FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere B Tractor Parts

[Categories] [All John Deere Models] [Print]

Brakes

Brake Gasket - For John Deere tractor models B (s/n 232468-later), 50, 520, 530, Replaces John Deere OEM number B2743R, (Item #: 154791) $7.00

No
Picture
Brake Lining Kit - Brake shoe lining kit. Set of 4 with rivets. For B (after 202000)~ 50 Series. For 50, B (Item #: 105604, Ref: TP-AB3849R) $30.00

Brake Return Spring - For tractor models 50, B, BO, BR. (Item #: 125769, Ref: B228R) $8.98

Brake Shoe Lining Kit, Early - For B SN# 200999 and below. Includes 4 linings with rivets. Each lining is 1-1/2" wide x 7" long with 6 rivet holes. Replaces AB3848R. (Item #: 115394, Ref: R4486) $29.20

Brake Shoe Lining Kit, Late - For B after 201000 with 9-3/4 inch linings, and 50 series. Set of 4 linings and rivets, each lining uses 8 rivets, measures 9.75 inches by 1.5 inches. Used to reline brake shoes. Replaces AB3848R, B223R, B2723R. (Item #: 105604, Ref: TPAB3849R) $30.00

Brake Shoes, Set of 2 - These Brake Shoes are used on John Deere B serial number 201000 and up, and 50. Overall outer curved length: 9-3/4 inches, Width: 1-1/2 inches, 8 rivets retain lining to shoe. Replaces RE204403, AB3833R (Item #: 178908, Ref: AB3833R) $129.00

Clutch

Clutch Cover - For B (SN# 201000 and UP), 50, 520, and 530. Clutch Cover also replaces B3764R. Not painted. (Item #: 105725, Ref: B2361R) $38.00

Clutch Disc, Remanufactured - For John Deere tractor models B, BN, BNH, BW, BWH, Clutch Size: 7", Clutch Type: Woven, (Item #: 205717) $83.50

Clutch Disc, Riveted - Fits B (SN# 201000 and above), 50, 520, 530. Replaces: AB3471R, AB4828R, RE29878 (Item #: 108434, Ref: AB3471R) $67.00

Clutch Dog - For John Deere tractor models B (s/n200999-earlier), H, HNH, HWH, Replaces John Deere OEM number B145R, Forged like original, 3 used per tractor, Sold individually, (Item #: 126128) $49.94

Clutch Dog - For John Deere tractor models B (s/n 2000000-later), 50, 520, 530, Replaces John Deere OEM number B2351R, (Item #: 126129) $51.00

Clutch Drive Disc - For model (B SN# 201000 and up). (Item #: 110921, Ref: B2463R) $182.00

Clutch Drive Disc - For model B SN# 96000 to 200999. Replaces AB3806R. (Item #: 109781, Ref: AB2758R) $176.00

Clutch Drive Disc - This new Clutch Drive Disc fits John Deere - B up to serial number 59999. Replaces: AB260R, AB3807R (Item #: 180223, Ref: AB3807R) $235.00

Clutch Drive Disc, Sliding - For model (B SN# 201000 and up). (Item #: 126167, Ref: B2358R) $60.00

Clutch Facing - Pulley clutch facing. Floating: B to 200999, BR, BO. 7-7/8 outside diameter, 4-7/8 inside diameter, 1.5 wide, .15 thick. For B, BO, BR (Item #: 105722, Ref: B158R) $17.00

Clutch Handle Pivot Bolt - If your clutch handle is sloppy because the pivot bolt has seen better days, then simply replace it with this new clutch handle pivot bolt. This brand new bolt replaces part numbers B180R and R121198. Measures 0.650 inches outside diameter, to 0.530 inches outside diameter. 3-7/16 inches in length with 9/16 - 12 thread size. Uses B177R bushing, not included. (Item #: 126141, Ref: B180R) $22.50

Clutch Lever Pivot Bushing - Used with B180R Clutch Handle Pivot Bolt this bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. (Item #: 126142, Ref: B177R) $9.00

Clutch Operating Bolt - 3 used per tractor, sold individually. For model B up to SN# 59999. (Item #: 126144, Ref: B147R) $37.00

Clutch Operating Bolt - 3 used per tractor, sold individually. For model B SN# 60000 to 95999. (Item #: 126145, Ref: B1361R) $36.00

Clutch Operating Bolt - 3 used per tractor, sold individually. For model B SN# 96000 to 200999. (Item #: 126146, Ref: B1856R) $36.00

Clutch Operating Bolt - 3 used per tractor, sold individually. For model B SN# 201000 and up. (Item #: 126147, Ref: B2353R) $37.00

Clutch Pin - Clutch linkage pin. Made in the USA, 1/2" diameter, 1/16" oversized to compensate for wear, use 1/2" drill to ream orginal hole, two used per tractor. For tractor models B, H, 50. (Item #: 178319, Ref: B178R) $7.80

Clutch Pulley Brake Pad - For tractor models A, B, 50, 520, 530, 60, 630, 70, 720, 730. Sold individually. Replaces: AB4748R, AF4748R, RE29790 (Item #: 108125, Ref: RE29790) $12.00

No
Picture
Clutch Pulley Cover - This clutch pulley cover fits the following tractor models: B up to serial number 200999, BO, and BR from serial number 325000 and up. It measures 10 inches in diameter. (Item #: 105724, Ref: B164R) $40.00

Pressure Plate Spring Washer - For John Deere tractor models A, B, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 840, I.D. 0.572, O.D. 0.937, Thickness 0.035, Steel Spring, (Item #: 126159) $3.00

Pulley Clutch Cover, Used - For John Deere tractor model B (s/n 200999-earlier), Replaces John Deere OEM number B164R, Diameter: 9", For a new version of this item use Item #: 105724, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405724) $23.76

Pulley Clutch Facing - For John Deere tractor models B (s/n 201000-later), 50, 520, 530, Replaces John Deere OEM number B2354R, Floating Facings, Order 2, (Item #: 105723) $15.90

Pulley Clutch Facing without Rivets - 6.980" O.D., 4.14" I.D., .156" thick. For tractor models 50, 520, 530, (B SN# 201000 and up). Replaces B2357R, B2354R. (Item #: 172336, Ref: R90219) $57.00

Cooling System

Fan Drive Disc - For tractor models A, (B SN# 171992 and up), (G SN# 13910 and up), (H SN# 50500 and up), 50, 520, 530, 60, 630, 70, 720, 730. Also replaces B2123R. Measures 3.627 inches O.D., .747 inch Spline diameter, 10 splines, .989 inches thick. 2 Used per tractor, price is each. (Item #: 112427, Ref: AB3314R) $40.00

Fan Friction Washer - For John Deere tractor models ANH, AO (s/n 264644-later), AO, AR (s/n 264644-later), AW, B, BN, BNH, BO (s/n 334150-later), BR (s/n 334150-later), BWH, D (s/n 30400-later), G (s/n 13910-later), GH (s/n 13910-later), GM (s/n 13910-later), GN (s/n 13910-later), GW (s/n 13910-later), H (a/n 50499-earlier when converted to friction style fan drive), HNH (a/n 50499-earlier when converted to friction style fan drive), HWH (a/n 50499-earlier when converted to friction style fan drive), 50, 60, 70, 520, 530, 620, 630, 720, 730 (gas / diesel / LP), Replaces John Deere OEM number D399R, R105808, 3-1/2" O.D., 1-1/8" I.D., 1.100" thick, (Item #: 115008) $6.10

Fan Shaft Bearing - This Fan Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Item #: 172930, Ref: JD7654) $39.00

Gasket - Water Pump to Tank - For John Deere tractor models B (s/n B306600-later), 50, 520, 530, Replaces John Deere OEM number B2887R, (Item #: 160355) $5.70

No
Picture
Lower Water Pipe - For B up to SN# 42199. 19 inches long. (Item #: 179089, Ref: B401R) $55.00

No
Picture
Lower Water Pipe - For B from SN# 42200 to 59999. 24 inches long. (Item #: 179641, Ref: B1008R) $64.00

Pulley, Water Pump - 1/2" wide, used on pumps AB262R, AA5570R. For tractor models (50 SN# up to 5016058), (60 SN# up to 6029999), (A SN# 700200 and up), (AO, AR SN# 281400 and up), (B SN# B306600 and up). (Item #: 172278, Ref: A4283R) $39.00

Radiator Cap - A (Styled sn 477000 - 523599 AND sn 542700 and up), [ AO, AR (sn 260000 - 262699 AND sn 264300 and up) ], B (sn 60000 - 148999 AND sn 167000 and up), D (sn 143800 and up), G (sn 13000 - 20202), R, 60 (Orchard / STANDARD ONLY- sn 600001 - 6042999). This radiator cap is for an unpressurized system and includes the gasket. The ID is 4-5/16" and is 1/2" tall. The OD measures 4.500". This cap has 3 tang's, The tang width is .560" and the inside center diameter measures 3.500". Replaces: AB1621R (Item #: 109740, Ref: AB1621R) $17.00

Radiator Cap - With Gasket for unstyled models: A, AO, AR, B, BO, BR, D, (G SN# : 4251-12999), GP. Also replaces AA795R. (Item #: 182928, Ref: AD86R) $114.28

Radiator Core - For Unstyled B up to SN# 59999. Radiator Core 16 1/2" H x 14 1/2" W x 2 1/8" D. R2649G Gasket Set can be ordered separately. SKU 113556 (Item #: 113557, Ref: AB354R) $300.00

Radiator Core - Radiator Core - B, 50, 520, 530. Gasket set available as 118495. (Item #: 101894, Ref: AB4666R) $295.00

Radiator Core Bolt Kit - For model B sn 60000 to 305999 without a waterpump, can also be used on SN# 306600 and up, but will have some extra pieces. (Item #: 115509, Ref: JDS964) $47.58

Radiator Core Gasket - This Gasket set is used on John Deere B Unstyled To serial number 59999. Includes two gaskets. Used with AB354R radiator core. Replaces original part number B397R. (Item #: 113556, Ref: B397R) $15.80

Radiator Core Gasket - For John Deere tractor models B (1939-53), 50, 520, 530, Replaces John Deere OEM number B1507R, 5-5/8" x 16", Bolt Holes: 18, Material: Cork, Sold as a pair, Radiator Core Gasket - Paper use Item #: 112088, (Item #: 118495) $18.70

Radiator Core Gaskets - For John Deere tractor models B (1939-53), 50, 520, 530, Replaces John Deere OEM number B1507R, 5-1/2" x 16", 18 Bolt Holes, Material: Paper, Sold as set of 2, Radiator Core Gasket - Cork use Item #: 118495, (Item #: 112088) $14.80

Radiator Curtain - For model B from SN# 1000-34951, Radiator Curtain. (Item #: 179104, Ref: AB221R) $61.00

Radiator Filler Flange - For model B from SN# 201000 and up. Uses radiator cap part number AB1621R. (Item #: 118632, Ref: B2604R) $5.98

Radiator Filler Neck - For A, AO, AR, B, G Styled. Fits: (A Styled serial number 477000 - 523599 AND serial number 542700 and up), (B serial number 60000 - 148499 AND serial number 167000 - 200999), (G serial number 13000 - 20202). Replaces: AB1607R Radiator Filler Neck. Uses cap AB1621R. This is for narrow neck, 4-1/4 inch outside diameter and 2-5/16 inch where is slides into the tank. (Item #: 110046, Ref: AB1607R) $26.40

$John Deere B Radiator Hose - Bulk 3 x 1-7\8 inch$
Radiator Hose - Bulk 3 x 1-7/8" - For John Deere tractor models B, BN (s/n B60000-later), BNH (s/n B60000-later), BO, BR, BW (s/n B60000-later), BWH (s/n B60000-later), 520, 530, Compatible with John Deere Combine (s) 105, Replaces John Deere OEM number H23740, B77R, Replaces Case IH OEM number 407007R1, I.D. (A): 1-7/8", O.D.: 2-1/4", Length: 3', For Hose Clamp use Item #: 130455, (Item #: 152028) $28.10

$John Deere B Radiator Hose - Bulk 3 x 2-5\8 inch$
Radiator Hose - Bulk 3 x 2-5/8" - For John Deere tractor models A (s/n 477000-later), AO (Styled s/n 272000-later), AR (Styled s/n 272000-later), B, 60, 620, 630, Replaces John Deere OEM number A3317R, A4636R, B1808R, R32656, I.D. (A): 2-5/8", O.D.: 3", Length: 3', For Hose Clamp use Item #: 130470, (Item #: 150822) $45.00

No
Picture
Radiator Strap - For tractor models: 50, 520, 530, B, BO, BR. (Item #: 182810, Ref: B398R) $15.00

Upper Water Pipe, Radiator - For model B from SN# 1000 to 95999. (Item #: 179103, Ref: B400R) $53.00

Upper Water Pipe, Radiator - For model B SN# 201000 and up 1947-1953. Must weld to existing casting. Replaces AB3601R. (Item #: 179109, Ref: B2607R) $82.51

Water Pump - For B with SN# above B306600, 50 with SN# below 5016057, both with pulley width of 1/2". Water pump comes with pulley. (Item #: 111168, Ref: AB4262R) $143.00

Water Pump Plug - Plug for AA6327R or AF2368R to plug off by pass tube when not needed. (Item #: 179547, Ref: F2282R) $16.90

