FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere R Tractor Parts

[Categories] [All John Deere Models] [Print]

Brakes

Brake Lining Kit - Fits R, 70, 80, 520, 530, 620, 630. Does NOT fit High-Crop Models. Includes: 4 linings with 40 rivets. 10-1/2" Outer Curvature, 2-1/4" Wide. Replaces: RE227939, AR604R (Item #: 113312, Ref: AR604R) $46.30

Brake Return Spring - Brake Pedal Return Spring for model D on SN: 188058 and up, H, R also a clutch operating rod spring on the starting engine., 60, 620, 80. On a 5010 used as clutch operating rod spring on the starting engine. 4 5/8 inch overall length. 2 used per tractor as brake pedal return spring. (Item #: 125761, Ref: H449R) $9.40

Brake Shoe Spring - Fits John Deere - 820 2 cylinder, 830 2 cylinder (GAS), 830 2 cylinder (DSL), A, G, R, 60, 70, 80, 520, 530, 620, 630, 720, 730; Replaces: R21753, R21753R, A348R (Item #: 125768, Ref: R21753) $4.50

Brake Shoes, Set of 2 - This is a Riveted Brake Shoe Assembly pair. Services one wheel. Two sets needed per tractors. Used on John Deere 70 Row-Crop and Standard, 630 Row-Crop and Standard, R, 80, 520, 530, 620. Overall outer curved length: 10-1/2 inches, Width: 2-1/4 inches. Replaces AR483R, RE227938 (Item #: 178918, Ref: AR483R) $136.00

Clutch

$John Deere R Castle Nut - 9\16 inch$
Castle Nut - 9/16" - For John Deere tractor models A (s/n 648000-later), AO (s/n 273080-later), AR (s/n 273080-later), G, R, 60, 70, 80, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number R20228, 14H862, AD2850R, D2789R, 9/16" - 18NF Grade 5, (Item #: 126123) $4.80

Clutch Adjusting Spring - This Clutch Adjusting Spring measures 1.915 inches long with a 0.120 inch wire thickness. The clutch disc adjusting spring mounts to the outer cast iron adjusting disc. Three used per tractor. Sold individually. (Item #: 118280, Ref: A352R) $3.00

Clutch Disc, Remanufactured - For John Deere tractor models R, 70, 80, 720, 820, Clutch Size: 5", Clutch Hub: 1", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 205725) $130.01

Clutch Disc with Lining - The measurements on this disc are 9.250 inches outside diameter, 0.372 inches thick, 3 5/8 inch diameter holes to slide over the R1869R pins. When assembling, the discs slide OVER the pins NOT the T-bolts. Used on John Deere R, 80, 820, 830 and 840 2 cylinder tractors. 2 or 3 are used depending on the model. Replaces John Deere part numbers AR1052R, AR403R, RE29785 (Item #: 187023, Ref: RE29785) $103.00

No
Picture
Clutch Disc with Lining - Bonded - For John Deere tractor models R, 80, 820, 830, Replaces John Deere OEM number RE29785, AR1052R, Inside Diameter: 5.480:, Outside Diameter: 9.230", (Item #: 173273) $109.00

Clutch Facing - For model R. (Item #: 126126, Ref: R90221) $30.30

Clutch Handle Bushing - Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Item #: 126143, Ref: A1197R) $9.00

Clutch Handle Pivot Bolt - The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1/4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Item #: 114893, Ref: D2031R) $21.30

Clutch Operating Bolt - 3 used per tractor, sold individually. For model R. (Item #: 126151, Ref: R254R) $38.00

Clutch Pin - Clutch linkage pin. Made in the USA, 9/16" diameter, 1/16" oversized to compensate for wear, use 9/16" drill to ream orginal hole, two used per tractor. For tractor models A, D, R, G, 60, 70, 520, 530, 620, 630, 720, 730. (Item #: 178321, Ref: D1994R) $14.90

