FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 2510 Tractor Parts

[Categories] [All John Deere Models] [Print]

Belts

Belt - Alternator - For John Deere tractor models 820 (Fan), 830 (Fan), 856 (Fan), 2010 (Fan), 2040 (Fan), 2150 (Fan), 2155 (Fan), 2240 (Fan), 2250 (Fan), 2255 (Fan), 2305 (Fan), 2355 (AC), 2440 (Fan), 2510 (Fan), 2520 (Fan), 2550 (AC), 2555 (AC), 2630 (Fan), 2640 (Fan), 2750 (AC), 2755 (AC), 2840 (Fan), 2855 (Fan), 2940 (AC), 2950 (AC), 2955 (AC), 3010 (Fan), 3010 (Alternator/Generator), 3020 (Fan), 3020 (Alternator/Generator), 3055 (AC), 3055 (Fan), 3150 (AC), 3150 (Fan), 3155 (AC), 3155 (Fan), 3255 (AC), 3255 (Fan), 4000 (Fan), 4000 (Alternator/Generator), 4010 (Fan), 4010 (Alternator/Generator), 4020 (AC), 4020 (Fan), 4020 (Alternator/Generator), 4030 (AC), 4030 (Fan), 4040 (AC), 4040 (Fan), 4050 (AC), 4050 (Fan), 4055 (AC), 4055 (Fan), 4230 (AC), 4230 (Fan), 4240 (AC), 4240 (Fan), 4250 (AC), 4250 (Fan), 4255 (AC), 4255 (Fan), 4320 (Fan), 4430 (AC), 4440 (AC), 4450 (AC), 4455 (AC), 4520 (AC), 4555 (AC), 4560 (AC), 4620 (AC), 4630 (AC), 4640 (AC), 4650 (AC), 4755 (AC), 4760 (AC), 4840 (AC), 4850 (AC), 4955 (AC), 4960 (AC), 4960 (Fan), 5010 (AC), 5010 (Fan), 5020 (AC), 5020 (Fan), 5103 (Fan), 5105 (Fan), 5200 (AC), 5200 (Fan), 5203 (Fan), 5205 (Fan), 5210 (Fan), 5220 (AC), 5220 (Fan), 5225 (Fan), 5303 (Fan), 5310 (AC), 5310 (Fan), 5320 (AC), 5320 (Fan), 5400 (AC), 5400 (Fan), 5403 (Fan), 5410 (Fan), 5420 (AC), 5420 (Fan), 5425 (Fan), 5500 (AC), 5500 (Fan), 5510 (Fan), 5520 (Fan), 5525 (Fan), 6030 (AC), 6030 (Fan), 6110 (Fan), 6200 (AC), 6200 (Fan), 6300 (AC), 6300 (Fan), 6400 (AC), 6400 (Fan), 7020 (AC), 7020 (Fan), 7200 (Fan), 7210 (Fan), 7400 (Fan), 7405 (Fan), 7410 (Fan), 7510 (Fan), 7520 (AC), 7520 (Fan), 7600 (Fan), 7610 (Fan), 7700 (Fan), 7710 (Fan), 7800 (Fan), 7810 (Fan), 8100 (AC), 8110 (Fan), 8120 (Fan), 8200 (AC), 8210 (Fan), 8220 (Fan), 8300 (AC), 8300 (Fan), 8310 (AC), 8310 (Fan), 8320 (Fan), 8400 (AC), 8400 (Fan), 8410 (AC), 8410 (Fan), 8420 (Fan), 8430 (AC), 8430 (Fan), 8440 (AC), 8440 (Fan), 8450 (AC), 8450 (Fan), 8520 (Fan), 8560 (AC), 8560 (Fan), 8570 (AC), 8570 (Fan), 8630 (Fan), 8640 (AC), 8640 (Fan), 8650 (AC), 8650 (Fan), 8760 (AC), 8760 (Fan), 8770 (AC), 8770 (Fan), 8850 (AC), 8850 (Fan), 8870 (AC), 8870 (Fan), 8960 (AC), 8960 (Fan), 8970 (Fan), 8970 (Alternator/Generator), 9100 (Fan), 9120 (Fan), 9200 (Fan), 9220 (Fan), 9300 (Fan), 9320 (Fan), 9400 (Fan), 9420 (Fan), 9520 (Fan), Compatible with John Deere Combine (s) 9600, Compatible with John Deere Harvester (s) 9950, 9960, 9965, Compatible with John Deere Construction and industrial models 301A (Fan), 302A (Fan), 401 (Fan), 401B (Fan), 401C (Fan), 401D (Fan), Replaces John Deere OEM number R73189, 17435, 17432, OC 1/2" x 43.25", Thickness .331", (Item #: 122454) $6.30

Belt - Fan - For John Deere tractor models 2030 (Gas), 2510, 2520, 2630, 2640, Replaces John Deere OEM number 22515, 22514, HB0515, T24473, Color: Black, Length: 52.25", Width: 0.688", Thickness: 0.438", Material: Polyester Cord, Type: REL (Raw Edge Laminate), Hydraulic pump coupler bushings (4) use Item #: 113925, (Item #: 122103) $14.90

Brakes

Brake Disc - For John Deere tractor models 2510 (Row Crop), 2520 (Row Crop), Compatible with John Deere Construction and industrial models 540B, Replaces John Deere OEM number R38615, R38073, R73644, 13-1/8" Diameter, 15 Teeth, 2.850" Minor Inside Diameter, 3.575" Major Inside Diameter, (Item #: 160779) $103.00

Brake Operating Rod Guide - For John Deere tractor models 2510, 2520, 3020, 4000, 4010 (s/n 20200-later), 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020, 7520, 8430 (Model Year 1974-1981), 8440, 8450, 8460, 8520, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Replaces John Deere OEM number R52169, R31457, (Item #: 170005) $19.60

Brake Pad - For John Deere tractor models 2510, 2520, Replaces John Deere OEM number R90090, AR38048, R38024, Requires 4 Rivets - Not Included, For rivets use Item #: 111444, (Item #: 111362) $30.00

Brake Pad - For John Deere tractor models 2510, 2520, 3010, 3020 (s/n 122999-earlier), 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, Compatible with John Deere Harvester (s) 9940, 9950, Replaces John Deere OEM number AR28487, R26969, R90085, 2-1/2" X 6-1/2", Mounting rivets not included, 6 pads required per side, 12 total for tractor, (Item #: 165736) $18.90

Brake Pad Rivets - For John Deere tractor models 510, 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4350, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 7520, 8430, 8440, 8450, 8640, 8650, 8850, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 444C, 444CH, 500, 510, 540, 540B, 544A, 570, 570A, 600, 640, 644, 646, 646B, 646C, 740, 743, 743A, 762, 762A, Replaces John Deere OEM number R708R, 38B307, Pack of 18, 0.135" Diameter, 1.171" (1 11/64") long, (Item #: 111445) $6.70

Brake Pad Rivets - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Compatible with John Deere Construction and industrial models 340D, 440, 440A, 440B, 440C, 440D, 444C, 444CH, 448D, 500, 500A, 500B, 500C, 510, 540A, 540B, 544, 544A, 544B, 570, 570A, 570B, 600, 640, 643, 644, 644A, 644B, 644C, 646, 646B, 646C, 700, 740, 743, 743A, 760, 760A, 762, 762A, 770, 770A, 772A, 860, Replaces John Deere OEM number D1761R, D1761, Length: 0.481", Width: 0.182", Package of 36, Most brake pads require 6 rivets per pad, (Item #: 189180) $7.50

$John Deere 2510 Brake Pads for Disc\Rotor Type Brakes$
Brake Pads for Disc/Rotor Type Brakes - For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4320, 4440. Brake Pads for Disc/Rotor Type Brakes. Metal Backing. Price show is for each. 2.5 inch x 6.5 inch Pad. (Item #: 105607, Ref: AR28487) $16.60

Brake Pedal Bushing - This bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. For the following models: 820 (3cylinder), 830 (3cylinder), 1020, 1030, 1520, 1530, 1630, 2020, 2030, 2040 (serial number 430000 and up, 2040 (Utility serial number 350000 and up), 2130, 2150, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520. (Item #: 126142, Ref: B177R) $7.70

Brake Pedal - Left Hand, Used - For John Deere tractor models 2510, 3010 (s/n 019800-later), 3020, 4010 (s/n 020200-later), 4020, Replaces John Deere OEM nos AR33976, Replaces John Deere Casting nos R34532, R31503, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439219) $25.01

Brake Pedal - Right Hand, Used - For John Deere tractor models 600, 2510, 3010, 3020, 4010, 4020, Compatible with John Deere Construction and industrial models 500 (s/n 123113-earlier), Replaces John Deere OEM nos AR33975, Replaces Casting nos R31502, R34531, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439220) $49.01

Brake Piston and Pad Assembly, Used - For John Deere tractor models 2510, 2520, Compatible with John Deere Construction and industrial models 544, 544A, Replaces John Deere OEM nos AR38213, AR38778, R38021, Piston Diameter: 1.500", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439221) $34.01

Brake Plate, Used - For John Deere tractor models 2510, 2520, 3020, 4030, Compatible with John Deere Harvester(s) 9940, 9950, Replaces John Deere OEM number R33816, Diameter: 13-1/4", Teeth: 16, Use With Sunshaft R49427, For a new version of this item use Item #: 110540, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410540) $35.01

Brake Plate, Used - For John Deere tractor models 2510, 2520, 3020, Replaces John Deere OEM nos AR93366, AR32483, AR51801, AR68265, Marked R33813, R38072, R48576, R64066, R79410, Check casting No. and verify brake pad dimensions., Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498999) $55.01

No
Picture
Brake Valve - For John Deere tractor models 2510, 2520, 3010, 3020 (s/n 122999), 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (s/n 024999), 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Harvester (s) 9940, 9950, Replaces John Deere OEM number R26369, (Item #: 117229) $4.40

Brake Valve Assembly, Remanufactured, AR42400, R31454 - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 510B, 570, 570A, 600, 700, Replaces John Deere OEM number AR42400, Replaces Casting number R31454, (Item #: 205168) $1150.01

Brake Valve Assembly, Remanufactured, AR42400, R42007, R67309, R67313 - For John Deere tractor models 500, 510, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 510B, 570, 570A, 600, 700, Replaces John Deere OEM number AR42400, Replaces Casting number R42007, R67309, R67313, (Item #: 205174) $942.01

Brake Valve Assembly, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 510, 570, 600, 700, Replaces John Deere OEM number AR42400, Replaces John Deere Casting nos R31454, R42007, For a Remanufactured version of this part use Item #: 205168, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405168) $415.01

Brake Valve Assembly, Used - For John Deere tractor models 500, 510, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 510B, 570, 570A, 600, 700, Replaces John Deere OEM number AR42400, Replaces Casting nos R42007, R67309, R67313, For a Remanufactured version of this part use Item #: 205174, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405174) $410.01

Planetary Brake Clutch Pack Plate - 4th - For John Deere tractor models 2510, 2520, 3020, 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440 (All With Powershift Transmission), Replaces John Deere OEM number R48235, AE52288, R33871, R33873, O.D.: 11.600", I.D: 9.710", (Item #: 127089) $54.00

Planetary Brakes Clutch Pack Plate - For John Deere tractor models 2510 (With Powershift 2 or 3 Plate Clutch), 2520 (With Powershift 2 or 3 Plate Clutch), 3020, 4000 (s/n 201000-later), 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455 (All With Powershift Transmission), Replaces John Deere OEM number R48236, R33872, O.D.: 11.620", I.D.: 9.700", (Item #: 117041) $44.40

Clutch

No
Picture
Clutch Alignment Tool - 1-1/16" 16 spline, 1-11/16" 16 spline, .67" pilot. For tractor models 2510, 3010, 2520, 3020. (Item #: 114666, Ref: S.70914) $20.20

Clutch Bearing - Release bearing for Models 1010, 2510, 2520, 3020, 40, 4000, 4010, 4020, 420 INDUST/CONST, 430 INDUST/CONST, 4320 COMPACT TRACTOR, 440 SKIDDER, 450 RIDING MOWER, 450B INDUST/CONST, 450C INDUST/CONST, 450D INDUST/CONST, 450E INDUST/CONST, 450G INDUST/CONST, 455, M, MT. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces AM3983T. (Item #: 107007, Ref: N1087) $20.70

No
Picture
Clutch Disc - For John Deere tractor models 2510, 2520, Replaces John Deere OEM number RE29773, AR38498, Clutch Size: 11", Clutch Hub: 1-1/16", Clutch Spline: 16, Clutch Center: Solid, Clutch Type: Woven, (Item #: 114018) $156.00

No
Picture
Clutch Disc - For John Deere tractor models 2510, 2520, Replaces John Deere OEM number RE29773HD, 185288TB5, 5 Pad, Shaft: 1-1⁄16", Spline: 16, (Item #: 166378) $136.00

Clutch Pedal Return Spring - For John Deere tractor models 2510, 3010, 3020, 4010, 4020, Replaces John Deere OEM number R26833, Length 2.938, O.D. 0.938, (Item #: 126156) $9.40

Clutch Pedal Return Spring - For John Deere tractor models 2010, 2510 (With Powershift), 2520, 3020 (With Powershift), 4020 (With Powershift), 4030, 4040, 4230, 4240, 4430, 4440, 4520, 4620, 4630, 4640, 8430, 8630, Replaces John Deere OEM number R43684, R33179, Length 7.520", O.D. 1.161, (Item #: 126157) $12.60

Clutch PTO Plate Return Spring - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 7020, Compatible with John Deere Construction and industrial models 500, 500C, 600, Replaces John Deere OEM number R26659, R48618, Sold Each, (Item #: 114093) $2.40

Clutch Valve Housing, Used - For John Deere tractor models 500, 600, 2510, 2520, 4000, 4020, 4040 (s/n 001919-earlier), 4230, 4240 (s/n 004111-earlier), 4430, 4440 (s/n 008895-earlier), 4630, 4640 (s/n 004942-earlier), 4840 (s/n 002950-earlier), Compatible with John Deere Construction and industrial models 500, 570, 570A, Replaces John Deere OEM nos AR45381, Replaces Casting nos R41151, R33155, R33161, R41153, R41668, R44164, Power Shift, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441114) $278.01

Pilot Bearing - .6693" I.D. For tractor models 1010, 1020, 105, (1120 Canada single ind. PTO), (1130 Europe single ind. PTO), 1520, 1530, 2010, 2020, 2030, 2040, (2150 reverser), (2155 reverser), 2240, (2355 reverser), 2440, 2510, 2520, (2555 reverser), 2630, 2640. Replaces JD9449, JD8504, AA61722, AT23188, JD29980, JD7180, JD8535 (Item #: 107933, Ref: C5NN7600A) $3.50

Pressure Plate Assembly, Remanufactured - For John Deere tractor models 2510, 2520, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 205832) $108.80

No
Picture
Release Bearing - For tractor models 2510, 2520, 3010, 3020. (Item #: 121891, Ref: TP-AR41794) $25.70

