Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 820 Tractor Parts

[ Show Pictures ]

[Categories]   [All John Deere Models]   [Print]  


Brakes
Brake Lining - Set of 4 Shoe Linings with 40 rivets. For tractor models 720, 730, 80, 820, 830 all except hi-crop. (Part No: AF2866R)
$39.24

Brake Plate - 12 teeth, 12.00" O.D.. For tractor models 1020, 1520, 1530, 2020, 2030, (2040 SN# up to 305839), (210C SN# 747742 and up), (2240 SN# up to 305313), (2440 SN# up to 340999), 300B, 820, 830. Replaces AT26290, AT22034. (Part No: AT63106)
$126.33

Brake Plate - 12.044" O.D., 8.663" I.D.. For tractor models 820, 830, 1020, 1520, 1530, 2020, (2030 SN# up to 187300), (2040 SN# up to 305839), (2240 SN# up to 305313). T38063, T46728. (Part No: L31016)
$122.02

Brake Shaft Seal - Used as a brake shaft seal. The width of the seal measures 0.350 inch, 1.750 inches I.D., and an O.D. of 2.254 inches. Replaces AR1587, AR1587R. For the following 2 cylinder tractors: 820, 830. (Part No: 195503M1)
$3.96

Brake Shoe Spring - Fits John Deere - 820 2 cylinder, 830 2 cylinder (GAS), 830 2 cylinder (DSL), A, G, R, 60, 70, 80, 520, 530, 620, 630, 720, 730; Replaces: R21753, R21753R, A348R (Part No: R21753)
$4.28

Brake Shoes, Set of 2 - This is a Riveted Brake Shoe Assembly (2-piece set). 1 Pair is for 1 wheel only. Two sets required per tractor. Overall outer curved length: 12-1/4 inches, Lining length: 11-5/8 inches, Width: 2-1/4 inches, Used one 730 both gas, LP, diesel Row-Crop and Standard, 720 both gas, LP, diesel, Row-Crop and Standard, 820 2 cylinder, 830 2 cylinder, 840. Replaces John Deere part number AF2789R. (Part No: AF2789R)
$104.88

Check Valve - New check valve assembly with seat, pin, and spring. For tractor models 4425, 4435, 1020, 1120, 2020, 2040, 2120, (2240 SN# 350000 and up), (2440 SN# 341000 and up), 2840, 2940, 3120, 820, 830, 920. Replaces AL23836, AL67574, AL69179, AL70242 (Part No: AL23836)
$20.68

Clutch
Clutch Disc, 9.875", Organic, Rigid - For tractor models 300, 301, (301A SN# up to 308561 without PTO, without Reverser), 302, 1020, 1030, (2040 SN# up to 349999), 820, 830, 920. (Part No: RE29882)
$107.78

Clutch Disc with Lining - The measurements on this disc are 9.250 inches outside diameter, 0.372 inches thick, 3 5/8" diameter holes to slide over the R1869R pins. When assembling, the discs slide OVER the pins NOT the T-bolts. Used on John Deere R, 80, 820, 830 and 840 2 cylinder tractors. 2 or 3 are used depending on the model. Replaces John Deere part numbers AR1052R, AR403R, RE29785 (Part No: RE29785)
$90.39

Clutch Facing - For tractor models 80, 820, 830. (Part No: R256R)
$29.40

Clutch Fork - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2630, 2640, 2840, 300, 300B, 301, 301A, 302, 302A, 3030, 3120, 3130, 400, 401, 401B, 401C, 655, 655B, 750, 750B, 755, 755A, 755B, 820, 830, 850, 850B, 855, 920, 930, 940. (Part No: T21999)
$84.18

Clutch Handle Bushing - Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Part No: A1197R)
$7.49

Clutch Handle Pivot Bolt - The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1/4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Part No: D2031R)
$13.75

Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models 80, (820, 830 2-cyl). (Part No: R1859R)
$53.16

Clutch Release Bearing and Hub - This Clutch Release Bearing and Hub is used on 820, 920, 1020, 1120, 2020, 2120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 2040, 2240, 2840 Replaces AL27231 (Part No: AL27231)
$75.69

Clutch Shaft - 15/16 spline, 23.125" long. For tractor models 1020, 1030, 1120, 1130, 1140, 1350, 1520, (1530 SN# 178601 to 179600), 1550, 1630, 1750, 1830, 1850, 2020, (2030 up to SN# 187300), 2120, 2130, 2150, 2155, 2350, 2355, 820, 830, 840, 940, 1040. (Part No: T30791)
$155.90

Pressure Plate, 11 - For tractor models 300, 300B, 301, 301A, 302, 302S, 400, 401, 401B, 401C, 401D, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1750V, 1850, 1850V, 1950, 1950N, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2450F, 2630, 2640. Replaces AL18714, AL39624, AL55140, AL18714-R, 1L30151, AL40882, AL55140-R, AT25482, R18714, R25109, R25109-1, R27706, R55140, T25109-R, T27706-R, VPG1079, 228002323, 228002310, SW01215, TP-T27706. (Part No: AL120022)
$416.57

Cooling System
Fan, 4 Blade - Fan is 16.00" diameter with 1-1/2" pilot hole, mounting holes on 1-3/4" centers. For tractor models 1020, 1520, 2040, 2240, 820, 830, JD300, JD350, JD350B. (Part No: AT23180)
$53.50

Radiator - For John Deere 300 without Reverser, (301, 1020 both without Reverser or Hi-Lo Shift), (1120, 820, 920 all with serial number up to 75429). Radiator, complete. Core size: 17.062 inches High, 18.5 inches Wide. (Part No: AT20797)
$385.96

Radiator - Core (the fin part) measures 13.6 in wide x 17.2 High. For 1020 (with hi-lo shift or reverser), 1030, 1120 (serial # 75430 & up), 1530, 2040 & 2240 (serial # up to 349999), 820, 830, 920 (serial # 75430 & up), 930. This radiator uses cap part number AT29054 and is not included. (Part No: AT20849)
$270.29

Radiator Cap - For tractor models 50 SN# 5016616 and later, 60 Regular SN# 6030927 and later, 60 Standard SN# 6043000 and later, 70, 70 Diesel, 80, 420, 430, 435, 440, 520, 530, 620, 630, 720, 720D, 730, 730D, 820, 830, 840, 1010, 8020. Replaces AA5757R. Cap is 3 1/4 outside diameter, fitted for a 2 notch 2 1/4 inch radiator neck. (Part No: 400065)
$21.75

Radiator Core - Diesel - This radiator core is made of copper fins and a brass lockseam tube. The radiator core is 21.5 inches tall, 19 inches wide, 2 inches thick, and has a plate width of 5.562". This radiator core fits John Deere Tractor models 70, 720, 730, 80, 820, 830 all with Diesel engines. Does not come with gaskets. Radiator Gasket available as part number F661R. (Part No: AR1627R)
$364.80

Radiator Gasket Pair - Price is for 2 radiator core gaskets for models G, 70, 720, 730, 80, 820, 830. (Part No: F661R)
$10.50

Radiator Hose, Lower - This lower radiator hose measures 1.875 inside diameter. For models tractor models 1010-D, 1020-D, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1630, (All early 1550, 1750, 1830, 2020-D, 2030-D, 2040U, 2120, 2130, 2150, early 2155, 2240, 2255, 2440, 2630, 2640, 301A, 820 3 cyl, 830 3 cyl, 840, 920, 930, 940, (Industrial - 300, 300B, 301, 302, 310, 380, 400, 401, 410, 480), (Skidder - 24, 440, 440A, 440B) (Part No: T22500)
$10.62

Radiator Hose, Upper - This upper radiator hose measures 1 1/2 inch inside diameter. For models tractor models 1010 Diesel, 1020 Diesel, 1030, 1120, 1130, 1530, 1630, 2040U early, 2240 early, 820 3 cyl, 830 3 cyl, 920, 930. Replaces U16915, T23534 (Part No: T23534)
$9.17

Thermostat Housing Cover - For tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, (2040, 2240 SN# 349999 and below), 2120, (2440 SN# 305414 and below), 2630, 2640, 300, (300B, 301A, 302, 302A SN# 345266 and below), 301, 400, 401, (401B SN# 468294 and below), (401C SN# 305414 and below), 820, 830, 920, 930. (Part No: T23620)
$25.82

Transmission Oil Cooler - This Transmission Oil Cooler is used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400 where an Oil Cooler is used. It replaces original part numbers AR69398, AT165535, AT169229, AT77459 (Part No: AT20848)
$324.65

Water Pump - Water pump with 1 groove, cast 5-inch diameter pulley. For diesel models: 820, 830, 1020, 1030, 1520, 2020, 2030, 2040, 2240 (prior to SN# 349999), 2440. Replaces John Deere casting numbers R51039, R55758. (Part No: TP-AT27018)
$256.45

Water Pump - For 820 and 830 2 cylinders, 80, 840. Comes with Pulley and Gasket. Replaces: AR1194R, Housing casting #: R1523R, Pulley casting #: R1526R, R1527R. Replaces AR1194R-R, AR1194R (Part No: R1527R)
$109.45

Water Pump - For 80D, 820, 830, all 2 cylinder Diesels. NEW Water Pump replaces casting #R1523R. Comes with gasket and pulley. (Part No: AR1194R-R)
$113.81

Water Pump Impellor - For tractor models 1020, 1120, 1520, 1530, 1640, 2020, 2040, 2040S, 2120, 2440, 2510, 2630, 2640, 3300, 5105, 5205, 5210, 5220, 5310, 5310N, 5320, 5320N, 820, 830, 8875, 920, (2240 SN# 350000 and up), (2140 SN# 430000 and up). (Part No: T30897)
$14.08

Water Pump Pulley - This Water Pump Pulley is for tractor models 820, 830, 1020, 1520, 2020, 2030, 2510, 2520, 210C, 290D, 300B, 301A, 302, 302A, 310A, 310B, 350, 350B, 350C, 350D, 400G, 401B, 401C, 401D, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 480C, 482C, JD380, JD401, JD480, JD480A, JD480B. Replaces T30721. (Part No: T23628)
$90.65

Decals and Emblems
Be Careful Plate - This plate is used on A, AN, (AW serial number 584000 and up), B, BN, (BW serial number 201000 and up), G, GM, (GN serial number 26000 and up), GW, R, 50, 520, 60, 620, 70, 720, 80, 820 2 cylinder. (Part No: R4473)
$11.24

Decal Set - Decal Set for John Deere Model 820(2-cyl) Diesel, 15pc. (Part No: JD820D)
$32.82

Decal Set - Hood only set for John Deere Model 820(3-cyl) Diesel. (Part No: R3741)
$25.50

Front Medallion - Front Medallion for models 320, 420, 520, 620, 720, (820 2 cylinder). Medallion measures 4 1/2 inches wide, 3 1/4 inches tall. Does NOT come with retainers (Part No: AF3166R)
$101.12