Pressure Plate Spring Washer - For John Deere tractor models A, B, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 840, I.D. 0.572, O.D. 0.937, Thickness 0.035, Steel Spring, (Item #: 126159) $3.40

Cooling System

Fan Shaft Bearing - This Fan Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Item #: 172930, Ref: JD7654) $41.50

Radiator Cap - A (Styled sn 477000 - 523599 AND sn 542700 and up), [ AO, AR (sn 260000 - 262699 AND sn 264300 and up) ], B (sn 60000 - 148999 AND sn 167000 and up), D (sn 143800 and up), G (sn 13000 - 20202), R, 60 (Orchard / STANDARD ONLY- sn 600001 - 6042999). This radiator cap is for an unpressurized system and includes the gasket. The ID is 4-5/16" and is 1/2" tall. The OD measures 4.500". This cap has 3 tang's, The tang width is .560" and the inside center diameter measures 3.500". Replaces: AB1621R (Item #: 109740, Ref: AB1621R) $18.30

No
Picture
Radiator Core - For tractor models D after SN# 143799, R. Radiator Core 19 3/4" H x 20" W x 2 13/16" D. Gasket set is available as separately as part number R2651G. (Item #: 178994, Ref: AD1946R) $495.00

No
Picture
Radiator Core Gasket Set - This Gasket set is used with AD1946R Radiator Core. (Item #: 189979, Ref: R2651G) $14.50

$John Deere R Wire Hose Clamp - 2-1\8 inch to 2-9\32 inch$
Wire Hose Clamp - 2-1/8" to 2-9/32" - For John Deere tractor model R, Replaces John Deere OEM number H141R, 2-1/8" - 2-9/32" (53mm - 57mm), Ideal for 2-1/4" O.D. hose, (Item #: 130432) $8.90

Decals and Emblems

Be Careful Plate - This plate is used on A, AN, (AW serial number 584000 and up), B, BN, (BW serial number 201000 and up), G, GM, (GN serial number 26000 and up), GW, R, 50, 520, 60, 620, 70, 720, 80, 820 2 cylinder. (Item #: 109913, Ref: R4473) $14.40

No
Picture
Decal Set - Decal Set for John Deere Model R. (Item #: 183713, Ref: JDR) $56.00

Front Grill Name Plate - Says "John Deere". For model 40, 50, 60, 70, 80, Late R, Early 420. Replaces OEM# AA5383R. (Item #: 108740, Ref: R1964) $55.00

Front Medallion - Front medallion for the styled John Deere AO, (AR after serial number 272000), R up to serial #18912). JD yellow on metal background. Licensed John Deere Product. (Item #: 110119, Ref: AR642R) $65.00

Electrical System

Battery Strap - Battery Ground Straps. A to SN# 676000/up, B SN# 286910/up, G SN# 51143/up, R, 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 830, 5010. 2 gauge, length 7 inches terminal type Std+. For 50, 5010, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, B, G, R (Item #: 115790, Ref: TP-AB4100R) $11.80

Coil, Wico - This Magneto Coil is for Wico Model X series magnetos. Fits models A, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BO, BR, BW, BW40, BWH, D, G, GH, GM, GN, GW, H, HN, HNH, HW, HWH, W111, W113, (R with pony engine). Replaces AR12006, X5700, X5700B, X5700C. (Item #: 111196, Ref: AR12006) $102.00

Governor Bearing and Race - For John Deere tractor models H, R, 80, 820, 830, 840 (2 cylinders only), Replaces John Deere OEM number JD7150, JD7151R, JD7152R, JD7153R, (Item #: 115159) $70.00

Governor Spring - For John Deere tractor models B (s/n 201000-later), R (w/ Pony Motor), 50, 520, 530, Replaces John Deere OEM number B2636R, (Item #: 125553) $58.00

Light Switch Knob - For John Deere tractor models A, B, D, G, H, L, LA, R, Replaces John Deere OEM number F690R, (Item #: 126562) $14.70