$John Deere B Wire Hose Clamp - 2-13\32 inch to 2-17\32 inch$
Wire Hose Clamp - 2-13/32" to 2-17/32" - For John Deere tractor models B, BN, BNH, BO, BR, BW, BWH, 50, 520, 530, Replaces John Deere OEM number B78R, 2-13/32" - 2-17/32" (60mm -64mm), Ideal for 2-1/2" O.D. hose, (Item #: 130433) $8.70

$John Deere B Wire Hose Clamp - 3 inch to 3-9\32 inch$
Wire Hose Clamp - 3" to 3-9/32" - For John Deere tractor models A, B, BN, BNH, BW, BWH, 60, 620, 630, Replaces John Deere OEM number A448R, B1813R, 3" - 3-9/32" (76mm - 84mm), Ideal for 3-1/4" O.D. hose, (Item #: 130434) $9.10

Decals and Emblems

Be Careful Plate - This plate is used on A, AN, (AW serial number 584000 and up), B, BN, (BW serial number 201000 and up), G, GM, (GN serial number 26000 and up), GW, R, 50, 520, 60, 620, 70, 720, 80, 820 2 cylinder. (Item #: 109913, Ref: R4473) $11.91

Decal Set - For model B (1923-1938). This is a set of 12 self adhesive decals. Licensed by John Deere. These are printed on Mylar, not die cut. (Item #: 183159, Ref: R1901) $132.00

Serial Number Tag - Comes with rivets. For Model: B. (Item #: 178458, Ref: JDS723) $36.00

Drive Train

Countershaft Idler Gear - For B (From S#201000), 50. Replace OEM Part Number B2417R. (Item #: 111048, Ref: R0717) $88.00

Flywheel Cover Inspection Plate - For tractor models A, B, 50, 60, 70, 520, 530, 620, 630, 720, 730. (Item #: 125037, Ref: AB3579R) $37.15

Gear Shift Knob - Plastic knob, 3/8 inch fine thread. For tractor models (A styled from serial number 648000), AR, AO, (B styled from serial number 201000), (G styled from serial number 13000), 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, (820, 830 2-cylinder). (Item #: 109545, Ref: 03501AB) $4.00

Inner Rear Axle Seal - This inner rear axle seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 50, B, BN, BNH, BW, BWH, BWH40 (Sn: 60000 and up) ], BO, BR (Sn: 329000 and up). Replaces: AB1325R, AB1326R, GG-335-20740, RE32442, RE57484, CR23710, 412119 (Item #: 106642, Ref: 834831M1) $12.40

Electrical System

Ammeter, Black - Black ammeter for John Deere. Fits A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720 gas or diesel, 730 gas or diesel, 820, 830. Replaces AF2749R, AM1864T (Item #: 150259, Ref: 2348944) $26.60

Battery Cable - Battery Cables: A to SN# 584000, B to SN# 200999, 0 gauge, length 28", terminal type 1-3. (Item #: 184450, Ref: TP-AA4422R) $33.00

Battery Cable - For tractor models A to SN# 584000/up, B SN# 201000/up SN# 26001/up, 50, 60, 70D, 520, 620, 720D and 730D with cranking eng. Length 64". Gauge: 2 (Item #: 173781, Ref: TP-AB3546) $39.00

Battery Strap - Battery Ground Straps. A to SN# 676599, B to SN# 286909, G to SN# 51142, 2010. 1 guage, length 13, terminal type Std+. For A, B, G (Item #: 184831, Ref: TP-AB1833R) $21.50

Battery Strap - Battery Ground Straps. A to SN# 676000/up, B SN# 286910/up, G SN# 51143/up, R, 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 830, 5010. 2 gauge, length 7 inches terminal type Std+. For 50, 5010, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, B, G, R (Item #: 115790, Ref: TP-AB4100R) $12.50

Coil, 6V - Distributor Coil, 6 volt. Delco Remy equipped. For tractor models B, M, 40, 50 (after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M. Replaces AM373T. (Item #: 105281, Ref: D4PE12029AA) $13.10

Coil Bracket - This distributor coil bracket is used for tractor models: A, B, G, 50, 60, 70, 520, and 530. (Item #: 110868, Ref: AA4883R) $24.30

Coil, Wico - This Magneto Coil is for Wico Model X series magnetos. Fits models A, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BO, BR, BW, BW40, BWH, D, G, GH, GM, GN, GW, H, HN, HNH, HW, HWH, W111, W113, (R with pony engine). Replaces AR12006, X5700, X5700B, X5700C. (Item #: 111196, Ref: AR12006) $99.00

Condenser - For tractor models (A, AO, AR, B, BN, BNH, BW, BWH all styled with distributor SN# XD100 and up) (Item #: 172664, Ref: K6977) $7.20

Distributor - Built exactly like the original, this new distributor replaces Delco 1111558. Complete and ready to install. If replacing a Magneto you need 2 A4157R distributor hold down clamps. (Item #: 178488, Ref: 1111558NEW) $321.00

Distributor Bushing and Shim Kit - Delco Distributor Bushing and Shim Kit.Fits John Deere A, AH, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BW, BWH, BWH40, D, G, GH, GM, GN, GW, 50, 60, 70 all with Delco distributor number 1111558. Replaces: lock washer: 12H40C, nut: 14H774R, bushing: 1917207, woodruff key: 26H3R, shim washers (2): 811912. This bushing and shim kit has an 0.486" I.D., 0.656" O.D. and 1.989" length. Bushing must be sized to shaft after installation. (Item #: 178320, Ref: JDS3012) $26.70

Distributor Cap - This Distributor cap for a 2 Cylinder with a Delco Distributor, Vertical, 12 Volt. Plug connectors on cap are at 90 degrees or 12:00 o-clock and 3:00 o-clock. For Delco distributors up to 1963 on models: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010, 114W, 116W, 323W. Balers~ 25, 30, 40, For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M. (Item #: 111725, Ref: 1935038) $14.30

Distributor Cap, Horizontal - For Delco distributor on: A, B, G, 50, 60, 70. (Item #: 105568, Ref: 1913739) $26.98

Distributor Cap, Vertical, 6 Volt - Distributor cap for Delco distributor, 2 cylinder, vertical, Please note the orientation of the 2 non-plugged terminals on top of the distributor cap (click "enlarge image"), there are two different orientations available (see Part No: 1935038 for the other orientation). Fits A, B, G, M, 320, 330, 40, 420, 440, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 103152, Ref: 1909008) $10.20

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models A, AR, AH, AN, ANH, AO, B, BR, BN, BNH, BW, BWH, G, GN, GW, M, MC, MI, MT, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010. (Item #: 103153, Ref: 1900119) $8.80

Distributor Point Set - This Point Set is for a WICO DB Distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A (659290-662873)~ For 1010, 1020, 105, 12, 2010, 2020, 215, 215A, 217, 2510, 299, 323W, 40, 45, 50, 55, 600, 65, 700, 95, 99, A, AO, AR, B. (Item #: 113431, Ref: AR12003) $27.08

Distributor Point Set - This Point Set is for a WICO XB distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A (659290-662873. (Item #: 172995, Ref: AR12014) $20.70

No
Picture
Distributor, Rebuilt - Complete remanufactured distributor for John Deere A, B, G, 50, 60, 70 tractors with Delco distributor 1111558. This is the distributor which was used in Delco-Remy Magneto to Battery Ignition Unit number 1917333. A refundable $125.00 core charge will be added to your order. (Item #: 203572, Ref: 1111558) $265.01

Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Used on some of the following using Delco distibutors: A, AH, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BW, BWH, BWH40, D, G, GH, GM, GN, GW, 1010, 2010, 3010, 4010, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730. Replaces: 12H290R, 817363, 1909206, 1914142, 1916805, 1916806 (Item #: 111468, Ref: 1904376) $13.10

Generator Cutout Assembly - For A and B to 1947. Replaces 1116809DR. (Item #: 105283, Ref: 1500199M91) $20.60

Generator - Delco Style (10159), Remanufactured, Delco Remy, 1100506 - For John Deere tractor models A, AO, AR, B, G, GH, GN, GW, H, HNH, HWH, Replaces Delco Remy manufacturer number 1100506, 1101371, 1101377, 1101390, Replaces manufacturer number 10159, 340-140, 92-01-3039, Delco Style, Voltage: 6, Rotation: Clockwise, Amperage: 17, Regulator: External, (Item #: 203524) $420.00

Generator Pulley - Used on John Deere models: A, B, G, 50, 60, 70, AO, AI, AR, BO, BR, D, H. This pulley fits Delco generator numbers: 1100955, 1101356, 1101371, 1101777, 1100506, 1100508, 1101390, 1101755, 1100955, 1101385, 1101401, 1101720, 1101756, 1101784, 1101377. The pulley measures 4.500 inches outside diameter, 0.507 inch belt groove width, 0.670 inch inside diameter, with a 0.127 inch keyway. This part replaces OEM B1030R (Item #: 179405, Ref: B1030R) $57.00

Governor Spring - For John Deere tractor models B (s/n 201000-later), R (w/ Pony Motor), 50, 520, 530, Replaces John Deere OEM number B2636R, (Item #: 125553) $44.00

Governor Weight, Used - For John Deere tractor models B, BN, BNH, BO, BR, BW, BWH, 50, 70, 520, 530, 620, 630, Replaces John Deere OEM nos AB295R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499799) $76.01

Ignition Key - Only - For John Deere tractor models A, AO, AR, B, G, 80, 420, 820 (2-Cylinder), 830 (2-Cylinder), 1010, 2010, 2510, 3010, 3020, 4010, 4020, 5010, 5020, 8020 Replaces John Deere OEM number A4700R, , Compatible with Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, Compatible with Massey Ferguson Construction and industrial models 200, Replaces Massey Ferguson OEM number 180292M1, 192427M1, (Item #: 121147) $3.00

Ignition Kit, Delco Clip-Held Distributor Cap - Contains points, condenser, and rotor. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. For: A, AN, AH, AR, AO, B, BN, BW, D, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010 (to 42000), 2010 (to 42000), 3010 (to 1E32999), 4010 (to For 1010), 105, 114W, 116W, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111558. (Item #: 103151, Ref: ATK1DCR) $10.80

Ignition Kit With Rotor, WICO XB Distributor - Ignition kit, with rotor. Contains:Points, gauge, condenser. 2-piece points using Wico XB Distributor. For A (659290- 662873)~ AR, AO (275397-532), B (268804 and up), 50 (5000001 - 5016449). For 50, A, AO, AR, B (Item #: 105594, Ref: ATK8WXBR) $52.00

Ignition Switch - For John Deere tractor models A (Ignition s/n 477000-502231), B (Ignition 325000-later), D (Ignition s/n 143800-188057), 2155, 2350, 2355, 2355N, 2510, 2550, 2555, 2750, 2755, 2855, 2855N, 2950, 2955, 3020 (Ignition s/n 68000-122999), 3055, 3150, 3155, 3255, 4020 (Ignition s/n 91000-200999), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010 (s/n 8000-later), 5020 (Ignition s/n 24999-ealier), 6030, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6415, 6420, 6420L, 6500, 6500L, 6505, 6510, 6510L, 6520, 6520L, 6605, 6615, 6715, 7020, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610 (s/n 89999-earlier), 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (1974-1981), 8440, 8450, 8520, 8520T, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Compatible with John Deere Combine (s) CTS, 4425, 4435, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9500 SH, 9510, 9550, 9550 SH, 9560, 9560 SH, 9560 STS, 9570, 9570 STS, 9600, 9610, 9650, 9650 CTS, 9650 STS, 9660, 9660 CTS, 9660 STS, 9670, 9770 STS, 9860 STS, 9870 STS, Compatible with John Deere Harvester (s) 7440, 7445, 7450, 7455, 9900, 9910, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976, 9986, Compatible with John Deere Construction and industrial models 210C, 300D, 310, 310A, 310B, 310C, 310D, 310E, 310G, 310SE, 310SG, 315C, 315D, 315SE, 350D, 410 (also the ignition switch), 410B, 410C, 410D, 410E, 410G, 450C, 482C, 500 (s/n 68000-later), 500A (s/n 123113-earlier), 500C, 510, 510B, 510C, 510D, 600 (s/n 91000-200999-later), 610B, 610C, 710B, 710C, 710D, 760, 760A, Replaces John Deere OEM number R39554, AR46184, AR47373, AB1837R, (Item #: 121159) $13.10

Key Switch, 2 Terminal - With keys. For tractor models 420, (A from SN# 662874 and up), (AO, AR from SN# 275533 and up), (B from SN# 268820 and up), (G from SN# 46501 and up), 80, (820, 830 2-cylinders). Replaces A4699R, AA5592R, AB4063R, AB4087R. (Item #: 111037, Ref: AB4063R) $33.00

Light Clamp - This Light Clamp fits: (A Styled models up to serial number 583999 with cast iron dash), (B Styled models up to serial number 200999 with cast iron dash), (G serial number 13000 and up for rear light only), H, (60, 620, 630 Standard and Orchard), (8020 Used as an oil level pipe clamp). Replaces: A2613R (Item #: 126559, Ref: A2613R) $11.20

No
Picture
Light Switch, 6 Volt - For John Deere tractor models A (s/n 477000-583999), B (s/n 325000-later), D (s/n 143800-186751), G (s/n G13000-525999), Replaces John Deere OEM number AF708R, AB2687R, AF687R, 6 Volt, (Item #: 173454) $54.00

Light Switch Knob - For John Deere tractor models A, B, D, G, H, L, LA, R, Replaces John Deere OEM number F690R, (Item #: 126562) $14.60