Drive Train
Bevel Gear, Differential - 18 teeth. For tractor models JD300, JD301, JD310, JD380, JD400, JD401, JD480, 1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 302, 3300, 410, 820, 830, 840, 920, 1030, 1040, 210C, 2140, 300B, 301A, 302A, 310A, 310B, 310C, 315C, 401B, 401C, 401D, 410B, 410C. (Part No: T29394)
$76.59

Clutch Shaft - Shaft is 20 in. long. For tractor models 1030, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2120, 2150, 2155, 2350, 2355, 820, 830, 840, 920, 940, 1040. (Part No: T22219)
$288.42

Countershaft Gear, Transmission - 16/12/12 spline, 4.020" long. For tractor models (1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440 SN# up to 340999 less hi-lo shift), 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2120, 2150, (2155, 2355, 2555 less reverser), 2250, 2255, 2350, 2450, 2550, 820, 830, 840, 920, 940, 1040. (Part No: T24728)
$238.45

Differential - For 820, 830, 1530, 2030, 2040, 2240, 2150, 2350, 2550, 2155, 2355, 2555, 300B. Differential with 1/2" holes. For Differential with 7/16" holes, use Part #S.61553. (Part No: S.61784)
$940.35

Differential - For 820, 830, 1530, 2030, 2040, 2240, 2150, 2350, 2550, 2155, 2355, 2555, 300B. Differential with 7/16" holes. For Differential with 1/2" holes, use Part #S.61784. (Part No: S.61553)
$940.35

Differential Assembly - Used on John Deere models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2040, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. This assembly has 7/16 inch rivet holes and 1 9/16 inch Axle gear inside diameter. The Left Hand bearing surface of 2 1/16 inches OD and Right Hand bearing surface of 2 11/16 inches OD. Verify measurements before ordering. Many of the models listed had more than on assembly with different measurements. (Part No: JDDIFF001)
$822.59

Differential Assembly - Used on John Deere models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2040, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. This assembly has 1/2 inch rivet holes and 1 9/16 inch Axle gear inside diameter. The Left Hand bearing surface of 2 1/16 inches OD and Right Hand bearing surface of 2 11/16 inches OD. Verify measurements before ordering. Many of the models listed had more than on assembly with different measurements. This assembly contains R51500, T30253, L29227, L29226, T29394, T21430 (Part No: JDDIFF002)
$822.60

Differential Housing - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1641F, (1640, 1840, 2040 SN# up to 410063), 2020, 2030, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2630, (300B SN# 195279 and up), (302A SN# 194773 and up), 401B, 401C, 410, 820, 830, 920, 930, 940, JD310, JD380, JD400, JD401, JD480, JD480B. (Part No: T30253)
$331.53

Differential Housing - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310, 410. Replaces R51500 (Part No: R51500)
$269.43

Gear (3RD & 7TH) - 31/20 tooth, 1.375 inch I.D. 4.750 O.D. For JD 1641F, 2020, 2030, 2040, 2120, 2440, 2630, 2640, 820, 920, 2240 SN# 350000> tractors. (Part No: AT30053)
$181.28

Gear (4TH & 8TH) - 20/27 tooth, 4.075 inch O.D., 1.875 inch I.D. For JD 1520, 1530, 2020, 2030, 2040, 2240, 2440, 820, 830, (2155, 2355 All SN# <756483) tractors. (Part No: T21977)
$155.03

Gear Shift Knob - Plastic knob, 3/8 inch fine thread. For tractor models (A styled from serial number 648000), AR, AO, (B styled from serial number 201000), (G styled from serial number 13000), 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, (820, 830 2-cylinder). (Part No: 03501AB)
$7.50

Gear Shift Lever - Used on John Deere models: 1020, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1130, 1520, 1530, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1830, 2020, 2030, 2030OU, 2035EF, 2120, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 820, 830, 920, 930, 930VU. This part replace John Deere part numbers R53817, T22809 (Part No: R53817)
$29.71

Gear Shift Lever, Straight - For tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1830, 2020, 2030, 2120, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750. Knobs available, for BLACK order S.00641, for RED order S.72358, please specify in comments section if needed. (Part No: AL32791)
$27.45

Gear Shift Lever Washer And Snap Ring Kit - Retains the gear shift lever into the housing. Measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. L, LA, LI, M, MC, MI, MT, MTN, MTW, 1010, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 210C, 2120, 2130, 2135, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855, 2940, 2941, 2950, 2951, 2955, 300B, 300D, 301A, 302A, 3030, 3040, 3050, 310A, 310B, 310C, 310D, 3120, 3130, 3135, 3140, 3141, 3150, 315C, 315CH, 315D, 320, 330, 3340, 3350, 3351, 350B, 350C, 350D, 355D, 3641, 3651, 40, 401B, 401C, 401D, 410B, 410C, 410D, 415B, 420, 430, 435, 440, 480A, 480B, 480C, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, [820 3 cylinder, 830 3 cylinder, 840 (3 cylinder)], 920, 930, 940, 940V, Industrial: 300, 301, 302, 310, 350, 380, 400, 401, 410, 480. Replaces: L4027, L4035. (Part No: 70202875)
$13.95

Oil Pump, Transmission - Transmission Oil Pump Casting # R39244 or R57959, used only with dual speed PTOs. For tractor models 1020, 1030, 1120, 1130, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2135, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 300B, 301A, 302, 302A, 401B, 401C, 401D, 820, 830, 840, JD300, JD301, JD380, JD400, JD401, JD480, JD480A, JD480B. Replaces AR39107. (Part No: AR96662)
$310.15

Oil Seal - Seal. For tractor models 820 Mannheim prior to serial number 042924~ 830 Mannheim with T25809 hub~ 1020 and 1520 except Heavy Duty axle on Hi-Crop and Row Crop~ 2010 except low profile Row Crop, 2020~ 2030 except Heavy Duty axle, 2040 with T25809 hub, 2240, For 1020, 1520, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830 (Part No: TP-AT10344)
$12.01

Pinion Gear, Planetary - 18 teeth, 1.759" wide. For tractor models 1020, 1120, 1130, 1140, (1350 SN# 627639 and up), 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 1950N, 2020, 2030, 2040, 210C, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, (2440 SN# up to 340999), 2450, 2550, 2555, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 401B, 401C, 401D, 410, 480C, 482C, 820, 920, JD300, JD301, JD310, JD380, JD400, JD401, JD480. (Part No: T21547)
$105.86

Planetary Drive Shaft, RH - 12 Tooth, 23 Spline, 6.940 inch long. For JD 1020, 1530, 2020, 2030, 2440, (310A, 410 All IND SN# <-371556), 820, 830, 930, 940, 300, 310, 400, 480 tractors (Part No: T28907)
$131.98

Shift Collar - 20 spline. For tractor models 1052, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2120, 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 840, 920, (2040, 2240 SN# 350000 and up). (Part No: L29283)
$61.16

Shift Collar Carrier - For tractor models 1020, 1030, 1120, 1130, 1630, (1640, 2040S, 2140 SN# 430000 and up), 1641F, 1830, 2020, 2030, (2040, 2240SN# 350000 and up), 2120, 2130, 2150, (2155 SN# up to 765146), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 820, 830, 920, 930. (Part No: L29284)
$77.39

Shift Lever - For tractor models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, (820 SN# up to 024012) (Part No: AT20093)
$56.44

Spider Gear, Differential - 11 teeth. For tractor models 1020, 2020, 2030, 2040, 2855, 840, 1030, 1040, 1120, 1130, 1530, 1630, 1640, 1830, 1840, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 3030, 3040, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3640, 820, 830, 920, 930, 940. Replaces L113016, L29227 (Part No: L29227)
$46.91

Transmission Countershaft - Splined Shaft is 11.69 in long, has 37 tooth gear. Fits 1020, 1030, 1120, 1130, 140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 2020, 2120, 2150, 2240, 2255, 2350, 2550, 820, 830, 920, 940. (Part No: T24726)
$338.98

Transmission Countershaft Low Range Gear - 20/22 Tooth, 3.425 O.D., 1.900 I.D. For JD 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 820, 830 (2155, 2355, 2355N, 2555 All SN# <756483) tractors. (Part No: T30065)
$145.09

Transmission Drive Shaft - For tractor models (1020, 1520, 1530, 2020, 2030, 2040, 2240, 820, 830 alll with collar shift transmission), (2155, 2355, 2555 up to SN# 756483 with collar shift trans). (Part No: T21980)
$433.18

Transmission Filter - Transmission oil filter. Filter element, cartridge type. Replaces AR28271, AR75601. For tractor models 2510, 3010, 4010, 5010, 80, 820, 1020, 1120, 1520, 2020, 2120, 2520, 3020, 4020, 4320, 4520, 4620, 5020, 7020, 7520, 830, 840, 1530, 2030, 2630, 4030, 4230, 4430, 4630, 6030, 8430, 8630, 2040, 2240, 2640, 2940, 2150, 2350, 2450, 2550. (Part No: AR75603)
$8.73

Transmission Oil Pump Gears - Includes 2 gears only. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1830, 2020, 2030, (2040, 2240 SN# up to 349999), 2120, 2130, 820, 830, 840, 940. (Part No: AR39164)
$124.23

Electrical System
Alternator - 12 volt, 35 amp. For tractor models 925, 930VU, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 940, (940 1980-84), 940V, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1040, (1130 1970-84), 1140F, 1140V, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1640, 1640F, (1830 1973-82), 1840, 1840F, (2020 1970-79), 2030, 2030OU, 2035, 2035EF, (2040 1976-82 with 164 dsl & 1979-85 with 152 dsl), 2040F, 2040S, (2120 1970-79), 2130, 2135, 2140, (2750 1983-86 with 239 dsl), (2840 1977-79 with 329 dsl), (2940 1980-84 with 359 dsl), (2950 1983-86 with 359 dsl), (3030 1979-82), 3130, 3135, 3140, (820 1968-72 with 3 cyl eng. & internal reg.), (830 1972-75 with 3 cyl), (920 1970-75), (930 1972-79), (1530 1974-75), (2150 1982-87 with 179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 179 dsl), (2350 1983-86 with 239 dsl). Replaces 0120339512, 0120339545. (Part No: ABO0208)
$162.57

Alternator - 12 volt, 35 amp. For tractor models (1020 1972-75 with 2.7L dsl), (1030 1970-82 with 2.7L dsl), (1120 1970-82), 1530, (1830 1973-82), (2020, 2030 1970-79), 2040, (2120 1970-79), (2130 1970-79), (2840 1977-79 with 329 dsl), (3120 1970-77), (820 1968-72 with 3 cyl eng), (920 1970-75 with external regulator), (2030 1971-75 with 219 gas/dsl), (2040 1972-79 with 152 dsl), (2940 1980-84 with 359 dsl). Replaces 0120300562, 0120300535. (Part No: ABO0223)
$110.31

Battery Cable - Battery Cables. 820 & 830 Mannhiem, 2020 & 2240 with swing batt. 1020, 1520 & 2020 with 41 & 71 amp. batt. 4 guage, length 25, terminal type 2-3+. For 1020, 1520, 2020, 2240, 820, 830 (Part No: TP-T21887)
$18.51

Battery Door - For 820 (3 Cyl), 830 (3 Cyl), 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (Part No: R2677)
$43.23