Magneto Cap - For Wico model C Magneto, tractor models A, AO, AR, B, BO, BR, D, G, H, R. Has "WICO" heat stamped on outer face like original. (Item #: 107080, Ref: X2938) $53.00

Magneto Cap with Gasket - For WICO model X, for tractors AO, AR, A, B, BO, BR, D, G, H, R. Replaces: gasket: X5618, X5644, cap: X5643 (Item #: 105667, Ref: X5643) $53.00

Magneto Coil - For WICO model X. For tractors A, AO, AR, B, BO, BR, D, G, H, R (Item #: 111196, Ref: X5700) $102.00

Magneto Point Set - For XH894, XH477B, XH1042, XH3001, XH909 Magnetos. (Item #: 172995, Ref: FXH2100B) $20.10

Magneto Rotor - For WICO X Magnetos. Fits A, AO, AR, D, G, GH, R, All with WICO magneto (SN# XC100>) (Item #: 168696, Ref: AR31318) $21.20

Rubber Grommet - For John Deere tractor models H, M, MC, MT, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 1350, 1530, 2240, 2440, 2510, 2630, 2640, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 8430, 8630, Replaces John Deere OEM number H987R, M305T, Can be used for hole in spark plug cover, fuel tank pads and electric wire grommet, (Item #: 126661) $2.00

Starter Switch - Starter Switch button type For 50, 60, 70, A, B, G, R. (Item #: 105692, Ref: 820052) $10.80

Starter Switch - For tractor models A up to serial number 502231, AO up to serial number 272000, AR up to serial number 272000, B up to serial number 200999), H, L, LA, M, MC, MT, R, 320, 330, 40, 420, 430, 440, 50, 60. Replaces: 1882323, AT21265. (Item #: 105669, Ref: 1925781) $9.50

Voltage Regulator - For B, R, both 1947 to 1954, 25 combine, 45 combine, 55 combine, 65 combine. 6 volt positive ground. Regulator for use with generators 1100506, 507, 1101390, 397, 1947580. Saddle Mount. (Item #: 105284, Ref: VR1813) $34.50

Wico X Series Magneto Rebuild Kit - This Magneto rebuild kit is for the Wico X Series magneto. This magneto was used on model A, AH, AI, AN, ANH, AO, AR, AW, AWH, B, BI BN, BNH, BO, BR, BW, BW40, BWH, BWH40, D, G, GH, GM, GN, GW, R, W111, W113. Kit contains Cover gaskets, points, condenser, felt wipers, points and condenser screws, bearing seal, rear bronze bushing, oil slinger, impulse plate gasket, mounting gasket, dust cover unit gasket, ground connecter, inspection window, inspection window gasket. Depending on the magneto number, some of these parts may not be required. (Item #: 133558, Ref: ABC3723) $62.00

Engine Bearings

PTO Shaft Oil Seal Housing Gasket - For John Deere tractor models A (s/n 488000-later), ANH (s/n 488000-later), AO (less Powertrol), AR (less Powertrol), AW (s/n 488000-later), B (s/n 201000-later), BN (s/n 201000-later), BNH (s/n 201000-later), BW (s/n 201000-later), BWH (s/n 201000-later), G (s/n 43352-later), GH (s/n 43352-later), GM (s/n 43352-later), GN (s/n 43352-later), GW (s/n 43352-later), R, 50, 60 (s/n 6025403-earlier with engine driven PTO), 70 (s/n 7017500-later with transmission driven PTO and less Powertrol), Replaces John Deere OEM number A2396R, (Item #: 153580) $5.10

Engine Gaskets

Oil Pump Gear Cover Gasket - For John Deere tractor models A (s/n 424025-later), ANH (s/n 424025-later), AO (s/n 251486-later), AR (s/n 251486-later), AW (s/n 424025-later), B, BN, BNH, BO, BR, BW, BWH, G, GH, GM, GN, GW, H, HNH, HWH, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number B246R, 0.020" Thick, 4 Bolt Hole, (Item #: 164422) $6.00

