50, 550 UK, 560, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699. Replaces 1077576M1, 1666439M91, 1698042M91, 1876534M91, 1876534V91, 3762586M92, 3762586M93, 828583M91, ATJ3092, 001584U91, 1103177 (Item #: 153639, Ref: 1876534M1) $13.20

Massey Ferguson 240 Fuel Filter Assembly, Single
Fuel Filter Assembly, Single
- This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Includes bleeder port and screw. For tractor models (1100 serial number up to 8838067), (1130 serial number up to 88T0173), (135 serial number 9A10311 and up), (150 serial number 9A24714 and up), 165, 175, 180), (35 serial number 240398 and up), (35 Turf, 35 Utility both serial number 655000484 and up), (50 serial number 535223 and up), (65 serial number 697565 and up), (Super 90 serial number 6906208 and up), (2135 Utility and Turf serial number up to 9A10311), (300 serial number up to 29E7574), (410 serial number up to 6909990), (510 serial number 8823113 Thru 8838). (INDUSTRIAL/CONSTRUCTION: 20, 203, 205, 2200, 2500, 30, (302 serial number 119700021 and up), (304 serial number 119750021 and up), 31, 3165), 40), 50, 50A). Replaces original part numbers 1447072M91, 1876507M91, 193229M91, 193239M91, 3597838M91, 883786M91. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $33.00

Massey Ferguson 240 Fuel Filter Bolt Assembly
Fuel Filter Bolt Assembly
- Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $16.70

Massey Ferguson 240 Fuel Filter, CAV type
Fuel Filter, CAV type
- Fuel filter for tractor models 410, 510, 8450, 865, Super 92, 1045, 20D, 20E, 20F, 2200, 25, 30E, 30H, 302, 304, 40, 40E, 60, 70, 80, 885, Super 90, 1080, 1085, 1100, 1105, 1130, 1135, 135, 135 UK, 150, 154-4, 165, 165 UK, 175 UK, 178 UK, 194-4, 231, 240, 50, 251, 253, 263, 2640, 265, 2675, 2705, 271, 274-4, 275 UK, 281, 282, 283 UK, 285. Replaces 1077260M91, 836218M91, 1851890M1, 1049939M1. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $9.00

Massey Ferguson 240 Fuel Filter Head
Fuel Filter Head
- This Fuel Filter Head is used on CAV type fuel systems on Massey Ferguson. Replaces original part numbers 1891262M1, 1044869M1. Uses filter part number D8NN9176AA. Note, this filter head has two 1/2 inch UNF thread ports on the top. (Item #: 178935, Ref: 1891262M1) $16.50

Massey Ferguson 240 Fuel Filter Screw Kit
Fuel Filter Screw Kit
- Used on many tractors, this screw kit is used in CAV style diesel fuel filter assemblies. Replaces OEM numbers D2NN9N090B, 81829151, 7111-604, 7111-860. Used on Massey Ferguson 133, 135, 140, 145, 152, 155, 158, 165, 168, 174-4, 175, 178, 184-4, 185, 188, 194, 20F, 230, 231, 240, 243, 250, 253, 2620, 2625, 263, 2640, 2645, 265 S (TR), 2680, 2685, 2725, 274-4, 275, 284-4, 285 S (TR), 290, 294-4, 3080, 3090, 30H, 3610, 3630, 364, 3650, 375E Brazilian, 390E Brazilian, 4225, 4235, 4245, 4255, 4265, 4325, 4335, 4345, 4365, 530, 560, 565, 592, 595, 6235, 6245, 6255, 6265, 660 Brazilian, 840 (Item #: 179631, Ref: D2NN9N090B) $13.10

Massey Ferguson 240 Fuel Injection Pump
Fuel Injection Pump
- For Massey Ferguson tractor models 135, 150, 240, 302, 304, 342, 4500, Replaces Massey Ferguson OEM number 3830F350, Replaces CAV - Lucas manufacturer number DPA3230F350, (Item #: 162275) $808.35