Battery Strap - Battery Ground Straps. A to SN# 676000/up, B SN# 286910/up, G SN# 51143/up, R, 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 830, 5010. 1 guage, length 6-1/2, terminal type Std+. For 50, 5010, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, B, G, R (Part No: TP-AB4100R)
$9.89

Combination Switch - Fits John Deere - 70, 720 (Diesel Pony start), 80, 820 2 cylinder (with Pony Start) Replaces: AF2065R, AF2460R (Part No: AF2065R)
$72.17

Distributor - Wico B-4 - For tractor models 70, 720, 730, 80, 820, 830 FOR PONY STARTING MOTOR ENGINE. Wico Model B-4 Distributor, complete, new. (Part No: AR1370R)
$321.31

External Voltage Regulator - External Voltage Regulator. For Bosch System. For tractor models 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2840, 3030, 3120, 3130, 820, 830 LOADER, 830 WINDROWER, 920, 930 All with Bosch system. Replaces 01160376, 01163008, 190601009. (Part No: AT31413)
$67.08

Key Switch, 2 Terminal - With keys. For tractor models 420, (A from SN# 662874 and up), (AO, AR from SN# 275533 and up), (B from SN# 268820 and up), (G from SN# 46501 and up), 80, (820, 830 2-cylinders). Replaces A4699R, AA5592R, AB4063R, AB4087R. (Part No: AB4063R)
$34.88

Push Button Starter Switch - 3 Terminal Push Button Starter Switch with Rubber Cap. Fits 80, 720, 730, 820 2 cylinder, 830 2 cylinder (with Pony start)530, 630, 730 (Gas, LP, All fuel. This starter switch has 5/8 - 32" thread O.D., 3 screw terminals. Switch is rate up to 36 volts. Replaces: AR21219, AR21823, AR20431, AR1324R (Part No: AR21219)
$17.48

Rebuilt Delco Generator - This rebuilt generator fits the following tractor models:70 (diesel), 720 (diesel with serial number 7200000 and above), 730 (diesel with serial number 7200000 and above), 80 (pony motor), 820 (pony motor), and 830 (pony motor). Please note that there will be an additional core charge of $35 – this is refundable if you send your core to us. Replaces: TG-70, 1947580, SE501430, 1100027, 1100038, 1100048, and 1100054. (Part No: AR21907)
$246.18

Solenoid, 6 Volt - 3 terminal, Delco starters 1107466, 1107474, 1107155. Replaces 1119799, DR1465 (Part No: 142364HA)
$18.65

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H10, H10C, H10J, H11, H12, H8, H8J, RH10, RH12, RH8 spark plugs. For tractor models 320, 330, 420, 430, 820, 830. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type (Part No: AL295)
$2.85

Starter - 12 volt, 13 tooth, clockwise rotation. For tractor models 1133, (820 1968-72 with 3 cyl), (830 1972-75 with 3 cyl), 840, (920 1970-75), (1020 1965-73 with 152 dsl), (1520 1968-73 with 164 dsl), (1530 1974-75 with 164 dsl), (2020 1965-72 with 202 dsl), (2030 1971-75 with 219 dsl), (2040 1972-85 with 152 dsl), (2150 1982-87 with 3-179 dsl), (2155 1987-92 with 3-179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 3-179 dsl), (2350 1983-86 with 4-239 dsl), (2355 1986-92 with 4-239 dsl), (2550 1982-87 with 4-239 dsl), (880 1970-80 with 202 dsl), (270 1975-78 with 4-219 dsl), (2280 1975-85), (2320 1981-83 with 4-219 dsl), (2360 1984-93 dsl), (2420 1975-85 with 219 dsl). Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Part No: SND0044)
$127.44

Starter - This is a new Bosch design starter. 12v, 10 tooth, Direct Drive Bosch type unit. 3.0KW, two (2) bolt mount. Uses AL55046 solenoid and AL25275 drive. Uses correct 13.5mm mounting hole diameter on DE. Fits multiple John Deere Tractors. Replaces; John Deere part numbers: AL110597, AR70436, AT23401, SE501411, SE501412, TY25290, TY25292, TY6720, TY6726, TY6780. (Part No: AR70436)
$151.73

Starter Armature - Used with Delco Starter # 1107155, 1107424, 1107445 on John Deere (B with serial number 96000 to 200999), BO, BR, (70, 730, 80, 820, 830 with a pony start diesel). Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Part No: 1871662)
$67.02

Starter, New - The length of this starter is 12.250 inches over all. Many of the models listed have a very tight space for the stater. This is a 12 volt, Delco style starter with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Part No: RE239087)
$194.61

Starter Solenoid - Used with AR70436 starter. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1640, 1830, 1840, 2020, 2030, 2120, 2130, 2140, 2250, 2450, 2940, 3030, 3040, 3120, 3130, 3140, 820, 830, 840, 920, 930, 940. Replaces AL113664. (Part No: AL25268)
$32.93

Starter Solenoid - 2 bolt, Used with Bosch starters. For tractor models 1020, 1120, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130, 920, (1530 engine SN# up to 152929), 820, 830. (Part No: AL19192)
$70.68

Starter Switch, Keyed - This starter switch comes with 2 keys, has seven terminals on the back and is for models: 1020, 1030, 1120, 1130, 1630, 1830, 2020, 2030, 2120, 2130, 3030, 3120, 3130, 820, 830, 920, 930. Starter Switch replaces AR55721, AL16046. (Part No: AL19890)
$27.05

Switch, Thermostart - For tractor models 1020, 1030, 1120, 1130, 1630, 1640, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2255, 2350, 2550, 2750, 2950, 3030, 3120, 3130, 820, 830, 920, 930. Replaces AL25064, AL36365. (Part No: AL62707)
$22.43

Voltage Regulator - Voltage Regulator, (6 Volt). Fits 720, 730, 820, 830 tractors (Part No: 1118786)
$40.47

Engine Bearings
Main Bearing Set, 152 Diesel - Available in STD, .010, .020, .030 For 820, 830, 1020, 1030 with 152 Diesel Engine. Specify size in Comments box when ordering. (Part No: R-RE27352S3)
$78.89

Rod Bearing, .010, Diesel - (JD) Rod Bearing 010 (Single Pair) - For tractor models 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. Single rod bearing .010 . For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: AT21124)
$15.60

Rod Bearing, .020, Diesel - For tractor models 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. Single rod bearing .020". For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: AT21126)
$12.63

Rod Bearing, .030, Diesel - Single rod bearing .030". Fits 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: AT21128)
$12.63

Rod Bearing, STD, Diesel - Single rod bearing. Fits 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: AT21138)
$6.57

Engine Gaskets
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 6200, 6200, 6200L, 6200L, 6300, 6300L, 6400, 6400L, 6400SP, 6500, 6500L, 6506, 6600, 6800, 6900, 7200, 7220, 7320, 7400, 7500, 7600, 820, 830, 840, 920, 930, 930VU, 940, 940VU, SE6100, SE6200, SE6300, SE640, 500, 555, 750, 800, 850, 900, 950, 855, 950, 1072, 1075, 1075HY, 1085, 1133, 1144, 1155, 1157, 1158. Replaces AR67942, AT21608 (Part No: AT21608)
$11.61

Full Gasket Set - This is a Full Gasket Set without crankshaft seals. It includes Sealing Washers. Note: Narrow side of the fire ring (crimp) of the head gasket goes toward the cylinder head. It is used on 2 cylinder 80, 820, 830, 840. Replaces: AR1419R, AR1889R, RE524137 (Part No: FS2704)
$335.00

Gasket Set - Complete gasket set with crankshaft seals and sleeves (where required), 1 used per engine. For 820, 830, and 1020 diesel, 3 cylinder 152 CID. (Part No: FS3356W)
$101.13

Gasket Set, Complete, 152 Diesel - With Rear Main Seal & Timing Cover Seal For 301A, 820, 830, 1020, 1030 with 152 Diesel Engine. (Part No: R-RE38570)
$103.88

Head Gasket Set - This is a more comprehensive version of the traditional Head Set or Valve Grind Set. It includes all gaskets needed to replace cylinder head, including sealing washers. Note: Narrow side of the fire ring (crimp) of the head gasket goes toward the cylinder head. It is used on 2 cylinder 80, 820, 830, 840. Replaces: AR1418R, AR1419R, AR1888R, AR1889R, RE524137, RE524141 (Part No: HS2704)
$172.50

Head Gasket Set, 152 Diesel - For 820, 830, 1020, 1030 with 152 CID Diesel Engine. (3 Cylinder)R-RE38848 (Part No: HS3356W)
$83.82

Oil Seal - Seal. For tractor models 820 Mannheim serial number 042925 and up, 830 Mannheim with R47076 hub, 2040, 2240. For 2040, 2240, 820, 830 (Part No: TP-AR49592)
$12.01

Rear Main Seal - For 820, 830, 1020, 1030 with 152 Diesel Engine (Part No: R-RE24959)
$31.50

Engine Rebuild Kits
Engine Major Overhaul Kit, 152 Diesel - For AG: 820, 1020, 1030, all SN<154765, IND: 300, 300A, 350A, 350B, 380 all SN<154765 all with 3.152 Diesel, 300 Series, O-rings on Liner, 3 cylinder, block numbers T24963 & T26935, 3.86" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. Rear Seal will not fit with flywheel housing marked T20300, T22991. (Part No: OK3481)
$802.06

Engine Major Overhaul Kit, 152 Diesel - For 820, 830, 1020, 1030, all SN# 154766>, 300B, 301A, 200, 200A, 350A, 350B, 380 all SN# 154766>, all with 3.152 Diesel, 300 Series, with block numbers R53240, R55100, R72967, T32339, 3.86" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK3591)
$785.52

Rebore Kit - Piston Kit For 80, 820 and 830 DIESEl. 6 1/8" bore STANDARD. Contains pistons, rings, pins, and retainers. (Part No: R2035)
$843.41

Rebore Kit - Piston Kit For 80, 820 and 830 DIESEl. 6 1/8" bore.045 oversize. Contains pistons, rings, pins, and retainers. (Part No: R2467)
$821.10

Rebore Kit - Piston Kit For 80, 820 and 830 DIESEl. 6 1/8" bore.090 Oversize. Contains pistons, rings, pins, and retainers. (Part No: R1992)
$780.96

Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models 80, (820, 830 2-cylinder). (Part No: VTKJD80)
$333.11

Engine Parts
Connecting Rod - Fits (300B SN <710723 Diesel), (301A SN <710721 Diesel), (302 Gas), (310 SN <189323), (350B Diesel), (350C Eng. SN 329334-590074 Diesel), (380 Diesel), (410 SN <189345 Diesel), (450B SN <187208), (480A SN <193099 Diesel), (540A SN <119500), (570 SN <275230), (570A SN <275230), 1520, (2520 Diesel), (300, 300A, 350A, 350B, 380, 1020, 1030, 820, 830, W/ 3.152 ENG), (302, 302A, 350B, 1420, 1520, 1530 SN <179601 3.164D ENG). Also used in 4.219 and 6.303 Engines. Verify Casting numbers R81410 Or T20007. (Part No: RE19733)
$165.55