Magneto Cap - For Wico model C Magneto, tractor models A, AO, AR, B, BO, BR, D, G, H, R. Has "WICO" heat stamped on outer face like original. (Item #: 107080, Ref: X2938) $50.00

Magneto Cap with Gasket - For WICO model X, for tractors AO, AR, A, B, BO, BR, D, G, H, R. Replaces: gasket: X5618, X5644, cap: X5643 (Item #: 105667, Ref: X5643) $57.00

Magneto Coil - For WICO model C magneto. For tractors A, AO, AR, B, BO, BR, D, G, H. Replaces: AR12011R and X2766. (Item #: 105659, Ref: X2766) $99.00

Magneto Coil - For WICO model X. For tractors A, AO, AR, B, BO, BR, D, G, H, R (Item #: 111196, Ref: X5700) $99.00

Magneto Condenser - For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Item #: 179181, Ref: TP-AR31316) $22.60

Magneto, Early - This complete Magneto is used on tractor models: A up to serial number 487999, AI, AO serial number 251486-253520, AR serial number 251486-258799, B up to serial number 89999, BI serial number 325600-331499, BO and BR up to serial number 331499, G up to serial number 13000, D serial number 130700 and up, W, and WSP. The long prong measures 5/8 inch from the drive to the end of the lug. (Item #: 180165, Ref: XH477B) $512.00

Magneto Ignition Kit - Ignition kit, less rotor. Contains:Points, gauge, condenser. 2-piece points using Wico XB Distributor. For A (659290- 662873)~ AR, AO (275397-532), B (268804 and up), 50 (5000001 - 5016449). For 50, A, AO, AR, B (Item #: 179217, Ref: ATK8WXB) $73.00

Magneto, Late - Complete Magneto for models, A SN# 488000 and up, AO SN# 260000 and up, AR SN# 250000-251485 and 258800 and up, B SN# 90000 and up, BI SN# 331500 and up, BO and BR SN# 3315009 and up, H, G SN# 13000 and up, 50, 60. Short prong - 1/4 inch from drive to end of lug. (Item #: 178600, Ref: XH1042) $480.00

Magneto Point Set - For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Item #: 112107, Ref: AR31317) $18.30

Magneto Point Set - For XH894, XH477B, XH1042, XH3001, XH909 Magnetos. (Item #: 172995, Ref: FXH2100B) $20.70

Magneto, Remanufactured, AA3870R - For John Deere tractor models A (s/n 488000-later), B (s/n 90001-later), G (s/n 11981-later), H (s/n 12001-later), Replaces John Deere OEM number AA3870R, AH653R, Short lug - 3/8", For Tune-Up Kit use Item #: 105594, (Item #: 203721) $860.01

Magneto, Remanufactured, AB2875R - For John Deere tractor models A (s/n 487999-earlier), B (s/n 90000-earlier), G (s/n 11980-earlier), H (s/n 12000-earlier), Replaces John Deere OEM number AB2875R, AB3674R, Long lug - 1/2"-3/4", For Wico X, XH, XV Tune-Up Kit use Item #: 107080, (Item #: 203605) $740.01

Magneto Tune-up Kit - Fits Wico X, XB, XH, XV magnetos Kits contain heavy duty point set, vibration-resistant condensor, and rotor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. (Item #: 105594, Ref: 569632) $52.00

Magneto Tune-up Kit - For WICO model C. Tractor Models A, AO, AR, B, BO, BR, D, G, H, L, LA, LI. Contains Points, Condenser and rotor (Item #: 180662, Ref: R6846) $60.00

Rotor - Used with Delco distributors with a clip held cap. For tractor models: A, AO, AR, B, D, G, M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 1010 (1112577), 2010 (1112577), 3010 (1112577), 3020 (up to serial number 58899 and 1112577), 4010 (up to serial number 39499 and 1112581). Replaces 1905590. (Item #: 110177, Ref: 1750498M1) $3.60

Spark Plug Wire Holder - This is a Rubber Spark Plug Wire Holder used on John Deere A, B, G, 50, 60, 70 Tractors. It measures 0.755 inches thick, 0.755 inches wide and 1.375 inches long. Replaces A470R (Item #: 126684, Ref: A470R) $7.10

Spark Plug Wire Set - This is an Original Style with Cotton Braid Wire and copper core with RAJAH terminals has one end preassembled, Crimp Other End With A Crimping Tool. Replaces AA1222R, AA1890R, AB3480R, AB3481R, AB830R, AD1415R, AD1454R, AD1544R (Item #: 178937, Ref: R6591) $41.00

Spark Plug Wire Set - 2 cylinder spark plug wire set with 90 degree boots. For the following models: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, L, LA, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 128569, Ref: JDS643) $16.30

Starter Armature - Used with Delco Starter # 1107155, 1107424, 1107445 on John Deere (B with serial number 96000 to 200999), BO, BR, (70, 730, 80, 820, 830 with a pony start diesel). Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Item #: 182636, Ref: 1871662) $110.00

Starter - Delco Style (4362), Remanufactured, Delco Remy, 1107942, TY26041 - For John Deere tractor model B (s/n 201000-later), Replaces John Deere OEM number TY26041, AB3700R, AB4094R, AR11151, TY1462, TY6642, Replaces Delco Remy manufacturer number 1107942, 1107193, Replaces manufacturer number 4362, Voltage: 6, Rotation: Clockwise, Teeth: 9, (Item #: 203467) $412.00

Starter Drive - For B, 50. Starter Drive used with Starter 1108155. 9 Teeth. Note: Not a complete starter. (Item #: 110780, Ref: 1909771) $41.00

Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $56.00

Starter Pedal Lever - For tractor models A, B, H. Starter Pedal Lever. (Item #: 115160, Ref: A2621R) $22.72

Starter Rod Bushing - For John Deere tractor models B (s/n 201000-later), 50, 520, Replaces John Deere OEM number B2287R, Inner Diameter: 0.406", Outer Diameter: 1.000", Thickness: 0.505", Mounts on top of flywheel cover, (Item #: 126702) $23.30

Starter Switch - Starter Switch button type For 50, 60, 70, A, B, G, R. (Item #: 105692, Ref: 820052) $10.80

Starter Switch - For tractor models A up to serial number 502231, AO up to serial number 272000, AR up to serial number 272000, B up to serial number 200999), H, L, LA, M, MC, MT, R, 320, 330, 40, 420, 430, 440, 50, 60. Replaces: 1882323, AT21265. (Item #: 105669, Ref: 1925781) $9.90

Voltage Regulator - For B, R, both 1947 to 1954, 25 combine, 45 combine, 55 combine, 65 combine. 6 volt positive ground. Regulator for use with generators 1100506, 507, 1101390, 397, 1947580. Saddle Mount. (Item #: 105284, Ref: VR1813) $31.00

Voltage Regulator Conversion Kit - Used with VR1813 and VR1814 regulators when replacing Delco Cutouts 1116766, 1116807, 1116809 and 1116816 or control units 5839, 5851 and 5894, therefore modernizing Generator System. A, AO, AR, B, BO, BR, G, H, L, LA, M, MC, MI, MT (Item #: 184930, Ref: VRK1815) $65.00

Wico X Series Magneto Rebuild Kit - This Magneto rebuild kit is for the Wico X Series magneto. This magneto was used on model A, AH, AI, AN, ANH, AO, AR, AW, AWH, B, BI BN, BNH, BO, BR, BW, BW40, BWH, BWH40, D, G, GH, GM, GN, GW, R, W111, W113. Kit contains Cover gaskets, points, condenser, felt wipers, points and condenser screws, bearing seal, rear bronze bushing, oil slinger, impulse plate gasket, mounting gasket, dust cover unit gasket, ground connecter, inspection window, inspection window gasket. Depending on the magneto number, some of these parts may not be required. (Item #: 133558, Ref: ABC3723) $61.00

Wiring Harness - For John Deere tractor model B (s/n 201000-later with magneto or distributor with voltage regulator), For 6 volt generator systems only with voltage regulator, Cotton braided - exactly like original, Includes headlight wires and wiring instructions, All terminals are soldered and sealed, (Item #: 126796) $213.58

Wiring Harness - 6V Systems - For John Deere tractor model B (s/n 201000-earlier with magneto or distributor with cut-out relay), For 6 volt generator systems only with cut-out relays, Cotton braided - exactly like original, Includes headlight wires and wiring instructions, All terminals are soldered and sealed, (Item #: 126795) $213.58

Engine Bearings

No
Picture
Engine Rod Bearing (STD) - Rod Bearing in standard. For B, BN, BW, all from SN# 96000, 50. Standard size journal measures 2.7485". 2 required per engine price is for each. Replaces YTO CB-469P-STD, AB4941R, NAB491R, B3202R, B3470R, and AB4627R, (Item #: 106735) $32.00

No
Picture
Main Bearing - .020" Oversize - Set - For John Deere tractor models B, BO, BR, Compatible with John Deere Engine (s) 175 (gas), 190 (gas), Bearing Size: .020" Oversize, Sold in complete sets, (Item #: 159184) $500.00

No
Picture
Main Bearing - Standard - Set - For John Deere tractor models B, BO, BR, Compatible with John Deere Engine (s) 175 (gas), 190 (gas), Bearing Size: Standard, Sold in complete sets, (Item #: 159183) $817.00

PTO Shaft Oil Seal Housing Gasket - For John Deere tractor models A (s/n 488000-later), ANH (s/n 488000-later), AO (less Powertrol), AR (less Powertrol), AW (s/n 488000-later), B (s/n 201000-later), BN (s/n 201000-later), BNH (s/n 201000-later), BW (s/n 201000-later), BWH (s/n 201000-later), G (s/n 43352-later), GH (s/n 43352-later), GM (s/n 43352-later), GN (s/n 43352-later), GW (s/n 43352-later), R, 50, 60 (s/n 6025403-earlier with engine driven PTO), 70 (s/n 7017500-later with transmission driven PTO and less Powertrol), Replaces John Deere OEM number A2396R, (Item #: 153580) $4.60

No
Picture
Rod Bearing - Rod Bearing in 0.010. For B, BN, BW, all from SN# 96000, 50. Journal measures 2.740 inch. 2 required per engine price is for each. Replaces YTO CB-469P-010, AB4942R, and NAB4924R. (Item #: 106736) $32.00

No
Picture
Rod Bearings - Rod Bearing in 0.020. For B, BN, BW, all from SN# 96000, 50. Journal measures 2.730 inch. 2 required per engine price is for each. Replaces YTO CB-469P-020, AB4944R, NAB4944R. (Item #: 106737) $32.00

Engine Gaskets

Carburetor Mounting Gasket - For John Deere tractor models A (series), B (series), D, G, H, Replaces John Deere OEM number 321R, Carburetor to manifold mounting gasket, (Item #: 112103) $0.90

Cork Flywheel Spacer Washer Oil Seal - This Cork Flywheel Spacer Washer Oil Seal has a 2.24 inch Inside Diameter, a 2.648 inch Outside Diameter and is .32 inch wide. Installs in oil slinger housing behind the flywheel. Used with AB251R or AB4109R spacer. It Fits: B, BI, BN, BNH, BO, BR, BW, BW40, BWH, BWH40. Replaces: B130R (Item #: 182948, Ref: B130R) $22.64

No
Picture
Full Gasket Set - Complete engine gasket set. For model B serial number 60000 to 95999. Comes with Lead Washers. The head gasket in this kit is metal with a fiber core. (Item #: 183815, Ref: FS3875) $255.00

Full Gasket Set - For tractor models B, BN, BW (To S#59999)BO, BR (To S#328999). (Item #: 184250, Ref: FS7381S) $263.00

Full Gasket Set - This Gasket Set does not come with crankshaft seals. For tractor models B, BN, BW all (S#96000-#200999). (Item #: 189958, Ref: FS7513S) $135.00

Head Gasket Set - For tractor models B, BN, BW (All S#96000-#200999). Also John Deere 50 "All Fuel". Includes Sealing Washers. Replaces: B1785R, B3089R, (Item #: 106865, Ref: HS7513S) $96.00

Head Gasket Set - For tractor models B, BN, BW (From S#201000). (Item #: 106865, Ref: HS1738S) $96.00

Oil Pump Gear Cover Gasket - For John Deere tractor models A (s/n 424025-later), ANH (s/n 424025-later), AO (s/n 251486-later), AR (s/n 251486-later), AW (s/n 424025-later), B, BN, BNH, BO, BR, BW, BWH, G, GH, GM, GN, GW, H, HNH, HWH, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number B246R, 0.020" Thick, 4 Bolt Hole, (Item #: 164422) $8.20

Oil Pump to Crankcase Gasket - For John Deere tractor models A (s/n 424025-later), AO (s/n 251486-later), AR (s/n 251486-later), AW (s/n 424025-later), B, BN, BNH, BO, BR, BW, G, GH, GM, GN, GW, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number B251R, 0.031" Thick, 3 Bolt Hole Pattern, (Item #: 164421) $8.20

Overhaul Gasket Set - For B, BN, BW with 2cyl 190 CID Gas after SN# 201000. Full Gasket Set. (Item #: 106921, Ref: FS1738S) $135.00

Valve Cover Gasket - This valve cover gasket fits the following tractor models: B, BO, and BR. Replaces part number: B1498R. (Item #: 179408, Ref: B1498R) $16.60