Massey Ferguson 240 Fuel Injector
Fuel Injector
- This New Injector is used on MF230, MF231, MF240, MF250, MF255, MF275. Industrials: 20D, 20F, 30E, 40B. Replaces OEM 1447401E91 and 1447401R91.. It replaces original part numbers 1447401E91, 1447401M91, 1447401R91, Perkins 645680, 2645680 (Item #: 115529, Ref: 1447401M91) $60.00

Massey Ferguson 240 Fuel Injector Banjo Bolt
Fuel Injector Banjo Bolt
- This Banjo Bolt is used on Perkins Engines with CAV type Injection Systems. It replaces original part numbers 731567M1, 95315, 067 - 6312, 70251292, 71011878. Uses 2 gaskets order part #921176. (Item #: 168628, Ref: 0095315) $1.70

Massey Ferguson 240 Fuel Injector, Remanufactured, AGCO, 1076975M91, 1447401E91, 1447401M91
Fuel Injector, Remanufactured, AGCO, 1076975M91, 1447401E91, 1447401M91
- For Massey Ferguson tractor models 30, 230, 231, 240, 250, 255, 275, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 20, 40, Replaces Massey Ferguson OEM number 1447401E91, 1447401M91, 1447401R91, Replaces AGCO OEM number 1076975M91, All Injectors are complete with gaskets and dust shield, For a New version of this sku use Item #: 115529, (Item #: 210579) $75.01

Massey Ferguson 240 Fuel Injector Washer
Fuel Injector Washer
- One of these is used per Injector on Perkins Engines with CAV type fuel systems. It replaces 376 091X1, 376091X1, 396091X1, 921173, TX50039, 115 16 214, 118358ES, 159553A, 1830 105 000, 70251284, 81716268, M03-47-03 (Item #: 168623, Ref: 921173) $0.70

Massey Ferguson 240 Fuel Line
Fuel Line
- The fuel line is used from the tank valve to the lift pump. It is 17-3/4 inches long. 1/2 UNF thread fittings. Used on Massey Ferguson 20D, 20E, 20F, (30E Power Shuttle), (30E with thermal or ether start), 30H, 40E, (135 UK Engine serial number 152UA38571D and up), (240 below serial number N01001, with or without reserve fuel tank), (240 serial number N01001 - A20286, with ergonomic pedals), 240P, (250 with or without reserve fuel tank). Replaces 883712M92, 883712M94, 883712M93 (Item #: 163387, Ref: 883712M92) $8.60

Massey Ferguson 240 Fuel Line Seal Kit
Fuel Line Seal Kit
- This kit includes: 4 33811115 (3/8 O.D. 1/4 I.D. 1/4 W) sleeves, 7 33811113 (7/16 O.D. 1/4 I.D. 1/4 W) sleeves, 4 33811112 (5/16 O.D. 3/16 I.D. 3/16 W) sleeves, and 8 921176 Injector Nozzle Washers. This will service the fuel lines on many 3- and 4-cylinder Perkins equipped models. Perkins 152, 203, 212, 236, 248 Diesel Engines. There will be extra pieces when servicing a 3-cylinder engine. Replaces Perkins 33811115, 33811113, 33811112, 921176, 0921176. Replaces Massey Ferguson 376527V1, 376527X1, 376525X1, 376525V1, 376524X1, 376524V1, 376518V1, 376518X1 (Item #: 187517) $11.40

Massey Ferguson 240 Fuel Pipe, Injection Pump to Filter
Fuel Pipe, Injection Pump to Filter
- This fuel line is used on Massey Ferguson: 20D, 20E, (20F below serial number B0243), (30E below serial number A0738, with power shuttle), (30E with thermal start or ether injection), 40E, 135 UK, (240 below serial number N01001, with or without reserve fuel tank), (240 serial number A20286 with classic pedals), (240 serial numbers N01001 - A20286), 240S, (250 with or without reserve fuel tank). Replaces 888490M91 (Item #: 172947, Ref: 888490M91) $7.90