Release Bearing - I.D. 2.557", O.D. 3.936", Thickness .704". For tractor models 1450, 1650, 2510, 2520, 3010, 3020, 5010, 5020, 5200, 5210, 5215, 5220, 5300, 5310, 5315, 5320, 5400, 5403, 5410, 5415, 5420, 5500, 5510, 5515, 5520, 5605, 5615, 5705, 5715, 6030, 7520. (Item #: 107477, Ref: AR26845) $32.60

No
Picture
Ring - For John Deere tractor models 600, 1020, 1030, 1035, 1120, 1130, 1520, 1530, 1630, 1635, 1830, 2020, 2030, 2035, 2130, 2135, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3020, 3030, 3120, 3130, 3135, 4000, 4020, 4040, 4230, 4240, 4440, Compatible with John Deere Construction and industrial models 300, 301, 401, 410C, 440, 440A, 440B, 500, 500A, 500B, 500C, 510, 510C, 540, 540A, 540B, 570, 570A, 570B, 600, 610B, 610C, 710B, 710C, 710D, Replaces John Deere OEM number R26753, (Item #: 165737) $0.10

Transmission Clutch Fork, Used - For John Deere tractor models 2510, 2520, 3020, Replaces John Deere OEM nos AR32140, Replaces John Deere Casting nos R33195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430091) $117.01

Transmission Rear Clutch Pack Plate - For John Deere tractor models 1020, 1520, 2020, 2030 (All With Reverser Transmission), 2155 (With Directional Reverser Transmission), 2240 (s/n 350000-later), 2355 (With Directional Reverser Transmission), 2510 (With Powershift Hi Range), 2520 (Powershift With 2 or 3 Plate Clutch), 2555 (With Reverser Transmission), 2630 (With Reverser Transmission), 3020 (Powershift), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4230 (s/n 028121-later), Replaces John Deere OEM number R57345, R39325, R32313, R49129, O.D.: 6.93" (176mm), I.D: 4.75" (120mm), 6 Tabs, (Item #: 127084) $18.30

Cooling System

Bearing - Water Pump Shaft - For John Deere tractor models 1020, 1520, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 3020 (s/n 122999-earlier), 4020 (s/n 200999-earlier), 4040, 4230, 4320, 4430, 4520, 4620, 4630, 4640 (s/n 211131-earlier), 4840 (s/n 211131-earlier), 5010, 5020 (s/n 024999-earlier), 6030, 7020 (s/n 335845-earlier), 8430, 8440 (s/n 211131-earlier), Compatible with John Deere Combine (s) 925, 935, 945, 955, 965, 968, 1032, 1042, 1052, 1055, 3300, 4400, 4420, 6600, Compatible with John Deere Construction and industrial models 350, 350B (s/n 168350-earlier), 450, 450B (s/n 168638-earlier), 450B (s/n 323694-earlier), 500, 600, 644 (s/n 323694-earlier), 644A (s/n 323694-earlier), 760, Replaces John Deere OEM number JD9257, Overall Length: 5.75", Shaft Size: .746", O.D.: 1.50", (Item #: 140541) $23.90

Fan Blade - 6 - For John Deere tractor models 2510, 2520, Replaces John Deere OEM number AR38790, 16" Diameter, 1-1/2" Pilot Hole, Mounting Holes on 1-3/4" Centers, (Item #: 163825) $120.00

Radiator - For 2510, 2520, 4219DF, 4276D. Radiator. (Item #: 119610, Ref: AR38551) $430.00

Radiator Cap - For tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630. Also replaces AR28482. (Item #: 125561, Ref: R27209) $20.00

$John Deere 2510 Radiator Hose - Bulk 10ft x 1\2 inch$
Radiator Hose - Bulk 10ft x 1/2" - For John Deere tractor models 350, 420, 430, 450, 500, 1010, 2010, 2510, 2520, 3010, 3020 (s/n 122999-earlier), 4040, 4240, 4440, 4520, 4620, 5085M, 5100M, 5220, 5320, 5420, 5520, Compatible with John Deere Construction and industrial models 70, 210C, 290D, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 315D, 350A, 350B, 350C, 380, 400G, 401B, 401C, 410, 440, 440A, 440B, 450B, 450C, 450D, 455D, 480A, 480B, 482, 482C, 485E, 486E, 488E, 500A (s/n 123113-earlier), Compatible with John Deere Hay Cutting (s) 2320, 2420, 3430, 3830, 4890, 4895, Replaces John Deere OEM number R31543, T11171, TY22562, R32641, R33678, T12397, T12815, T438T, T592T, I.D. (A): 1/2", O.D.: 27/32", Length: 10', Fits Engines: 3164D, 4219DF, 4239D, 4239T, 4039, 4045, 4239D, 4239T, 4239A, 3179DF, 3179TF, 4045HLV68, 4045HLV70, For Hose Clamp use Item #: 130452, (Item #: 150857) $22.40

$John Deere 2510 Radiator Hose - Bulk 3 x 2-1\4 inch$
Radiator Hose - Bulk 3 x 2-1/4" - For John Deere tractor models M, MC, MT, 40, 320, 330, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 8440, 8640, Compatible with John Deere Combine (s) 45, 55, 65, Replaces John Deere OEM number R26294, H31009, M263T, H24921, L4577T, N71260, P43392, R26531, R32653, RN268FN, T13149, T209T, Replaces Case IH OEM number 407010R1, I.D. (A): 2-1/4", O.D.: 2-5/8", Length: 3', For Hose Clamp use Item #: 130455, (Item #: 150819) $32.80

Radiator Hose, Lower - Hose, radiator lower for tractors: 2510 gas. For tractor models 105, 2010, 2510, 299, 3010, 3020, 4010, 4020, 5010, 5020, 55, 6600, 6602, 7700, 95, 95H, 99. (Item #: 150843, Ref: R38311) $21.60

Radiator Hose, Lower - Hose, radiator lower for tractors: 2510 diesel, 2520. For 105, 2010, 2510, 299, 3010, 3020, 4010, 4020, 5010, 5020, 55, 6600, 6602, 7700, 95, 95H, 99 (Item #: 159695, Ref: R38313) $17.80

Radiator Hose - Upper - For John Deere tractor models 301, 2510 (Diesel), 2520, Replaces John Deere OEM number R38312, ID: 1.500", For Hose Clamp use Item #: 130452, (Item #: 150799) $11.00

Radiator Hose - Upper - For John Deere tractor model 2510 (Gas), Compatible with John Deere Construction and industrial model 480, Replaces John Deere OEM number TY22409, ID: 1.500", For Hose Clamp use Item #: 130452, (Item #: 150870) $6.60

No
Picture
Thermostat - 192 degree. For tractor models 1020, 1120, 1630, 1830, 2020, 2030, 2040, 2120, 2240, 2440, 2510, 2520, 930. (Item #: 167528, Ref: AT22963) $11.60

Thermostat Housing Bypass Hose - Measuring 0.50 inches inside diameter on both end, this Bypass Hose is used in many John Deere models. Verify size or OEM number T20277 before ordering. (Item #: 125600, Ref: T20277) $9.00

Thermostat Housing Cover - Used on gas engines. For tractor models 1020, 1520, 1830, 2020, 2030, 210C, 2130, 2440, 2510, 2520, 300, 300B, 301, 302, 302A, 310, 310A, 310B, 400, 401, 401B, 401C, 401D, 410. (Item #: 159570, Ref: T20317) $20.60

Water Pump - For tractor models 450, 2510 Gas, 480A and 480B up to Serial Number 193099. Replaces AT29617-R, R29520. Casting# RT29520 Or T23629 (Item #: 118462, Ref: AT29617-R) $153.00

Water Pump - For tractor models JD350, JD350B, JD440, JD440A, JD440B, JD450, JD480A, JD480B, 210C, 310A, 310B, 400G, 401B, 401C, 401D, 410, 450C, 450D, 455D, 480C, 482C, 2510 Diesel, (2030, 2520, both with Gas). Replaces Casting #RT29521, R29521, R55164, T29521, AR65262, RE19717, AT26708, AT21204, AT29620, AT27019. Comes with gasket and pulley. (Item #: 107989, Ref: RE25043) $145.00

Water Pump Gasket - For John Deere tractor models 940, 1040, 1140, 1550, 1640, 1750, 1840, 1850, 2030, 2040, 2140, 2150, 2155, 2210, 2255, 2350, 2355, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2850, 2855, Compatible with John Deere Construction and industrial models 210, Compatible with John Deere Hay Cutting (s) 3430, 3830, (Item #: 155352) $4.10

Water Pump Gasket Pump to Backplate - For John Deere tractor models 2510, 2520, 2630, Compatible with John Deere Construction and industrial models 350, 401, 410, 440 (s/n 50000-later), 440A (s/n 50000-later), 450, 480, Replaces John Deere OEM number T20242, Water Pump to Backplate Gasket, (Item #: 155278) $7.70

No
Picture
Water Pump Hub - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1830, 2020, 2030, 2040, 2120, 2130, 2155, 2240, 2355N, 2440, 2510, 2520, 2640, 5200, 5500, 5500N, Compatible with John Deere Construction and industrial models 300, 301, 301A, 302, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number R30720, R122337, R23631, R23632, R29521, R48992, R48997, R51039, R55164, R59049, R65880, R67188, R97081, Hub is only for following water pumps: R122337, R23631, R23632, R29521, R48992, R48997, R51039, R55164, R59049, R65880, R67188, and R97081, (Item #: 177034) $32.60

Water Pump Impellor - For tractor models 1020, 1120, 1520, 1530, 1640, 2020, 2040, 2040S, 2120, 2440, 2510, 2630, 2640, 3300, 5105, 5205, 5210, 5220, 5310, 5310N, 5320, 5320N, 820, 830, 8875, 920, (2240 SN# 350000 and up), (2140 SN# 430000 and up). (Item #: 123606, Ref: T30897) $16.90

Water Pump Pulley, Bolt On - This Water Pump Pulley is for tractor models 820, 830, 1020, 1520, 2020, 2030, 2510, 2520, 210C, 290D, 300B, 301A, 302, 302A, 310A, 310B, 350, 350B, 350C, 350D, 400G, 401B, 401C, 401D, 410, 440, 440A, 440B, 450, 450B, 450C, 450D, 450E, 455D, 480C, 482C, JD380, JD401, JD480, JD480A, JD480B. Replaces T30721. Bolt on. (Item #: 150383, Ref: T23628) $86.00

Water Pump Seal Kit - This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For models 610C, 624G, 640, 640E, 640G, 644A, 644C, 646, 646B, 646C, 648E, 648G, 655, 655B, 670, 670B, 672B, 690, 690A, 690B, 690ELC, 710B, 710C, 710D, 740, 740A, 740E, 740G, 748E, 750, 750B, 750C, 755, 755A, 755B, 762A, 762B, 790ELC, 850C, 1020, 1520, 1530, 2020, 2030, 2280, 2360, 2420, 2510, 2520, 2630, 3010, 3020. (Item #: 164008, Ref: AR101549) $10.10

Water Pump, with out Cooler Tubes - For tractor models 2030 gas, 210C, 2510 diesel, 2520 gas, (310A, 310B, diesel), 400G, 401B, 401C diesel, 401D, 410 diesel, 450C, 450D, 455D, 480C diesel, 482C, 350, (350B, 440, 440A, 440B all diesel), 450, 450B, 480A, 480B. (Item #: 173137, Ref: R29521) $180.00

Decals and Emblems

Be Careful Plate - This Be Careful Plate is used on John Deere Tractors, 1961-1972. (Item #: 184329, Ref: R4475) $15.60

No
Picture
Decal Set, Complete - For model 2510 model numbers are vinyl cut. (Item #: 183310, Ref: R4702) $57.00

Hood Ornament - For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. (Item #: 108412, Ref: AR28047) $32.20

Side Hood Emblems, OEM Set - 37" in length with 5 mounting studs. Mounting is speed nut type, no threads. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Side molding with RAISED Letters. Includes Right and Left Pair.Replaces: AR28048, AR28049 (Item #: 101968, Ref: R2533) $146.00

Syncro-Range and Power Shift Decal Set - This Mylar set covers those decals that are different than the normally used set when used for the Syncro-Range and Power Shift Models. For 2510, 2520, 3010 before SN# 049999, 3020U, 4000 after SN# 201000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (Item #: 115031, Ref: AR52393) $53.00

Drive Train

Drum, Hi-Low Range - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Item #: 119616, Ref: R31026) $103.00

Drum, Reverse Range - For tractor models 2510, 2520, 3010, 3020, 4010, 4000, 4020. Replaces R31027, R27726 and R52499. (Item #: 124958, Ref: R52499) $89.00

Gear Shift Lever - For tractor models 2510, 2520, 3010, 3020, 4010, 4020, 4000, 4320. Replaces R27633. (Item #: 121581, Ref: R46285) $88.00

Gear Shift Lever, Straight - For tractor models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1830, 2020, 2030, 2120, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750. Knobs available, for BLACK order S.00641, for RED order S.72358, please specify in comments section if needed. Replaces R29936, R53817, T28809, 34H251, AL32791 (Item #: 152054, Ref: AL32791) $31.00

Gear Shift Pivot - This gear shift pivot Fits: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 5010, 5020. 6030 Tractors. It also has applications in industrial applications. It R53247, AR26360, R47203. Pivots Marked R26185 (Item #: 152195, Ref: R53247) $19.60

Idler Gear, Upper, Used - For John Deere tractor models 301, 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2030, 2040, 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 767516-earlier), 3030, 3040 (s/n 430000-later), 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 4030, 4040S, 4240S, 4250, 4450, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 6600, 7200, 7220, 7320, 7400, 7500, 7600, 7700, 7800, Compatible with John Deere Combine(s) 925, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 1032, 1042, 1052, 1055, 1065, 1068, 1072, 1075, 1085 (s/n 041201-later), 1133, 1144, 1155, 1157, 1158, 1165, 1169, 1174, 1174H4, 1175, 1175H4, 1177, 1177H4, 3300, 4400, 4420, 4425, 4435, 6300, 6600, 7300, 7500, 7700, 7700H4, 9400, Compatible with John Deere Skid Steer Loader(s) 24, 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 5420, 5440, 7440, 7445, 7450, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 70, 70D, 190E, 210C, 290D, 300, 300B, 300D, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 340D, 344E, 344G, 350, 350B, 350C, 350D, 355D, 380, 400, 400G, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 440, 440A, 440B, 440C, 440D, 444, 444C, 444CH, 444D, 444E, 444G, 448D, 450, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 482C, 490, 490D, 490E, 493, 493D, 495D, 510B, 510C, 510D, 515B, 540, 540A, 540B, 540D, 540E, 540G, 544, 544A, 544B, 544C, 544D, 544E, 544G, 548D, 548E, 548G, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570, 570A, 570B, 590D, 595, 595D, 610B, 610C, 624E, 624G, 640, 640D, 640E, 640G, 643, 643D, 648D, 648E, 648G, 650G, 653E, 655, 655B, 670, 670A, 670B, 672A, 672B, 690D, 690DR, 690ELC, 693D, 710B, 710C, 710D, 740E, 740G, 748E, 748G, 750, 750B, 750C (s/n 883331-earlier), 755, 755A, 755B, 790ELC, 850C (s/n 883331-earlier), Compatible with John Deere Engine(s) 135, 152, 180, 202, 219, 303, 3029, 3179, 4039, 4039T, 4045, 4045T, 4219, 4239, 4239A, 4239D, 4239T, 4276, 6059, 6059DF092, 6059T, 6068, 6068D, 6068H, 6068T, 6076A, 6076T, 6329D, 6359, 6359D, 6359T, 6414, 6414D, 6414T, 6466D, 6466T, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number AT18009, Replaces Casting nos T20029, Teeth: 55, For a new version of this item use Item #: 123886, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434427) $40.01