Engine Rebuild Kits

Engine Rebuild Kit - Less Bearings - 9 Stud Head, 190 - For John Deere tractor model B (s/n 201000-later), Compatible with John Deere Engine (s) 190 (gas), Bore: 4.6875", 4.250" piston compression height, 9 stud head, Less pan gasket, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 159184, (Item #: 130642) $1009.01

Rebore Kit, .125 Oversize - Piston Kit For B, BN, BR, and BW S#201001 and up, and 50. 4 11/16 bore, .125 oversize. Contains pistons, rings, pins, and retainers. (Item #: 185832, Ref: R1981) $605.00

No
Picture
Rebore Kit, .125 Oversize - Piston Kit for B, BN, BR, and BW Serial number 60, 000 thru 96, 000, 50 all with 1.23 inch piston pin and 4 1/2 inch bore plus .125. Contains Pistons, rings, pins and retainers. (Item #: 184994, Ref: R7356) $674.00

No
Picture
Rebore Kit, Standard - Piston Kit For B, BN, BR, and BW S#60, 000 thru 96, 000, 50 all with 1.23 inch piston pin and 4 1/2 inch bore. Contains pistons, rings, pins and retainers. (Item #: R7353) $448.50

No
Picture
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models (B up to SN# 95999), BO, BR. (Item #: 184140, Ref: VTKJDB) $373.00

No
Picture
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models (B from SN# 96000 and up), 50. (Item #: 185059, Ref: VTKJD50) $340.00

Engine Parts

1st and 3rd Speed Sliding Gear, Used - For John Deere tractor models B (s/n 60000-later), 50, 520, 530, Replaces John Deere OEM nos AB4184R, B2431R, Teeth: 19, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430630) $129.01

Compression Relief Petcock - Brass. For A, B, D, G and GP series. (Item #: 126174, Ref: AB1898R) $49.00

Crankcase Vent Tube - For model B from SN# 1000 up to 42199. (Item #: 179849, Ref: B59R) $76.00

No
Picture
Crankcase Vent Tube - For model B with hand start SN# 60000 to 200999. (Item #: 179111, Ref: B1829R) $63.00

No
Picture
Crankcase Vent Tube - For model B SN# 201000 to 258519. (Item #: 179857, Ref: B2657R) $81.00

No
Picture
Crankcase Vent Tube - For model B from SN# 258520 and up. (Item #: 179852, Ref: B2832R) $62.00

No
Picture
Crankcase Vent Tube - For B with SN# 60000 to 200999. Crankcase Vent Tube. (3284R) (Item #: 179812, Ref: B1604R) $79.00

No
Picture
Crankshaft, Remanufactured, AB1559R, B1303R - For John Deere tractor model B (s/n - B60000-B959999), Replaces John Deere OEM number AB1559R, Replaces John Deere Casting number B1303R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Additional Handling and Oversize Fees Apply To This Item, (Item #: 210339) $570.01

No
Picture
Crankshaft, Remanufactured, B1847R - For John Deere tractor model B, Replaces John Deere Casting number B1847R, B2460R, B2740R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 204137) $465.01

No
Picture
Cylinder Head - For tractor models (B unstyled SN# 1000-59999, (BO, BR SN# 325000-328999). Replaces B357R. Comes with Valve guides and Seats only. (Item #: AB311R) $548.90

Cylinder Head, Remanufactured, B1306R - For John Deere tractor models B (s/n B60000-B95999), BN (s/n B60000-B95999), BNH (s/n B60000-B95999), BO (s/n 329000-later), BR (s/n 329000-later), BW (s/n B60000-B95999), BWH (s/n B60000-B95999), Replaces John Deere Casting number B1306R, Engine 190 (gas), Cylinders: 2, Casting No. B1306R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200273) $790.01

Cylinder Head, Remanufactured, B1784R, B2501R, B2871R, AB4204R - For John Deere tractor models B (s/n B96000-later), BN (s/n B96000-later), BNH (s/n B96000-later), BW (s/n B96000-later), BWH (s/n B96000-later), Replaces John Deere Casting number B1784R, B2501R, B2871R, AB4204R, Cylinders: 2 (gas), Casting No. B1784R, B2501R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200274) $900.01

Float Valve - Stainless steel needle float valve~ hard chrome needle. For: A, B, C, D, G series~ 50, 60 all fuel. Replaces AR10077. For 50, 60, A, B, C, D, G (Item #: 183782, Ref: TP-AR10113R) $18.90

Flywheel Inspection Cover Plate, Used - For John Deere tractor models A (s/n 584000-later), AO (s/n 272000-later), AR (s/n 272000-later), B (s/n B201000-later), BN (s/n B201000-later), BNH (s/n B201000-later), BW (s/n B201000-later), BWH (s/n B201000-later), 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number AB3579R, 7-1/4" diameter, Includes springs, For a new version of this item use Item #: 125037, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 425037) $19.75

Governor Shaft Bearing - This Governor Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Item #: 172930, Ref: JD7654) $39.00

Ring Gear, Flywheel - This ring gear is for tractor models (B SN# 201000 and up), 50, 520, 530. 170 Teeth. Replaces original part number B2462R (Item #: 110998, Ref: B2462R) $129.00

No
Picture
Valve, Exhaust - For B. Exhaust Valve (each) For serial #96000 and up. (Item #: 108981, Ref: R-B2503R) $21.70

Valve, Exhaust - For tractor models (B up to SN# 95999), BO, BR. Replaces B2878R. (Item #: 179501, Ref: B363R) $36.00

No
Picture
Valve Guide - Guide, intake and exhaust valve, 4 used per engine. For gas engine, 2 cylinder, 190 CID 4-11/16 bore. For 50, (B SN# 96000 and up). Price shown is for each, sold only in multiples of 4 items. (Item #: 108979, Ref: B1927R) $12.70

No
Picture
Valve Guide - For tractor models (B up to SN# 95999, BO, BR. Replaces AB4058R (Item #: 179496, Ref: B358R) $21.80

Valve, Intake - Single Intake Valve - For model B Serial #96000 and up, M. (Item #: 108980, Ref: R-B2863R) $26.80

No
Picture
Valve, Intake - For tractor models (B up to SN# 95999), BO, BR. (Item #: 179500, Ref: B362R) $33.00

No
Picture
Valve Keepers - For B before Ser #96000. Valve keepers (per valve). If you need keepers for after serial # 96000, they are part number B1797R available only from a John Deere Dealer. (Item #: 128566, Ref: 216-5080) $0.50

No
Picture
Valve Spring - For tractor models 50, (B from SN# 96000 and up). (Item #: 131569, Ref: B1794R) $20.80

Engine Pistons and Sleeves

No
Picture
Piston Pin Bushing - For 1.417" Diameter Piston Pin. On tractor models B From S#96000, 50, 520. All with rod numbers B3201R, B3652R or B1770R. 2 Required per engine. (Item #: 184564, Ref: 814830) $23.50

Engine Rings

No
Picture
Piston Ring Set - For John Deere tractor models B (s/n 59999-earlier, With 2-Cylinder Gas Engine), BO (s/n 328999-earlier, With 149 2-Cylinder Gas Engine), BR (s/n 328999-earlier, With 149 2-Cylinder Gas Engine), 4-1/4" + .030" with 4-3/16" Compression and 4-3/16" Oil, (Item #: 167088) $124.00

No
Picture
Piston Ring Set, .045 Overbore - For B, BN, BR, and BW S#201001 and up, and 50. 4 11/16 bore".045 oversize. For pistons that use: 4 compression rings at 3/16 inch and 1 oil ring at 5/16 inch. Complete set for 1 engine. (Item #: R2030R) $130.36

Piston Ring Set - .045" Oversize - 2 Cylinder - For John Deere tractor models B (s/n 60000-95999), BO (s/n 329000-337514), BR (s/n 329000-337514), Compatible with John Deere Engine (s) 175 (gas), Replaces John Deere OEM number AB3727R, Standard Bore: 4.500", Ring Size: .045" Oversize, Compression Rings per Piston: (3) @ .188", Oil Rings per Piston: (1) @ .188", Top Groove Size: .188", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .188", 2nd Groove Style: Torsional, 3rd Groove Size: .188", 3rd Groove Style: Torsional, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold as a complete 2 cylinder set, For standard use Item #: 129168, (Item #: 129167) $143.00

No
Picture
Piston Ring Set, .090 - For B, BN, BR, and BW S#201001 and up, and 50. 4 11/16 bore".090 oversize. For pistons that use: 4 compression rings at 3/16 inch and 1 oil ring at 5/16 inch. Complete set for 1 engine. (Item #: 129106, Ref: 2C4965-090) $233.00

Piston Ring Set - .090" Oversize - 2 Cylinder - For John Deere tractor models B (s/n 96000-200999), BO (s/n 329000-337514), BR (s/n 329000-337514), Compatible with John Deere Engine (s) 175 (gas), Standard Bore: 4.500", Ring Size: .090" Oversize, Compression Rings per Piston: (3) @ .188", Oil Rings per Piston: (1) @ .188", Top Groove Size: .188", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .188", 2nd Groove Style: Torsional, 3rd Groove Size: .188", 3rd Groove Style: Torsional, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold as a complete 2 cylinder set, For standard use Item #: 129167, (Item #: 129168) $191.00

No
Picture
Piston Ring Set, .125 Oversize - For model For B, BN, BR, and BW S#201001 and up, and 50. 4 11/16 bore".125 oversize.. Piston Rings set for 1 engine fits pistons in rebore kit R1981. (Item #: 129107, Ref: 2C4965.125) $221.00

Piston Ring Set - Standard - 2 Cylinder - For John Deere tractor models B (s/n 60000-95999), BO (s/n 329000-337514), BR (s/n 329000-337514), Compatible with John Deere Engine (s) 175 (gas), Replaces John Deere OEM number AB3982R, Bore: 4.500", Ring Size: Standard, Compression Rings per Piston: (3) @ .188", Oil Rings per Piston: (1) @ .188", Top Groove Size: .188", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .188", 2nd Groove Style: Torsional, 3rd Groove Size: .188", 3rd Groove Style: Torsional, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, Sold as a complete 2 cylinder set, For .045" use Item #: 129168, (Item #: 130039) $152.00

No
Picture
Ring Set - For B, BN gas SN# 201000/UP, 50 gas, 2 Cyl, 190 CID 4-11/16" bore. Set for one engine. Each piston contains 4 compression 3/16, 1 Oil 5/16. (Item #: 128898, Ref: PRS1239) $242.00

Exhaust System

No
Picture
Chrome Curved Exhaust Stack - For Unstyled B. Chrome Curved Exhaust Stack with 3 Bolt Flange. 3 inch O.D., 24 inches long. (Item #: 180700, Ref: R4257) $287.00

Chrome Curved Exhaust Stack - For Styled B, 50, 520, 530. Chrome Curved Exhaust Stack. (Item #: 115071, Ref: R3592) $219.00

Chrome Exhaust Pipe - For Unstyled B with 3 bolt flange. Chrome Exhaust Pipe. Straight Pipe. (Item #: 179180, Ref: R4256) $274.00

Chrome Straight Exhaust Pipe - For Styled B, 50, 520, 530. Chrome Straight Exhaust Pipe, 4 bolt flange. The original pipe has a dent for the steering column. This pipe is skinner than the original and does not need the dent. This pipe is 3 inches outside diameter and 24 inches long. (Item #: 178672, Ref: R3591) $250.00

Exhaust Manifold Gasket Set - This gasket set is for manifolds R5898 and B1313R only, on model B. Includes manifold and carburetor mounting gaskets. (Item #: 161674, Ref: R5897G) $18.20

Exhaust Manifold Gasket Set - This gasket set is used on manifold part numbers AB2846R and B2472R only. For model B. (Item #: 101573, Ref: R0149G) $18.00

Exhaust Pipe - 2 Bolt inlet, 21" vertical length, 19" horizontal length, 1-7/8" outlet O.D, black. Used with manifold AB2846R and muffler AB2700R. For model B styled SN# B6000-B183971. (Item #: 120190, Ref: AB1526R) $61.48

Exhaust Pipe - 2 bolt inlet, 21" vertical length, 19" horizontal length, 1-7/8" outlet O.D, black. Used with manifold B73R and muffler AB2700R. For model B unstyled SN# B1000-B42199. (Item #: 109909, Ref: AB322R) $58.92

Exhaust Pipe - 2 bolt inlet, 21" vertical length, 19" horizontal length, 1-7/8" outlet O.D. Used with manifold B2179R, AB3980 casting# B2803R and muffler AB2700R. For tractor models B, BN, BNH, BW all with SN# B96000-B200999 built between 1939-1947. (Item #: 110483, Ref: AB3427R) $52.55

Exhaust Pipe - 2 bolt inlet, 25" vertical length, 20" horizontal length, 1-7/8" outlet O.D. Used with manifolds B2282R, B2472R, AB3980R casting# B2803R and muffler AB2700R. For tractor models B, BN, BNH, BW. All SN# B201000 and up. (Item #: 108024, Ref: AB3536R) $44.00

Manifold - USA made. For model B all-fuel up to SN# 59999. R5897G for Mounting Gaskets (Item #: 101572, Ref: B73R) $267.00

Manifold - USA made. For model B all-fuel SN# 60000 to 95999. Replaces: B1313R (Item #: 189976, Ref: R5898) $305.00

Manifold - USA made. For model B all-fuel from SN# 96000 to 183971. Replaces B1786R. Dies not come with gaskets. Uses gasket set R0149G. (Item #: 178970, Ref: AB2846R) $305.00