Massey Ferguson 240 Fuel Pipe, Tank to Thermostart
Fuel Pipe, Tank to Thermostart
- This Fuel line goes from 891969M91 Leak Off Reservoir to 3583543M2 Thermostart. It replaces original part numbers 88472M92, 884472M94, 884472M91, 884472M92. (Item #: 182720, Ref: 884472M92) $12.80

Massey Ferguson 240 Fuel Pipe with Tee
Fuel Pipe with Tee
- This fuel line is used on Massey Ferguson (135 UK serial number 107716 and up), (240 serial number up to 552716), (250 Early Production), (20D to tractor serial number 2996810403), 20E, 30E. Replaces 887046M92 (Item #: 179803, Ref: 887046M92) $29.30

Massey Ferguson 240 Fuel Pump
Fuel Pump
- For 148, 203, 20B, 20C, 20E, 20F, 230, 231, 240, 245, 250, 253, 254, 254-4, 255, 30B, 30D, 30E, 30H, 350, 353, 354, 355, 360, 363, 40, 40E, 550. Fuel Pump. 4 hole mount. Replaces 1447582M91, 2641712, 2641808, 4222090M91. (Item #: 117602, Ref: 3637292M1) $23.90

Massey Ferguson 240 Fuel Pump
Fuel Pump
- This fuel pump comes with gasket and is for tractor models 135, 150, 205, 40, 203, 205, 2135 all with engine serial number 152UA46497D and up and models 154-4, 230, 235, 240, 245, 20, 20C, 30B all with engine serial number up to U635849G, with Perkins AD3.152 ENGINE. This fuel pump has two mounting holes. Also replaces 2641311, 886062M9. (Item #: 117600, Ref: 3637307M91) $19.10

Massey Ferguson 240 Fuel Pump
Fuel Pump
- For tractor models 154-4S, 230, 231, 240, 241, 20C, 20D, 30B all with engine serial number U635849G and up, 245, 250, 253, 254-4, 30D, 30E, 40E. This fuel pump has four mounting holes and is for a AD3.152 Perkins Engine. Also replaces 3637282M91, 3637292M91. (Item #: 117602, Ref: 14475825M91) $23.90

Massey Ferguson 240 Fuel Pump Repair Kit
Fuel Pump Repair Kit
- This kit repairs 3637307M91 2 bolt, 14475825M91 4 bolt, 3637292M1 4 bolt fuel lift pumps. Replace 1852113M91, 1896329M91, 1896434M91, 26410009, 26410087, 3640785M1, 4222125M91, 4222125V91, 740861M1 (Item #: 165257, Ref: S40567) $18.00

Massey Ferguson 240 Fuel Sender Unit
Fuel Sender Unit
- For tractor models 240, 250, 253, 20D, 20E, 20F, 30E, 30H, 40E. This is a 6 hole mount sending unit. Replaces 3762582M1. (Item #: 119751, Ref: 1661794M92) $32.80

No
Picture
Fuel Sender Unit
- For Massey Ferguson tractor models 231, 240, Replaces Massey Ferguson OEM number 1876754M92, (Item #: 168359) $44.20

Massey Ferguson 240 Fuel Shut Off
Fuel Shut Off
- Fuel Shut Off and Strainer. For tractor models MF231, MF240 and MF250 without reserve tank. Industrials: 20D early, 30E, 40E. (Item #: 151837, Ref: 898540M91) $9.00

No
Picture
Fuel System Leak Off Pipe
- For Massey Ferguson tractor models 135, 148, 150, 203, 205, 230, 240, 340, Replaces Massey Ferguson OEM number 735010M91, (Item #: 165871) $28.76