Idler Gear, Upper, Used - For John Deere tractor models 301, 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2030, 2040, 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 767516-earlier), 3030, 3040 (s/n 430000-later), 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 4030, 4040S, 4240S, 4250, 4450, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 6600, 7200, 7220, 7320, 7400, 7500, 7600, 7700, 7800, Compatible with John Deere Combine(s) 925, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 1032, 1042, 1052, 1055, 1065, 1068, 1072, 1075, 1085 (s/n 041201-later), 1133, 1144, 1155, 1157, 1158, 1165, 1169, 1174, 1174H4, 1175, 1175H4, 1177, 1177H4, 3300, 4400, 4420, 4425, 4435, 6300, 6600, 7300, 7500, 7700, 7700H4, 9400, Compatible with John Deere Skid Steer Loader(s) 24, 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 5420, 5440, 7440, 7445, 7450, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 70, 70D, 190E, 210C, 290D, 300, 300B, 300D, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 340D, 344E, 344G, 350, 350B, 350C, 350D, 355D, 380, 400, 400G, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 440, 440A, 440B, 440C, 440D, 444, 444C, 444CH, 444D, 444E, 444G, 448D, 450, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 480, 480A, 480B, 480C, 482C, 490, 490D, 490E, 493, 493D, 495D, 510B, 510C, 510D, 515B, 540, 540A, 540B, 540D, 540E, 540G, 544, 544A, 544B, 544C, 544D, 544E, 544G, 548D, 548E, 548G, 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 570, 570A, 570B, 590D, 595, 595D, 610B, 610C, 624E, 624G, 640, 640D, 640E, 640G, 643, 643D, 648D, 648E, 648G, 650G, 653E, 655, 655B, 670, 670A, 670B, 672A, 672B, 690D, 690DR, 690ELC, 693D, 710B, 710C, 710D, 740E, 740G, 748E, 748G, 750, 750B, 750C (s/n 883331-earlier), 755, 755A, 755B, 790ELC, 850C (s/n 883331-earlier), Compatible with John Deere Engine(s) 135, 152, 180, 202, 219, 303, 3029, 3179, 4039, 4039T, 4045, 4045T, 4219, 4239, 4239A, 4239D, 4239T, 4276, 6059, 6059DF092, 6059T, 6068, 6068D, 6068H, 6068T, 6076A, 6076T, 6329D, 6359, 6359D, 6359T, 6414, 6414D, 6414T, 6466D, 6466T, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM nos AR91660, Replaces Casting nos R70182, R100851, Teeth: 55, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442236) $40.01

Idler Gear, Used - For John Deere tractor models 830, 830 (s/n 037143-later), 920 (s/n 037143-later), 930, 1020 (s/n 037143-later), 1030, 1120 (s/n 037143-later), 1130, 1520, 1530, 1630, 1640, 1830, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510 (s/n 082721-later), 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3030, 3040, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 4030, 4050, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 7200, 7400, 7600, Compatible with John Deere Combine(s) 1165 (s/n 45000-earlier), 1175 (s/n 45000-earlier), 3300, 4400, 4420, 4425, 4435, 6600, 9400, Compatible with John Deere Skid Steer Loader(s) 240, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 7440, 7445, 7450, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 210C, 300B, 300D, 310D, 315D, 415B, 515B, Compatible with John Deere Engine(s) 135, 152, 303, 3029, 3179, 4039, 4045, 4219, 4239, 4239D, 4239T, 4276, 6059, 6068, 6068T, 6329D, 6359, 6359D, 6359T, 6414D, 6414T, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2360, 3430 (s/n 809840-earlier), 3830 (s/n 809840-earlier), Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number AT24252, Replaces John Deere Casting nos T26322, Replaces Casting nos 126322, Teeth: 45, For a new version of this item use Item #: 123884, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 423884) $35.01

$John Deere 2510 Low \ High Range Drum, Used$
Low / High Range Drum, Used - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030 (s/n 015963-earlier), 4230 (s/n 037595-earlier), 4320, 4430 (s/n 066737-earlier all with Syncro Range), Compatible with John Deere Construction and industrial models 340D, 440, 440A, 440B, 440C, 440D, 448D, Replaces John Deere OEM number R31026, For a new version of this item use Item #: 119616, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 419616) $45.01

PTO Open Single Row Ball Bearing - For John Deere tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3020 (s/n 123000-later), 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, 500, 600, Replaces John Deere OEM number JD9320, I.D.: 2.559", O.D.: 4.724", Width: .906", (Item #: 121743) $15.30

Shift Collar - For tractor models (2510, 2520, 3010, 3020, 340D, 4000, 4010, 4020, 440D, 448D, JD440, JD440A, JD440B all syncro range), (4030 serial number up to 015963 syncro range), (4230 syncro range up to serial number 037595). Replaces R26074, R33383. (Item #: 127291, Ref: R33383) $90.00

Shift Collar, Reverse Range - For tractor models (2510, 2520, 3020 all with syncro drive). (Item #: 156886, Ref: R33480) $97.00

Synchronizer - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro and quad range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Item #: 150072, Ref: R31028) $105.00

Transmission Drive Shaft - For industrial models: 500, 500A, 500B, 500C, all with collar shift transmission. For tractor models: 2510, 2520, 3020 all with synchro range transmissions. (Item #: 126760, Ref: R33512) $215.00

Transmission Filter - Transmission oil filter. Filter element, cartridge type. Replaces AR28271, AR75601. For tractor models 2510, 3010, 4010, 5010, 80, 820, 1020, 1120, 1520, 2020, 2120, 2520, 3020, 4020, 4320, 4520, 4620, 5020, 7020, 7520, 830, 840, 1530, 2030, 2630, 4030, 4230, 4430, 4630, 6030, 8430, 8630, 2040, 2240, 2640, 2940, 2150, 2350, 2450, 2550. (Item #: 110864, Ref: AR75603) $12.00

Transmission Gear Shift Lever, Used - For John Deere tractor models 2510, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Replaces John Deere OEM nos R27633, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498410) $50.01

Electrical System

Accessory Relay - This accessory relay fits the following tractor models: 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, and 2630. It has 5 pins and is made to accommodate 12 volt systems. Replaces part number: AR74411. (Item #: 115683, Ref: AR74411) $13.50

Battery Box Support Bracket, Rear - LH, Used - For John Deere tractor models 2510, 3020 (s/n 122999-earlier), Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier), Replaces John Deere OEM nos AR32480, Rear - Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435104) $23.76

No
Picture
Battery Cable - 2 used for the diesel. 2 guage, length 71, terminal type 1-3+. For tractor models 2510. (Item #: TP-AR38359) $47.53

Battery Cable - Battery Ground Straps. 2510, 3010D, 3020D, 4010D, 4020D to SN# 2T90999, 5010D to SN# 3T7999. 1 guage, length 10, terminal type Std. For 2510, 3010, 3020, 4010, 4020, 5010 (Item #: 115792, Ref: AR26622) $13.90

Battery Hold Down Clamp - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4520, 4620, Compatible with John Deere Construction and industrial models 500A, 500B, 510, 570, Replaces John Deere OEM number R40423, (Item #: 151928) $12.10

Cab Accessory Relay - 12 Volt cab and accessory relay~ Used on: 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240 tractors~ 2420 windrowers~ 4310 beet harvester~ 85 row crop cultivator. (Item #: 164460, Ref: TP-AR54484) $37.60

Condenser - Condenser. Repalces IBB2042-SS-1.For tractor models using Presto-Lite Distributor. Replaces AT14468 for Tractors using Delco Distributors and replaces AR12000, AT14873 or AT15929 For Wico Distributors. For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W. Balers 40, 45, 55, 65, 95, 105. Combines 99, 299. Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Item #: 111194, Ref: AT14684) $3.30

Condenser - Wico X Magneto - For John Deere tractor models 1010, 1020, 2010, 2020, 2510, 2520, 3020, 3300, 4030, 6600, Compatible with John Deere Combine (s) 45, 55, 95, 105, Compatible with John Deere Harvester (s) 699, Replaces John Deere OEM number AR12013, Replaces Wico manufacturer number X5614, (Item #: 111100) $13.80

Distributor Cap - Prestolite Distributor Cap, clip Type . Fits 3300, 400, 401, 401B, 401C, 410, 450, 480, 480A, 480B, 24A, 440, 440A, 440B, 1010, 2010, 2020, 2030, 2510, 2520 all with one of the following Prestolite distributors: IBT-4101S, IBT-4101 or IBT-4101U. Replaces AT14692, 21A448, A24564. (Item #: 105566, Ref: AT14692) $14.50

Distributor Cap Clip - For John Deere tractor models 1010, 1020, 1520, 2010 (s/n 42001-later), 2020, 2030, 2510, 2520, 4030, Compatible with John Deere Combine (s) 3300, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number AT14679, (Item #: 112081) $24.90

Distributor Dust Cover - For John Deere tractor models 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030, Compatible with John Deere Combine (s) 3300, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number AT14682, Prestolite distributor number (s): IBT4101, IBT4301, IBT6101, (Item #: 109896) $48.80

No
Picture
Distributor Gear - For John Deere tractor models 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030, Compatible with John Deere Combine (s) 3300, Replaces John Deere OEM number AT21722, (Item #: 121767) $72.00

Distributor Point Set - This Point Set is for a WICO DB Distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A (659290-662873)~ For 1010, 1020, 105, 12, 2010, 2020, 215, 215A, 217, 2510, 299, 323W, 40, 45, 50, 55, 600, 65, 700, 95, 99, A, AO, AR, B. (Item #: 113431, Ref: AR12003) $27.08

Distributor Point Set - This Point Set is for a WICO XB distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A (659290-662873. (Item #: 172995, Ref: AR12014) $20.10

Distributor, Rebuilt - Complete remanufactured distributor for John Deere 1010, 2010, 2020, 2030, 2510 with Prestolite distributor IBT4101R IBT-4101R, IBT4101L, IBT-4101L. John Deere part number AT14384. This is a slotted shaft distributor. A refundable $125.00 core charge will be added to your order. (Item #: 205329, Ref: IBT4101R) $342.01

Distributor, Rebuilt - Complete remanufactured distributor for John Deere 2020, 2030, 2510, 2520 with Prestolite distributor IBT4101U IBT-4101U. John Deere part number AT21351. This is a gear driven distributor. A refundable $125.00 core charge will be added to your order. (Item #: 203567, Ref: IBT4101U) $548.01

Electronic Ignition Conversion Kit, 12 volt negative ground - 4-cylinder engine. For Tractor Models 2010 with 145 eng., 1010, 2010, 2020, 2030 with 115, 145, 180, 219 eng., 2030, 2510, 2520 with 180, 202, 203 eng. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. For use on a 12 volt negative ground system with a Prestolite distributor. MUST ALSO REPLACE CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. If you have a dust cap, you are required to enlarge the hole for the new rotor to fit. Used with the following distributors: IBT-4702, IBT-4709, IBT-4707, IBT-4706, IBT-4705, IBT-4701, IBT-4501, IBT-4405, IBT-4404, IBT-4403A, IBT-4105A, IBT-4106A, IBT-4402, IBT-4001G, IBT-4102A (Item #: 105090, Ref: 1542) $180.00

No
Picture
Electronic Ignition Conversion Kit, 12 volt negative ground - For tractor models 1010, 2010, 2030, 2510, 2520 with Distributor number IBT-4101, IBT-4101B, IBT-4101H, IBT-4101L, IBT-4101N, IBT-4101R, IBT-4101S, IBT-4101U. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. For use on a 12 volt Negative ground system. (Item #: 108439, Ref: 1544) $190.00

Electronic Ignition Conversion Kit, 12 volt positive ground - For Tractor Models 2010 with 145 eng., 1010, 2010, 2020, 2030 with 115, 145, 180, 219 eng., 2030, 2510, 2520 with 180, 202, 203 eng. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. For use on a 12 volt positive ground system, use with Prestolite distributor using the "A" type rotor which is "T" Shaped. CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. If you have a dust cap, you are required to enlarge the hole for the new rotor to fit. (Item #: 108152, Ref: 1542P12) $159.00

Ignition Key - Only - For John Deere tractor models A, AO, AR, B, G, 80, 420, 820 (2-Cylinder), 830 (2-Cylinder), 1010, 2010, 2510, 3010, 3020, 4010, 4020, 5010, 5020, 8020 Replaces John Deere OEM number A4700R, , Compatible with Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, Compatible with Massey Ferguson Construction and industrial models 200, Replaces Massey Ferguson OEM number 180292M1, 192427M1, (Item #: 121147) $3.10

Ignition Point Set, Presto-Lite Distributor - Pre-assembled point set For tractor models using Presto-Lite Distributor. Replaces Prestolite IBP2040L. For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W.Balers 40, 45, 55, 65, 95, 105. Combines 99, 299.Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Item #: 111191, Ref: AT21062) $6.90

Ignition Switch - For John Deere tractor models A (Ignition s/n 477000-502231), B (Ignition 325000-later), D (Ignition s/n 143800-188057), 2155, 2350, 2355, 2355N, 2510, 2550, 2555, 2750, 2755, 2855, 2855N, 2950, 2955, 3020 (Ignition s/n 68000-122999), 3055, 3150, 3155, 3255, 4020 (Ignition s/n 91000-200999), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010 (s/n 8000-later), 5020 (Ignition s/n 24999-ealier), 6030, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6415, 6420, 6420L, 6500, 6500L, 6505, 6510, 6510L, 6520, 6520L, 6605, 6615, 6715, 7020, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610 (s/n 89999-earlier), 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (1974-1981), 8440, 8450, 8520, 8520T, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Compatible with John Deere Combine (s) CTS, 4425, 4435, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9500 SH, 9510, 9550, 9550 SH, 9560, 9560 SH, 9560 STS, 9570, 9570 STS, 9600, 9610, 9650, 9650 CTS, 9650 STS, 9660, 9660 CTS, 9660 STS, 9670, 9770 STS, 9860 STS, 9870 STS, Compatible with John Deere Harvester (s) 7440, 7445, 7450, 7455, 9900, 9910, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976, 9986, Compatible with John Deere Construction and industrial models 210C, 300D, 310, 310A, 310B, 310C, 310D, 310E, 310G, 310SE, 310SG, 315C, 315D, 315SE, 350D, 410 (also the ignition switch), 410B, 410C, 410D, 410E, 410G, 450C, 482C, 500 (s/n 68000-later), 500A (s/n 123113-earlier), 500C, 510, 510B, 510C, 510D, 600 (s/n 91000-200999-later), 610B, 610C, 710B, 710C, 710D, 760, 760A, Replaces John Deere OEM number R39554, AR46184, AR47373, AB1837R, (Item #: 121159) $12.40