Manifold - For B up to SN# 95999, Johnson Cold Gas Style. Does not come with gaskets. Uses gasket set R5897G. (Item #: 101572, Ref: B1313R) $267.00

$John Deere B Manifold Intake\Exhaust$
Manifold Intake/Exhaust - Manifold for model B after serial number 201000. Does not include gaskets. Uses gasket set R0149G. Will replace the mid-range serial numbers GAS models (not ALL FUEL) but is not exactly like original and must use exhaust pipe part number R1105. (Item #: 101574, Ref: B2472R) $183.00

Manifold Pipe - For John Deere tractor model B (Unstyled s/n B1000-B42199), Replaces John Deere OEM number AB322R, Type:Manifold Pipe, Shell:N/A, Inlet Type:2-Bolt, Vertical Length:21", Horizonal Length:19", Outlet O.D.:1-7/8", Use With Muffler 101171, (Item #: 120189) $69.00

Muffler - With bracket. For model B SN# 60000 to 95999. Replaces B1510R. (Item #: 180179, Ref: AB1524R) $162.00

Muffler, Vertical - This restoration quality muffler will be a perfect addition to your tractor. The shell length is 18.200 with a shell diameter of 3.150. The outlet length measures 6.280 and the outlet OD measures 1.875. The overall length of this muffler is 24.600. Fits John Deere B serial number 96000 and up. Replaces: AB2700R (Item #: 112463, Ref: AB2700ROE) $85.71

Muffler, Vertical - Has 4 Hole Baseplate. Outlet is 2 1/4 inch O.D., 24 inches overall length. For tractor models B SN# B96000 and above, BN, BW, 50, 520, 530. Has 4 bolt square mounting flange. (Item #: 101171, Ref: AB2700R) $40.00

Muffler with Bracket - For model B unstyled up to SN# 59999. Replaces AB209R. (Item #: 179859, Ref: B17R) $172.00

Radiator Bolt Kit - For JD B, serial number 1000-59999 (Item #: 115513) $47.58

No
Picture
Stainless Steel Muffler - For John Deere tractor model B (s/n 96000-later), Replaces John Deere OEM number AB2700R, Polished Stainless Steel (Discoloration due to extreme heat is possible), Shell Length: 18-1/4", Shell Diameter: 3-1/8', Outlet Length: 6-5/16", Outlet OD: 1-7/8", Overall Length: 24-11/16", (Item #: 164544) $133.00

Stainless Steel Straight Exhaust Pipe - For Styled B, 50, 520, 530. Stainless Steel Straight Exhaust Pipe. (Item #: 178673, Ref: R3548) $245.00

Stainless Steel Straight Pipe - For B Unstyled. Stainless Steel Straight Pipe. With 3 bolt Flange (Item #: 179052, Ref: R3544) $298.00

Stud, Manifold - 7/16" x 4-3/8". For tractor models A, (AO, AR from SN# 272000 to 281999), B, (BO, BR from SN# 325000 and above), H. Replaces R2622R. Uses R5294 nut. (Item #: 178414, Ref: A126R) $10.30

Stud, Manifold - 7/16" x 3". For tractor models (50 up to SN# 5015950), (B all fuel from SN# 183972). Uses R5294 nut. (Item #: 178407, Ref: A674R) $6.50

Stud, Manifold - 7/16" x 4-3/4". For tractor models (A all-fuel from SN# 488000 to 583999), (AO, AR from SN# 250000 to 259999), (B from SN# 1000 to 529999). Uses R5294 nut. (Item #: 178413, Ref: B359R) $6.50

Stud, Manifold - 7/16" x 4". For tractor models (B from SN# 6000 and above), (BO, BR from SN# 239000 and up). Uses R5294 nut. (Item #: 178412, Ref: B1314R) $6.50

Stud, Manifold - 7/16" x 1-7/8". For model B gas from SN# 201000 and above. Uses R5294 nut. (Item #: 178405, Ref: K3083R) $5.40

Stud Nut, Manifold - Original 7/16 inch style with oversized shoulders. Replaces 10A1052, 17890A, 30-3462161, 369065X1, 50A1008, 915834. For the following tractors: A, B, AI, AR, BO, BR, H (Item #: 183464, Ref: R5294) $1.70

Fuel System / Air Intake

3-Way Fuel Valve - Made of brass. For tractor models (A SN# 497590 to 697756), (AR, AO SN# 260000 to 280849), (B SN# 94494 to 305246), (D SN# 148872 to 191777), (H SN# 20650 and up), (G SN# 13000 to 59701). (Item #: 125700, Ref: AB2805R) $95.00

3-Way Fuel Valve - For tractor models (A SN# 410859-476999), (B SN# 1000-11621), (D SN# 30400-143799), GP. (Item #: 121906, Ref: AD680R) $75.00

3-Way Fuel Valve - For tractor models (AR SN# 250000-259999), (B SN# 11622-59999), (BR SN# 325000 and up), (G (SN# 1000-12999). (Item #: 121905, Ref: AB609R) $84.00

Air Cleaner Oil Cup - Cup is 5 3/4 inches O.D. at the lip. Fits B SN# 60000 and up, BR-BO SN# 329302 and up, H, 50, 520 and 530. For clamp style air cleaners, not clip style. Replaces 1001012M91, 10P1146, 10P931, 1754014M1, 1K-6054, 1K-6054, 311510, 362974R91, 375550R91, 378333R1, 52864DA, AB1626R, AB3477R, AM3172T, AM465T, AM468T, AT10592, G46325 (Item #: 108775, Ref: AB1626R) $32.00

Air Cleaner Stack, 15 Inch - Measuring 15 inches high with a three bolt mount, this Air Cleaner Stack fits John Deere B up to serial number 59999 (Item #: 179243, Ref: AB649R) $107.00

Air Cleaner Stack, 22 Inch - Measuring 22 inches high with a three bolt mount, this Air Cleaner Stack fits John Deere B up to serial number 59999 (Item #: 126380, Ref: AB239R) $124.00

Air Filter, Crankcase - For tractor models B, H. (Item #: 182547, Ref: AB233R) $33.00

Air Intake System - Air Stack For Styled B (From SN# 60000). Replaces AB1463R, AB3641R. (Item #: 111046, Ref: R2472) $69.00

Carburetor - This carburetor is built to replace the Marvel Schebler DLTX10, DLTX34, DLTX67, DLTX73. Replaces John Deere part numbers AB237R, AB2711R, AB3470R, AB3533R, AB3740R. Note: Choke lever is for electric start tractors. (Item #: 149817, Ref: DLTX73) $520.00

Carburetor Bowl Nut Spring - A, B, D, (G DLTX24 Only), GP, (50 All fuel only up to serial number 5015950), (60 All fuel only up to Serial Number 6013899). Used on Marvel Schebler DLTX10, DLTX15, DLTX16, DLTX18, DLTX19, DLTX24, DLTX33, DLTX34, DLTX41, DLTX53, DLTX6, DLTX63, DLTX67, DLTX71, DLTX72, DLTX73 Replaces John Deere Part Numbers: R10078, R10078R (Item #: 118930, Ref: R10078) $4.50

Carburetor Choke Shaft, DLTX - Carburetor Choke shaft and lever. For tractors: A, B, G, using Marvel-Schebler carburetor models: DLTX34, DLTX51, DLTX53. For 105, 1207, 1209, 1214, 1217, 1219, 130, 135, 1380, 1480, 183, 220, 230, 240, 330, 335, 375, 385, 430, 435, 45, 480, 483, 485, 530, 535, 55, 6602, 78, 95. (Item #: 110736, Ref: AR10043) $4.98

Carburetor Float, DLTX - For Early A, Early B, D, GP, G. Carburetor Float for use with DLTX10, DLTX15, DLTX17, DLTX18, DLTX19, DLTX24, DLTX34, DLTX38, DLTX41, DLTX51, DLTX53, DLTX63. (Item #: 108457, Ref: AR10066) $23.20

Carburetor Float, DLTX - For A, AO, AR, B with Marvel-Schebler Carburetors DLTX13, DLTX67, DLTX71, DLTX72, DLTX73. (Item #: 108459, Ref: AR10068) $32.00

No
Picture
Carburetor Kit - For John Deere tractor models A, B, D, G, For Marvel Schebler carburetor numbers: DLTX5, DLTX6, DLTX8, DLTX10, DLTX11, DLTX13, DLTX15, DLTX16, DLTX17, DLTX18, DLTX19, DLTX24, DLTX31, DLTX33, DLTX34, DLTX38, DLTX39, DLTX41, DLTX51, DLTX53, DLTX63, DLTX67, DLTX71, DLTX72, DLTX73, DLTX107U, DLTX108U, Includes Gaskets, Needle and Seat, (Item #: 100736) $23.80

Carburetor Kit, Basic - Kit for Marvel DLTX18, DLTX38, DLTX41, DLTX53, DLTX71, DLTX72, DLTX19, DLTX24, DLTX39, DLTX51, DLTX10, DLTX34, DLTX67, DLTX73, DLTX3, DLTX63, DLTX6, DLTX31, DLTX8, DLTX11, DLTX13, DLTX5, DLTX16, DLTX15, DLTX17, carbs used on A, B, D, G, GP. (Item #: 133466, Ref: MS104) $31.00

Carburetor Kit, Comprehensive - This comprehensive carburetor rebuild kit is made to service the original Marvel-Schebler design and fits the following tractor models: B. It is being used for carburetors with the numbers matching: DLTX67 and DLTX73. (Item #: 184242, Ref: MS-JD73C) $119.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: DLTX10, DLTX34. For the following tractor models: B. Center-to-Center on the mounting bolts is 3 inches. Add $200.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Item #: 203271, Ref: 1503-CARB) $370.01

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: DLTX67, DLTX73, DLTX107U. For the following tractor models: B serial number 201000 and UP. Add $200.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203272, Ref: 1504-CARB) $370.01

Carburetor Repair Kit - Basic carburetor repair kit contains needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture number DLTX10, AB237R. For model B. (Item #: 112437, Ref: BK36) $30.00

Carburetor Repair Kit - Basic carburetor repair kit contains needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture number DLTX34, AB2711R. For B (Item #: 112437, Ref: BK37) $30.00

Carburetor Repair Kit - Basic carburetor repair kit contains needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture numbers: DLTX67, DLTX73, AB3533R, For B (Item #: 112363, Ref: BK37A) $38.00

Carburetor Throttle Lever - For tractor models: A, B, G. Fits Marvel Schebler carbs DLTX8, DLTX18, DLTX24, DLTX33, DLTX34, DLTX51, DLTX53. Replaces AR10026R. (Item #: 182805, Ref: AR10023R) $39.00

Choke Knob - For tractor models A, B, D, G, H, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Item #: 109932, Ref: B1951R) $11.00

No
Picture
Choke Rod - For Model: B from s/n 258520 and up. (Item #: 179116, Ref: B2819R) $31.30

Fuel Cap - Unstyled (no lettering), 2-11/16" I.D. x 5/8" Height. For tractor models A, B, D, G (Item #: 126515, Ref: AD709) $12.00

Fuel Cap, Vented - For tractor models A, B, G, H, 50, 60, 70, Says Buy Clean Fuel, Keep it Clean . 2 notch cap for a 2 inch tank inlet. Replaces AD709R (Item #: 107951, Ref: 23995DA) $12.50

Fuel Control Rod - For tractor models: (A hand start from s/n 477000 to 497589), (B hand start from s/n 60000 to 94493). (Item #: 179969, Ref: B1447R) $45.00

No
Picture
Fuel Control Rod - For Model: B electric start from s/n 60000 to 94493. (Item #: 180654, Ref: B1594R) $53.00

Fuel Line - This is the fuel line to the Carburetor used on John Deere B after Serial Number 238796. It replaces AB3888R, AB3888 (Item #: 184505, Ref: AB3888R) $40.00

Rubber Fuel Tank Pad - For John Deere tractor models AO (s/n 272000-later), AR (s/n 272000-later), B (s/n 96000-later), BN (s/n 96000-later), BNH (s/n 96000-later), BW (s/n 96000-later), BWH (s/n 96000-later), G (s/n 13000-later), GH (s/n 13000-later), GN (s/n 13000-later), GW (s/n 13000-later), 60 (Standard s/n 604299), 620 (Orchard), Replaces John Deere OEM number B1825R, 1-1/2" O.D., 1/2" Thick, 1/2" Center Hole, (Item #: 126657) $5.20

Sediment Bowl Assembly - Large Bowl. 1/8 inch pipe thread to fuel line, 3/8 pipe to tank. For tractor models A, B, 60, 620, 70, 720, 730, 80, 820, 830. Fuel Strainer assembly with 2.25 inch bowl. This will replace the AUTOMATIC SHUT OFF assembly with a manual shut off for the late A and B models. Replacement bowl available as part S.65504. (Item #: 105393, Ref: S.61581) $20.00

Sediment Bowl Assembly - Cast top with glass bowl, all fuel style for use with 3-way valve. For tractor models AO, AR, B, BO, BR, D, G, GP, H. (Item #: 118722, Ref: AA499R) $47.00

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010, 4030, 4230. Replaces C1777R. (Item #: 105365, Ref: S.65504) $6.10

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: L885T (Item #: 105364, Ref: 49923D) $3.40