Massey Ferguson 240 Fuel Tank
Fuel Tank
- For tractor models 240, 250, 20D, 20E, 30E, 30H, 40E. Order 001514U91 5 hole fuel gauge sending unit if needed. Replaces H167276M91, 377024X1, 376289M91, 3762589M91, 3762589V91, 3599360M95, 1672762M91, 1672762M93. (Item #: 104100, Ref: 1672762M91) $200.00

No
Picture
Fuel Tank
- For Massey Ferguson tractor models 230, 240, 250, 253, 263 (all diesel), Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 20F, 30E, 30H, 40E (all diesel), Replaces Massey Ferguson OEM number 3762589M91, 1672762M91, 3599360M95, Length: 33", Height: 12", Width: 20", Cap not included, For Fuel Cap use Item #: 161572, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104101) $180.00

Massey Ferguson 240 Fuel Tank Cap
Fuel Tank Cap
- For Massey Ferguson tractor models 20, 35, 35X, 40, 65, 135, 165, 175, 178, 231, 240, 240P, 250, 253, 261, 263, 270, 275, 283, 290, 298, 670, 690, 698, 699, Compatible with Massey Ferguson Construction and industrial models 20, 20B, 20C, 20D, 20E, 20F, 25, 30B, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 50HX, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 1698042M91, 1666439M91, 1876534M91, 828583M91, For gold color cap use Item #: 153639, (Item #: 113555) $14.20

Massey Ferguson 240 Fuel Tap
Fuel Tap
- Fuel Tank Shut Off Valve for models: 20D, 20F, 240, 250, 253, 270, 283, 283 UK, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 398, 50H, 60H. Also replaces 1694985M91 and 1694985V92 (Item #: 113632, Ref: 1694985M92) $17.60

No
Picture
Hand Throttle Return Spring
- For Massey Ferguson tractor models 240, 243, 253, 263, 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 396, 398, 399, 430, 431, 461, 543, Replaces Massey Ferguson OEM number 1695472M1, (Item #: 173645) $4.50

Massey Ferguson 240 Heater Plug
Heater Plug
- Heater Plug Thermostat Burner with Thread Connector. Also replaces 13H2468 and 2666103. For 1007, 1014, 1114, 1134, 1250, 135, 148, 165, 168, 174, 175, 178, 185, 188, 20B, 20D, 20E, 20F, 230, 240, 250, 255, 265, 274SK, 275, 285, 290, 3050, 3060, 3065, 3070, 30D, 30E, 30H, 35, 350, 353, 355, 360, 363, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E, 50, 50B, 50D, 50E, 530, 535, 550, 560, 565, 575, 590, 60H, 65, 660, 665, 675, 690, 698, 699, 800, 805, 820, 825, 830, 835, 840, 845. Replaces 2666103, 893501M91, 893501M1, 893501V91 (Item #: 129233, Ref: 893501M1) $16.00

Massey Ferguson 240 Injection Line, Nbr 1 Cylinder
Injection Line, Nbr 1 Cylinder
- Replaces, 743602M91, 738162M91, 35342004, 35354318. For tractor models 135 engine serial number: 152UA138660D >, 135 UK with AD3.152, 150 engine serial number: 152UA138660D >, 20, 20D, 20F with AD3.152, 2200 engine serial number: 152UA138660D >, 230, 235 with engine serial number: ENDING IN "D" OR "DL", 240 serial number: < N01001, 240 with AD3.152, 250 engine serial number PREFIXED with CE31089U, 250 with engine serial number PREFIXED with CE22488U, 30E, 30E POWER SHUTTLE, with engine BUILD LIST: CE31116, CE31182, CE31183, 30E with P.SHUT, 3.152 engine BUILD LIST: CE31116, CE31182, CE31183, 30H with 3.152, BUILD LIST: CE31116, CE31138, CE31182, CE31183, 30H with engine BUILD LIST: CE31116, CE31138, CE31182, CE31183, 40 engine serial number: 152UA138660D and up. (Item #: 162724, Ref: 3638623M91) $25.20