Ignition Switch with 2 Keys - 6 Terminal. For tractor models 2510, (5010 SN# 008000 and up), (3020 SN# 68000 to 122999), (4020 SN# 91000 to 200999), (520 up to SN# 24999), (JD500 SN# 68000 and up), (JD500A up to SN# 123113), (JD600 SN# 91000 and up). (Item #: 121144, Ref: AR39505) $16.60

Ignition Tune-up Kit Less Rotor - Ignition kit, less rotor. Contains: Points, gauge, condenser. Pre-assembled points using Prestolite distributors. For: 1010, 1020, 2010, 2020, 2510, 323W. Baler; 40, 45, 55, 65, 95, 105. Combines; 99, 299. Cotton Pickers; 12. Forage harvester; 600, 700. Hi-Cycles, TA145, 217 Power Units; 215, 215A windrowers. (Item #: 105563, Ref: ATK11PL) $7.80

Magneto Tune-up Kit - Fits Wico X, XB, XH, XV magnetos Kits contain heavy duty point set, vibration-resistant condensor, and rotor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. (Item #: 105594, Ref: 569632) $47.80

$John Deere 2510 Push Button Starter\Horn Switch, Used$
Push Button Starter/Horn Switch, Used - For John Deere tractor models 530, 630, 730, 830, 2510, 2520, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4630, 4640, 4650, 4760, 4840, 4850, 4960, 5010, 5020, 6030, 7520, 8020, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 7700, Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, Replaces John Deere OEM number AR21823, For a new version of this item use Item #: 121158, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421158) $5.01

Rear Battery Box Support - Left Hand, Used - For John Deere tractor models 2510, 3010 (s/n 049999-earlier), 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier), Replaces John Deere OEM nos AR32503, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434936) $25.01

Rear Battery Box Support - Right Hand, Used - For John Deere tractor models 2510, 3010 (s/n 049999-earlier), 3020 (s/n 122999-earlier), 4010, Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier), Replaces John Deere OEM nos AR32479, Right Hand, Mounting part is 2 3/4" Long, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434935) $31.01

Relay, Cab and Accessory - 12V, 80 amp contact rating relay. For tractor models 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240. (Item #: 164460, Ref: TPAR54484) $37.60

Rotor - Rotor. Replaces Prestolite IBT1016.For tractor models using Presto-Lite Distributor.For tractor models Tractor 1010, 1020, 2010, 2020, 2510, 323W.Balers 40, 45, 55, 65, 95, 105. Combines 99, 299.Cotton pickers 12. Forage harvesters 600, 700. High Cycles TA145. Power Units 217 and Windrowers 215, 215A. (Item #: 111188, Ref: AT14680) $11.90

Rubber Grommet - For John Deere tractor models H, M, MC, MT, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 1350, 1530, 2240, 2440, 2510, 2630, 2640, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 8430, 8630, Replaces John Deere OEM number H987R, M305T, Can be used for hole in spark plug cover, fuel tank pads and electric wire grommet, (Item #: 126661) $2.00

Starter - Replaces; TY1458. For tractor models 920, 1640, 1830, 2840 with 6-239 diesel, 1630, 2240 with 164 diesel, 2440, 2520, 210C, 1840, 1020, 1520, 2000, 1530, 2030, 2040 with 152 diesel, 2510. (Item #: 113951, Ref: TY6702) $200.00

Starter - This is a brand new Delco 10MT type starter. For Gas Applications. It is 12 volt, 10 teeth with clockwise rotation, and has a 2 hole mount. It fits multiple John Deere Tractor and Combine models; 1020, 135 Eng, 1520, 2020, 2510, 2520, 300 Indust/Const, 301 Indust/Const, 301A Indust/Const, 302 Indust/Const, 310 Indust/Const, 310A Indust/Const, 310B Indust/Const, 329G Eng, 3300 Combine, 350 Crawler, 350B Crawler, 350C Crawler, 380 Forklift, 40 Combine, 400 Indust/Const, 401 Indust/Const, 401A Indust/Const, 401B Indust/Const, 401C Indust/Const, 401D Indust/Const, 410 Indust/Const, 45 Combine, 450B Crawler, 480 Forklift, 480A Forklift, 480B Forklift, 480C Forklift, 499 Cotton Picker, 55 Combine, 600 Indust/Const, 600 Sprayer, 600A Sprayer, 6600 Combine, 700, 880 Windrower, 95 Combine. Replaces TS-1172, AM1108319, AR91813, AT18025, SE501435, SE501436, S14211, S14326, TY1465, TY26035, TY6639, TY6706, 10461600, 1107339, 1108319, 1109421, 1109576, 12301485, 1400-0172, 14000172, 323-652, 323652 (Item #: 160375, Ref: TY26037) $200.00

Starter - 12 volt, clockwise rotation, 13 tooth. For tractor models 1350, 1445F, 1550, (1630 1973-82), (1640, 1640F SN# 126012 and up), 1745F, 1750, 1750V, (1830 1973-82), (1840 1970-82), (1840, 1840F SN# 126012 and up), 1845F, 1850, 1850F, 1850V, 1950, 1950F, (2040 1976-82 with 3-164 dsl), 2040, (2040F, 2040S SN# 126012 and up), (2140 1974-82), (2140 SN# 126012 and up), 2155, 2250, 2250F, 2345F, (2355 1987-92), (2440 1976-82 with 4-219 dsl), 2450, 2450F, (2510 1965-68 with 4-203 dsl), (2520 1967-73 with 4-219 dsl), (2555 1987-92 with 4-239 dsl), 2650, 2650F, (2750 1983-86 with 4-239 dsl), (2755 1987-92 with 4-239 dsl), (2840 1977-79 with 6-329 dsl), 2850, 2855N, (2940, 1980-84 with 6-359 dsl), (2950 1983-86 with 6-359), (2955 1987-92 with 6-359 dsl), (3030 1979-82), (3040 1980-84), 3050, (3055 1992 with 6-359 dsl), (3130 1979-82 6-359 dsl), (3140 1970-82 with 6-359 dsl), (3140 SN# 126012 and up). Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Item #: 156209, Ref: SND0044) $144.00

Starter - The length of this starter is 12.250 inches over all. Many of the models listed have a very tight space for the stater. This is a 12 volt, Delco style starter with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Item #: 113951, Ref: RE239087) $200.00

Starter Solenoid - Delco Starter Solenoid Assembly, flange mount, services starters 1107879 or 1107577 on 1010, 2010 gas~ 1107339 on 2510~ 1107350 or 1107578 on 3010, 3020, 4010, 4020 replaces Delco 1114356, 1114256, R11240. 12 volt {A} For 820, 1010, 2010, 2510, 3010, 3020, 4010, 4020 TP-AR68304 (Item #: 105675, Ref: 1047083M91) $17.50

Starter Switch, Used - For John Deere tractor models 2510, 3020 (s/n 68000-122999), 4020 (s/n 091000-200999), 5010 (s/n 008000-later), 5020 (s/n 024999-earlier), Compatible with John Deere Construction and industrial models 500 (s/n 068000-later), 600 (s/n 091000-later), Replaces John Deere OEM number AR39505, For a new version of this item use Item #: 121144, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421144) $8.01

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Item #: 121141, Ref: R7994) $12.00

Tune-up Kit - For John Deere tractor models 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030, Compatible with John Deere Combine (s) 55, 95, 105, 3300, Compatible with John Deere Baler (s) 323W, Replaces John Deere OEM number AT21719, Includes: Point Set and Condenser, (Item #: 165182) $9.00

Voltage Regulator, 12 Volt - Voltage Regulator, (12 Volt). For Motorola Alternator R3JD1B, AR40420. Fits JD24, JD310, JD500, JD600, JD760A, 2250, 2270, 2280, 2320, 2420, 2510, 2520, 3020, 310A, 310B, 3430, 3830, 4000, 4020, 410, 410B, 4320, 4520, 4620, 500C, 5010, 5020, 510, 510B, 5200, 5400, 5400, 6030, 610B, 710B, 710C, 7520, 830. (410C, 510C, 610 All <-736175, JD550A, SN<-123113, (210C, 315C, 482C All SN# <-736175) RED - ISO DIODE (+); BLACK - GROUND; GREEN - FIELD. Regulator for diesel and gas applications. Replaces AR38459, AR78298 (Item #: 105708, Ref: AR78298) $35.00

Engine Bearings

Bearing - For John Deere tractor models 2510, 2630, 2640, Compatible with John Deere Combine (s) 6602 (Hillside), Compatible with John Deere Header (s) 78, 88, 120, 183, 200, 213, 215, 216, 218, 220, 222, 224, 230, 278, 288, 483, Compatible with John Deere Hay Cutting (s) 1207, 1209, 1214, Replaces John Deere OEM number JD8275, (Item #: 116999) $15.00

Bearing Cone - For John Deere tractor models 2510, 2520, 3010, 3020 (s/n 122999-earlier), 3020 (s/n 123000-later), 4010, 4030, Compatible with John Deere Combine (s) 55, 95, 105, Compatible with John Deere Harvester (s) 99, Replaces John Deere OEM number JD8190, Bore: 1.000", Radius: .03", Width: .812", (Item #: 125316) $13.60

No
Picture
Bearing Cup - BEARING CUP For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430, 5010 (Item #: 121349, Ref: 25521) $7.50

No
Picture
Main Bearing Kits - For 2510 Gas with block numbers T23405, T24960, T26932, T32349 Only. 4 Cylinder, 180 CID. One kit per engine. Specify: Standard size, .010 Undersize, .020 Undersize or .030 Undersize. (Item #: MBK1442) $106.75

Main Bearings - .010 Oversize - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This .010 over set of bearings replaces John Deere part numbers AT21132, AT21110 (Item #: 106796) $73.00

Main Bearings - .010 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .010 oversize bearing set replaces John Deere part numbers AT21110, AT21132 (Item #: 106804) $73.00

Main Bearings - .020 Oversize - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This .020 over set of bearings replaces John Deere part numbers AT21112, AT21134, RE527235 (Item #: 106797) $30.10

Main Bearings - .020 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this .020 oversize bearing set replaces John Deere part numbers AT21112, AT21134, RE527235 (Item #: 106805) $44.20

Main Bearings - .030 Oversize - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This .030 over set of bearings replaces John Deere part numbers AT21136, AT21114 (Item #: 106798) $29.80

Main Bearings - .030 Oversize - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this ia .030 oversize bearing set replaces John Deere part numbers AT21136, RE27368 (Item #: 106806) $52.00

Main Bearings - Standard - Used on John Deere 135, 180, 202 and 219 cubic inch, Gas Engines. This Standard set of bearings replaces John Deere part numbers AT21139, AT21140 (Item #: 106795) $66.00

Main Bearings - Standard - Used on John Deere Diesel Engines: 202, 4039T, and 4045T, this bearing set replaces John Deere part numbers AT21139, AT21140 (Item #: 106803) $78.00

PTO Bearing Housing Cover Gasket - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, Compatible with John Deere Construction and industrial models 500, 500A, 500B, 500C, 510, 570, 570A, 600, 670, 670A, 672A, Replaces John Deere OEM number R33337, (Item #: 161849) $6.10

PTO Seal - For John Deere tractor models 830 (3 Cyl), 930, 1020, 1120, 1130, 1830, 2010, 2020, 2030, 2120, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3020 (s/n 123000-later), 3030, 3120, 3130, 4000, 4020 (s/n 201000-later), 4030, 4040, 4230, 4240, 4320, 4430, 4440, Compatible with John Deere Construction and industrial models 500, Replaces John Deere OEM number RE13181, AT16431, AT167936, CR28669, (Item #: 121741) $11.40

Rod Bearing 010 - Connecting rod bearing, .010 undersize, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 and up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020, 2020, 2510, 2520 (Item #: 106752, Ref: TP-AT21117) $18.50

Rod Bearing, .010, Diesel - (JD) Rod Bearing 010 (Single Pair) - For tractor models 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. Single rod bearing .010 . For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106756, Ref: AT21124) $7.20

No
Picture
Rod Bearing, .010, Gas - SINGLE rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 2520 SN# 157354>, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODEL, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G (Item #: 106752, Ref: AT21117) $18.50

Rod Bearing, .020, Diesel - For tractor models 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. Single rod bearing .020". For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106757, Ref: AT21126) $8.40

Rod Bearing, .020, Gas - Single rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T2693, 2510 with BLOCK # T3234, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730. (Item #: 106753, Ref: AT21119) $18.30

Rod Bearing, .030, Diesel - Single rod bearing .030". Fits 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106758, Ref: AT21128) $9.10

Rod Bearing, .030, Gas - Single rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# <159926, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 with BLOCK # T23405, T24960, T2693, 2510 with BLOCK # T3234, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730. (Item #: 106754, Ref: AT10519) $23.30

Rod Bearing, STD, Diesel - Single rod bearing. Fits 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106755, Ref: AT21138) $8.80

Rod Bearing, STD, Gas - SINGLE (STD size) rod bearing for gas engine on: 1010, 1020 with SN# <162078, 1020 with SN# 162079>, 145G SN# 30001>, 145G SN# 31000>, 2010, 2020 SN# 159927>, 202G, 217G SN# 40001>, 2510 GAS with BLOCK # T23405, T24960, T26932, 2510 with BLOCK # T32349, 2520 SN# <157354, 300 EARLY MODELS, 300 LATE MODELS, 3300 SN# <218730, 350 EARLY MODELS, 350 LATE MODELS, 400 EARLY MODELS, 400 LATE MODELS, 4030, 410 SN# <192001, 450 EARLY MODELS, 450 LATE MODELS, 480 EARLY MODELS, 480 LATE MODELS, 55 SN# 59282>, 6600 SN# <218730, 95 SN# 51615>, JD303G, JD544 EARLY, JD544 LATE (Item #: 106751, Ref: AT10123) $18.42

Thrust Washer - For John Deere tractor models 1640 (s/n 430000-later), 1830, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2155, 2350, 2355, 2355N, 2440 (s/n 30999-earlier), 2440 (s/n 341000-later), 2510, 2520, 2550, 2555, 2630, 2640 (s/n 341000-later), 2640 (s/n 340999-earlier), 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3010, 3020 (s/n 122999-earlier), 3020 (s/n 123000-later), 3030, 3040 (s/n 430000-later), 3055, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 4000 (s/n 201000-later), 4010, 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020 (s/n 024999-earlier), 5020 (s/n 025000-later), 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester (s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 300B, 415B, 515B, Replaces John Deere OEM number R72507, (Item #: 113870) $48.80

No
Picture
Transmission Clutch Oil Pump Gasket - For John Deere tractor models 2510, 3020, 4000, 4020, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 540, 540A, 540B, 540D, 548D, 570, 570A, 610B, 640, 640 (s/n 314954 - later), 648D, 710B, Replaces John Deere OEM number R100234, R70251, R33166, R49295, R57915, R69587, (Item #: 115233) $10.10