Sediment Bowl Screen - 2" - For John Deere tractor models A (Styled and Unstyled), AI (Unstyled), ANH (Styled and Unstyled), AW (Styled and Unstyled), B (Styled and Unstyled), BN (Styled and Unstyled), BNH (Styled and Unstyled), BO (Unstyled), BR (Unstyled), BW (Styled and Unstyled), BWH (Styled and Unstyled), D (Styled and Unstyled), G (Styled and Unstyled), GH (Styled and Unstyled), GM (Styled), GN (Styled and Unstyled), H (Styled), HNH (Styled), HWH (Styled), 50 (Automatic Shut Off), 60 (Automatic Shut Off), 70, 80 (Pony Start Diesel), 520 (Automatic Shut Off), 530 (Automatic Shut Off), 620 (Automatic Shut Off), 630 (Automatic Shut Off), 720, 730, 820 (Pony Start Diesel), 830 (Pony Start Diesel), 840 (Pony Start Diesel), Compatible with John Deere Combine (s) 55, Replaces John Deere OEM number AA519R, (Item #: 121909) $5.70

Single Induction Early Carburetor Kit - For John Deere tractor models A, B, D, G, For the following Marvel Schebler Carbs only, please check your number; DLTX5, DLTX6, DLTX8, DLTX11, DLTX13, DLTX16, DLTX24, DLTX31, DLTX38, DLTX51, DLTX7, DLTX18, DLTX19, DLTX24, DLTX33, DLTX39, DLTX53, DLTX3, DLTX6, DLTX16, DLTX63, DLTX5, DLTX15, DLTX17, No jets or nozzles, Helps complete your carbuteor rebuild, (Item #: 113675) $36.00

Single Induction Late Carburetor Kit - For John Deere tractor models A, B, 50 (up to sn 5015950), 60 (up to sn 6013899), Replaces John Deere OEM number A258E, AR10075R, R10050R, R10060R, R10078R, 12H64R, 15-223, 21H962R, 21H971R, 21H994R, A765R, R10041R, R10045R, R10049R, R10067R, R10147R, R10151R, R10163R, For Marvel Schebler carbs only DLTX67, DLTX71, DLTX72, DLTX73 - Please check your carb number before ordering, No jets or nozzles, Helps complete your carbuteor rebuild, (Item #: 113674) $39.00

No
Picture
Speed Control Rod - For Model: B hand start s/n 96000 to 200999. (Item #: 179895, Ref: B1923R) $9.20

No
Picture
Speed Control Rod - For Model: B electric start s/n 96000 to 200999. (Item #: 179869, Ref: B1940R) $17.80

Throttle Handle - Throttle handle for John Deere models A (after serial #584000) and B (after serial #201000) (Item #: 179396, Ref: B2536R) $52.00

Throttle Shaft - For John Deere tractor models A, B, 50, 60, Replaces John Deere OEM number AR10058, DLTX67, DLTX71, DLTX72, DLTX73, (Item #: 126748) $19.80

Vent Tube and Radiator Overflow Packing - This packing installs in the nut that is on either end of your vent tube or one end of your radiator overflow tube. It is used on John Deere A, B, D, G, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830. Replaces John Deere Part Number B60R (Item #: 183845, Ref: B60R) $7.50

Gauges

Amp Gauge - This gauge is white face for tractor models A, B, D, G, H. Amp Gauge. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, white faceplate and a black bezel. Replaces OEM #s AM354T, AB2568R, AB1190R. (Item #: 150258, Ref: R3802) $26.00

Amp Gauge - For tractor models A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, black faceplate and a black bezel. Replaces AM1864T, AF2749R. (Item #: 150259, Ref: R3803) $26.60

Oil Gauge Adapter Fitting - This Oil Gauge Adapter Fitting is 1/8 inch NPT female to 3/16 inch tubing female. It is used on some gauges without removable fitting. (Item #: 178157, Ref: 9N18685) $4.90

Oil Pressure Gauge - For tractor models A, B, D, G, UNSTYLED. This gauge has a plain face without a John Deere logo. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. This oil pressure gauge has a metal base, glass lens and a black bezel. This gauge does not have studs and is designed to screw into the governor or oil filter base. This oil pressure gauge is a mechanical gauge. The measurement of the threaded fitting is 1/8 NPT male thread. Replaces OEM #s Replaces: AM737T, AB292R, AA1730R (Item #: 150255, Ref: R3799) $27.00

Oil Pressure Gauge - For tractor models A, B, D, G, STYLED. Oil Pressure Gauge without John Deere logo, on white face. With studs. Replaces AB1549R (Item #: 150254, Ref: R3800) $22.80

Tachometer - This new tachometer fits; A serial number 648000 and up, AO and AR serial number 272000 and up, B serial number 201000 and up, [ 50, 520, 530, 60, 620, 630, 70, 720, 730 (Gas/Lp) ], [ 70, 720, 730 (Diesel) ], [ 80, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Serviceable, Face plate will have the wrong Mph.) ]; Replaces: AB5132R, AB5134R, AF1719R, AF2066R, AF2698R, AR20055R, AR20825, AR20836, AR21661, AR21662, AR21663, AR21663R, AR21664R (Item #: 150247, Ref: R4611) $120.00

Tachometer Bracket - For tractor models 50, (A from SN# 648000 and above), (B from SN# 201000 and above), (AO, AR from SN# 272000 and above), 60. (Item #: 126741, Ref: A4875R) $36.72

Tachometer Cable - For tractor models 50, (A from SN# 648000 and above), (AO, AR from SN# 272000 and above), (B from SN# 201000), G, 60, (70 gas). Replaces AB4765R, AB4776R. (Item #: 101923, Ref: AB4737R) $43.44

Temperature Gauge, AA883R - For John Deere tractor models A (s/n 476999-earlier), B (s/n 166999-earlier), D (s/n 125430-143799), G (s/n 12999-earlier), H, Replaces John Deere OEM number AA883R, AA3538R, Metal Base, Glass Lens, Black Bezel, White Face, Lead Length: 23", (Item #: 150250) $37.00

Temperature Gauge - White Face - For John Deere tractor models A (styled), B (s/n 60000-306600), D (styled), G (styled), M (mid 1952-earlier), R (mid 1952-earlier), Replaces John Deere OEM number AM2444T, AA1342R, AA3534R, AA3535R, Black Bezel, White Face, Lead Length: 48", For temperature gauge with a black face use 150248, (Item #: 150249) $35.00

Water Temperature Gauge - Black face. 72 inch lead. Without John Deere Logo. 140-230. For tractor models A, AR, B, D, G, M, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840. Also replaces AA6295R, AA7263R, AM2444T, AT13849T, AR20783R. (Item #: 150251, Ref: AR490R) $32.00

Water Temperature Gauge - For tractor models A, B, D, G and H. This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 3 foot capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5/8 inch 18 NF end with a 1/2 inch NPT pipe bushing. This gauge has a plain face without a John Deere logo. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. OEM #s AA3538R and AA883R. (Item #: 150256, Ref: R3811) $29.90

Water Temperature Gauge - For tractor models A, B, D, G and H. This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 6 foot capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5/8 inch 18 NF end with a 1/2 inch NPT pipe bushing. This gauge has a plain face without a John Deere logo. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. Replaces OEM #s AM610T, AM1609T and AA1342R. (Item #: 150257, Ref: R3812) $29.00

Hitch / Drawbar

Drawbar Pivot Pin - For tractor models 320, (A from SN# 561903 and above), (B from SN# 186134 and above), 50, 520, 530, 60, (620 up to SN# 13099), 40, 330, 420, 430, (M, MT with swinging drawbar). Replaces B2198R. (Item #: 126345, Ref: AA5365R) $29.01

Evener Bar Upper Link Knuckle - For John Deere tractor models A, B, G, 50, 60, 70, Replaces John Deere OEM number 31583A, (Item #: 126354) $80.00

Power Trol Lever - For John Deere tractor models A (sn:477000-later), AO (sn:272000-later (Styled), AR (sn:272000-later (Styled), B (sn:B60000-later), BN (sn:B60000-later), BNH (sn:B60000-later), BW (sn:B60000-later), BWH (sn:B60000-later), G, GN, GW, Replaces John Deere OEM number AA3744R, (Item #: 109509) $42.87

Sway Chain Assembly - For John Deere tractor models A (With 800 Lift Kit), B (With 800 Lift Kit), G (With 800 Lift Kit), 50 (With 800 Lift Kit), 60 (With 800 Lift Kit), 70 (With 800 Lift Kit), Replaces John Deere OEM number 14779, 31606A, 31602A, 331603A, DA2632A, DA4560A, RV695A, Includes 1 Chain, 1 Large Clevis w/ Drilled Pin and Cotter Pin, 1 Small Clevis w/ Drilled Pin and Cotter Pin, 2 Used Per Tractor., (Item #: 126736) $56.00

Swinging Drawbar - For model B up to SN# 149699. (Item #: 179110, Ref: R4307) $172.00

Hydraulic System

Coupler - For John Deere tractor models A, B, G, M, Replaces John Deere OEM number A3134R, For Locking Nut Style Coupler, 1/2" Pipe Threader, (Item #: 126178) $46.44

Coupler Cover - For John Deere tractor models A (late), B (late), G (late), R, 50, 60, 70, Replaces John Deere OEM number A3255R, A3614R, For Swing Style Couplers, (Item #: 110634) $32.00

Hydraulic Block-Off (Dummy Plug) - Fits all with locking nut style coupler. Measures 0.685 inches outside diameter, 5.377 inches overall length, For locking nut style coupler. Note: Fits PowerTrol SN # PCV-100 to 67904. Only fits early serial numbers. Later serial numbers use AA4321R. This part replaces AA3762R, AA4980R (Item #: 178584, Ref: AA3762R) $57.14

Hydraulic Block Off Plug (Dummy Plug) - Used on Swinging style lever Powr-Trol Serial number PCV-67905 and up. This part has 1/2 inch pipe thread. This part replaces John Deere part numbers AA4981R, AA4321R (Item #: 178972, Ref: AA4321R) $48.00

Hydraulic Coupler - For John Deere tractor models A, ANH, AO, AR, AW, B, BN, BNH, BW, BWH, G, GH, GM, GN, GW, MC (s/n 36948-later), 40, 50, 60, 70, 320, 330, 420, 430, 435, 440, 1010 (s/n 42000-earlier), Replaces John Deere OEM number A3613R, AA5535R, Powr-Trol s/n PCV67905-later, Swing style lever coupler, Thread: 1/2" Pipe, (Item #: 126179) $45.65

Hydraulic Coupler and Cover - For John Deere tractor models A, ANH, AO, AR, AW, B, BN, BNH, BW, BWH, G, GH, GM, GN, GW, MC (s/n 36948-later), 40, 50, 60, 70, 320, 330, 420, 430, 435, 440, 1010 (s/n 42000-earlier), Replaces John Deere OEM number A3613R, A3614R, AA5535R, Powr-Trol s/n PCV67905-later, Swing style lever coupler, Thread: 1/2" Pipe, Includes: Cover and Coupler, (Item #: 110633) $74.22

Lights

No
Picture
7 Inch Teardrop Light Lens - For A, AO, AR, B, BO, BR, D. 7 Inch Teardrop Light Lens. THIS IS LENS ONLY. Like original has "GUIDE" NAME. (Item #: 150692, Ref: B1725R) $25.80

No
Picture
Bullet Tail Light - For B after SN# 201000 and R. 6 Volt Bullet Tail Light with glass lens. Also available in 12 Volt, order PART R4383 Instead. (Item #: 105309, Ref: R4384) $51.00

Bullet Tail Light-12 Volt - This Bullet style Tail Light is for models B, C, CA, G, WD, WD45, D10, D12, D14, D15. Bullet Tail Light. 12 Volt with Glass Lense. 3 1/2 inches long. Also available in 6 volt, order part number R4384 instead. (Item #: 105310, Ref: R4383) $52.00

Dash Light - 6 Volt - For JD B, BR, D, AR, R, 70D, 80. (Item #: 105318, Ref: AD2835R-6V) $31.00

Headlight - This headlight, sold each, is for models A, AO, AR, B, D, G, H, R, 50, 60, 70. Teardrop Headlight, 12 volt, 5" Diameter. Also replaces AF3816R. (Item #: 105332, Ref: AF710R) $64.00

Headlight, 12 Volt - 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3144R, AD2450R, AD2451R. (Item #: 178399, Ref: AB3145R) $110.00

Headlight, 6 Volt - 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3145R, AD2450R, AD2451R. (Item #: 125712, Ref: AB3144R) $94.00

Headlight Lens - Replacement glass lens is 4.75 inch outside diameter for headlamp assemblies AA3075R, AF3817R. For tractor models A, B, D, R, 70D, 80, 820, 830. (Item #: 111330, Ref: GC200) $13.90

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: ( A, B with sheet metal dash), 70 gas and diesel, 730 gas and diesel, D up to serial number 143800, 720 gas and diesel, 50, 60, 630, AO, AR, H, R, 80, 520, 530, 620, 720, (820, 830 2 cylinder). Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.60

Headlight, Teardrop - Teardrop Headlight - 6 Volt - 5 inch Diameter For tractor models A, AO, AR, B, D, G, H, R, 50, 60, 70. Also replaces OEM# AF3817R. Restoration Quality. (Item #: 105331, Ref: AA3075R) $56.00

Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Item #: 154899, Ref: 504781M1) $5.40

Knob, Light Switch - Work or tail light knob. For tractor models A, B, D, G, R. (Item #: 126172, Ref: AA5332R) $5.98