Connecting Rod Bolt - Used on Connecting Rods marked T20007, R51727, or R58979, this bolt is 2.125 inches long. (Part No: R74194)
$2.04

Crankshaft - This crankshaft should be verified by the Casting # T23516 off your old crankshaft AND Snout Length of 1.37 inches. This casting number had 2 different snout lengths and is NOT interchangeable. It does not come with gear or bearings. For tractor models 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2330, 2355, 300, 300A, 300B, 301A, 302, 302A, 310, 350A, 350B, 350C, 350D, 355D, 380, 5200, 5300, 5400, 5400N, 5500, 820, 830. Please Verify Length Of Snout Before Ordering, standard short snout (1.370"). (Part No: AT18031)
$532.10

Crankshaft Pulley - For JD103, 1020, 820, 830, 2240. Crankshaft Pulley replaces T24441, T25366. 1.5" I.D., 2.750" Center to Center on Holes. (Part No: R59915)
$113.91

Ring Gear - For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 5200, 5300, 5400, 5500, 6200, 6300, 6400, 6500. Starter Flywheel Ring Gear for DIESELS. (Part No: R114282)
$39.95

Ring Gear, Flywheel - This ring gear is used on Pony starting engine. For tractor models R, 80, 720, 730, 820, 830. (Part No: F2265R)
$79.10

Tappet - For tractor models 2510, 5210, 5310, 5410, 5510, 820, 920, 1020, 1120, 1520, 2020, 2520, 3120, 5220, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 4030, 2040, 2140, 2240, 2440, 3040, 3140, 3050. (Part No: T20073)
$7.49

Valve, Exhaust - For tractor models 80, (820, 830 both 2 cylinders). Replaces AR1383R. (Part No: R1337R)
$50.33

Valve, Intake - For tractor models 80, (820, 830 both 2 cylinders). Replaces AR1384R. (Part No: R1336R)
$35.59

Valve Lock - Pair - This pair of valve locks is a set for 1 valve. For tractor models 60, 620, 630, 720, 730, 80, (820, 830 2 cylinders), (A from SN# 488000), (AO, AR from SN# 260000 and up), R, (70 gas, LP and diesel). (Part No: A2332R)
$21.98

Valve Spring - For tractor models 80, (820, 830 both 2 cylinders). (Part No: R1338R)
$25.20

Valve Stem Cap - This Valve Stem Cap is used on Multiple John Deere Models. It replaces original part number T20129. (Part No: T20129)
$5.67

Engine Pistons and Sleeves
Piston Pin Bushing - Each, 4 required for 4 cylinder engine. For tractor models 820, 830, 1020, 2020, 2510. All gas with rod no. T20327T, and Models: 1010, 2010 gas or diesel with rod no. T454T. (Part No: 814665)
$18.59

Piston Pin Bushing - For tractor models (1020, 1030, 300, 300A, 350A, 350B, 380, 820 with 3.152 eng.), (1420, 1520, 1530, 302, 302A, 350B SN# 179601 and below with 3.164D eng.), (2020, 2510, 400, 440, 480 with 4.202 eng.), (2030, 2270, 2320, 2420, 2520, 401, 401A, 440, 440A, 440B, 450A, 450B, 480A, 499 SN# 275483 and up with 4.219 eng.), (2355NCS, 2355NTSS with 3.179T eng.), (300B, 301A, 830 SN# 154766 and up with 3.152 eng.), (3120, 4020, 4030, 4420, 499, 540A, 544A, 570A, 699 SN# 277548 and below with 6.329 eng.), (3420, 544 SN# 158976 and up with 6.303 eng.), (450 SN# 158257 and below with 4.202 eng), 5400N, 5500. (Part No: T23471)
$8.97

Sleeve Assembly (3 Required) - 3.858 Bore with O-Rings on Sleeve For 820, 830, 1020, 1030 with 152 Diesel Engine (To S#154765) (Part No: R-CK3481)
$119.56

Sleeve & Piston Kit - Complete kit for one cylinder. 3.86" bore, 1.185" pins. O-rings in block. (3) required For tractor models 1020, 1030, 300, 300A, 300B, 301A, 350A, 350B, 380, 820, 830 all SN# 154766 and up with 3.152D engine. (4) required For tractor models 2020, 2510, 400, 440, 480 all SN# 158257 and up with 4.202 engine. (6) required For tractor models 3420, 544 SN# 158976 and up with 6.303 engine. Kit comes with piston, pins, sleeve, rings. (Part No: AR71591)
$152.96

Exhaust System
Chrome Curved Exhaust Stack - For tractor models R, 80, 820, 830 Chrome Curved Exhaust Stack. 4 inch OD, 24 inches Tall, Double Wall Lined. 16 Gauge. (Part No: R3547)
$124.69

Manifold - For 1020, 1520, 1530, 2040, 2240, 820, 830, all with 3 cylinder diesel engines. Exhaust Manifold. Does not come with Manifold Gasket. Order part number R0912G for gasket set. (Part No: T20252)
$99.75

Manifold Gasket Set - This gasket set is used with T20252 Manifold. For tractor models 1020, 1520, 1530, 2040, 2240, 820, 830, 920, 930 and 940. (Part No: R0912G)
$7.88

Muffler, Vertical - Round body 3-3/4" shell diameter, 3 bolt mounting plate, 18-1/4" shell length, 1" outlet length, E= 2-1/2" outlet O.D., F= 20" overall length. For model (R with diesel engine from 1949 to 1954), (80 with diesel engine from 1954 to 1956), (820 with diesel engine from 1956 to 1958). (Part No: AR327R)
$45.28

Muffler, Vertical - Oval body 9-1/2" x 5-1/2" shell, A= 2-1/2" inlet length, B= 3-3/8" inlet I.D., C= 14-1/4" shell length, D= 2-3/4" outlet length, E= 3-1/2" outlet O.D., F= 19" overall length. For tractor models (80, 820 optional muffler), (830 standard muffler) (Part No: AR21805R)
$77.56

Muffler, Vertical - This vertical muffler measures 2-1/2 inches flared inlet, 2 inches outlet outside diameter, 31-1/2 inches overall length. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, (1350, 1550, 1750, 1850 SN# up to 621999), 820, 830, 840, 920, 930, 940, 1630. (Part No: AL27388)
$93.11

Fuel System / Air Intake
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Part No: R28794)
$6.26

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Part No: T23262)
$6.68

Air Cleaner Hose - A=2.437", B= 2.250". For tractor models 1020, 1030, 1120, 1130, 1530, 2040, 820, 830, 930. (Part No: L29374)
$39.49

Air Cleaner Hose, Suction - A= 2.75", B=2.00". For tractor models 1020, 1030, 1120, 1130, 1530, 1630, (1830, 2030 SN# 115792 TO 292145), (2040 SN# UP TO 349999), (2130 SN# 115792 TO 292145), (2240 SN# UP TO 349999), 820, 920, 830, 930. (Part No: L29373)
$28.59

Air Cleaner Pipe Grommet - This air cleaner pipe grommet has an inside diameter of 2.60 inches, outside diameter of 6.82 inches and is 2.37 inches tall. For tractor models (820, 830 3 cylinder), 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 6150, (4000, 4020 diesel), 4030, 4040, (4050 up to SN# 5510), 4230, 4240. Replaces AR56275, R28799, R50082, R57119. (Part No: AR56061)
$21.21

Air Cleaner Stack - For tractor models 820 and 830, both 2 cylinder. (Part No: AR1728R)
$59.06

Air Cleaner Stack - Air Cleaner Stack For R, 80, 820 2 cylinder, 830 2 cylinder; Replaces: AR319R . (Part No: AR319R)
$109.15

Carburetor Kit, Economy, Pony Motor - Used with Pony starting engine with Zenith carbs #11681 & 12172. For tractor models 70 diesel, 80, (720, 730 diesel), (820, 830 both 2 cylinder). (Part No: R5284)
$53.48

Choke Knob - For tractor models A, B, D, G, H, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Part No: B1951R)
$11.25

Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on John Deere (820 3 cylinder), 920, 1020, 1120, 1520, 300, 300B, 301, 301A, 302, 302A, 310B, 350, 350B, 380, (2020, 2120 Europe), 3120. Replaces original part number R56434 (Part No: 1039071M1)
$4.79

Fuel Filter - Fuel filter element, cartridge type, for diesel tractors with dual filters. 0.750 inches inside diameter, 3.371 inches outside diameter, 4.122 inches tall. Models: 70, 730, 4020, 600, R, 80, 720, 820, 830, 3010, 3020, 4000, 4010, 840, 4520, 5020. Replaces AR28611, AR344R, AR44077 (Part No: TP-AR44077)
$10.95

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Part No: 81825363)
$7.53

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Part No: CAV7111296)
$2.79

Fuel Injection Return - "T" Boot fuel injection return. Fits models: 1020, 1120, 2020, 2120, 2510, 3120, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 5200, 5400, 5440, 5460, 6076 Eng. SN# <576895, 6600, 6602, 6619 Eng. SN# <027969, 6620, 690B, 693B, 7440, 7700, 7720, 820, 8430, 8630, 920, 9920, 300, 350, 400, 440, 440A, 440B, 450, 480, 544, 544A, 570, 570A, 740, 743, 762. (Part No: T23425)
$3.21

Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Part No: R34656)
$20.45

Fuel Tank - Fiberglass Fuel Tank is for tractor models:(1020, 1030, 1120, 1130, 1630, 820, 830, 920, 930)(2040, 2240 All SN<349999). Fuel Tank for European models and US 1530. (Part No: AR72910)
$846

Glass Body Fuel Filter - Diesel fuel filter element~ see-thru glass body. For most 1971 and up John Deere 4 and 6 cylinder tractors and combines produced in U.S.A. and equipped with Roosa-Master injection systems. Replaces Baldwin BF-909, Wix 33370, and Fram P1130. For 1530, 2040, 2240, 2440, 2630, 2640, 2840, 2940, 3020, 4000, 4030, 4040, 4230, 4240, 4320, 4400, 4420, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6600, 6602, 6622, 7020, 7520, 7700, 820, 830, 8430 (Part No: AR50041)
$14.13

Grommet, Fuel Filler, Red - For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). (Part No: R39613R)
$18.75

Manifold Heater - Thermostart Intake Manifold Heater Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: AAU8491, AR63103, 47P606 (Part No: 3583543M2)
$16.04

Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Part No: AF3583R)
$26.48

Sediment Bowl Assembly - Large Bowl. 1/8 inch pipe thread to fuel line, 3/8 pipe to tank. For tractor models A, B, 60, 620, 70, 720, 730, 80, 820, 830. Fuel Strainer assembly with 2.25 inch bowl. This will replace the AUTOMATIC SHUT OFF assembly with a manual shut off for the late A and B models. (Part No: S.61581)
$18.23

Sediment Bowl Assembly Glass Bowl - Fits S.61581 fuel strainer. Top of bowl outside diameter is 2 1/8.For tractor models A, B, 60, 620, 70, 720, 730, 80, 820, 830. (Part No: S.65504)
$3.80