Oil Pump to Crankcase Gasket - For John Deere tractor models A (s/n 424025-later), AO (s/n 251486-later), AR (s/n 251486-later), AW (s/n 424025-later), B, BN, BNH, BO, BR, BW, G, GH, GM, GN, GW, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number B251R, 0.031" Thick, 3 Bolt Hole Pattern, (Item #: 164421) $8.10

Engine Rebuild Kits

No
Picture
Valve Train Kit - Kit contains valves, guides, springs and locks. For model R. (Item #: 131633, Ref: VTKJDR) $614.00

Engine Parts

No
Picture
Crankshaft, Remanufactured, R340R - For John Deere tractor model R, Replaces John Deere Casting number R340R, Casting Number: R340R, (Item #: 204104) $810.01

No
Picture
Cylinder Head, Remanufactured, R49R - For John Deere tractor model R (Diesel), Replaces John Deere Casting number R49R, Engine 415, Cylinders: 2, Casting No R49R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200284) $1750.01

Ring Gear, Flywheel - This ring gear is used on Pony starting engine. For tractor models R, 80, 720, 730, 820, 830. (Item #: 114876, Ref: F2265R) $102.00

Valve, Exhaust - Used in Pony starting motor. For model R. (Item #: 131576, Ref: R-R786R) $24.00

No
Picture
Valve, Exhaust - For tractor models (70, 720, 730 all diesel), R. Replaces AF3192R, AR584R. (Item #: 185112, Ref: F3214R) $90.00

No
Picture
Valve Guide - Used in Pony starting motor. For model R. (Item #: 184560, Ref: R691R) $13.90

Valve, Intake - Used in Pony starting motor. For model R. (Item #: 131574, Ref: R-R785R) $18.20

No
Picture
Valve, Intake - For tractor models (70 diesel), R. Replaces AR585R. (Item #: 179490, Ref: R57R) $62.00

No
Picture
Valve Lock - Pair - This pair of valve locks is a set for 1 valve. For tractor models 60, 620, 630, 720, 730, 80, (820, 830 2 cylinders), (A from SN# 488000), (AO, AR from SN# 260000 and up), R, (70 gas, LP and diesel). (Item #: 185432, Ref: A2332R) $28.50

Valve Spring - For tractor models 60, A, AO, AR, R. (Item #: 184186, Ref: A356R) $27.80

Valve Spring Retainer - For tractor models (A up to SN# 487999), (AO, AR up to SN# 271999), R. (Item #: A245R) $30.75

Engine Rings

No
Picture
Piston Ring Set - Standard - 2 Cylinder - For John Deere tractor model R, Fits John Deere Engine (s) 416 (2 cylinder diesel), Bore: 5.750", Compression Rings per Piston: (5) @ .125", Oil Rings per Piston: (2) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Torsional, 3rd Groove Size: .125", 3rd Groove Style: Torsional, 4th Groove Size: .125", 4th Groove Style: Torsional, 5th Groove Size: .125", 5th Groove Style: Torsional, 6th Groove Size: .250", 6th Groove Style: Spacer / Chrome Rail / Oil Inner Spring, 7th Groove Style: .250", 7th Groove Style: Cast Iron Oil, Sold as a complete 2 cylinder set, (Item #: 130061) $483.00

Exhaust System

Chrome Curved Exhaust Stack - For tractor models R, 80, 820, 830 Chrome Curved Exhaust Stack. 4 inch OD, 24 inches Tall, Double Wall Lined. 16 Gauge. (Item #: 179523, Ref: R3547) $240.01

Chrome Straight Exhaust Pipe - For tractor models R, 80, 820, 830. 4 inch OD, 24 inches Tall, Double Wall Lined. 16 Gauge. (Item #: 124260, Ref: R3546) $230.00