Lens - Lens, combination front or rear light, for 5 inch diameter lights, for light TP-AA3075R on tractors: A, B, D, G, R, 7 0D, 7 20D, 730D, 80, 820, 830. Manufactured to restoration standards. For 70, 720, 730, 80, 820, 830, A, B, D, G, R Replaces A2731R (Item #: 111330, Ref: GC200) $13.90

Light Bracket, Headlight - For model B from SN# 201000 to 243384. Light Bracket. (Item #: 179850, Ref: B2542R) $48.00

Light Bracket, Headlight - For tractor models A after SN# 584000, B after SN# 243385. Light Bracket. (Item #: 126504, Ref: A3353R) $48.00

No
Picture
Light Bracket, Rear - For tractor models A from SN# 477000 to 5000011. For B from SN# 60000 to 95999. For D after SN# 143800. Rear Light Bracket. (4244R). (Item #: 180695, Ref: B1601R) $98.00

Light Bracket, Rear - For A from SN# 500012 to 583999. For B from SN# 96000 to 200999. For G from SN# 13000 to 25999. Rear Light Bracket. (Item #: 179822, Ref: A2612R) $80.00

Light Lens - For 7 inch Teardrop Lights. For tractor models A, AO, AR, B, BO, BR, D. Replaces: B1725R (Item #: 150692, Ref: R4242) $25.80

Light Switch - Light Switch. Replaces John Deere OEM nos AB2687R, AF687R For A, AI, ANH, AO, AR, AW, B, BN, BNH, BW, BWA, BWH, D (s/n 143800-186751), G, GH, GM, GN, GW, H, HNH, HWH (Item #: 121153, Ref: L5067) $15.00

Light Switch, 3-Position - For tractor models A, B, D, G, H, L, LA. Replaces AB2687R, AF687R, AL2857T. (Item #: 105312, Ref: 70208197) $23.00

Light Switch with Knob - Switch for tractor models A, B, D, G, R. Also replaces AA4982R. (Item #: 114720, Ref: AA4667R) $16.60

Rear Combo Light 12 V - Fits A after SN 584000, [B, R (When converted to 12 volt)], G After SN 26000. Replaces: AB4037R, AB3976R, AB3975R, AA3075R, AA4529R (Item #: 178256, Ref: AA4791R) $97.00

Red Light with Brass Ring - For tractor models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Item #: 150646, Ref: AA925R) $23.10

Ring - Moulding trim ring for headlights or rear lights, for light TP-AA3075R.* Manufactured to restoration standards. For tractor models 70, 720, 730, 80, 820, 830, A, B, D, G, R. (Item #: 124994, Ref: TP-AA3241R) $13.80

Tail Light - For B after SN# 201000, R. 6 volt, 5 inch diameter Tail Light. Used in combination with the Bullet Tail Light. (3866R) Replaces: AB3549R (Item #: 125718, Ref: AB3549R) $78.51

Tail Light, Bullet Shape - For B from SN# 201000 and R. Bullet Tail Light, 6 Volt, with glass lens. (R4384) Replaces: AM1310T, AB3976R, AM1291T (Item #: 105309, Ref: AB3976R) $51.00

Tail Light, Combo Light - For tractor models B after SN# 201000, R. 6V Rear Combo Light, 5". Replaces: AB4037R, AB3976R, AB3975R, AA3075R, AA4529R (Item #: 113257, Ref: AB4037R) $81.00

$John Deere B Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. Replaces: AD1855R, AD2082R, AD2834R, AD2835R, AR1563R, AR20447R, AR26757R, AR33479R, AR35993R, B1728R, RE13195R (Item #: 150699, Ref: TLBULB12V) $0.50

Tail Light, White - For B after SN# 201000, R. 6 volt, 5 inch diameter. Tail Light used in combination with the Bullet Tail Light. (Item #: 113257, Ref: AB3975R) $81.00

Tail Light - with Bullet Tail Light - For A after SN# 584000, G after SN# 26000 12V Tail Light, 5" with Bullet Tail Light. (3864R) AA3075R, AA4529R, AB3975R, AB3976R, AB4037R (Item #: 178256, Ref: AA4529R) $97.00

Miscellaneous

Gear Shift Ball - For John Deere tractor models A (s/n 499000-later), B (s/n 150000-later), H (s/n 10000-later), 50, 60 (s/n 604300-later), 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number H717R, (Item #: 126524) $25.30

Umbrella Bracket Assembly - For tractor models with Battery Box Mounted Seats: 50, A, 60, B, G, 520, 530, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, R. (Item #: 179139, Ref: AA4206R) $87.00

Umbrella Bracket Assembly - For tractor models A, AO, AR, B, BO, BR, D, G, GP, H, L, LA, LI. (Item #: 179958, Ref: F517A) $66.08

Oil System

Engine Oil Pump Strainer - Used on John Deere models: A Serial Number 584000 and up, B Serial Number 201000 and up, 50, 60, 70 gas/LP, 630, 730 gas/LP, 520, 530, 620, 720 gas/LP. (Item #: 164417, Ref: AB3450R) $43.00

Engine Oil Pump Strainer Screen - Used on John Deere: A Serial Number 424025-487999, B up to Serial Number 95999, G, AO Serial Number 251486-259999, AI Serial Number 251486-259999, AR Serial Number 251486-259999, BO, BR. (Item #: 164415, Ref: AB284R) $51.00

Oil Filter - Oil filter element, cartridge type 6-7/16" Tall, 3-1/8" Wide. Does not come with seal or gasket. For tractors: A, B, D Serial number 146500 and up, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030. Replaces AA3680R, AR21777R, AR26350, AR28110R (Item #: 109417, Ref: AR26350) $11.50

Oil Level Indicator - This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3/8 inch NPT male fitting. Dipstick is 4.91 inches long. For model early model A series, B, (late model D, DI, W111, W113), G series, H series, R, 50, 60, 70. Originally used as an aftermarket product in the 1940's. (Item #: 1998TA-New) $46.50

Oil Pump Drive Shaft Coupling - For tractor models A series after sn 424025, B series, G series, 50, 60, 70 gas, 520, 530, 620, 630, 720 gas, 730 gas. (Item #: 182803, Ref: B250R) $27.20

Paint

No
Picture
Paint, Classic Green, 1 Gallon - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102408, Ref: TP215GAL) $60.00

No
Picture
Paint, Classic Green, 1 Quart - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102407, Ref: TP215QT) $23.50

No
Picture
Paint, Classic Green, Spray Can - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP215SP) $9.80

PTO / Driveline

PTO Flipper Guard - (A from SN# 523600) and up, (B from SN# 149700), (G from SN# 43352), 50, 60, 70, (70D with Non-live PTO and Non hydraulics). Replaces: Guard: AA3522R, Pin: F710R, Spring: F711R (Item #: 178326, Ref: AA3522R) $40.00

PTO Flipper Guard Spring - For tractor models (A from SN# 523600) and up, (B from SN# 149700), (G from SN# 43352), 50, 60, 70, 520, 530, 620, 630, 720, 730. (Item #: 115822, Ref: F711R) $7.94

PTO Oil Seal - Fits John Deere - [A, AH, AN, ANH, AW, AWH (Used as a rear PTO oil seal (serial number 488000-UP)], [AO, AR (Used as a rear PTO oil seal serial number 260000 and up)], [B, BN, BNH, BW, BW40, BWH, BWH40 (Used as a rear PTO oil seal serial number 149700 and up)], [BO, BR (Used as a rear PTO oil seal serial number 333100 and up)], [G, GH, GM, GN, GW (Used as a rear PTO oil seal serial number 43352 and up)], [R, 50, 520, 530, 60, 620, 630, 70, 70D, 720, 720D, 730, 730D (used as a rear PTO oil seal)], 2010 (used as a transmission drive shaft seal), [3010, 4010 (Used as a front PTO oil seal)]; Replaces: AA2296R, AT11888, AT11931, AT16076. (Item #: 152182, Ref: 71701C1) $11.60

PTO Seal - This PTO seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. For tractors equipped with PTO shield and flipper guard casting #B1679R. It Fits: A, AN, ANH, AW, AWH (Up to Serial Number 487999), AO, AR (Serial Number 258330 - 259999), B, BN, BNH, BW, BWH (Up to Serial Number: 149699), BO, BR (Serial Number 331077 - 333099). Replaces: AB2578R, 476838 (Item #: 153586, Ref: AB2578R) $14.00

PTO Shaft Oil Seal Housing - Used on John Deere A up to Serial Number 487999 and John Deere B up to Serial Number 149699. This is a new part, made just like the original. Uses AB2578R seal, not included. (Item #: 125634, Ref: B1679R) $154.00

PTO Shield - For A, B, G, LA. For EARLY 50, 60, 70, all with Live PTO and Powr-Trol. PTO Shield replaces #AA2297R. (Item #: 109984, Ref: R4403) $85.65

Seats

Arm Rests - Pair - Black Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 178435, Ref: R1190) $106.00

Arm Rests, Pair - Yellow Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 110196, Ref: R1188) $108.00

Backrest, Black - Superior, weatherproofed covers, material identical to cushions. Tee-nuts and cap screws included for easy installation. Holes are pre-set and drilled. Black. For tractor models A, B, G, 50, 60, 70, 520, 620, 720, 730, 820, 830 series (Replaces AR21965R) (19-1/2x5-1/4). (Item #: 101303, Ref: JT300B) $52.00

Pan Seat - This tractor seat is 19 inches wide with nine holes. For A, B, D, G, H, L. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Item #: 101352, Ref: 8N400) $46.00

Seat Back - Yellow, wood back. 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. Picture shows seat bottom. Not included in price. Order P/N R0172 if needed. (Item #: 110194, Ref: R0173) $78.00

No
Picture
Seat Back - Yellow, wood, 9 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 179186, Ref: R0993) $62.00

Seat Back - Black, wood, 6 inches high. For tractor models A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. 16.5 inch bolt spacing. (Item #: 116170, Ref: 363219R91-1) $38.00

Seat Bottom - Yellow, wood back. 4" foam cushion. 19-1/2" x 14-1/2". For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840. (Item #: 101300, Ref: R0172) $62.00

Seat Bottom - Black, wood, 19 1/2 inches x 14 3/4 inches. Four inche thickness For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. AB4035R, AR30180, AR28301. (Item #: 116729, Ref: R0863) $78.00

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Sheet Metal / Body Parts

Battery Base - Use with R1521 and R1522 For B (From S# 201000), R, 80, 820, 830 with Pony Motor. Replaces OEM# AR1326R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126477, Ref: R3285) $68.00

Battery Box - This battery box is for a model B with Serial Number 201000 and up, or model R With Pony Start. Replaces OEM# AB3593R, AB4101R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104076, Ref: R1521) $243.00

Battery Box - Complete - For model B SN# 96000 to 200999. Includes top and both sides. Replaces: LH: AB2926R, RH: AB2925R, Top B1937R (Item #: 104077, Ref: B1937R) $107.80

Battery Cover - Three Piece Set For model B (S#60000-#95999). Replaces OEM# AB1835R, AB1836R, B1584R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 184907, Ref: R3272) $122.00

Battery Cover - Three Piece Set For model B (With SN# #96000-#200999). Replaces OEM# AB2925R, AB2926R, B1937R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104077, Ref: R3273) $107.80

Clam Shell Fender Bracket Pair - Fits John Deere - A (up to sn 650763), B (up to sn 260983), G (up to sn 41667). Replaces: LH - A4050R, RH A4049R (Item #: 127037, Ref: JDS176) $196.44

Deluxe Hardware Kit - Includes hardware for: Hood, Medallion (aka nose cone), Grills, Center plate, Radiator shutters and Flywheel cover. It is used on John Deere A serial number 648000 and up, B serial number 275242 and up, G serial number 48608 and up. This is a 102 piece set and contains replacements for John Deere part numbers 12H10, 12H291R, 24H1136, A2181, A4126R, A4668R, B1544R, R20817 (Item #: 126198, Ref: JDS3694) $83.65

Fender - Right hand or left hand, fits either side. Clamshell style fender does NOT come with bracket for the following models: A, B, G, 50, 520, 60, 620, 70, 720 Diesel, 630, 730 Diesel. Fender measures 27 3/4 tall and 33 inches wide at tallest and widest dimensions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 108307, Ref: AA4655R) $161.00

Fender Bracket, Left - For A, B and G. Fender Bracket - Left. Additional $5.00 shipping due to weight. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 110027, Ref: A4050R) $87.00

Fender Bracket, Right - For A, B and G. Fender Bracket - Right. Additional $5.00 shipping due to weight. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 110028, Ref: A4049R) $94.00

Fender, LH - For tractor models G, (A styled SN# less than 650763), B, BN, BNH, BW, BWH, GH, GN, GW. Additional $50 shipping due to weight. This item must ship truck freight. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 107035, Ref: AA1583R) $397.00

Fender, RH - For tractor models G, (A styled SN# less than 650763), B, BN, BNH, BW, BWH, GH, GN, GW. Additional $50 shipping due to weight. This item must ship truck freight. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 107034, Ref: AA1582R) $360.00

Flywheel Cover Guard - Used on John Deere B serial number 60000 to 95999, 1939 - 1940 4 Speed. Replaces John Deere part number AB1856R. Fit to your tractor before painting. (Item #: 126486, Ref: AB1856R) $146.00

Flywheel Cover Guard - Like all sheet metal parts, this Flywheel Cover Guard should be fitted to your tractor before painting. This part is used on John Deere B serial numbers 96000-200999. (Item #: 126487, Ref: AB2933R) $146.00