No
Picture
Transmission Clutch Oil Pump Gasket - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 540, 540A, 540B, 570, 570A, 640, Replaces John Deere OEM number R100232, (Item #: 176674) $9.50

Engine Gaskets

No
Picture
Complete Gasket Overhaul Kit - For model 2510 Gas with block numbers T23405, T24960, T26932 or T32349 Only. 4 Cylinder, 180 CID. One set used per engine. Kit includes Complete Gasket set with crankshaft seals and sleeves (where required). (Item #: FS3800G) $261.54

No
Picture
Complete Gasket Overhaul Kit - For model 2510 Gas with block numbers T23406, T24961, T26933 or Diesel T32342, R53250, R55034 Only. 4 Cylinder, 202 CID, 3.86â Std bore. One set used per engine. Kit includes Complete Gasket set with crankshaft seals and sleeves (where required). (Item #: FS3800W) $158.33

Conversion Gasket Set - For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520, Replaces John Deere OEM number AR70998, Engine: 135, 164, 180, 202, 219 Gas, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 106957) $126.00

Drain Plug Gasket - For John Deere tractor models 1020, 1520, 2010, 2020, 2030, 2040, 2140, 2240, 2350, 2440, 2510, 2520, 2550, 2640, 2750, 2755, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 5200, 5210, 5300, 5310, 5310N, 5400, 5410, 5500, 5510, 5510N, 6030, 6100, 6120L, 6200, 6220L, 6300, 6320, 6320L, 6400, 6420, 6420L, 6520L, 7020, 7200, 7210, 7400, 7410, 7510, 7520, 7610, 7710, 7720, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8440, 8450, 8520, 8520T, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T, Compatible with John Deere Construction and industrial models 500, 500C, 510, 540E, 540G, 548E, 548G, 600, 640E, 640G, 644, 644C, 644D, 644E, 644G, 646, 646C, 648E, 648G, 690B, 690C, 693B, 700A, 740, 740A, 740E, 740G, 743, 743A, 744E, 748E, 748G, 760, 760A, 762A, 762B, 770A, 770B, 772A, 772B, 790, 792, 844, 850, 855, 860B, 862, 890, 892ELC, Replaces John Deere OEM number A4827R, (Item #: 109412) $1.80

Flywheel Housing Gasket - For Models using 329 6 cylinder diesel engines. Replaces T23596, R49516 (Item #: 176661, Ref: R97351) $8.10

Front Crank Seal, Diesel - Front seal. Fits 135, 152, 164, 202, 219, 179, 239, 329 and 359 CID diesel engines. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106849, Ref: AR67942) $7.10

Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 2150, 2155, 2240, 2250, 2250F, 2255, 2345F, 2350, 2355, 2355N, 2440, 2450, 2450F, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650F, 2650N, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3155, 3200, 3200X, 3210, 3210X, 3255, 3300X. Replaces AR67942, AT21608 (Item #: 106849, Ref: AT21608) $7.10

Full Gasket Set - For John Deere tractor models 2020, 2510, Replaces John Deere OEM number RE501570, Engines: 202 Diesel, Contains all gaskets necessary for a complete engine overhaul (crankshaft seals not included), (Item #: 106932) $105.00

Full Gasket Set - With Rear Main Seal and Timing Cover Seal For 2020, 2510 with 202 Diesel Engine (Item #: 131615, Ref: R-RE38558) $167.00

No
Picture
Head Gasket Set - For 2020, 2510 with 180 Gas Engine (Item #: 106881, Ref: HS3800) $90.00

No
Picture
Head Gasket Set - For 2020, 2510 with 202 Diesel Engine (Item #: 106882, Ref: R-RE38847) $48.80

No
Picture
Liner Sealing Ring Kit - For John Deere tractor models 820, 830, 1020, 2020, 2510, 2520, 4030, 8630, 8640, 8650, Compatible with John Deere Construction and industrial models 300, 301, 350, 380, 400, 401, 440, 450, 480, 540, 544, 570, Compatible with John Deere Engine (s) 135 (s/n 162079-later), 152 (s/n 154766-later), 202 (s/n 157353-later), Replaces John Deere OEM number AR71617, No o-ring grooves on sleeve, 3 o-rings, (Item #: 128692) $5.90

Liner Sealing Ring Kit - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2440, 2510, 2520, 2840, 3030, 3130, 3135, 4030, Compatible with John Deere Combine (s) 925, 935, 945, 955, 3300, 4400, 4420, 6600, Compatible with John Deere Harvester (s) 484, Compatible with John Deere Construction and industrial models 300B, 301A, 302, 302A, 310, 310A, 310B, 350B, 350C, 400, 401B, 401C, 401D, 410, 410B, 440, 440A, 440B, 444, 444C, 444CH, 444D, 450, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 540, 540A, 544, 544A, 570, 570A, 710B, 710C, Compatible with John Deere Engine (s) 164, 219, 329, Compatible with John Deere Hay Cutting (s) 2250, 2270, 2280, 2320, 2420, Replaces John Deere OEM number AR71618, (Item #: 166432) $6.30

Main Crankshaft Seal Front - For tractor models 1010, 1010 GAS, 145G SN# 30001>, 2010, 2010 GAS, 217G SN# 40001>, 2510, 2520, 3020, 340D, 4000, 4010, 4020, 4230, 4320, 440C, 440D, 448D, 4430, 4520, 4620, 500C, 5010, 5020, 510, 55 SN# 59282>, 7020, 95 SN# 51615>, 440, 440A, 440B, 500, 500 SN# <123113, 500A, 500B, 600, 700A, 760, 760A. Replaces (R35798) USED WITH 1000 RPM PTO. (Item #: 121742, Ref: AT344T) $12.00

No
Picture
Oil Pan Gasket - For tractor models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755. (Item #: 106909, Ref: R97342) $12.00

Rear Crank Seal - For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Item #: 106854, Ref: AR92893) $26.70

No
Picture
Rear Main Seal - For 2020, 2510 with 202 Diesel Engine (Item #: 106854, Ref: R-RE24959) $26.70

No
Picture
Seal - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. Price shown is for each, sold only in multiples of 2 items. (Item #: 110545, Ref: TP-AR26480) $9.70

No
Picture
Sealing Ring Liner Kit - For John Deere tractor models 1020 (135 CID Gas Engine (Early Models), s/n 162078-earlier), 2020 (180 CID Gas Engine, s/n 159926-earlier), 2510 (180 CID Gas Engine with Block T23405, T24960, T26932), 2520 (202 CID Gas Engine, s/n 157354-earlier), Compatible with John Deere Construction and industrial models 300 (135 CID Gas Engine (Early Models), 350 (135 CID Gas Engine (Early Models), 400 (180 CId Gas Engine, (Early Models), 450 (180 CId Gas Engine, (Early Models), 480 (180 CId Gas Engine, (Early Models), 544 (303G CID Gas Engine, (Early), Replaces John Deere OEM number R48637, R48638, 3 Sealing Rings, (Item #: 176707) $3.40

No
Picture
Timing Cover Gasket - For John Deere tractor models 820, 830, 920, 930, 1030, 1130, 1520, 1630, 1830, 2030, 2040, 2130, 2150, 2155, 2255, 2350, 2355, 2355N, 2510, 2550, 2555, 2750, 2755, 2855N, 2950, 2955, 3030, 3055, 3130, 3150, 3155, 3255, 4050, 6200, 6300, 6400, 6500, 6506, 6600, 6800, 6900, Replaces John Deere OEM number R97454, T20155, (Item #: 176642) $5.90

No
Picture
Upper Gasket - Valve grind set. For 2510 diesel, 4 cylinder 202 CID. Use with block numbers: T23406, T24961, T26933 only. TISCO supplies 3.86 standard bore 3 ring piston. For 2020, 2510 (Item #: 106882, Ref: HS3800W) $48.80

Water Pump Gasket - For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520, Compatible with John Deere Combine (s) 3300, Replaces John Deere OEM number T20239, (Item #: 154898) $7.10

Engine Rebuild Kits

No
Picture
Basic Engine Kit - For 2510 Gas with block numbers T23405, T24960, T26932 Only. 4 Cylinder, 180 CID. Engine Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set and crankshaft seals. Engine bearings must be ordered separately. (Item #: 130670, Ref: BEKD4444-LCB) $928.00

No
Picture
Basic Engine Kit - For 2510 Diesel with block numbers T23406, T24961 and T26933 Only. 4 Cylinder, 202 CID. Basic Engine Kit includes: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be ordered separately. (Item #: 130672, Ref: BEKD4451-LCB) $654.00

No
Picture
Basic Engine Kit - For 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4 Cylinder, 202 CID, 3.86 inch Std bore. Basic Engine Kit includes: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be ordered separately. (Item #: 130673, Ref: BEKD4452-LCB) $615.00

No
Picture
Basic In-Frame Engine Kit - For 2510 Gas with block numbers T23405, T24960, T26932 Only. 4-Cylinder Gas, 180 CID. 3.86" Standard Bore, 3-Ring Piston, 2 Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Item #: 189536, Ref: BIFD4444) $821.00

No
Picture
Basic In-Frame Engine Kit - For 2510 Gas with block # T32349 Only. 4-Cylinder Gas, 180 CID. 3.86" Standard Bore, 3-Ring Piston, No Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Item #: 189626, Ref: BIFD4445) $894.00

Basic In-Frame Engine Kit - For 2020 and 2510 Diesel with block numbers T23406, T24961 and T26933 only. 4-Cylinder Diesel, 202 CID. 3.86" Standard Bore, 3-Ring Piston, 2 Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Item #: 189543, Ref: BIFD4451) $526.00

No
Picture
Basic In-Frame Engine Kit - For 2020 and 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4-Cylinder Diesel, 202 CID. 3.86" Standard Bore, 3-Ring Piston, No Grooves on Sleeve. Basic In-Frame Kit. Contains sleeves and sleeve seals, pistons and rings, pins and retainers, valve-grind gasket set, oil pan gasket. For 2510 Series, 2020 Series. (Item #: 189544, Ref: BIFD4452) $511.00

Basic Overhaul Kit - Basic engine kit, less bearings. For 2510 gas, 4 cylinder 180 CID. Use with block number T32349 only. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals. Engine bearings must be orde For 2020, 2510 (Item #: 130671, Ref: BEKD4445-LCB) $1089.01

No
Picture
Cylinder Liner - For John Deere tractor models 820 (3.152D engine s/n 154766-later), 830 (3.152D engine s/n 154766-later), 1020 (3.152D engine s/n 154766-later), 1030 (3.152D engine s/n 154766-later), 2020 (4.202 engine s/n 158257-later), 2510 (4.202 engine s/n 158257-later), Compatible with John Deere Construction and industrial models 300 (3.152 engine s/n 154766-later), 300A (3.152 engine s/n 154766-later), 300B (3.152 engine s/n 154766-later), 301A (3.152 engine s/n 154766-later), 350A (3.152 engine s/n 154766-later), 350B (3.152 engine s/n 154766-later), 380 (3.152 engine s/n 154766-later), 400, 440, 480, 544 (6.303 engine s/n 158976-later), 3420 (6.303 engine s/n 158976-later), Replaces John Deere OEM number T32340, (Item #: 176706) $71.00

No
Picture
Engine Major Overhaul Kit - For 2020, 2510, 400, 440, 450, 480 all with SN<158257, 4.202 Diesel, 300 Series, O-Rings on liner, block # T23405 or T24961, 3.86" bore, 1.185" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set, Camshaft Conn Rod Bushing and Bolts, and Camshaft Bushing. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030, Camshaft Bushing out. Diameter .020 O/S or inner dia. .020 O/S. Rear Seal not used with flywheel housing marked T20300, T22991. (Item #: 130672, Ref: OK4481) $654.00

No
Picture
Engine Overhaul Kit with Crankshaft - Used on John Deere 4-202 Diesel Engine 2020 Up to engine serial number 156883, 2510 Up to engine serial number 158257, 2510 Blocks with block numbers T23406, T24961 and T26933. 'O' Ring grooves ON LINER. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The early production of this engine has grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Item #: EKMC58) $1359.30

Engine Overhaul Kit with Crankshaft - Used on John Deere 4-202 Diesel Engine serial number 156884 and up, with block numbers T32342, T53250 and T55034 Only. 4 Cylinder, 202 CID. Engine Overhaul Kit includes sleeves and sleeve seals, pistons and rings, pins (1 3/16 inch O.D. pins) and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, main bearings and connecting rod bearings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 (Item #: 183995, Ref: EKMC59) $1719.01

No
Picture
Overhaul Kit - Engine overhaul kit, less bearings. For 2020, 2510 gas, 4 cylinder 180 CID. Use with block numbers: T23405, T24960, T26932 only. Kit contains sleeves and sleeve seals (block uses 3 sealing rings-2 grooves on sleeves), pistons and rings, pins and retainers, pin bushings For 2020, 2510 (Item #: EOK4444-LCB) $1003.45

No
Picture
Overhaul Kit - Engine overhaul kit, less bearings. For 2510 gas, 4 cylinder 180 CID. Use with block number T32349 only. Kit contains sleeves and sleeve seals (block uses 3 sealing rings-0 grooves on sleeves), pistons and rings, pins and retainers, pin bushings complete gasket For 2020, 2510 (Item #: EOK4445-LCB) $1130.65

No
Picture
Overhaul Kit - Engine overhaul kit, less brgs. For 2510 diesel, 4 cyl. 202 CID. Use with block numbers: T23406, T24961, T26933 only. Kit contains sleeves and sleeve seals (block uses 3 sealing rings-2 grooves on sleeves), pistons and rings, pins and retainers (1-3/ 16 O.D. pins) For 2020, 2510 (Item #: EOK4451-LCB) $907.92

No
Picture
Overhaul Kit - Engine overhaul kit, less brgs. For 2510 diesel, 4 cyl. 202 CID. Use with block numbers: T32342, R53250, R55034 only. Kit contains sleeves and sleeve seals (block uses 3 sealing rings- no grooves on sleeves), pistons and rings, pins and retainers (1 -3/16 O.D. pi For 2020, 2510 (Item #: EOK4452-LCB) $967.71

Engine Parts

No
Picture
Balancer Shaft - Left - For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Left Hand. (Item #: 114550, Ref: AR61352) $115.00

Balancer Shaft, LH - Balancer Shaft, LH This shaft is not the style that has the weight bolted on. MARKED AS R54054 . For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Item #: 114550, Ref: RE26283) $115.00

Balancer Shaft, RH - Balancer Shaft, RH This shaft is not the style that has the weight bolted on. MARKED AS R54054. For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Item #: 114551, Ref: RE26282) $109.00

Balancer Shaft - Right - For tractor models JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Right Hand. (Item #: 114551, Ref: AR61351) $109.00

No
Picture
Bare Block, Remanufactured, T26933, T24961, T23406 - For John Deere tractor models 2020, 2510, Replaces John Deere Casting number T26933, T24961, T23406, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 203892) $1650.01