Massey Ferguson 240 Injection Line, Nbr 2 Cylinder
Injection Line, Nbr 2 Cylinder
- Replaces, 35342005, 735306M91, 35355283. For tractor models 135, 135 UK with AD3.152, 150, 20, 20D, 20F with AD3.152, 2200, 230, 235 with engine serial number: ENDING IN "D" OR "DL", 240 serial number: < N01001, 240 with AD3.152, 250 engine serial number PREFIXED with CE31089U, 250 with engine serial number PREFIXED with CE22488U, 30E, 30E POWER SHUTTLE, with engine BUILD LIST: CE31116, CE31182, CE31183, 30E with P.SHUT, 3.152 engine BUILD LIST: CE31116, CE31182, CE31183, 30H with 3.152, BUILD LIST: CE31116, CE31138, CE31182, CE31183, 30H with engine BUILD LIST: CE31116, CE31138, CE31182, CE31183, 40. (Item #: 162725, Ref: 3638624M91) $27.30

Massey Ferguson 240 Injection Line, Nbr 3 Cylinder
Injection Line, Nbr 3 Cylinder
- Replaces, 35342005, 735306M91, 35355283. For tractor models 135, 135 UK with AD3.152, 150, 20, 20D, 20F with AD3.152, 2200, 230, 235 with engine serial number: ENDING IN "D" OR "DL", 240 serial number: < N01001, 240 with AD3.152, 250 engine serial number PREFIXED with CE31089U, 250 with engine serial number PREFIXED with CE22488U, 30E, 30E POWER SHUTTLE, with engine BUILD LIST: CE31116, CE31182, CE31183, 30E with P.SHUT, 3.152 engine BUILD LIST: CE31116, CE31182, CE31183, 30H with 3.152, BUILD LIST: CE31116, CE31138, CE31182, CE31183, 30H with engine BUILD LIST: CE31116, CE31138, CE31182, CE31183, 40. (Item #: 162726, Ref: 3638625M91) $27.58

Massey Ferguson 240 Injector Leak Off Line Washer
Injector Leak Off Line Washer
- Two of these are used per injector on Perkins Engines using CAV type fuel Systems. Replaces 376518X1, 921176, 067 - 7011, 159048A, 500730, 70251294, TX10361, TX50047, 380428S, 81821105. (Item #: 168625, Ref: 921176) $0.60

Massey Ferguson 240 Injector Leak Off Pipe
Injector Leak Off Pipe
- This injector leak off pipe fits the following tractor models: 135, 148, 150, 154, 230, 235, 240, 254, and 550. Replaces 735010M91, 737180M91, 35587326, 35587359 (Item #: 162764, Ref: 35587359) $36.80

Massey Ferguson 240 Injector Pump Gasket Set
Injector Pump Gasket Set
- Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $37.80

Massey Ferguson 240 Injector Pump Repair Kit
Injector Pump Repair Kit
- Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $18.50

Massey Ferguson 240 Injector Shield
Injector Shield
- This injector shield is used on Perkins Diesel engines. Three or more used depending on the application. Replaces original part numbers 33817114, 732824M1 (Item #: 168622, Ref: 732824M1) $1.60

Massey Ferguson 240 Leak Off Reservoir
Leak Off Reservoir
- This leak off reservoir fits tractor models: 135, 148, 150, 154, 230, 235, 240, 254, and 550. (Item #: 113390, Ref: 891969M91) $14.60

Massey Ferguson 240 Manifold Heater
Manifold Heater
- Thermostart Intake Manifold Heater on Perkins Diesel Engines. For tractors: MF154-4, MF184-4, MF240, MF250, MF270, MF274-4, MF399, MF670, MF690, MF698, MF3070, MF3090. Replaces Perkins 2666108, Massey Ferguson 1446935M1, 3583453M2, 3583543M2, 3583543V2, 893501M91. (Item #: 118792, Ref: 3583543M2) $10.80