Grill Screen - For one side For B, and H. These ARE PRE-FORMED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112106, Ref: B1420) $62.80

Hood Bolt Kit - For John Deere tractor models A (sn:477000 - 586999), B (sn:60000 - 200999), For electric start, long hood tractors only, For hood, grilles and battery covers, (Item #: 117519) $35.00

Hood Late Unstyled - Long Frame Hood, includes brackets. For model B from SN# 42200 to 59999. (Item #: 179247, Ref: AB1263R) $230.00

Step and Bracket Assembly - For tractor models G, 50, 520, 530, 60, 620, 630, 70, 720, 730, A, B. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104024, Ref: AA6092R) $62.00

Step Pad - For tractor models A, 60, B, 50, G, 520, 530, 620, 630, 70, 720, 730, 80, 820, 830, 2010, 1520, 1530, 2040, 2150, 2155, 2240, 2020, 2510, 2520, 2030, 2440, 3020, 2350, 2355, 2550, 2555, 2750, 2755, 2630, 2640, 4010, 3120, 4020, 2840, 4050, 4000, 4230, 4320, 4520, 4620, 4430, 4240, 4440, 4250, 4255, 5010, 5020, 6030, 8650, 920, 1120, 8850, 2130, 8450, 2120, 1830, 8020. (Item #: 109589, Ref: F3195R) $31.00

Step with Bracket - Fits A, AO, AR, B, BO, BR, G, 50, 60, 70, 520, 530, 620, 630, 720, 730. Replaces OEM# A5234R or F3195R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104024, Ref: R2098) $62.00

Toolbox - For model B from SN# 42200 to 59999. (Item #: 179853, Ref: AB1264R) $53.00

No
Picture
Toolbox - For B (S#200100-#264778). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AB3538R (Item #: 180637, Ref: R4269) $58.00

No
Picture
Toolbox - For B (From S#264779). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 180636, Ref: R4270) $58.00

Steering

Front Axle Housing Lock Bolt - For John Deere tractor models A, B, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2694R, Uses 1" NC Nut, (Item #: 108966) $23.90

Front Axle Housing Lock Bolt, Used - For John Deere tractor models A, B, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester(s) 9900, Replaces John Deere OEM number B2694R, Uses 1" NC Nut, For a new version of this item use Item #: 108966, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408966) $13.61

Pivot Bolster - Replaces AA5765R. For tractor models A, B, G (48-80 inch Tread), 50, 60, 70, 520, 530, 620, 630, 720, 730. (Item #: 112102, Ref: R3060) $567.00

Roll-O-Matic Knuckle - Right Hand, Used - For John Deere tractor models B, 50, 520, 530, Replaces John Deere OEM nos AB3771R, Replaces John Deere Casting nos B2741R, Casting No. B2741R, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497907) $89.01

Spindle - Spindle, LH/RH, Dimension A-14.375 inch, B-1.5 inch, C-1.625 inch, D-1.312 inch. Fits A, AO, AR, B, G, GH, 50, 520, 530, 60, 620, 630, 70, 720 All with Factory Wide Fronts only. The wheel bearing kit used on this spindle is kit part number WBKJD1. (Item #: 102209, Ref: AA5789R) $341.00

Spindle Bushing - Has an inside diameter of 1.504 inches and an outside diameter of 1.753 inches. Two used per spindle. Price shown is for each, sold only in multiples of 2 items. Used on John Deere AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 108046, Ref: A877R) $12.90

Spindle Thrust Washer - This Spindle Trust Washer is used on A (with factory wide fronts only), AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50 (with factory wide fronts only), 520 (with factory wide fronts only), 530 (with factory wide fronts only), 60 (with factory wide fronts only), 620 (with factory wide fronts only), 630 (with factory wide fronts only), 70 (with factory wide fronts only), 720 (with factory wide fronts only), 730 (with factory wide fronts only). 1.500 inch inside diameter, 2.750 inch outside diameter. Two used per spindle. Sold individually. (Item #: 108047, Ref: A890R) $6.50

No
Picture
Steering Arm - For A, B, G, 50, 60, 70, all with round tube wide front axle. Steering Arm - Left. (Item #: 104951, Ref: AB4686R) $232.00

Steering Arm - Left - For A, B, G, 50, 60, 70, all with round tube wide front axle. Steering Arm - Left. Replaces B1236. (Item #: 104951, Ref: AB4686R) $232.00

Steering Arm - Right - For A, B, G, 50, 60, 70, all with round tube wide front axle. Steering Arm - Right. Replaces B1236. (Item #: 104950, Ref: AB4685R) $216.00

Steering Wheel - 16" diameter, 3/4"-7/8" keyed, stepped hub, 3 flat spokes. For tractor models (B unstyled SN# 1000-59999), BR, BO. (Item #: 101436, Ref: S.67522) $49.00

No
Picture
Steering Wheel - 16 inch diameter, 3/4 inch-7/8 inch keyed, 3 steel spokes. Replaces OEM number AA380R. For model (B serial number 96000 to 230043). (Item #: 101436, Ref: S.67521) $49.00

Steering Wheel - For A, B, D, G, R, 50, 60, 70, 80, 520, 620, 630, 720, 730, (820 Diesel (2 CYL) With Power Steering). Steering Wheel 17 5/8" Diameter, 13/16" Keyed Hub. 2447R (Item #: 101444, Ref: AA380R) $46.00

Steering Wheel - For B sn#60000-95999. Steering Wheel, 16" Diameter, Round Spokes, 3/4"-7/8" keyed, Stepped Hub. (Item #: 101438, Ref: AB218R-MID) $43.00

Steering Wheel - For B sn#95999 and up. Steering Wheel, 16" Diameter, Round Spokes, 13/16" Stepped Hub. 3221R (Item #: 101438, Ref: AB218R-LATE) $43.00

Steering Wheel Shaft Bushing - For John Deere tractor models B (s/n 201000-later), BN (s/n 201000-later), BNH (s/n 201000-later), BW (s/n 201000-later), BWH (s/n 201000-later), R, 50, 80, 520, 620, 820, 830, Replaces John Deere OEM number B37R, 1.739" Length, 0.940" Outer Diameter, 0.887" Inner Diameter, (Item #: 126725) $18.80

Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 1.197" Inside Diameter, a 1.700" outside diameter and is 455" Wide. Fits B, BN, BNH, BW, BWH (serial number 60000 and up), (50, 520, 530 with Manual Steering Only) It replaces original part number JD7396 (Item #: 126732, Ref: 70228150) $16.30

Wheels

No
Picture
Bearing Cone - BEARING CONE For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: 2788) $16.70

No
Picture
Bearing Cone - Outer bearing cone. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 50, B, BO, BR (Item #: 172510, Ref: TP-JD7209) $8.30

No
Picture
Bearing Cone - Inner bearing cone. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: TP-JD7222) $16.70

No
Picture
Bearing Cup - Outer bearing cup. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 50, B, BO, BR (Item #: 180095, Ref: TP-JD7259) $6.50

No
Picture
Bearing Cup - BEARING CUP For 50, B, BO, BR (Item #: 180095, Ref: 15250) $6.50

Clamp Lock Nut - 3/4-16 thread, fits front wheel on B, M, MT, 40, 420S, 420T, 1010 and 2010. For 1010, 2010, 40, 420S, 420T, B, M, MT (Item #: 111996, Ref: LN10-2) $21.00

Front Rim 3 x 15 - 6 hole Front Wheel Rim. 4 9/16 inch pilot hole, 3 inch spacing on the 6 holes. Back spacing 3.25 inch. Verify back spacing before ordering. (Item #: 178388, Ref: W3X15-6) $165.00

Front Wheel Hub Cap, Used - For John Deere tractor models A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 940, 950, 970, 990, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1550, 1630, 1640, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2950, 2955, 3010, 3020, 3030, 3040, 3120, 3130 (after s/n 186270), 3140, 4000 (after s/n 201000), 4010, 4020 (after s/n 201000), 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010, 5020, 6030, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6410L, 6410S, 6420, 6500, 6510, 6520, Replaces John Deere OEM number A1555R, 3 bolt cap, Aluminum Cap, For a new version of this item use Item #: 102235, (Item #: 402235) $5.01

Front Wheel Hub Cap, Used - For John Deere tractor models B, 50, 520, 530, Replaces John Deere OEM nos B920R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498048) $3.01

Front Wheel Hub Cap, Used - For John Deere tractor models A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number A1555R, 3 bolt cap, Cast Cap, For a new version of this item use Item #: 102235, (Item #: 496607) $5.01

Rear Rim - 10 x 38 without Drive Lug For A, B, GA, B, G (Item #: 178332, Ref: R2070) $594.00

Rear Rim - 10 x 38 with Drive Lug For A, B, GA, B, G (Item #: 178331, Ref: R2509) $565.00

No
Picture
Rear Rim - 11 x 38 without Drive Lug For A, B, GA, B, G (Item #: 180737, Ref: R2071) $651.00

No
Picture
Rear Rim - 11 x 38 with Drive Lug For A, B, GA, B, G (Item #: 180736, Ref: R2510) $653.00

No
Picture
Rear Rim - 14 x 38 without Drive Lug For A, B, GA, B, G (Item #: 178336, Ref: R2072) $743.00

No
Picture
Rear Rim - 14 x 38 with Drive Lug For A, B, GA, B, G (Item #: 178335, Ref: R2511) $765.00

No
Picture
Retainer - Retainer. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 180109, Ref: TP-B89R) $27.40

Rim Clamp, Used - For John Deere tractor models A (s/n 477000-later), AO (s/n 014800-later), AR (s/n 014800-later), B, BN, BNH, BW, BWH, G, GH, GN, GW, R, 60, 70 (s/n 014800-later), 80, 600, 620, 630, 720, 730, 820, 830, 2010, 3010, 3020, 3030, 3120, 3130, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 55 (s/n 12051-39349), 105, 6602, 6622, Replaces John Deere OEM nos B634R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497223) $6.01

Spindle Dust Shield - For John Deere tractor models A, AO, B, BN, BNH, BWH, G, GH, GN, GW, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2693R, 4020KR, Used with AR50962 and AR50963 knees, (Item #: 110385) $12.80

No
Picture
Wheel Bearing Kit - For A, B, D, G, 50, 520, 60, 620, 70, 720, 730, (AO, AR, GH, 530, 630, all with Factory Wide Fronts ONLY). Wheel Bearing Kit for 1 Wheel. Kit contains 1 each of the following p/n 3383, 3320, 2785, 2720, D636R; which cross to the numbers JD7270, JD7224, JD7266, JD7216, D636R. (Item #: 102226, Ref: WBKJD1) $94.00

Wheel Hub, Used - For John Deere tractor model B, Replaces John Deere OEM nos AB1022R, Marked B918R, 6 Bolt Hub, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498204) $55.01

Wheel Hub, Used - For John Deere tractor models A (s/n 584000-later), B (s/n 201000-later), G, 50, 60, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM nos AA4099R, Marked A3479R, 6 Bolt Hub, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498235) $65.01

Wheel Hub, Used - For John Deere tractor models B (s/n 200999-earlier), 50, 520, 530, Replaces John Deere OEM nos AB3080R, Marked B2015R, 6 Bolt Hub, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498203) $55.01

Wheel Hub, Used - For John Deere tractor models B (s/n 60000-later), 50, 520, 530, Replaces John Deere OEM nos AB3773R, Replaces Casting nos B2719R, 6 Bolt, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498238) $60.01

Wheel Hub, Used - For John Deere tractor model B, Replaces John Deere OEM nos AB3531R, Marked B2379R, 6 Bolt Hub, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498233) $55.01

Wheel Hub, Used - For John Deere tractor models A (s/n 445325-later), B (s/n 29631-later), G (s/n 20277-earlier), Replaces John Deere OEM nos AA1399R, Replaces Casting nos A1553R, 6 bolt hub, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498239) $60.01

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A, For the following tractors: A, B, G, M, 50, 60, 70, 630, 730, MI, MT, 320, H, R, 40, 80, 330, 420, 430, 520, 530, 620, 720, 820, 830, 1010, 1020, 1520, 2010, 2020, 2030, 3010, BW, BWH (Item #: 111560, Ref: 512581M1) $1.70

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $365.01

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $100.55

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.90

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $15.10

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $42.00

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $42.00

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $24.40

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $84.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.10

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $53.00

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $57.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $24.70

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.50

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.50

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $15.80

$John Deere B Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $15.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.60

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $76.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $103.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $123.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $167.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $147.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $170.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $89.00

$John Deere B Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.20

$John Deere B Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere B Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.70

$John Deere B Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $4.58

$John Deere B Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.30

$John Deere B Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.90

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.70

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $14.30

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.10

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $9.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.10

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.40

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $14.30

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $18.38

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $7.40

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$John Deere B Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.90

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $59.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $41.00

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $15.20

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.90

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.90

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.30

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $242.80

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $242.80

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $123.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $39.00

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $50.00

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $54.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $94.00

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $114.00

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $92.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $135.00

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $53.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $21.50

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $379.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $118.70

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $69.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $29.50

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $56.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $23.60

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.50

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.50

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $76.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $29.50

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $9.80

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $42.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.40

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $59.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $23.30

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $7.60

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $62.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $23.50

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $18.20

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $7.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $47.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $176.91

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $282.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $52.00

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $46.00

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $53.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $9.50

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $178.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $410.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $13.30

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $49.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $24.30

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $305.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $100.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $70.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $112.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $17.50

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $56.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $63.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $66.00