Sending Unit, Fuel - Sending Unit, fuel (spade type terminals). For tractor models 1020, 1030, 1120, 1130, 1530, 1630, 1830 (serial number <294961), 2030 (serial number <294961), 2130 (serial number <294961), 2140, 2240 (serial number <349999), 2840, 3030, 3130, 820 (3 cylinder), 830 (3 cylinder), 920, 930. Replaces AT31619. (Part No: AT31619)
$49.93

Vent Tube and Radiator Overflow Packing - This packing installs in the nut that is on either end of your vent tube or one end of your radiator overflow tube. It is used on John Deere A, B, D, G, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830. Replaces John Deere Part Number B60R (Part No: B60R)
$.56

Gaskets
Pony Motor Crankshaft Seal - This Pony Motor Crankshaft Seal Measures 1.000" I.D., 1.503" O.D., 0.250" Fits: 70 (Used as a Pony motor crankshaft seal (2 used per tractor) on Diesel models. Also used as a Pony Motor input shaft seal on Diesel models.), 720 (Used as a Pony motor crankshaft seal (2 used per tractor) on Diesel models. On the flywheel side up to SN: 721489 and on the crankshaft gear side all serial numbers. Also used as a Pony Motor input shaft seal on Diesel models.), 730 (Used as a Pony Motor input shaft seal on Diesel models.), 80 (used as a Pony motor crankshaft seal (2 used per tractor). Also used as a Pony Motor input shaft seal. ), [820 2 cylinder, 830 2 cylinder (Used as a Pony motor crankshaft seal (2 used per tractor). Also used as a Pony Motor input shaft seal. )] Sold individually. Replaces: AF2167R (Part No: 43800D)
$10.34

Gauges
Amp Gauge - For tractor models A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, black faceplate and a black bezel. Replaces AM1864T, AF2749R. (Part No: R3803)
$21.90

Fuel Gauge - This Fuel Gauge is used multiple John Deere tractors and combines. It is a 12 volt illuminated gauge with a 2.047 inch body outside diameter. The length of the gauge is 1.87 inches. It replaces original John Deere part numbers AL24187, AL18155, AL24294 (Part No: AL24294)
$26.16

Fuel Gauge, 12 Volt - This electric fuel gauge fits 2 Cylinder models; 520, 530, 620, 630, (720, 730 Gas), (720, 730 Diesel (12/24 volt electric start), (820 2 cylinder, 830 2 cylinder 12/24 volt electric start). This fuel gauge is calibrated to the original resistance, 0 - 30 OHMs, positive ground system. Replaces: AF2721R (Part No: AF2721R)
$42.75

Fuel Gauge, 6 Volt - This 6 volt positive ground fuel gauge is used on the following two cylinder diesel tractors with pony start motors: 70, 720, 730, 80, 820, 830. The gauge reads from 0 - 30 Ohms. Replaces original part numbers AF2170R, AF2739R (Part No: AF2739R)
$39.85

Fuel Sending Unit - This fuel sending unit is used on the following 2 cylinder tractors: 520, 530, [620, 630 (General Purpose, Standard or Orchard.)], [70, 720, 730 (Gas, LP, and Diesel)], 80, 820, 830, 840. It will work for 6 or 12 volt, positive or negative ground providing the appropriate gauge is used. This fuel sending unit is properly calibrated to the original resistance, 0 to 30 OHMs. It replaces original part numbers AB5139R, AF2173R, AR1112R (Part No: AR1112R)
$51.75

Leveling Arm Pin - Used for attaching the leveling arms to the upper lift arms, this Pin is used on John Deere models 820, 830, 840, 920, 930, 940, 1020, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840 serial number 429999 and below, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3350. (Part No: AT21754)
$18.92

Oil Gauge Adapter Fitting - This Oil Gauge Adapter Fitting is 1/8 inch NPT female to 3/16 inch tubing female. It is used on some gauges without removable fitting. (Part No: 9N18685)
$3.75

Tachometer - This new tachometer fits; A serial number 648000 and up, AO and AR serial number 272000 and up, B serial number 201000 and up, [ 50, 520, 530, 60, 620, 630, 70, 720, 730 (Gas/Lp) ], [ 70, 720, 730 (Diesel) ], [ 80, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Serviceable, Face plate will have the wrong Mph.) ]; Replaces: AB5132R, AB5134R, AF1719R, AF2066R, AF2698R, AR20055R, AR20825, AR20836, AR21661, AR21662, AR21663, AR21663R, AR21664R (Part No: R4611)
$104.19

Tachometer Cable - 23" total length. For tractor models 1020, 1130, 1530, 1630, 820, 830, (2040, 2240 SN# up to 349999). Replaces AT19905. (Part No: AL23837)
$16.62

Tachometer Cable - For tractor models 80, (820, 830 2 cylinder). (Part No: AR1318R)
$70.86

Temperature Gauge - For tractor models 4425, 4435, 1020, (1030, 1130, 1630, 1830, 2030, 2040, 2130, 2240, 2840, 830 SN# 268527 and up), 1120, 2020, 3030, 3120, 3130, 820. This is an electronic gauge. There is not mechanical sending unit. (Part No: AL24526)
$22.82

Water Temperature Gauge - Black face. 72 inch lead. Without John Deere Logo. 140-230. For tractor models A, AR, B, D, G, M, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840. Also replaces AA6295R, AA7263R, AM2444T, AT13849T, AR20783R. (Part No: AR490R)
$29.25

Hitch / Drawbar
Drawbar - Straight 1.250 x 2.50 x 36.750.781 Holes at 1.125, 2.750, & 8.578 For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2240, 2350, 2355, 2550, 2630, 2640, 2750, 2755, 2855 (Part No: R3092)
$170.79

Drawbar Front Support - This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Part No: AL27203)
$54.03

Drawbar Front Support Pin - This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Part No: L32016)
$12.89

Drawbar Front Support Pin Adapter - This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Part No: L31849)
$8.86

Drawbar Hammer Strap - .75" thick. For tractor models 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855N, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5320N, 5400, 5410, 5420, 5420N, 5500, 5510, 5520, 5520N, 820 3 cylinder, 830 3-cylinder. (Part No: T29899)
$63.11

Drawbar, Offset - 2.250 Offset 1.25" x 2.50" x 36.625" (.781 Holes at 1.125, 2.750, & 8.575") For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2141, 2240, 2250, 2251, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2850, 2855, 820, 830. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Drawbar pin available as part# L32016. (Part No: L29020)
$181.79

Drawbar Pin - This Drawbar Pin is used on John Deere 820, 920, 1020, 1120, 1520, 2020, 2120, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 300B. It replaces AT19850 (Part No: AT19850)
$43.23

Front Pull Arm, Left Hand - Left Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (Part No: AT30151)
$290.02

Front Pull Arm, Right Hand - Right Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640. (Part No: AT30150)
$302.11

Housing Assembly - 15 Long - Adjustable Consists of: R3104, R3106, R3110, R3111, R3112, R3119, & R3120 For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255 (Part No: R3109)
$170.79

Housing Assembly - 17.50 Long - Adjustable Consists of: R3104, R3105, R3110, R3111, R3112, R3119, & R3120 For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255 (Part No: R3108)
$170.79

Leveling Arm Screw - Used on John Deere 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Leveling Arm Screw is 17.50 inches long. Replaces T25835 (Part No: T25835)
$74.18

Leveling Arm Screw - Measuring 15.187 inches over all length, this Leveling Arm Screw is used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces T24908 (Part No: T24908)
$75.90

Leveling Assembly Housing - Used with telescoping 3pt pull arms, the rod on this Housing Assembly is 15.00 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-15, L2837415 (Part No: L2837415)
$150.63

Leveling Assembly Housing - Used with non-telescoping 3pt pull arms, the rod on this Housing Assembly is 17.50 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-17, L2837417 (Part No: L2837417)
$150.63

Leveling Box Handle - Used on tractors with telescoping 3-point pull arms, this part replaces John Deere part number T21559, T28346 (Part No: T21559)
$17.10

Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable with 17.50" (hole-to-hole) lift link rod. Fits 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Part No: AR44556)
$101.25

Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable with 21.75" (hole-to-hole) lift link rod. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Part No: AR44554)
$102.93

Lift Link Assembly, Right Hand - Right Hand. 15 inch rod length. For tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. R48595, RE16370, T24908 (Part No: AR44552)
$136.30

Lift Link Assembly, Right Hand - Right Hand. 17.5" rod length. Housing Assembly. For: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Part No: AR44551)
$127.86

Lift Link Ball - Used on John Deere models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1950, 2020, 2030, 2040, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3255, 400, 401, 401B, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T22399 (Part No: T22399)
$21.45

Lift Link Housing Shaft - Used in the housing of the adjustable leveling are assembly, this part fits John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3155, 3255, 400, 401, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T21558 (Part No: T21558)
$16.50

Lift Link Rod - Used on the non-adjustable lift arm, this Lift Link Rod measures 19.125 inches overall. It includes T21901 Lift Rod Ball. (Part No: T24909)
$100.51

Lift Link Rod - For John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lift Link Rod, comes with T21901 Lift Rod Ball. The overall length is 21.750 inches long. (Part No: T25836)
$100.26

Lower Lift Arm Ball - Measuring 3/4 inch inside diameter, 1 3/16 inch outside diameter, and 1 3/8 inch wide. This part replaces John Deere part number T21901. Used on John Deere 1020, 1530, 2020, 2030, 2040, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2855N, 2940, 2950, 3030, 3055, 3150, 3155, 820, 830 (Part No: T21901)
$11.31

Lower Lift Yoke - Used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lower Lift Casting replaces John Deere part number R48595 (Part No: R48595)
$41.93

Lower Link Adapter Nut - Used on telescoping lower lift arms, this is a 1-5/8 inch adapter nut. It replaces John Deere part number T21758 (Part No: T21758)
$12.60

Pull Arm, Heavy Duty, Cat II, RH/LH - 33.50" Center to center. Hole towards center is not as pictured. For tractor models JD301, JD400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 302, 401B, 401D, 820, 830, 300B, 302A, 401C. Replaces AT19849. (Part No: AR77530)
$307.15

Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 & 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Part No: AR28570)
$166.44

Sway Block Bracket, Left Hand - This Left Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20168 (Part No: AT20168)
$43.06

Sway Block Bracket, LH - For tractor models (820 German), 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2155, 2355, 2555, 2755, 300B, 2630, 2640, 2855. (Part No: S.61017)
$44.34

Sway Block Bracket, RH - For tractor models (820 German), 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2155, 2355, 2555, 2755, 300B, 2630, 2640, 2855. (Part No: S.61018)
$44.34

Sway Block Bracket, Right Hand - This Right Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20167 (Part No: AT20167)
$56.10

Sway Block, LH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Part No: T30277)
$61.76

Sway Block, RH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Part No: T30276)
$43.47

Top Link Bracket - For Category I hitches on: 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855. (Part No: T21685)
$51.34