No
Picture
Bushing - For John Deere tractor models 2510, 2520, 3020 (s/n 123000-later), 3020 (s/n 122999-earlier), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4650, 4755, 4850, 4955, 4960, Replaces John Deere OEM number R49372, (Item #: 167307) $29.80

Camshaft - This Camshaft replaces those marked T20013 or T20014. It has multiple John Deere agriculture and industrial applications. Used so some of the following diesel and turbo diesel engines: 4.202, 4.218, 4.239, 4.267, 4039D, 4039T, 4045D. Verify casting numbers before ordering. Does not include tach drive. Replaces R82820, T20013 or T20014. Uses R81513 Screw In Tach Drive, not included, not available through YT. (Item #: 152042, Ref: R82820) $190.00

Camshaft - No Drive Gear In 3rd Cylinder, Used - For John Deere tractor models 1640, 1830, 1840, 2020 (engine s/n 74999-earlier), 2030, 2040, 2040S, 2120 (engine s/n 74999-earlier), 2130, 2140, 2350, 2355, 2440, 2510 (engine s/n 157575-earlier), 2520 (engine s/n 157575-earlier), 2550, 2555 (TSS Transmission), 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 5500, 5500N, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, Compatible with John Deere Combine(s) 3300 (s/n 3000-earlier), 4400 (engine s/n 277615-earlier), Compatible with John Deere Harvester(s) 482, 499 (s/n 1200-earlier), Compatible with John Deere Construction and industrial models 70, 70D (engine s/n 299999-earlier), 190E, 210C (engine s/n 300000-later), 290D (engine s/n 300000-later), 300D, 310A, 310B, 310C (engine s/n 299999-earlier), 310D, 315C (engine s/n 299999-earlier), 315D, 340D, 344E (engine s/n 300000-later), 344G, 400 (s/n 104241-earlier), 400G (engine s/n 299999-earlier), 401, 401B, 401C, 401D, 410 (s/n 192000-later), 410B, 410C (engine s/n 299999-earlier), 410D, 415B, 440 (s/n 49999-earlier), 440A (s/n 20000-21152), 440B (s/n 181034-earlier), 440C, 440D (early), 444E (engine s/n 299999-earlier), 444G, 448D, 450 (s/n 102766-earlier), 450B (s/n 187208-earlier), 450C, 450D, 450E, 450G (engine s/n 300000-742459), 455D, 455E, 455G (engine s/n 300000-742459), 480 (s/n 104241-earlier), 480A (s/n 193099-earlier), 480B, 480C, 482C (engine s/n 300000-later), 490, 490E, 510B, 510C (engine s/n 299999-earlier), 510D, 515B, 540B, 540D (engine s/n 299999-earlier), 540E (engine s/n 383839-earlier), 548D, 548E (engine s/n 383839-earlier), 550, 550A (engine s/n 299999-earlier), 550B (engine s/n 299999-earlier), 550G (engine s/n 299999-earlier), 555, 555A (engine s/n 299999-earlier), 555B (engine s/n 299999-earlier), 555G (engine s/n 299999-earlier), 590D (engine s/n 299999-earlier), 595, 595D (engine s/n 299999-earlier), 610B, 610C, 650G (engine s/n 299999-earlier), Compatible with John Deere Engine(s) 180, 202, 219, 4039, 4039T, 4045, 4045T, 4219, 4219T, 4239, 4239A, 4239D, 4239T, 4276, Compatible with John Deere Hay Cutting(s) 880 (engine s/n 158257-earlier), 2270 (engine s/n 277615-earlier), 2280, 2360, 2420, 3430 (engine s/n 300000-later), 3830 (engine s/n 299999-earlier), Compatible with John Deere Sprayer(s) 6000 (engine s/n 302609-later), 6100, 6500, 6600, Replaces John Deere OEM number AT18049, R82820, AT20830, Replaces Casting nos R81518, T20013, T20014, Replaces OEM nos R79344, RE52974, RE14972, RE55901, For Diesel Engines Only, No Distributer Drive Gear, For a new version of this item use Item #: 152042, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442943) $82.01

Connecting Rod Bolt - Used on Connecting Rods marked T20007, R51727, or R58979, this bolt is 2.125 inches long. (Item #: 109500, Ref: R74194) $2.60

Connecting Rod, Used - For John Deere tractor models 820, 830 (154766-later), 1020, 1030, 1420 (s/n 179601-earlier), 1520 (s/n 179601-earlier), 1530 (s/n 179601-earlier), 2020, 2030 (s/n 275483-later), 2320 (s/n 275483-later), 2510, 2520 (Diesel), Compatible with John Deere Harvester(s) 499 (s/n 275483-later), Compatible with John Deere Construction and industrial models 300, 300A, 300B, 301A, 302 (s/n 179601-earlier), 302A, 310 (s/n 189323-earleir), 350A, 350B, 350C, 380, 400, 401 (s/n 275483-later), 410 (s/n 189345-earlier), 410B, 440, 440A (s/n 181034-earlier), 440C, 450 (s/n 158257-earlier), 450A, 450B, 480, 480A, 540A, 544, 570, 570A, 3420, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2420, Replaces John Deere OEM number AT18005, MAT18005, RE19733, Replaces John Deere Casting nos T20007, R81410, For a new version of this item use Item #: 121167, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421167) $44.01

Connecting Rod, Used - For John Deere tractor models 1010, 1020, 2010, 2020, 2510, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos T20327, AT18147, T454T, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498840) $35.01

Crankshaft - This is a short snout, 1.42 inches. For 2510, 2020, 2030, 2520, 2440, 2250, 2510, 210C Backhoe, 6000 Hi Cycle, 219, 4239 Power Units. Crankshaft -FOR 4 CYLINDER Diesel engines, Less Bearings. Replaces AT18030, AT72949, RE33197, RE48748, RE57664. Casting numbers T23480, T23517, T28743, R81959, R94644. (Item #: 102103, Ref: S-AT18030) $595.00

No
Picture
Crankshaft, Remanufactured, T23483T - For John Deere tractor models 2020, 2510 (Gas), Replaces Casting number T23483T, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200372) $487.01

Crankshaft, Remanufactured, T23517 - For John Deere tractor models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2750, 2755, 2855 (all diesel), Replaces Casting number T23517, T23480, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., For a New version of this sku use Item #: 102103, (Item #: 200373) $465.01

No
Picture
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 2020, 2510, 2520. (Item #: VOKD180) $155.33

No
Picture
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640. (Item #: 131577, Ref: VOKD202) $246.00

Cylinder Head, Used - For John Deere tractor models 210, 2020, 2030, 2140, 2350, 2355, 2440, 2450, 2510, 2520, 2530, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2850, 2855 (Diesel), Compatible with John Deere Construction and industrial models 210, 415, 515, Compatible with John Deere Hay Cutting(s) 2250, 2270, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM number AR62452, Replaces John Deere Casting nos CD16202, R54052, R54560, R55003, R56790, R57078, T23486, T24756, Engine(s): 219, 202, 239, 276, 4219, 4239, 4276, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200317, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400317) $291.01

Cylinder Head with Valves, Remanufactured, RE35279 - For John Deere tractor models 2020, 2030, 2350, 2355, 2440, 2450, 2510, 2520, 2530, 2550, 2555, 2630, 2640 (Diesel), Replaces John Deere OEM number RE35279, Replaces John Deere Casting number CD16202, R54052, R54560, R57078, T23486, T24756, R56790, Engine 202, 219, 239, 276, 4219, 4239, 4276, Cylinders: 4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 203813) $1700.01

No
Picture
Cylinder Head with Valves, Used - For John Deere tractor models 2020, 2030, 2350, 2355, 2440, 2450, 2510, 2520, 2530, 2550, 2555, 2630, 2640 (Diesel), Replaces John Deere OEM number RE35279, Replaces John Deere Casting nos CD16202, R54052, R54560, R56790, R57078, T23486, T24756, Engine(s): 202, 219, 239, 276, 4219, 4239, 4276, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 203813, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403813) $670.01

No
Picture
Drum, High Range - For John Deere tractor models 2510, 2520, 3020 (U, s/n 122999-earlier), 3020 (s/n 123000-later), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4455 (Mexico), Replaces John Deere OEM number R63072, (Item #: 165807) $199.00

Flywheel Housing, Used - For John Deere tractor models 2510, 2520, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, Compatible with John Deere Skid Steer Loader(s) 24, Compatible with John Deere Harvester(s) 7445, 9920, 9930, Compatible with John Deere Engine(s) 135, 152, 180, 202, 219, 303, 4039, 4039T, 4045 (s/n 100000-499999), 4045T (s/n 100000-499999), 4239D, 4239T, 6059DF092 (s/n 100000-499999), 6059T (s/n 100000-499999), 6068 (s/n 100000-499999), 6068T (s/n 100000-499999), 6359A, 6359D, 6359T, Compatible with John Deere Hay Cutting(s) 2270, 2280, 2320, 2420, 3430, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM nos T25115, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498600) $321.01

Front Engine Plate, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2040 (s/n 465252-earlier), 2240 (s/n 465252-earlier), 2440, 2510, 2630, 2640, 2840 (ESN ending with T), 4030, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, Compatible with John Deere Harvester(s) 484, 7440 (s/n 599234-earlier), 9900, 9910, 9920, 9920 (s/n 599234-earlier), Compatible with John Deere Construction and industrial models 300B (s/n 127775-earlier), 301A (s/n 127775-earlier), 350C (s/n 127775-earlier), 510B (s/n 129443-earlier), Compatible with John Deere Engine(s) 4276 (s/n 129222-earlier), Compatible with John Deere Hay Cutting(s) 2280, 2320, 2420, Replaces John Deere OEM nos R56736, Diesel Engines, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434397) $100.01

No
Picture
Front Plate, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2640 (s/n 341000-later), 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3055, 3150, 3155, 3255, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 7200, 7400, 7600, 7700, 7800, Compatible with John Deere Combine(s) 3300, 4425, 4435, 9400, Compatible with John Deere Skid Steer Loader(s) 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 210C, 300B, 300D, 310D, 315D, Compatible with John Deere Engine(s) 4039, 4045, 4239D, 4239T, 4276, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2360, 3430, 3830, Compatible with John Deere Sprayer(s) 6100, 6500, 6600, Replaces John Deere OEM nos RE16149, R79863, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442437) $210.01

Gear Shift Quardrant Shaft, Used - For John Deere tractor models 2510 (Syncro-Range), 3010 (s/n 049999-earlier), 3020 (s/n 122999-earlier Syncro-Ranbge), 4010, 4020 (s/n 200999-earlier Syncro-Range), 5010, 5020 (s/n 030149-earlier), Compatible with John Deere Construction and industrial models 440 (Dubuque s/n 49999-earlier; Welland s/n 19999-earlier Syncro-Range), 440A (Dubuque s/n 49999-earlier; Welland s/n 19999-earlier Syncro-Range), 440B (Dubuque s/n 49999-earlier; Welland s/n 19999-earlier Syncro-Range), 500, 500A (s/n 123113-earlier), 600 (s/n 200999-earlier), 700A, Replaces John Deere OEM number R26178, For a new version of this item use Item #: 170004, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440981) $15.76

No
Picture
Gear - Transmission Clutch Oil Pump - For John Deere tractor models 2510, 2520, 3020 (s/n 122999), 4000 (s/n 201000-later), 4020 (s/n 201000-later), 4020 (s/n 200999-earlier), 4040, 4230, 4240, 4440, Compatible with John Deere Construction and industrial models 500C, 510, 540B, Replaces John Deere OEM number R48176, (Item #: 125908) $437.00

Helical Camshaft Gear, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1040, 1120, 1140, 1350, 1420, 1520, 1530, 1630, 1640 (s/n 430000-later), 1750, 1850, 2020, 2030, 2040, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240, 2250, 2255, 2320, 2350, 2355, 2355N, 2440, 2450, 2510, 2520, 2530, 2535, 2550, 2555, 2630, 2640, 2650, 2730, 2735, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3040 (s/n 430000-later), 3050, 3055, 3100, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 3330, 3350, 3530, 3540, 4020, 4030, 4050, 4530, 5105, 5200, 5205, 5210, 5220, 5300, 5310N, 5400, 5400N, 5500, 5700, 6200, 6200L, 6210, 6300, 6300L, 6310, 6400, 6400L, 6410, 6500, 6500L, 6510, 7200, 7210, 7400, 7410, 7600, Compatible with John Deere Combine(s) 3300, 4400, 4420, 4425, 6600, 6602, 9400, Compatible with John Deere Skid Steer Loader(s) 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 499, 699, 7440, 7445, 7450, 7455, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 70D, 210C, 244E, 290D, 300A, 300B, 300D, 301A, 302A, 310C, 310D, 315C, 315D, 340D, 344E, 350A, 350B, 350C, 350D, 355D, 380, 400, 401, 401A, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 440A, 440B, 440C, 444D, 448D, 450, 450A, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 490, 510B, 515B, 540B, 540D, 544, 544B, 544E, 544G, 548D, 555A, 555B, 555G, 570, 570A, 570B, 590D, 595D, 610B, 610C, 640D, 648D, 650G, 670, 670A, 672A, 710B, 710C, 3420, Compatible with John Deere Engine(s) 135, 152, 180, 202, 219, 3029, 4039, 4045, 4239D, 4239T, 6059T, 6068D, 6068T, 6329D, 6359D, 6359T, 6414D, 6414T, Compatible with John Deere Hay Cutting(s) 2270, 2280, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number T20070, Teeth: 48, For a new version of this item use Item #: 121425, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421425) $25.01

Injection Pump Drive Gear, Used - For John Deere tractor models 820, 920, 1020, 1520, 1530, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 7600, Compatible with John Deere Combine(s) 3300, 4420, 6600, 9400, Compatible with John Deere Skid Steer Loader(s) 250, 260, 8875, Compatible with John Deere Harvester(s) 484, 7440, 7445, 7450, 9930, Compatible with John Deere Construction and industrial models 310G, 310J, 310SG, 310SJ, 315SG, 315SJ (s/n BE315SJ300869-later), 344G, 410D, 410G, 410J, 440D, 444E, 444G, 450G, 455G, 490E, 495D, 510C, 510D, 540D, 540E, 540G (s/n 701059-earlier), 544E (s/n 300000-later), 544G, 548D (s/n 299999-earlier), 548E, 548G (s/n 701059-earlier), 550G, 555G, 590D, 595D, 624E (s/n 300000-later), 624G, 640D, 640E, 640G, 643D, 648D, 648E, 648G, 650G, 653E (s/n 713455-earlier), 655B, 670B, 672B, 690D, 690DR, 690ELC (s/n 704568-earlier), 693D, 710G, 710J, 740E, 748E, 750B, 750C (s/n 715797-earlier), 755B, 790ELC, 4400 (s/n 276749-earlier), 4500 (s/n 276749-earlier), Compatible with John Deere Engine(s) 3029, 4039, 4045, 4045T, 6059 (s/n 699999-earlier), 6068, 6068D, 6068T, Compatible with John Deere Hay Cutting(s) 3830, Compatible with John Deere Sprayer(s) 6100, 6500, 6600, Replaces John Deere OEM nos R104907, R56056, R84663, R116339, T20165, Teeth: 48, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434339) $50.01