Muffler, Vertical - Round body 3-3/4" shell diameter, 3 bolt mounting plate, 18-1/4" shell length, 1" outlet length, E= 2-1/2" outlet O.D., F= 20" overall length. For model (R with diesel engine from 1949 to 1954), (80 with diesel engine from 1954 to 1956), (820 with diesel engine from 1956 to 1958). (Item #: 102195, Ref: AR327R) $74.30

Fuel System / Air Intake

Air Cleaner Stack - Air Cleaner Stack For R, 80, 820 2 cylinder, 830 2 cylinder; Replaces: AR319R (Item #: 126388, Ref: AR319R) $134.00

Choke Knob - For tractor models A, B, D, G, H, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Item #: 109932, Ref: B1951R) $11.00

Fuel Filter - Fuel filter element, cartridge type, for diesel tractors with dual filters. 0.750 inches inside diameter, 3.371 inches outside diameter, 4.122 inches tall. Models: 70, 730, 4020, 600, R, 80, 720, 820, 830, 3010, 3020, 4000, 4010, 840, 4520, 5020. Replaces AR28611, AR344R, AR44077 (Item #: 110869, Ref: TP-AR44077) $16.80

Fuel Filter Canister - 2 required per tractor. For tractor models R, 70, 80, 720, 730, 820, 830. Diesels. (Item #: 182539, Ref: R473R) $39.80

No
Picture
Fuel Plunger Injection Pump - For John Deere tractor models R, 70 (s/n 7017500 - later), 80, 820, 830 (s/n 8203099 - earlier), 840 (s/n 8400000 - later), Replaces John Deere OEM number AF3614, AF3614R, AR832, AR832R, Size 10mm Bosch, " Sold in sets of two ", (Item #: 129363) $207.00

No
Picture
Injection Pump Plunger and Barrel - Scintilla - For John Deere tractor models R, 70 (s/n 7017500 - later), 80 (s/n 8203099 - earlier), 820 (s/n 8203099 - earlier), 830 (s/n 8203099 - earlier), Replaces John Deere OEM number AR734, AR734R, Size is 10MM, sold as a set of 2, (Item #: 129362) $375.00

Gauges

Oil Gauge Adapter Fitting - This Oil Gauge Adapter Fitting is 1/8 inch NPT female to 3/16 inch tubing female. It is used on some gauges without removable fitting. (Item #: 178157, Ref: 9N18685) $5.20

Temperature Gauge Black Face - For John Deere tractor models A (styled), D (styled), G (styled), M (mid 1952-later), R (mid 1952-later), 40 (1952-later), 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number AM3950T, AA6295R, AA7263R, AF2192R, AF2774R, AM2444T, AM3092T, AR20783, AT13849T, Black Bezel, Black Face, Lead Length: 48", For temperature gauge with a white face use 150249, (Item #: 150248) $30.80

Temperature Gauge - White Face - For John Deere tractor models A (styled), B (s/n 60000-306600), D (styled), G (styled), M (mid 1952-earlier), R (mid 1952-earlier), Replaces John Deere OEM number AM2444T, AA1342R, AA3534R, AA3535R, Black Bezel, White Face, Lead Length: 48", For temperature gauge with a black face use 150248, (Item #: 150249) $35.20

Water Temperature Gauge - Black face. 72 inch lead. Without John Deere Logo. 140-230. For tractor models A, AR, B, D, G, M, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840. Also replaces AA6295R, AA7263R, AM2444T, AT13849T, AR20783R. (Item #: 150251, Ref: AR490R) $32.00

Hydraulic System

Coupler Cover - For John Deere tractor models A (late), B (late), G (late), R, 50, 60, 70, Replaces John Deere OEM number A3255R, A3614R, For Swing Style Couplers, (Item #: 110634) $32.50