Massey Ferguson 240 Shut Off Cable
Shut Off Cable
- This Shut Off Cable is 41.5 inches long. It is used as original equipment on Massey Ferguson 1004, 230, 235, 240, 253, 263, 350, 355, 360, 4225, 4235, 4245, 4255, 4265, 698, 699. Also can be used as a universal part is a 41.5 Inch cable is needed. Replaces original part numbers 1670157M1, 3701712M91, 3597064M92, 3597064M91 (Item #: 121222, Ref: 3597064M92) $27.50

Massey Ferguson 240 Thottle Cable
Thottle Cable
- This Throttle Cable is used for foot control throttles. It is 47 inches long. It replaces original part numbers 3759026M91, 1696815M94 1696815M93, 3759026V91 (Item #: 151002, Ref: 1696815M94) $25.90

Massey Ferguson 240 Throttle Cable
Throttle Cable
- This is the Injector Pump Throttle Cable. It is 8 inches long. Used on Massey Ferguson 240 with Ergonomic Pedals, 253 and 360. It replaces original part number 1696818M94 (Item #: 161996, Ref: 1696818M94) $13.00

Massey Ferguson 240 Throttle Cable
Throttle Cable
- This Throttle Cable is used for a hand Throttle. It is 39 Inches long. It is used in Massey Ferguson (240 serial number 522354 and up with Ergonomic Pedals), and 253 Tractors. Replace original part number 3599252M92, 3759021M91 (Item #: 151000, Ref: 3599252M92) $23.30

Massey Ferguson 240 Throttle Control Slider
Throttle Control Slider
- This Throttle Control Slider is used on 240, 253, 360, 362, 375, 383, 390, 393, 398, 399, 3050, 3060, 3065, 3070, 3090, 3120, 3140, 3630, 3650, 3660, 3680, 390T. It replaces original part number 1695458M1 (Item #: 180329, Ref: 1695458M1) $2.10

No
Picture
Throttle Control Spring
- For Massey Ferguson tractor models 240, 250, 253, 263, 283 (Brazil), 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 399, 670, 690, 698, 699, 3050, 3060, 3070, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 20E, Replaces Massey Ferguson OEM number 1660773M2, (Item #: 173632) $4.80

Massey Ferguson 240 Throttle Linkage Slider Housing
Throttle Linkage Slider Housing
- This Throttle Linkage Slider Housing is used on Massey Ferguson 240 with Ergonomic Pedals as well as 253, 360, 362, 375, 383, 390, 393, 398, 399, 3050, 3060, 3065, 3070, 3090, 3120, 3140, 3630, 3650, 3660, 3680, 390T. Replaces 1696854M2 (Item #: 180330, Ref: 1696854M2) $6.00

Massey Ferguson 240 Tube Assembly, Filter to Pump
Tube Assembly, Filter to Pump
- Used on Massey Ferguson: 20D, 20E, (20F below serial number B0243), (30E below serial number A0738, with power shuttle), (30E with thermal start or ether injection), 40E, 135 UK, (240 below serial number N01001, with or without reserve fuel tank), (240 serial number A20286 with classic pedals), (240 serial numbers N01001 - A20286), 240S, (250 with or without reserve fuel tank). Replaces 888482M91 (Item #: 173344, Ref: 888482M91) $31.70

Massey Ferguson 240 Tube Assembly - Pump to Filter
Tube Assembly - Pump to Filter
- For Massey Ferguson tractor models 240 (s/n N01001-earlier, with or without reserve fuel tank), 250 (with out without reserve fuel tank), Compatible with Massey Ferguson Construction and industrial models 20D, 20E, 30E (Power Shuttle), Replaces Massey Ferguson OEM number 888488M93, 888488M91, (Item #: 163389) $23.00

Massey Ferguson 240 Tube Assembly, Tee Piece to Reservoir
Tube Assembly, Tee Piece to Reservoir
- Used on Massey Ferguson: 20E, 20F, (30E serial number below A0738, with power shuttle), (30E with Thermal Start), 135 UK, (240 serial number below N01001, with reserve fuel tank), (250 with reserve fuel tank), (35 with Perkins A3.152), (35X (FE) with Perkins A3.152). Replaces 884473M92 (Item #: 174635, Ref: 884473M92) $14.10