Input Shaft Synchronizer Drum, Used - For John Deere tractor models 2510, 2520, 3020, 4000 (s/n 201000-later), 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R63072, .71" Thick, For a new version of this item use Item #: 165807, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498439) $110.01

Remanufactured Bare Block John Deere T24960,T26932 - For John Deere tractor models 2020, 2510, Replaces John Deere Casting number T24960, T26932, T23405, R72981, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204936) $1150.01

Ring Gear - For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 5200, 5300, 5400, 5500, 6200, 6300, 6400, 6500. Starter Flywheel Ring Gear for DIESELS. (Item #: 103943, Ref: R114282) $34.20

Rocker Arm, Used - For John Deere tractor models 820, 940, 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 2020, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2250, 2320, 2350, 2355, 2440, 2450, 2510, 2520, 2530, 2535, 2550, 2555, 2730, 2735, 2940, 2950, 2955, 3040, 3050, 3055, 3120, 3140, 3150, 3155, 3255, 3300, 3330, 3540, 4050, 5103, 5105, 5203, 5205, 5210, 5220, 5303, 5310, 5320, 5400, 5403, 5410, 5500, 5510, 6200, 6300, 7200, 7500, 7600, 7700, 7800, Compatible with John Deere Combine(s) 3300, 4400, 4420, 4425, 6602, 9400, Compatible with John Deere Skid Steer Loader(s) 240, 250, 260, 8875, Compatible with John Deere Harvester(s) 499, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 70, 70D, 210C, 244E, 290D, 300, 300A, 300B, 300D, 301, 301A, 310A, 310B, 310C, 310D, 315D, 340D, 344E, 350, 350A, 350B, 350D, 355D, 380, 400, 401, 401A, 401B, 401C, 401D, 410, 410B, 440A, 440B, 440C, 440D, 444, 444D, 444E, 444G, 448D, 450, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 482C, 490, 510C, 510D, 515B, 540B, 540D, 548D, 550A, 550B, 555G, 570A, 590D, 595, 595D, 610B, 610C, 640D, 648E, 650G, 670A, 750B, 755, 755A, 755B, Compatible with John Deere Engine(s) 3029, 3179, 4039 (s/n 379968-earlier), 4039T (s/n 379968-earlier), 4045 (s/n 379968-earlier), 4045T (s/n 379968-earlier), 4219, 4239, 4239T, 4276, 6059 (s/n 379968-earlier), 6059T (s/n 379968-earlier), 6068 (s/n 379968-earlier), 6068T (s/n 379968-earlier), 6076H, 6076T, 6303, 6329D, 6359D, 6359T, 6414, 6414T, Compatible with John Deere Hay Cutting(s) 2270, 2280, 2320, 2360, 2420, 3430, 3830, Replaces John Deere OEM number AR103679, RE31973, For a new version of this item use Item #: 117539, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435717) $9.01

Shift Arm, Used - For John Deere tractor models 2510, 2520, 3010, 3020, Replaces John Deere OEM nos R26398, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498427) $60.01

Shift Arm, Used - For John Deere tractor models 2510, 2520, 3020, Replaces John Deere OEM nos R33772, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498425) $53.01

Shifter Cam, Used - For John Deere tractor models 2510, 2520, 3010, 3020, Replaces John Deere OEM nos R33443, Replaces Casting nos R27831, Syncro Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498423) $80.01

No
Picture
Synchronizer Brake Drum - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R63073, (Item #: 165724) $211.00

Tappet - For tractor models 2510, 5210, 5310, 5410, 5510, 820, 920, 1020, 1120, 1520, 2020, 2520, 3120, 5220, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 4030, 2040, 2140, 2240, 2440, 3040, 3140, 3050. (Item #: 123888, Ref: T20073) $9.50

Timing Gear Cover - For John Deere tractor models 830, 930, 1020, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3030, 3130, 4030, Compatible with John Deere Combine (s) 3300, Compatible with John Deere Harvester (s) 484, 5420, 5440, 7440, 9900, 9910, 9920, Compatible with John Deere Construction and industrial models 70, 210, 210C, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 315, 315C, 340, 340D, 350, 350B, 350C, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 440, 440A, 440B, 440C, 440D, 444, 444C, 444CH, 444D, 450, 450B, 450C, 450D, 455, 455D, 480, 480A, 480B, 480C, 482, 482C, 490, 510, 510B, 510C, 540, 540A, 540B, 540D, 544, 544A, 544B, 544D, 548, 548D, 550, 550A, 555, 555A, 555G, 570, 570A, 610, 610B, 610C, 640, 640D, 643, 648, 648D, 650, 650G, 655, 655B, 670, 670A, 670B, 672, 672B, 690, 690D, 690DR, 693, 693D, 710, 710B, 710C, 750, 750B, 755, 755A, 755B, Compatible with John Deere Hay Cutting (s) 2320, 2360, 2420, Replaces John Deere OEM number AT19509, AR58196, Oblong Inspection Hole Open, (Item #: 123600) $280.00

Timing Gear Cover, Used - For John Deere tractor models 830, 930, 1020, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3030, 3130, 4030, Compatible with John Deere Combine(s) 932, 942, 952, 955, 965, 975, 985, 3300, Compatible with John Deere Harvester(s) 484, 5420, 5440, 7440, 9900, 9910, 9920, Compatible with John Deere Construction and industrial models 70, 210, 210C, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 315, 315C, 340, 340D, 350, 350B, 350C, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 440, 440A, 440B, 440C, 440D, 444, 444C, 444CH, 444D, 450, 450B, 450C, 450D, 455, 455D, 480, 480A, 480B, 480C, 482, 482C, 490, 510, 510B, 510C, 540, 540A, 540B, 540D, 544, 544A, 544B, 544D, 548, 548D, 550, 550A, 555, 555A, 555G, 570, 570A, 610, 610B, 610C, 640, 640D, 643, 648, 648D, 650, 650G, 655, 655B, 670, 670A, 670B, 672, 672B, 690, 690D, 690DR, 693, 693D, 710, 710B, 710C, 750, 750B, 755, 755A, 755B, Compatible with John Deere Hay Cutting(s) 2320, 2360, 2420, Replaces John Deere OEM number AR58196, AR58195, Replaces Casting nos R52880, T20153, AT27105, Oblong Inspection Hole Casted Shut, For a new version of this item use Item #: 123600, (Item #: 423600) $66.01

Transmission Drive Shaft Blocker, Used - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces John Deere OEM nos R52498, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498828) $30.01

Transmission Drive Shaft Shift Collar, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, Replaces John Deere OEM number R33383, Inside Diameter: 1.62", Rear, Lo-High Range, Width: 1-1/4", For a new version of this item use Item #: 127291, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498556) $50.01

Transmission Input Shaft Blocker, Used - For John Deere tractor models 2010 (s/n 42001-later), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, Replaces John Deere OEM nos R31028, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498442) $50.01

Transmission Input Shaft Blocker, Used - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM nos AR77817, RE227962, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498443) $291.01

Transmission Input Shaft Syncronizer Drum, Used - For John Deere tractor models 2010 (s/n 42001-later), 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces John Deere OEM nos R31027, R52499, Reverse Range, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498441) $69.01

Valve Cover, Used - For John Deere tractor models 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855N, Compatible with John Deere Construction and industrial models 244H, 310A, 310B, 310E, 310G, 310SE, 310SG, 315SE, 315SG, 344G, 400, 401, 401B, 401C, 401D, 410, 440, 440A, 440B, 444G, 450, 450B, 450C, 480, 480A, 480B, 480C, Compatible with John Deere Engine(s) 180, 202, 219, 4039, 4039T, 4045, 4045T, 4219, 4239, 4239A, 4239D, 4239T, 4276, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM nos AT18015, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434460) $54.01

No
Picture
Valve, Exhaust - Valve, exhaust, standard. 6 used per engine. For 329 CID 6 cylinder, diesel engine serial number 277549 and up. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030 (Item #: 128630, Ref: TP-R79624) $9.50

No
Picture
Valve, Exhaust - Standard, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 and up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020, 2020, 2510, 2520 (Item #: 169306, Ref: TP-T25467) $40.40

Valve, Intake - Used on John Deere 152, 164, 179 - 3 cylinder, 202, 219, 239, 276 4 cylinder, and 329. 359 6 cylinder diesel engines. 1.772 inch Head O.D., 0.371 inch Shaft O.D., 5.168 inch Overall Length. Replaces John Deere R79623, R52251 (Item #: 128629, Ref: R79623) $7.70

No
Picture
Valve, Intake - For tractor models 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2840, 2940, 2950, 2955, 4030. (Item #: 128629, Ref: R79623) $7.70

No
Picture
Valve, Intake - Valve, intake, standard, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 and up. TISCO supplies 3.86 standard bore 3 ring piston. For 1020, 2020, 2510, 2520 (Item #: 169003, Ref: TP-T25466) $11.20

Valve Lifter, Used - For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 301, 820, 830, 840 (s/n 599999-earlier), 920, 930, 940, 1020, 1030, 1035 (s/n 50000-later), 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1635, 1640, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 2130, 2135 (s/n 50000-later), 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955 (s/n 767516-earlier), 3030, 3040, 3050, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3200, 3210, 3255, 3300, 3310, 3340, 3350, 3400, 3410, 3640, 3650, 4030, 4040, 4240, 5103, 5105, 5200, 5203, 5205, 5210, 5215F, 5215V, 5220, 5300, 5303, 5310, 5315, 5315V, 5320, 5400, 5403, 5410, 5415, 5500, 5510, 5515, 5515V, 5600, 5700, 6200, 6300, 6400, 6500, 6600, 6800, 6900, 7200, 7220, 7320, 7400, 7500, 7600, 7700, 7800, Compatible with John Deere Combine(s) 925, 945, 952, 975, 985, 1032, 1042, 1052, 1065 (s/n 41200-later), 1068, 1075, 1085, 1133, 1144, 1155, 1157, 1158, 1166, 1169, 1174, 1177, 2054 (European), 2056 (European), 2058 (European), 3300, 4400, 4420, 4435, Compatible with John Deere Skid Steer Loader(s) 24, 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 5440, 7440, 7445, 7450, 9900, 9910, 9920, Compatible with John Deere Construction and industrial models 301A, 344E, 344G, 401B, 444, 444C, 444D, 444E, 444G, 544, 544G, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number T20073, For a new version of this item use Item #: 123888, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442423) $4.51

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 2020, 2510, 2520. Contains: springs, guides, locks, (no valves). (Item #: VSKD180) $31.72

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 1530, 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 3020. Contains: springs, caps, locks, (no valves or guides). (Item #: VSKD202) $76.26

No
Picture
Valve Train Kit - For John Deere tractor models 480, 2030, 2510, 2520, Compatible with John Deere Combine (s) 45, 3300, Compatible with John Deere Harvester (s) 482, 499, Compatible with John Deere Construction and industrial models 400, 401, 401B, 401C, 410, 440, 450, 2020, Compatible with John Deere Engine (s) 180, 202, 219, Compatible with John Deere Hay Cutting (s) 880, (8) Valve Springs, (16) Valve Keepers, (4) Intake Valves, (4) Exhaust Valves, (Item #: 169631) $165.00

No
Picture
Valve Train Kit - For John Deere tractor models 2020 (s/n 158258-later), 2030 (4.219 engine s/n 275483-later), 2320 (4.219 engine s/n 275483-later), 2440 (4.219 engine s/n 275483-later), 2510 (s/n 158258-later), 2530 (4.219 engine s/n 275483-later), 2630, 2640, 3300 (4.219 engine s/n 275483-later), Compatible with John Deere Combine (s) 3300 (4.219 engine s/n 275484-later), Compatible with John Deere Harvester (s) 499 (4.219 engine s/n 275484-later), Compatible with John Deere Construction and industrial models 310B (4.219 engine s/n 275484-later), 340D, 344E, 400 (s/n 158258-later), 401 (s/n 275483-later), 401A (s/n 275483-later), 401B (4.219 engine s/n 275484-later), 401C (4.219 engine s/n 275484-later), 401D (4.219 engine s/n 275484-later), 410 (4.219 engine s/n 275484-later), 410B (4.219 engine s/n 275484-later), 410C, 410D, 440 (s/n 275483-later), 440B (4.219 engine s/n 275484-later), 440C, 450A (s/n 275483-later), 450B (s/n 275483-later), 450C (4.219 engine s/n 275484-later), 450D (4.219 engine s/n 275484-later), 450E, 450G, 455D (4.219 engine s/n 275484-later), 455E, 480 (s/n 158258-later), 480A (s/n 275483-later), 480B (4.219 engine s/n 275484-later), 480C (4.219 engine s/n 275484-later), 490D, 493D, 510B, 540B (4.219 engine s/n 275484-later), Compatible with John Deere Hay Cutting (s) 2270 (s/n 275483-later), 2270 (4.219 engine s/n 275484-later), 2280 (4.219 engine s/n 275484-later), 2420 (s/n 275483-later), Replaces John Deere OEM number R79623, R79624, R96456, R51734, T20129, 33K701, R26125, RE11410, R87627, Size: Standard, Kit includes: (4) intake valves, (4) exhaust valves, (4) intake valve inserts, (4) exhaust valve inserts, (8) valves stem caps, (16) valve keepers, (8) valve springs, (4) valve rotators, (4) valve stem o-rings, (Item #: 176570) $278.00

No
Picture
Valve Train Kit - For John Deere tractor models 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, Compatible with John Deere Combine (s) 3300, 4400, Compatible with John Deere Construction and industrial models 210C, 290D, 310A, 310B, 310C, 315C, 340D, 344E, 400, 400G, 401, 401B, 401C, 401D, 410, 410B, 410C, 415B, 440, 440A, 440B, 450, 450B, 450C, 450E, 450G, 455G, 480, 480A, 480B, 480C, 482C, 490D, 493D, 510B, (Item #: 186250) $137.00

Engine Pistons and Sleeves

No
Picture
Piston Pin Bushing - Bushing, for 1-3/16 outside diameter piston pin. 6 used per engine. For 329 CID 6 cylinder, diesel engine to serial number 277549. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1020, 1520, 1530, 2020, 2030, 2510, 2520, 4030 (Item #: 156030, Ref: T23471) $6.70

No
Picture
Piston Pin Bushing - Piston pin bushing, 4 used per engine. For 2520 gas, 4 cylinder 202 CID. To engine SN# 157354 and up. For 2010 with 145 CID Gas Engine 3.86 standard bore 3 ring piston. For 1020, 2010, 2020, 2510, 2520 (Item #: 108007, Ref: TP-T526T) $24.30