Top Link Mounting Pin - Used on John Deere models: 820 (3 Cyl.), 830 (3 Cyl.), 840, 940, 1020, 1040, 1140, 1350, 1520, 1530, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3141, 3150, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D. This part replaces John Deere part numbers AT21912, AL40957 (Part No: AL40957)
$22.13

Upper Lift Arm Housing - Used on John Deere 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this part replaces John Deere part number L33535 (Part No: L33535)
$44.78

Valve Seat Insert, Rockshaft Cylinder - For tractor models 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3640, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940, (JD300, JD400 SN# 146363 and up), JD301, JD401. (Part No: T28538)
$24.28

Valve Spool, Rockshaft Cylinder - For tractor models 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3640, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940, (JD300, JD400 SN# 146363 and up), JD301, JD401. (Part No: R54969)
$24.81

Hydraulic System
Hydraulic Lever Grip - For tractor models 80, 520, 530, 620, 630, 720, 730, 820, 830, 840. (Part No: F2948R)
$10.40

Hydraulic Lift Shaft - For tractor models (1020 up to SN# 117499), 1120, 1030, 1130, 1630, 1520, 1530, 1640, 1840, 2040, 1830, 2030, 2130, 2020, 2120, 2030, (2040 SN# 350000 and up), 2150, 2255, 2155, 2355N, 2240, 2440, 2630, 2640, 2755, 2855N, 300B, 820, 920, 830, 930. (Part No: T29931)
$125.43

Rockshaft Cover Gasket - This Rockshaft Cover Gasket (Lift Cover Gasket) Fits John Deere Tractor(s) 820 (3 Cyl.), 830 (3 Cyl.), 920, 930, 1020, 1030, 1040, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040 (s/n 349999-earlier), 2040S, 2120, 2130, 2140, 2240 (s/n 349999-earlier), 2440, 2630, 2640. Construction & Industrial: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C. Replaces L41551, L34401, T21641 (Part No: T21641)
$10.49

Lights
12 Volt Bulb - This bulb allows you to use the AR77326 work light for 12 volt applications. (Part No: S.51140)
$3.98

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Part No: 28A116)
$12.03

Headlight Lens - Replacement glass lens is 4.75 inch outside diameter for headlamp assemblies AA3075R, AF3817R. For tractor models A, B, D, R, 70D, 80, 820, 830. (Part No: GC200)
$13.35

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2" measure directly across the top of the housing. For the following tractors: ( A, B with sheet metal dash), 70 gas and diesel, 730 gas and diesel, D up to serial number 143800, 720 gas and diesel, 50, 60, 630, AO, AR, H, R, 80, 520, 530, 620, 720, (820, 830 2 cylinder). Replaces 53523D, AA3238R. (Part No: AA3238R)
$17.38

Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Part No: 504781M1)
$1.77

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: L4411LED)
$48.10

Lens - Lens, combination front or rear light, for 5 inch diameter lights, for light TP-AA3075R on tractors: A, B, D, G, R, 7 0D, 7 20D, 730D, 80, 820, 830. Manufactured to restoration standards. For 70, 720, 730, 80, 820, 830, A, B, D, G, R Replaces A2731R (Part No: GC200)
$13.35

Light Bracket, Headlight - For A from SN# 477000 to 500011. For AO and AR up to SN# 276799. For B from SN# 60000 to 95999. For BO and BR after SN# 325000. For tractor models D, 80, 820, 830. Light Bracket. (Part No: D2914R)
$53.08

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Part No: 373662R91)
$8.48

Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. Replaces: TI9178, TI2443 (Part No: T12443)
$41.96

Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Part No: R27460)
$13.35

Light Ring - The dimensions of this light ring with screw are 4.5 inches in height and 0.885 inches in width. Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676. Verify measurements before ordering. Most models used more than one headlight style in production. (Part No: 371449R91)
$28.50

Rear Combo Light - For 50, 520, 530, 60, 620, 630, 70, 720, 730 - ALL GAS. 70, 720, 730, 820, 830 - ALL DIESEL WITH ELECTRIC START. 12V Rear Combo Light, 5". (3869R) (Part No: AA5199R)
$70.38

Rear Combo Light - For 70, 720, 730, 80, 820, 830 - ALL WITH DIESEL WITH PONY MOTOR. 6V Rear Combo Light, 5". (3870R) (Part No: AF3088R)
$73.67

Ring - Moulding trim ring for headlights or rear lights, for light TP-AA3075R.* Manufactured to restoration standards. For tractor models 70, 720, 730, 80, 820, 830, A, B, D, G, R. (Part No: TP-AA3241R)
$19.11

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Part No: S.61357)
$18.75

Work Tail Light - 2 wire connectors. 6 Volt. For tractor models 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. If you have a 12 volt application, order bulb # S.51140 for an additional cost. (Part No: AR77326)
$53.74

Miscellaneous
Umbrella Bracket Assembly - For tractor models with Battery Box Mounted Seats: 50, A, 60, B, G, 520, 530, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, R. (Part No: AA4206R)
$92.49

Oil System
Oil Dipstick - 10.63" long, .63" dia. For tractor models 1020, 1030, 1130, 1520, 1530, 1630, (1640, 2040S, 2140 SN# 430000 and up), 1830, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2270, 2280, 2320, 2355, 2420, 2440, 2520, 2555, 2755, 2840, 2940, 2950, (2955 SN# up to 765516), 300B, 301A, 3055, 3150, (3155 SN# up to 738221), 3255, 410, 820, 830, 920, 930, JD24, JD301. (Part No: AT21534)
$8.03

Oil Pressure Sending Unit - For tractor models 1010, 1020, 1520, 1530, 2010 serial number 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. (Part No: AR27977)
$10.17

Oil Pump - With Tube for 2510, 1020, 1520, 2020, 2520, 1530, 2030, 4030, 2440, 2840, 2940, 820 German, 830, 2040, 2240, 2150, 2350, 2550, 2155, 2355, 2555, 2755. Engine Oil Pump Kit contains: Pump Boby, Driven Gear & Shaft, Driven Gear, and Rear Cover. Replaces OEM# RE35685. (Part No: S.60037)
$110.26

Oil Pump - For 3300, 350A, 350B, 350C, 350D, 400, 401, 401A, 410, 440, 440A, 440B, 4400, 450, 450A, 450B, 480, 480A, 499, 5000, 5200, 5300, 5400, 5400N, 5500, 6602, 6620, 820, 830, (3164D, 3179, 4039D, 4039T, 4219DF, 4239D, 4239T, 6059D, 6059T, 6329D, 6359D, 6359T, ALL DIESEL ENGINES). Oil Pump for 3-164, 3-179, 4-219, 4-239 Engines. Replaces AR62979, marked R54615. (Part No: RE35685)
$110.26

Oil Pump Drive Gear - For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255, 4030, 4050, 7200, 7400, 7600, 820, 830. Oil Pump Drive Gear has 33 Tooth, 3.625 O.D., .550" I.D. (Part No: T20298)
$115.33

Paint
Paint, Classic Green, 1 Gallon - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP215GAL)
$44.00

Paint, Classic Green, 1 Quart - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP215QT)
$17.55

Paint, Classic Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP215SP)
$44.19

PTO / Driveline
Bearing Housing, without Bearing - For tractor models 820, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2130, (2240 SN# up to 349999), 2440, 2630, 2640. (Part No: T21996)
$113.86

Brake Plate, (PTO) - With facing. For tractor models 80, 620, 630, 720, 730, 820, 830. Replaces RE20727. (Part No: AF2768R)
$45.29

Clutch Disc, (PTO) - With Facing. For tractor models 50 serial number 5032350 and up, 60 serial number 6060700 and up, 70 serial number 7039400 and up, 80, 520, 530, 620, 630, 720, 730, 820, 830. Replaces RE29784. (Part No: AR1294R)
$16.13

Clutch Drive Disc, (PTO) - For tractor models 80, 820, 830. (Part No: R1902R)
$21.00

Clutch Plate, (PTO) - 1.40" I.D., 5.00" O.D. .290" thickness. For tractor models 50 SN# 5032350 and up, 520, 530, 60 SN# 6060700 and up, 620, 630, 70 SN# 7039400 and up, 720, 730, 80, 820, 830. (Part No: RE29794)
$30.27

PTO Bearing Housing / Quill - This is the Bearing Housing / Quill, Rear PTO Shaft used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400. Replaces T22237, R47514 (Part No: R47514)
$188.73

PTO Clutch Drum Inner Seal - This PTO Clutch Drum Inner Seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. [50, 60, 70 (PTO Clutch Drum Inner Seal on following (Rowcrop, Orchard, HiCrop and Standard) with Engine driven live PTO) ], [ 520, 530, 620, 630, 720, 730 (PTO Clutch Drum Inner Seal on following (Rowcrop, Orchard, HiCrop and Standard) with Engine driven live PTO. Also used For Dual power control valve control arm seal.) ], [ 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Used For Dual power control valve control arm seal.)]; Replaces: AA5247R, AR1355R, AT11492, RE14867. (Part No: 195501M1)
$5.03

PTO Shaft - This PTO Shaft is 31.250 long, 6 spline, 540 RPM. It is used on some of the following: 1020 (W/ HEAVY DUTY PTO BEARINGS), 1030, 1040 (Serial Number 437370 and up), 1120 (W/ HEAVY DUTY PTO BEARINGS), 1130, 1140 (SN 437370>), 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 2030, 2040 (Serial Number 350000 and up), 2130, 2140, 2150, 2155, 2240 (Serial Number 350000 and up), 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2750, 2755, 2855, 820 (3 Cyl.) (W/ HEAVY DUTY PTO BEARINGS), 840 (Serial Number 437370 and up), 920 (W/ HEAVY DUTY PTO BEARINGS), 940 (Serial Number 437370 and up) It replaces L28712, L38806. Verify measurements and OEM Numbers. (Part No: L38806)
$351.32

PTO Shaft, 1000 RPM - 5.290" long, 21 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1520, 2020, 2030, 2120, 302, 820, 920, 1030, (2440 SN# up to 340999). (Part No: AT20095)
$154.37

PTO Shaft, 540 RPM - 31.250" long, 6 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1520, 1530, 1830, 2020, 2030, 2040, 2120, 2240, 2630, 301A, 302, 401B, 820, 830, (920 up to SN# 178089), 300B, 302A, 401C, (2440, 2640 SN# up to 340999). (Part No: R47249)
$304.91

PTO Shaft, 540 RPM - 6.875" long, 6 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1520, 2020, 2030, 2120, 2440, 302, 820, 920, 1030. (Part No: AT20094)
$258.57

PTO Shaft Seal - This Seal has multiple applications for John Deere, including; PTO seal, differential brake pinion shaft seal, inner bearing housing seal, direction reverser seal, upper final drive outer pinion shaft seal, front wheel assist transfer box seal, and others. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Verify measurements or OEM part number before ordering. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Part No: 70241779)
$6.89

Seats
Arm Rests - Pair - Black Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R1190)
$69.00

Arm Rests, Pair - Yellow Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R1188)
$70.88