Lights

No
Picture
Bullet Tail Light - For B after SN# 201000 and R. 6 Volt Bullet Tail Light with glass lens. Also available in 12 Volt, order PART R4383 Instead. (Item #: 105309, Ref: R4384) $49.30

Dash Light - 6 Volt - For JD B, BR, D, AR, R, 70D, 80. (Item #: 105318, Ref: AD2835R-6V) $34.30

Headlight - This headlight, sold each, is for models A, AO, AR, B, D, G, H, R, 50, 60, 70. Teardrop Headlight, 12 volt, 5" Diameter. Also replaces AF3816R. (Item #: 105332, Ref: AF710R) $65.00

Headlight Lens - Replacement glass lens is 4.75 inch outside diameter for headlamp assemblies AA3075R, AF3817R. For tractor models A, B, D, R, 70D, 80, 820, 830. (Item #: 111330, Ref: GC200) $15.20

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: ( A, B with sheet metal dash), 70 gas and diesel, 730 gas and diesel, D up to serial number 143800, 720 gas and diesel, 50, 60, 630, AO, AR, H, R, 80, 520, 530, 620, 720, (820, 830 2 cylinder). Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.10

Headlight, Teardrop - Teardrop Headlight - 6 Volt - 5 inch Diameter For tractor models A, AO, AR, B, D, G, H, R, 50, 60, 70. Also replaces OEM# AF3817R. Restoration Quality. (Item #: 105331, Ref: AA3075R) $56.00

Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Item #: 154899, Ref: 504781M1) $5.30

Knob, Light Switch - Work or tail light knob. For tractor models A, B, D, G, R. (Item #: 126172, Ref: AA5332R) $6.40

Lens - Lens, combination front or rear light, for 5 inch diameter lights, for light TP-AA3075R on tractors: A, B, D, G, R, 7 0D, 7 20D, 730D, 80, 820, 830. Manufactured to restoration standards. For 70, 720, 730, 80, 820, 830, A, B, D, G, R Replaces A2731R (Item #: 111330, Ref: GC200) $15.20

Light Switch with Knob - Switch for tractor models A, B, D, G, R. Also replaces AA4982R. (Item #: 114720, Ref: AA4667R) $16.60

Rear Combo Light 12 V - Fits A after SN 584000, [B, R (When converted to 12 volt)], G After SN 26000. Replaces: AB4037R, AB3976R, AB3975R, AA3075R, AA4529R (Item #: 178256, Ref: AA4791R) $95.00

Red Light with Brass Ring - For tractor models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Item #: 150646, Ref: AA925R) $21.60

Ring - Moulding trim ring for headlights or rear lights, for light TP-AA3075R.* Manufactured to restoration standards. For tractor models 70, 720, 730, 80, 820, 830, A, B, D, G, R. (Item #: 124994, Ref: TP-AA3241R) $13.60

Tail Light - For B after SN# 201000, R. 6 volt, 5 inch diameter Tail Light. Used in combination with the Bullet Tail Light. (3866R) Replaces: AB3549R (Item #: 125718, Ref: AB3549R) $78.51

Tail Light, Bullet Shape - For B from SN# 201000 and R. Bullet Tail Light, 6 Volt, with glass lens. (R4384) Replaces: AM1310T, AB3976R, AM1291T (Item #: 105309, Ref: AB3976R) $49.30

Tail Light, Combo Light - For tractor models B after SN# 201000, R. 6V Rear Combo Light, 5". Replaces: AB4037R, AB3976R, AB3975R, AA3075R, AA4529R (Item #: 113257, Ref: AB4037R) $81.00

$John Deere R Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. Replaces: AD1855R, AD2082R, AD2834R, AD2835R, AR1563R, AR20447R, AR26757R, AR33479R, AR35993R, B1728R, RE13195R (Item #: 150699, Ref: TLBULB12V) $1.70

Tail Light, White - For B after SN# 201000, R. 6 volt, 5 inch diameter. Tail Light used in combination with the Bullet Tail Light. (Item #: 113257, Ref: AB3975R) $81.00