Gauges
Massey Ferguson 240 Fuel Gauge
Fuel Gauge
- For tractor models (20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 260, 265, 275, 285, 290, 298, 30E, 40E, 50B, 50D, 50E, 50F, 550, 565, 575, 590, 595), (2620, 2640, 2680, all with serial number <271212), 50, serial number 87500>. Fuel Gauge. 2 inch body diameter. Replaces 1877717M92, 1877717M93 (Item #: 104118, Ref: 1877717M92) $22.00

Massey Ferguson 240 Fuel Sending Unit
Fuel Sending Unit
- This is a 5 hole fuel gauge sending unit. It is used with 1672762M91 Tank. Replaces original part number 001514U91, 1661794M92 (five hole) (Item #: 161572, Ref: 001514U91) $40.80

Massey Ferguson 240 Lamp Housing
Lamp Housing
- For tractor models 231, 240, 250, 253, 270, 283, 290, 298, 20D, 20E, 30E, 40E, 50E. Replaces 1663555M92, 1663555M93 (Item #: 184514, Ref: 1663555M92) $19.80

Massey Ferguson 240 Switch, Water Temperature Sending Unit
Switch, Water Temperature Sending Unit
- Sending unit, water temperature. For tractors: MF25, MF130, MF154-4, MF154-S, MF184-4, MF194F, MF231, MF240, MF250, MF253, MF254-4, MF270, MF274-4, MF283 except Brazil, MF285 to serial number 9A34239, MF290, MF294-4, MF298, MF360, MF362, MF364S, MF375, MF383, MF390, MF393, MF394S, MF398, MF399, MF670, MF690, MF698, MF699, MF2640, MF2675, MF2705, MF2745, MF2775, MF2805, MF3050, MF3060, MF3070, MF3090, MF3505, MF3525, MF3545, MF3630, MF3650, MF3660 Industrials: 20D, 30E, 40E, 50E. Replaces 1877731M92, 1877731M93, 1877731V92, 531209M1 (Item #: 121163, Ref: 1877731M92) $6.50

Massey Ferguson 240 Tachometer
Tachometer
- For tractor models . Replaces 187718M92. Uses 26 inch drive cable part number 1699381M92. (Item #: 104130, Ref: 1674638M92) $36.00

Massey Ferguson 240 Tachometer Cable
Tachometer Cable
- 23 inches long, 7/8 inch drive end, 5/8 inch load end. Verify length. Replaces 1853233V1, 827855M1, 827855V1, 828033M92, 882539M91, 882539V91, 890232M91, 890460M91. (Item #: 104132, Ref: 41092S) $13.94

Massey Ferguson 240 Tachometer Cable
Tachometer Cable
- 27 inches long, 7/8 inch drive end, 5/8 load end. Replaces 1699381M91, 828033M92, 967572M1, 828033M1, 1850699M2, 1850700M1, 1851825M1, 882539M1, 882539M91, 890232M1, 890232M91, 890420M1, 890460M91. For tractor models 20B, 20D, 20E, 20F, 30E, 40, 135 UK, 230, 240, 250, 35, 550 UK, 590, 65, 765. (Item #: 104133, Ref: 1699381M92) $13.10

Massey Ferguson 240 Tachometer Drive Adapter
Tachometer Drive Adapter
- This Tachometer (Tractormeter) Drive Connector is used with 731208M1 Tachometer Drive Housing in Perkins 152 CID 3 Cylinder Engines and Perkins 203 4 cylinder. It Replaces Perkins 33473106. Replaces Massey: 735889M1 (Item #: 169993, Ref: 33473106) $8.80