Backrest, Black - Superior, weatherproofed covers, material identical to cushions. Tee-nuts & cap screws included for easy installation. Holes are pre-set & drilled. Black. For tractor models A, B, G, 50, 60, 70, 520, 620, 720, 730, 820, 830 series (Replaces AR21965R) (19-1/2x5-1/4). (Part No: JT300B)
$42.50

Seat Adjust Handle - For 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat (Part No: R3889)
$30.71

Seat Back - Yellow, wood back. 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. Picture shows seat bottom. Not included in price. Order P/N R0172 if needed. (Part No: R0173)
$39.00

Seat Back - Yellow, wood, 9 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R0993)
$46.23

Seat Back - Black, wood, 6 inches high. For tractor models A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Part No: 363219R91-1)
$39.00

Seat Bottom - Black, wood, 20 inches x 15 inches. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 R0863 (Part No: 363220R91-1)
$46.92

Seat Bottom (Float Ride) - Yellow, wood. for 520, 530, 620, 630, 720, 730, 820, 830, 840 all with Float Ride only. This seat cushion measures 20-5/8 Inches by 14-1/2 Inches wide and 5 Inches tall. Order part number JT77Y if you want just a standard seat bottom. Replaces AF3270R (Part No: R0994)
$46.92

Seat Bracket Set - This Seat Bracket Set is used with JD5678 seat cushion set. Kit contains: (1) R34272 back support bracket, (1) R27785 rear armrest support bracket, (1) R31512 RH seat bracket & (1) R31513 LH seat bracket. (Part No: SBK400)
$34.43

Seat Pin & Bushing Kit - For 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat (Part No: R2483)
$56.70

Seat Shock Absorber - For 520, 530, 620, 630, 720, 730, 820, 830. Seat shock absorber with bushings for tractor models with Float Ride Seat. Center to center extended is 13 inches, compressed 8 3/4 inches. Replaces AF3426R. (Part No: R2481)
$42.78

Seat Shock Bushing Pair - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. Price is for a pair (2 pieces). This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Part No: 72696R1)
$4.50

Seat Spring, Rubber - Left Hand For 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat. (Part No: AR39649)
$41.25

Seat Tie Bar Plate - This Seat Tie Bar Plate is for 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat (Part No: R3890)
$37.20

Wrap Around Seat Assembly - Yellow - For tractor models 1020, 1030, 1120, 3030, 3040, 3130, 3140, 820, 830, 920, 930, 2280, 2320, 2420, 2150, 2155, 2240, 2250, 2350, 2355, 2440 Late, 2550, 2555, 2640 Late, 2750, 2750, 2840, 2940, 2950, 2955. Add an Additional $15 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: W222YL)
$92.90

Sheet Metal / Body Parts
Battery Base - Use with R1521 & R1522 For B (From S# 201000), R, 80, 820, 830 with Pony Motor. Replaces OEM# AR1326R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R3285)
$55.13

Battery Box - For 820, 830. All With Pony Motor and NOT Float Ride Seat. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AR1565R)
$136.66

Battery Cover - For 820 with 3 cyl, 830 with 3 cyl, 1020, 1030, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640. Battery Cover. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AT20026)
$43.23

Fender Extension, LH - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2150, 2155, 2240, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 830, 920, 930. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AL25635, AL66516 (Part No: AL66516)
$39.80

Fender Extension, RH - This Fender Extension, (Side Step) is for tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2150, 2155, 2240, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 830, 920, 930. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AL66515)
$35.63

Fender, LH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, LH. Fender, shell style with braces and brackets welded in place. Comes primed. Replaces AR51407, AR51408, AT20779, AT27148. ADDITIONAL $10 SHIPPING DUE TO SIZE AND WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: AL28585)
$124.19

Fender, RH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, shell style with braces and brackets welded in place. Comes primed. Fender, RH. Replaces AT20777, AT27146. ADDITIONAL $10 SHIPPING DUE TO SIZE AND WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: AL28584)
$124.19

Grill Screen - For one piece wrap-around style For R, 80, 820, 830. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R293R)
$73.08

Side Screen - POWDER COAT GREEN 13 3/4 inches x 17 inches. For 820 (German), 830, 1020, 1530, 2040, 2240. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. 2 used per tractor. (Part No: AR72949)
$72.17

Step Assembly - For 80, 820, 830. OEM# F3195R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R4291)
$48.38

Toolbox - For 80, 820, 830. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R2469)
$66.98

Steering
Ball Joint - Length is 5.00", female end diameter is 1.125" I.D.. Fits 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1630, 1640, 1641F, 1750, 1950N, 2020, 2120, 2150, 2155 (with SWEPT BACK AXLE), 2250, 2251N, 2255, 2350, 2355, 2355N (with SWEPT BACK AXLE), 2450, 2550, 2555, 2755, 2855 (with SWEPT BACK AXLE), 820, 830, 840, 920, 930. Replaces: DE16303, 14M3290, AL39020, AL68629, AT27130 (Part No: AL39020)
$34.63

Ball Joint, 11 Notch - A= 12.250", B= .781". For tractor models 1120, 1350, 1950N, 2150, 2255, 820, 830, 840, 920, 930, (1750, 2155, 2355N, 2855N, 1040 all with swept back axle), 1030. (Part No: AL39022)
$43.62

Bellcrank - For tractor models (2440, 2640 serial number up to 308804 with 49 inch-79 inch swept back adj. axle), (2040, 2240 serial number up to 349999 with swept back adj. axle), (1530 with straight or swept back adj. axles), (JD301, JD401, 2630, 820, 830 with swept back adj. axle), (1020, 2020, with 44 inch-66 inch or 48 inch-78 inch swept back adj. axle), (1520 with 48 inch-78 inch swept back adj. axle), (JD300, JD400 without loader/backhoe with swept back adj. axle). (Part No: AR92944)
$339.94

Bellcrank - Casting #T21504. For tractor models (300, 301, 400, 401, 820, 830, 1020, 1520, 1530, 2020, 2630 all with swept back axle), (2030 SN# up to 187300 with swept back axle), (2040, 2240 SN# up to 349999 with swept back axle), (2440, 2640 SN# up to 308804 with swept back axle). (Part No: AT19794)
$295.28

Center Steering Arm Pin - Please check dimensions before ordering. Pin is 5.690" long X 1.499" diameter. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Center Steering Arm Pin. Used with Center Steering Arms: AR91812, AR92945, AR91811 and AR92944. (Part No: 91811S)
$37.73

Drag Link Assembly - 35.781 Long For 820, 830, 1020, 1520, 1530, 2040, 2240 (To S#349999) (Part No: AR68818)
$85.97

Front Axle Casting Front Bushing - Measuring 0.810 inches inside diameter, 1.250 inches outside diameter and 3.636 inches long, this bushing is used on 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. Replaces T21669 (Part No: T21669)
$15.53

Front Axle Casting Rear Bushing - Used on John Deere models: 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. This bearing measures 1.765 inches outside diameter, 1.575 inches inside diameter, and is 1.500 wide. Replaces John Deere OEM numbers L57310, L62836, T23170 (Part No: T23170)
$11.85

Hub - For tractor models 300, 301, 400, 401, 1020, 1120, 1520, 1530, 2010, 2020, 2030, 2040, 2120, 2240, 2630, 2640, 302, 820, 830, 920, 2440 serial number under 340999. Hub, 6 Bolt. Uses wheel bolt # WB916 9/16-18 x 1.69 inch. (Part No: T25809)
$55.20

Hub, Front Wheel, 6 Bolt - 6 Bolt Hub uses p/n WBKJD3 wheel bearing kit and p/n WB916 Bolt set (available separately). Fits 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2155, 2240, 2255, 2350 (Low profile), 2355 (Mid-Hi axle), 2355N, 2550, 2555 (Mid-Hi axle), 2755(Mid-Hi axle), 820, 830, 840. (Part No: R47076)
$54.91

Power Steering Column Repair Kit - Used on John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 3030, 3120, 3130, 820, (3 cylinder) 830 (3 cylinder), 940, this kit repairs columns on tractors with Power Steering. Replaces John Deere part numbers AT315816, AT26188 (Part No: AT315816)
$50.25

Power Steering Fill Hole Plug - For 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830. Power Steering Fill Hole Plug, Metal. Replaces OEM part numbers F1676R and 22050X. (Part No: R2480)
$9.98

Power Steering Shaft - This Power Steering Shaft is used on John Deere 820, 830, 1020, 1520, 2020, 1030, 1530, 2030, 2130, 2630, 2040, 2240, 2640, 2150, 2350, 2155, 2355, 300, 400, 310, 401, 302. Replaces L29199 (Part No: L29199)
$118.50

Power Steering Valve Tie Rod - This Power steering valve tie rod measures 5.625 inches (136.25mm) Center to Center, an Inside Diameter of 0.624 inch (15.86mm) on one side and 0.75 inch (19mm) on the other side. Used on 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, 300 Indust/Const, 301 Indust/Const, 310 Indust/Const, 400 Indust/Const, 401 Indust/Const, 820, 830 It replaces original part number T25324 (Part No: T25324)
$82.73

Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Part No: T21539)
$10.79

Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces M2282T (Part No: M2282T)
$4.50

Spindle LH/RH - Vertical shaft length 11.875 inches, shaft diameter 1.375 inches, spindle inside bearing flat 1.375 inch, spindle outside bearing flat .842 inch. Keyway is to the rear. REPLACES: AR52861. Fits 1020, 1520, 1530, 2020 (swept back), 2030, 2040, 2240, 2440 (< serial number 340999), 2630, 2640 (< serial number 340999), 820, 830. Wheel Bearing Kit available separately part number WBKJD3. Replaces AR103472, AR52861. (Part No: AR103472)
$162.10

Spindle LH/RH - Measures A = 9.875 inch, B = 1.375 inch C = 1.375 inch, D =.842 inch. REPLACES OEM numbers: AR52862, AR58608. Fits: 1020 and 1520 (swept back), 1530, 1641, 1641F, 2020 (swept back), 2030 (< serial number 187300), 2040, 2240, 820, 830. Wheel Bearing Kit available separately as part number WBKJD3. (Part No: AR103473)
$194.43

Spindle LH/RH - Measures A = 11.875", B = 1.375", C = 1.375", D =.842" REPLACES OEM numbers : AR49589, AT23636. Fits:1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2040, 2120, 2150, 2155 (mid-hi axle), 2250 (swept back), 2350 (low profile), 2355(mid-hi axle), 2450, 2550, 2555 (mid-hi axle), 2755 (mid-hi axle), 820, 830, 840, 920, 930, 940, 1035. Wheel Bearing kit available separately as p/n WBKJD3. (Part No: AR58606)
$167.92

Spindle Thrust Bearing - This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Part No: JD8407)
$8.69

Spindle Thrust Washer - This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces M2283T (Part No: M2283T)
$1.85

Steering Arm, LH - For tractor models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Part No: T21518)
$141.15

Steering Arm Pin, Center - 1.249" diameter, 5.230" long. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Used with AT52868, AT52867, AT19793, AR93359, AR93358 and AT19794 center steering arms. Please check dimensions before ordering. (Part No: 93358S)
$41.57

Steering Arm, RH - For tractor models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Part No: T21517)
$141.15

Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, 3-1/2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 & up, 4000, 4020 serial number 201000 & up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Part No: T22875)
$37.50

Steering Wheel - 18" diameter, 7/8" splined hub, American Made Rubber, shiny bake-o-light. For tractor models 520 SN# 5208100 & up, 530, 620 SN# 6213100 & up, 630, 720 SN# 7214900 & up, 730, 820 SN# 8203100, 830. All with power steering. (Part No: AF3856R-R)
$69.00

Steering Wheel - For A, B, D, G, R, 50, 60, 70, 80, 520, 620, 630, 720, 730, (820 Diesel (2 CYL) With Power Steering). Steering Wheel 17 5/8" Diameter, 13/16" Keyed Hub. 2447R (Part No: AA380R)
$42.78

Steering Wheel - For R, 70, 720, 80, 820 Without Power Steering. Steering Wheel, 20" Diameter, 4 Spokes, 11/16" Keyed Hub. (Part No: AR505R)
$40.42

Steering Wheel - This steering wheel is for tractor models 520, 530, 620, 630, 720, 730, 80, 820, 830 with Power Steering. 18" Diameter, 7/8" Splined Hub, Plastic Covered Foreign made. 2 7/16 cap opening. (Part No: AF3856R-P)
$44.87

Steering Wheel Acorn Nut - Stainless steel. For tractor models 50 SN# 20400 and above, 60 SN# 37000 and above, 70 SN# 13000, and above, 520 SN# 8099 and below, 620 SN# 13099 and below, 720 SN# 14899 and below, 80, 820 SN# 3099 and below. (Part No: F1745R)
$14.25

Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Part No: AL155227)
$42.78

Steering Wheel Cap - For tractor models 320, 330, (420 with slant steering to SN# 139999), 430, 435, (520 from SN# 5208100 with power steering), (530, 630, 730 with power steering), (830 2-cyl with power steering), (620 from SN# 6213100 with power steering), (720 from SN# 7214900 with power steering), (820 2-cyl from SN# 8203100 with power steering). Replaces AL155227, F3629R (Part No: R3859)
$65.55

Steering Wheel Cap - For 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 820, 830 without Power Steering. Replaces OEM3630, F3630R (Part No: R4266)
$69.69

Steering Wheel Cap, Black Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Part No: R26673)
$64.17

Steering Wheel Cap, White Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Part No: JDS338)
$53.13

Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Part No: 353435X1)
$0.48

Steering Wheel Plate - Fits John Deere 50 SN# #5020400 & up, 60 SN# #6037000 & up, 70 SN# #7013000 & up, 520 up to SN# #5208099, 620 up to SN# #6213099, 720 up to SN# #7214899, 80 & 820 up to SN# #8203099 (All with Power Steering), Replaces #F1744R (Part No: F1744R)
$12.75

Tie Rod, Inner - Inner Tie Rod. 1-1/8" inner diameter, 5-3/4" to center of post. For JD JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641F, 1840, 2020, 2120, 2150, 2240, 2255, 2440, 2630, 2640, 301A, 302, 401B, 820, 830, 840, 920, 930, 940 tractors (Part No: AT27130)
$45.58

Tie Rod Outer - Tie rod tube, 12.25 long, .781 wide, 11 notches for outer drilled tie rod end. For adjustable front axles except 88 wide or power drive. Tractors: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 low profile, 4320. For 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Replaces AT23885 (Part No: AT23885)
$44.49

Tie Rod Outer - Tie rod end, outer, notched (8), 9-1/4 to center of post. Swept back adjustable front axles. Use with 1-1/8 I.D. inner end, 44 to 66 on Models: 2020, 2030. Also for tractors with 16.1 rear tires. Models: 820, 830, 1530, (2040, 2240 to SN# 349999). (Part No: TP-AT27131)
$65.00

Tie Rod, Outer, 8 Notch - A= 9.250", B= .781". For tractor models 1020, 1120, 1130, 1140, 1530, 1630, 1641F, 2020, 2030, 2040, 2120, 2150, 2240, 2255, 820, 830, 920, 940, 1030. (Part No: AT27131)
$59.68

Tie Rod Right Hand - Tie rod end, outer, threaded, right handed threads, 3-3/8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on d For 520, 530, 620, 630, 720, 730, 820, 830 (Part No: TP-AR21944)
$18.03

Tie Rod Tube - 11.156" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 820, 830, 840, 920, 930, 1020, 1030, 1040, 1120, 1140, 1350, 1530, 1550, 1750, 1950N, 2020, 2030, 2040, 2150, 2155, 2240, 2355N, 2440, 2630, 2640, 2855N, 301A, 302, 401B, (JD300, JD400 SN# 118105 and up), JD301, JD401. (Part No: T25901)
$20.24

Tie Rod Tube - This Tie Rod Tube measures: 7.920 inches long, 0.812 inches inside diameter, 1.125 inch - 12 thread outside diameter. It is used on 1020, 1030, 1040, 1120, 1140, 1530, 1630, 1641F, 1750, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2355N, 2630, 820 (3 Cyl), 830(3 Cyl), 920. Replaces T29106 (Part No: T29106)
$16.64

Wheel Bearing Kit - For 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830, (2440 SN# up to 340999). Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n LM48548(Cone), LM48510(Cup), M12649(Cone), M12610(Cup), AT10344(Seal has 1/075 I.D.). (Part No: WBKJD3)
$23.99

Wheels
Front Wheel Bearing Kit - Wheel bearing kit. Contains one each: LM48510(Cup), LM48548(Cone), M12610(Cup), M12649(Cone), AR49592(Seal). For tractor models 820 Mannheim serial number 042925 and up, 830 Mannheim with R47076 hub, 2040, 2240. For 2040, 2240, 820, 830. Repairs one wheel. (Part No: FW160S)
$23.73

Hub Cap - This is a press in hub cap. It is used With R47076, T25809 and T21543 Front Wheel Hubs. Fits John Deere Models 820 (After Serial Number 042925), 830 (Non-Utility), 920 (After Serial Number 042925), 940, 1020 (After Serial Number 042925), 1030 (w/Standard Front Axle), 1040, 1120 (After Serial Number 042925), 1130 (w/Standard Front Axle), 1140, 1630 (w/Standard Front Axle), 1640 (Low Type), 2020 (After Serial Number 042925), 2040 (After Serial Number 350000), 2120 (After Serial Number 042925), 2150 (Non-General Purpose), 2155, 2255, 2355N, 2240, 2350 (Low Type), 2355 (w/Standard Front Axle), 2550 (Low Type), 2555 (w/Standard Front Axle), 2755 (w/Standard Front Axle), 2855N (w/Standard Front Axle) Replaces N52048 (Part No: T12688)
$5.31

Wheel Bearing Kit - For 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2040, 2120, 2150, 2155, 2240, 2250, 820, 830, 940, 2350 Lowprofile, (2344, 2555, 2755 all mid-hi axle), 2255 swept back. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n LM48548 (Cone), LM48510(Cup), M12649(Cone), M12610(Cup), 23342(Seal has 2.361 I.D.). (Part No: WBKJD2)
$18.62



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$40.58

Cooling System
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$70.77

Radiator Drain Tap - This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. This is 1/4 inch NPT 18 thread. Please verify size and thread count before ordering. Replaces: AM2780T, AM292T, AT13740. (Part No: C9NN8115A)
$3.36

Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black & silver, vinyl cut. (Part No: R4697)
$9.77

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black & yellow, vinyl cut. (Part No: R4696)
$9.77

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 2" x 2 1/2", black & yellow, vinyl cut (Part No: R4695)
$9.77

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Part No: R5186)
$16.28

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Part No: R5187)
$16.28

2 Legged Deer Decal - John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Part No: R5188)
$25.94

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Part No: R5189)
$16.28

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Part No: R5184)
$33.52

4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Part No: R5185)
$33.52

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$86.46

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$13.67

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$12.29

Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

Battery Thermal Wrap - 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.47

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt without the resistor. Replaces: AA4879R, AA4983R (Part No: D5TE12029AB)
$9.65

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Part No: 1006501)
$50.88

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

Spark Plug - Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.12

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$2.85

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$7.97

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$11.10

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89051C)
$117.23

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$152.21

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$129.84

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

Chrome Exhaust System - This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$85.96

Muffler Clamp, 1-1/2 - New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.39

Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.99

Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.18

Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Muffler Clamp, 2-3/8 - New Clamp for 2-3/8 inch outside diameter muffler inlet. (Part No: MC238)
$2.84

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4 - New Clamp for 3-1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2 - New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$6.51

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$7.25

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$6.69

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.02

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$9.39

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$10.34

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$9.39

Stainless Steel Clamp, 2.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

Stainless Steel Clamp, 3.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.42

Fuel System / Air Intake
Carburetor Elbow & Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$4.83

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$37.65

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.90

Marvel-Schebler Service Manual - This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.95

Gaskets
Gasket Material, Cork Rubber - 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$3.08

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.95

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.88

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.68

Temperature Gauge, Universal - Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Hitch / Drawbar
HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

Hitch Ball 10000LB 2-5/16 - 2-5/16 inch ball size, 1-1/4 inch stud thread, 2-1/2 inch stud length, 10000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516114)
$23.85

Hitch Ball 15000LB 2-5/16 - 2-5/16 inch ball size, 1-3/8 inch stud thread, 2-5/8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516138_)
$25.04

Hitch Ball 2000LB - 1-7/8 ball size, 3/4 stud thread, 1-3/4 stud length, 2000 LB MAX LOAD CAPACIRY, ONE CHROME hitch ball class. (Part No: CHB17834)
$13.37

Hitch Ball 3500LB - Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

Hitch Ball 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

Hitch Ball 5000LB 2-5/16 - Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Linch Pins, Pack of 10 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Linch Pins, Pack of 10 - Package of 10 linch pins. 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Enter 1 for package of 10. (Part No: DKLP91)
$3.15

Linch Pins, Pack of 10 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$247.02

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

Universal Stabilizer Chain Kit - Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$63.65

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Nuts (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

HUB with BRG CUPS - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)
$109.42

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Tail Wheel Assembly - 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Miscellaneous
Cab Foam Kit - With Headliner 7-Piece - Black For tractor models with 1300 Series Hiniker Cab (Part No: R1235)
$294.33

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236)
$346.95

Cab Foam Kit - 7-Piece - Black For tractor models with Hinson Cab. (Part No: R3247)
$333.80

Canopy - 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

Canopy, Small Tractors - 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

Deluxe Canopy, 3 Bow - This UNIVERSAL Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100B)
$192.01

Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$155.22

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

Acrylic Hardener, 16oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$42.20

Acrylic Hardener, 8oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$19.46

Alumimum Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$34.83

Black Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$49.02

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447GAL)
$58.92

Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$21.99

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447SP)
$44.19

Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550GAL)
$44.00

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550SP)
$44.19

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$44.00

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700QT)
$20.58

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP)
$44.19

Paint, Green, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP210GAL)
$49.10

Paint, Green, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP210QT)
$20.72

Paint, Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP210SP)
$58.95

Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP530GAL)
$69.35

Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP530QT)
$31.49