Miscellaneous

Umbrella Bracket Assembly - For tractor models with Battery Box Mounted Seats: 50, A, 60, B, G, 520, 530, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, R. (Item #: 179139, Ref: AA4206R) $87.00

Oil System

Engine Oil Pump Strainer Screen - Used on diesel John Deere models 70, 730, R, 720 this screen replaces John Deere part numbers AR445R (Item #: 164418, Ref: AR445R) $49.50

Oil Filter - Oil filter element, cartridge type 6-7/16" Tall, 3-1/8" Wide. Does not come with seal or gasket. For tractors: A, B, D Serial number 146500 and up, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030. Replaces AA3680R, AR21777R, AR26350, AR28110R (Item #: 109417, Ref: AR26350) $10.60

Oil Level Indicator - This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3/8 inch NPT male fitting. Dipstick is 4.91 inches long. For model early model A series, B, (late model D, DI, W111, W113), G series, H series, R, 50, 60, 70. Originally used as an aftermarket product in the 1940's. (Item #: 1998TA-New) $46.50

Paint

No
Picture
Paint, Classic Green, 1 Gallon - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102408, Ref: TP215GAL) $56.00

No
Picture
Paint, Classic Green, 1 Quart - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102407, Ref: TP215QT) $24.00

No
Picture
Paint, Classic Green, Spray Can - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP215SP) $10.50

PTO / Driveline

Inner PTO Clutch Drum Seal - This inner PTO clutch drum seal has a 1.125 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.250 inch wide. It Fits: R. Replaces: AL2122T, AL2653T, AR608R (Item #: 106846, Ref: AL2122T) $7.60

PTO Oil Seal - Fits John Deere - [A, AH, AN, ANH, AW, AWH (Used as a rear PTO oil seal (serial number 488000-UP)], [AO, AR (Used as a rear PTO oil seal serial number 260000 and up)], [B, BN, BNH, BW, BW40, BWH, BWH40 (Used as a rear PTO oil seal serial number 149700 and up)], [BO, BR (Used as a rear PTO oil seal serial number 333100 and up)], [G, GH, GM, GN, GW (Used as a rear PTO oil seal serial number 43352 and up)], [R, 50, 520, 530, 60, 620, 630, 70, 70D, 720, 720D, 730, 730D (used as a rear PTO oil seal)], 2010 (used as a transmission drive shaft seal), [3010, 4010 (Used as a front PTO oil seal)]; Replaces: AA2296R, AT11888, AT11931, AT16076. (Item #: 152182, Ref: 71701C1) $10.50

Seats

Arm Rests - Pair - Black Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 178435, Ref: R1190) $112.00

Arm Rests, Pair - Yellow Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 110196, Ref: R1188) $114.00

Seat Back - Yellow, wood back. 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. Picture shows seat bottom. Not included in price. Order P/N R0172 if needed. (Item #: 110194, Ref: R0173) $71.00

No
Picture
Seat Back - Yellow, wood, 9 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 179186, Ref: R0993) $58.15

Seat Back - Black, wood, 6 inches high. For tractor models A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. 16.5 inch bolt spacing. (Item #: 116170, Ref: 363219R91-1) $36.60

Seat Bottom - Yellow, wood back. 191/2" x 14 1/2". For D, G, R, 50, 60, 70 80, 520, 530, 620, 630, 720, 730, 820, 830. For seat back order part R0173. NOTE: If tractor has Float Ride, order p/n 0994RTP bottom instead. Picture shows seat back. Not included in price. Order P/N R0173 if needed. (Item #: 101300, Ref: R0172) $61.00

Seat Bottom - Black, wood, 19 1/2 inches x 14 1/2 inches. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 116729, Ref: R0863) $72.00