Massey Ferguson 240 Tachometer Drive Housing
Tachometer Drive Housing
- This Tachometer is used on Perkins 152 cubic inch, three cylinder engines. Fits models 135, 150, 230, 235, 240, 245, 250, 20, 203, 205, 2135, 2200. 154-4, 20C, 2500, 254-4, 30B, 30D, MF 35, MF 40, MF 50. Uses 63676M1 seal, 731209M1 gasket and 33473106 tachometer drive adapter (each sold separately). It Replaces 37416751 and 731208M1. (Item #: 179633, Ref: 731208M1) $18.10

Massey Ferguson 240 Tachometer Drive Housing Gasket
Tachometer Drive Housing Gasket
- This Tachometer Drive Housing Gasket is used with 731208M1 Tachometer Drive Housing. It is used on Perkins 152 CID 3 cylinder engine. It replaces 731209M1, 36862511 (Item #: 178131, Ref: 731209M1) $2.50

Massey Ferguson 240 Tachometer Drive Housing Seal
Tachometer Drive Housing Seal
- This Tachometer Drive Housing Seal is used with 731208M1 Tachometer Housing on Perkins 152 CID 3 Cylinder and 203 4 cyllinder Engines. It replaces 636762M1, 72080025, 63676M1 (Item #: 169991, Ref: 636762M1) $3.40

Massey Ferguson 240 Tachometer Housing Kit
Tachometer Housing Kit
- This Kit contains one each of: 731208M1 Tachometer Drive Housing, 63676M1 Seal, 731209M1 Gasket and 33473106 Tachometer Drive Adapter. It is used on Perkins 152 CID 3 Cylinder Engines. (Item #: 183588, Ref: B2830) $30.00

Massey Ferguson 240 Tractormeter Drive with Gasket
Tractormeter Drive with Gasket
- 1/2 inch diameter. UNF thread. For tractor models 154-4, 165UK, 184-4, 194-4F, (240 with engine CE31244), 165 UK, 253, 254-4, 261, (265 up to serial number 9A349239), 270, 274-4, 282, 283, 283 UK, 290, 294-4, 298, 362, 375, 383, 390, 390T, 398, 670, 690, 698, 699, 50E, 50F, 50H, 60H. Replaces 2758346. (Item #: 121518, Ref: 1853144M1) $33.90

Massey Ferguson 240 Volt Meter, 12 Volt
Volt Meter, 12 Volt
- 2 inch diameter, illuminated face, chrome ring. For tractor models 240, 253, 20E, 20F, 30E, 40E. (Item #: 108045, Ref: 1672835M2) $24.50

Hitch / Drawbar
Massey Ferguson 240 Beam, Center Link
Beam, Center Link
- For tractor models 135, 165, 175, 180, 235, 240 serial number 522354-A20286, 245, 250, 255, 265, 298, 362, 375, 390, 398, 399. Replaces 1863393M92, 3811673M92 (Item #: 172729, Ref: 1863393M92) $113.00

No
Picture
Chain
- For Massey Ferguson tractor models 35X (FE), 65, 135, 231, 240, 240P, 250, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 40E, 203, 205, 302, 304, Replaces Massey Ferguson OEM number 184377M1, 184377V1, (Item #: 173681) $9.20

Massey Ferguson 240 Check Chain Anchor Bracket, LH
Check Chain Anchor Bracket, LH
- Used on Massey Ferguson 133, 135, 140, 150, 20, 20C, 20D, 2135, 230, 235, 240, 245, 250, 30, 3165, 340, 35, 35X, 550, this part replaces 897911M91, 897911M1 (Item #: 187217, Ref: 897911M1) $15.35

Massey Ferguson 240 Check Chain Anchor Bracket, RH
Check Chain Anchor Bracket, RH
- Used on Massey Ferguson 133, 135, 140, 150, 20, 20C, 20D, 2135, 230, 235, 240, 245, 250, 30, 3165, 340, 35, 35X, 550, this part replaces 897912M1, 059367S1, 897912Mo1, 59367S1 (Item #: 187219, Ref: 897912M1) $13.80