Sheet Metal / Body Parts

Battery Base - Use with R1521 and R1522 For B (From S# 201000), R, 80, 820, 830 with Pony Motor. Replaces OEM# AR1326R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126477, Ref: R3285) $69.00

Battery Box - This battery box is for a model B with Serial Number 201000 and up, or model R With Pony Start. Replaces OEM# AB3593R, AB4101R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104076, Ref: R1521) $243.00

Grill Screen - For one piece wrap-around style For R, 80, 820, 830. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112563, Ref: R293R) $130.00

Steering

Steering Wheel - For A, B, D, G, R, 50, 60, 70, 80, 520, 620, 630, 720, 730, (820 Diesel (2 CYL) With Power Steering). Steering Wheel 17 5/8" Diameter, 13/16" Keyed Hub. 2447R (Item #: 101444, Ref: AA380R) $46.20

Steering Wheel - For R, 70, 720, 80, 820 Without Power Steering. Steering Wheel, 20" Diameter, 4 Spokes, 11/16" Keyed Hub. (Item #: 101445, Ref: AR505R) $49.80

Steering Wheel Shaft Bushing - For John Deere tractor models B (s/n 201000-later), BN (s/n 201000-later), BNH (s/n 201000-later), BW (s/n 201000-later), BWH (s/n 201000-later), R, 50, 80, 520, 620, 820, 830, Replaces John Deere OEM number B37R, 1.739" Length, 0.940" Outer Diameter, 0.887" Inner Diameter, (Item #: 126725) $20.60

Wheels

Clamp Lock Nut - 1-14 thread, fits front wheel on A, D, G, R, 50, 60, 70, 3010 and 4010. For 3010, 4010, 50, 60, 70, A, D, G, R (Item #: 111995, Ref: LN10-6) $21.30

Front Wheel Hub Cap, Used - For John Deere tractor models A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 940, 950, 970, 990, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1550, 1630, 1640, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2950, 2955, 3010, 3020, 3030, 3040, 3120, 3130 (after s/n 186270), 3140, 4000 (after s/n 201000), 4010, 4020 (after s/n 201000), 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010, 5020, 6030, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6410L, 6410S, 6420, 6500, 6510, 6520, Replaces John Deere OEM number A1555R, 3 bolt cap, Aluminum Cap, For a new version of this item use Item #: 102235, (Item #: 402235) $5.01

Front Wheel Hub Cap, Used - For John Deere tractor models A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number A1555R, 3 bolt cap, Cast Cap, For a new version of this item use Item #: 102235, (Item #: 496607) $5.01

Rim Clamp, Used - For John Deere tractor models A (s/n 477000-later), AO (s/n 014800-later), AR (s/n 014800-later), B, BN, BNH, BW, BWH, G, GH, GN, GW, R, 60, 70 (s/n 014800-later), 80, 600, 620, 630, 720, 730, 820, 830, 2010, 3010, 3020, 3030, 3120, 3130, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 55 (s/n 12051-39349), 105, 6602, 6622, Replaces John Deere OEM nos B634R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497223) $6.01

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A, For the following tractors: A, B, G, M, 50, 60, 70, 630, 730, MI, MT, 320, H, R, 40, 80, 330, 420, 430, 520, 530, 620, 720, 820, 830, 1010, 1020, 1520, 2010, 2020, 2030, 3010, BW, BWH (Item #: 111560, Ref: 512581M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 2" x 2 1/2", black and yellow, vinyl cut (Item #: 183237, Ref: R4695) $9.00

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.70

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.80

2 Legged Deer Decal - John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Item #: 183225, Ref: R5188) $32.80

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Item #: 183579, Ref: R5189) $14.80

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $40.40

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $40.40

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $23.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $53.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

$John Deere R Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$John Deere R Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$John Deere R Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere R Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$John Deere R Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$John Deere R Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$John Deere R Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$John Deere R Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $389.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $124.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $78.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $30.90

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.50

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.00

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $59.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $24.00

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $8.10

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $48.80

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $8.80

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00