No
Picture
Piston Pin Bushing - For tractor models (1020, 1030, 300, 300A, 350A, 350B, 380, 820 with 3.152 eng.), (1420, 1520, 1530, 302, 302A, 350B SN# 179601 and below with 3.164D eng.), (2020, 2510, 400, 440, 480 with 4.202 eng.), (2030, 2270, 2320, 2420, 2520, 401, 401A, 440, 440A, 440B, 450A, 450B, 480A, 499 SN# 275483 and up with 4.219 eng.), (2355NCS, 2355NTSS with 3.179T eng.), (300B, 301A, 830 SN# 154766 and up with 3.152 eng.), (3120, 4020, 4030, 4420, 499, 540A, 544A, 570A, 699 SN# 277548 and below with 6.329 eng.), (3420, 544 SN# 158976 and up with 6.303 eng.), (450 SN# 158257 and below with 4.202 eng), 5400N, 5500. (Item #: 156030, Ref: T23471) $6.70

No
Picture
Sleeve and Piston Kit - For one hole. Fits Models: (1020 gas with SN# up to 162078), (2020 SN# up to 159926), (2510 gas with block # T23405, T24960, T26932), (300, 350, 400, 450, 480 early models). Reference SK404 (Item #: 189185, Ref: SK404) $217.00

No
Picture
Sleeve and Piston Kit - For 2510 Gas with block numbers T23405, T24960, T26932 Only. 4 Cylinder, 180 CID. One set used per engine. Kit includes: Sleeves - 2 grooves on sleeve, 3 ring pistons and rings, pins and retainers, for 3.86 bore. (Item #: PK444) $489.90

No
Picture
Sleeve and Piston Kit - For 2510 Gas with block # T32349 Only. 4 Cylinder, 180 CID. One set used per engine. Kit includes: Sleeves - 2 grooves on sleeve, 3 ring pistons and rings, pins and retainers, for 3.86â bore. (Item #: PK445) $705.18

No
Picture
Sleeve and Piston Kit - For 2510 Diesel with block numbers T23406, T24961 and T26933 Only. 4 Cylinder, 202 CID. One set used per engine. Kit includes: Sleeves - 2 grooves on sleeve, 3 ring pistons and rings, 1-3/16" O.D. pins and retainers, for 3.86â Std bore. (Item #: PK451) $583.53

No
Picture
Sleeve and Piston Kit - For 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4 Cylinder, 202 CID, 3.86â Std bore. One set used per engine. Kit includes: Sleeves - no grooves on sleeve, 3 ring pistons and rings, 1-3/16" O.D. pins and retainers, for 3.86â Std bore. (Item #: PK452) $559.13

No
Picture
Sleeve and Piston Kit - Complete kit for one cylinder. 3.86" bore, 1.185" pins. O-rings in block. (3) required For tractor models 1020, 1030, 300, 300A, 300B, 301A, 350A, 350B, 380, 820, 830 all SN# 154766 and up with 3.152D engine. (4) required For tractor models 2020, 2510, 400, 440, 480 all SN# 158257 and up with 4.202 engine. (6) required For tractor models 3420, 544 SN# 158976 and up with 6.303 engine. Kit comes with piston, pins, sleeve, rings. (Item #: 166127, Ref: AR71591) $131.00

No
Picture
Sleeve Assembly (4 Required) - 3.858 Bore with O-Rings on Sleeve For 1120, 2020, 2510 with 202 Diesel Engine (To S#158257) (Item #: R-CK3481) $119.56

No
Picture
Sleeve Assembly (4 Required) - 3.858 Bore with O-Rings in Block For 2020, 2510 with 202 Diesel Engine (From S#158258) (Item #: 166127, Ref: AR71591) $131.00

Engine Rings

No
Picture
Engine Rings - For 2510 Gas with block numbers T23405, T24960, T26932 Only. 4 Cylinder, 180 CID. One set used per engine. Set for 3 ring piston. (Item #: PRS444) $98.15

No
Picture
Engine Rings - For 2510 Gas with block # T32349 Only. 4 Cylinder, 180 CID. One set used per engine. Ring set for 3 ring piston. (Item #: PRS445) $98.15

No
Picture
Engine Rings - For 2510 Diesel with block numbers T23406, T24961 and T26933 Only. 4 Cylinder, 202 CID, 3.86â Std bore. One set used per engine. Ring set for 3 ring piston. (Item #: 120921, Ref: PRS451) $24.00

No
Picture
Engine Rings - For 2510 Diesel with block numbers T32342, R53250, or R55034 Only. 4 Cylinder, 202 CID, 3.86â Std bore. One set used per engine. Ring set for 3 ring piston. (Item #: PRS452) $98.15

No
Picture
Piston - For John Deere tractor models 820 (3.152 engine s/n 154765-earlier), 820 (3.152D engine s/n 154766-later), 830 (3.152D engine s/n 154766-later), 1020 (3.152 engine s/n 154765-earlier), 1020 (3.152D engine s/n 154766-later), 1030 (3.152 engine s/n 154765-earlier), 1030 (3.152D engine s/n 154766-later), 2020, 2510, Compatible with John Deere Construction and industrial models 300 (3.152 engine s/n 154765-earlier), 300 (3.152D engine s/n 154766-later), 300A (3.152 engine s/n 154765-earlier), 300A (3.152D engine s/n 154766-later), 300B (3.152D engine s/n 154766-later), 301A (3.152D engine s/n 154766-later), 350A (3.152 engine s/n 154765-earlier), 350A (3.152D engine s/n 154766-later), 350B (3.152 engine s/n 154765-earlier), 350B (3.152D engine s/n 154766-later), 380 (3.152 engine s/n 154765-earlier), 380 (3.152D engine s/n 154766-later), 400, 440, 450 (4.202 engine s/n 158257-earlier), 544, 3420 (6.303 engine s/n 158976-later), Replaces John Deere OEM number T23481, (Item #: 176711) $79.80

No
Picture
Piston Pin Bushing - For John Deere tractor models 1010, 1020, 2010, 2020, 2510, 2520, (Item #: 180092) $23.50

Exhaust System

No
Picture
Manifold Gasket Set - For gas tractor models (180, 202 power units from SN# 51230), 400 Ind., 401, 401B, 401C, 480 Forklift, 480A Forklift, 480B, 2020, 2510, 2520 all with 4 cylinder gas engines. (Item #: 107950, Ref: R4778G) $35.30

Manifold Gasket Set - This Gasket Set is used with T20249 Manifold. It replaces part numbers R90658, T20006 (Item #: 101603, Ref: R0911G) $13.30

Manifold, Vertical - Order gasket set separately, part R4778G. For tractor models 2020, 2030, 2510, 2520, 400. All with 4 cylinder gas engines. (Item #: 107943, Ref: T20247) $300.00

Manifold, Vertical Exhaust - This Diesel Manifold is used on 1830 (AG), 2011, 2020, 2030, 2035 (SPAIN), 2120, 2130, 2135, 2440, 2510, 2520, 2630, 2640, 401A, 401B, 401C, 480A, Forklift: 480B, Industrial: 310, 400, 401, 410, 480; models 4 cylinder 202, 219 or 276 cubic inch diesel engines with vertical exhaust. Does Not come with gasket. Gasket set available Part Number R0911G. (Item #: 101602, Ref: T20249) $95.00

Muffler - Vertical Exhaust Inlet I.D. - 2 1/2 - Flared Outlet O.D. - 2 1/2 Overall Length - 34 For 2510. OEM# Use R1802 Rain Cap (Item #: 101186, Ref: R1673) $63.00

Fuel System / Air Intake

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Item #: 157279, Ref: R28794) $9.00

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On John Deere, it is used on the following Carburetors TSX85, TSX89, TSX245, TSX356, TSX475, TSX485, TSX491, TSX530, TSX615, TSX688, TSX756, TSX759, TSX777, TSX788, TSX802, TSX805, TSX806, TSX808, TSX809, TSX810, TSX812, TSX823, TSX860, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX907, TSX908, TSX908SL, TSX923SL, TSX941SL, TSX944, TSX945SL, TSX952SL, TSX953SL, TSXU838, TSXU1007, USX20, USX21, USX30, USX31, USX35, USX36, USX48SL, USX49SL, USX211. These carburetors are possible on John Deere Models: M, 600, MI, MT, 320, L, 500, LA, MC, 40, 330, 420, 430, 24, 1010, 1020, 1520, 2010, 2020, 2030, 2510, 2520, 4030, 500A, 500B, 440A, LI, 440B, 99 Replaces: E10058, R10188 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carburetors used on: 1520, 2030, 2510, 2520, 4030 tractors. Zenith Carburetor replaces numbers TSX394, TSX777, TSX944, TSX944SL, TSX945SL, TSX969SL, TSXU839, TSXU995. Does not include electric shut-off. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA. 1 year warranty. (Item #: 100750, Ref: 14997) $530.00

Carburetor - New carburetor with reversible linkage. For M, MC, MT (VD Engine serial number 1000up), 40, 77 Crawler, 300 (135G), 320, 330, 350 Crawler, 1020, 2010, 2020, 2500, 2510, Combines 45 (HA145, HA165D, 145GH, 180G4H Engine), 55 (HA217 gas), 95 (303G5H, 303G6H), 8x6 and 99 Cotton Pickers, NA217, 135 G Sprayer. Replaces Marvel -Schebler numbers TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX959. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 100752, Ref: 14996) $457.00

Carburetor - This New Zenith Style Carburetor with reversible linkage. Replaces TSX245, TSX475, TSX530, TSX562, TSX615, TSX641, TSX678, TSX688, TSX689, TSX704, TSX711, TSX737, TSX756, TSX768, TSX808, TSX810, TSX819, TSX877, TSX881, TSX883, TSX885, TSX888, TSX892, TSX894, TSX895, TSX898, TSX899, TSX904, TSX904SL, TSX905, TSX905SL, TSX906, TSX906SL, TSX907, TSX908, TSX920, TSX921, TSX922, TSX923, TSX938, TSX939, TSX941, TSX945, TSX945SL, TSX959, TSXU963, TSXU9631. John Deere Part Numbers AM1613T, AM1794T, AM2067T, AM3061T, AM3227T, AM3611T, AM3611T, AM3612T, AM3612T, AM366T, AM771T, AR62244, AR67706, AT10181, AT10428, AT10576, AT11158, AT11637, AT11680, AT12357, AT13064, AT14028, AT14047, AT14095, AT14387, AT17374, AT17629, AT18036, AT18098, AT18110, AT21142, AT21183, AT21184, AT21185, AT21358, AT21411, AT21786, AT21848, AT22994, AT22997, AT23000, AT23013, AT23016, AT23132, AT23136, AT23264, AT26120, AT27783, AT359T, AT420T, AT453T, RE19402. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 183805, Ref: 14996B) $335.00

Carburetor Choke Arm - For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520, Replaces OEM number T25158, Marvel Schebler carburetors TSX904, TSX905, TSX944, TSX945, (Item #: 113489) $240.00

Carburetor Choke Shaft - For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number AT25819, T25149, For Marvel Schebler Carburetor number TSX904, TSX905, TSX944, TSX945, (Item #: 110034) $114.00

Carburetor Float - For tractor models M, MC, MT, 40, 320, 330, 420, 430, 440, 1020, 1520, 2010, 2020, 2030, 2510, 2520. All with Marvel-Schebler Carburetors: TSX245, TSX475, TSX530, TSX562, TSX641, TSX678, TSX688, TSX756, TSX808, TSX810, TSX899, TSX904, TSX904SL, TSX905, TSX905-1, TSX944SL, TSX945SL, TSXU963. Replaces OEM 30-739. (Item #: 105095, Ref: R2383) $21.00

No
Picture
Carburetor Kit - For John Deere tractor models 1020, 1520, 2020, 2510, 2520, Replaces John Deere OEM number A609073, For Marvel Schebler Carburetor number TSX904, TSX905, TSX944, TSX945, Kit contains gaskets and float valve, (Item #: 176624) $24.60

Carburetor Kit, Basic - Kit for Marvel TSXU963, TSX904SL, TSX904, TSX944, TSX944SL, TSX810, TSX808, TSX899, TSXU9631, TSX905, TSX905-1, TSX945SL, TSX475, TSX530, TSX245, TSX562, TSX641, TSX679, TSX688, TSX689, TSX678 carbs used on 1020, 1520, 2010, 2020, 2030, 2510, 2520, 320, 40, 420, 430, M. (Item #: 100734, Ref: MS102) $19.00

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX904, TSX905, TSX944, TSX945. For the following tractor models: 1020, 1520, 2020, 2030, 2510, 2520. Add $150.00 core charge to price and you will receive instructions for returning your core for a refund if you have one available. (Item #: 203295, Ref: 1527-CARB) $776.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX905, TSX945. For the following tractor models: 2020 2510, 2520. The Center-to-Center measurement on the mounting bolts is 2 5/8 inches. Add $150.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203295, Ref: 1530-CARB) $776.01

Choke Cable - For John Deere tractor models 2510, 4020, Replaces OEM number AR27301, Total Length: 44", (Item #: 155432) $69.00

Fuel Cap with Red Rubber Cover - For John Deere tractor models 50 (sn:5018450-later), 50, 60 (sn:635350-later), 60, 70, 320, 330, 420, 430, 435, 520, 530, 620, 630, 720, 730, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (sn:122999-earlier), 3020, 4000, 4010, 4020 (sn:200999-earlier), 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Compatible with John Deere Construction and industrial models 400, 440 (Crawler), 440, 480 (Loader/Backhoe), Replaces John Deere OEM number R27183, AT20911, Includes red rubber cover and gasket, Red rubber cover outer diameter: 4.040", 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center diameter, Cap is 1.375" tall, For replacement cover use Item #: 126626, (Item #: 126517) $27.00

Fuel Filter, CAV type - Fuel Filter for tractor models (3300 with 219 engine), (4400, 6600, 9900 with 329 engine and SN# up to 237162), (95 with 248 or 303 engine), (499 with 309 engine), (699 with 303 or 329 engine), 1010, 1020, 1520, (2010 SN# 42001 and up), 2020, 2030, 2510, 2520. Replaces AT17387. NOTE: verify you have CAV type filter before ordering. Replaces: AT17387. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $9.00

Fuel Injection Return - "T" Boot fuel injection return. Fits models: 1020, 1120, 2020, 2120, 2510, 3120, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 5200, 5400, 5440, 5460, 6076 Eng. SN# <576895, 6600, 6602, 6619 Eng. SN# <027969, 6620, 690B, 693B, 7440, 7700, 7720, 820, 8430, 8630, 920, 9920, 300, 350, 400, 440, 440A, 440B, 450, 480, 544, 544A, 570, 570A, 740, 743, 762. (Item #: 179682, Ref: T23425) $5.60

Fuel Injector Tee - For John Deere tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2640, 2840, 2940, 4030, Compatible with John Deere Combine (s) 925, 935, 945, 965, 965 (H), 968 (H), 975, 975 (HY4), 1032, 1042, 1052, 1055, 1065, 1068 (H), 1072, 1075, 1075 (H4), 4400, 4420, Compatible with John Deere Construction and industrial models 300B, 301A, 302, 401B, 401C, 401D, 544B, 570, 570A, Replaces John Deere OEM number AR85618, (Item #: 168653) $14.70

Fuel Pump - Fuel transfer pump, similar to original equipment manufacturer, cannot be repaired. Diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Gas tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Item #: 140647, Ref: TP-RE42211A) $27.00

Fuel Pump - This fuel pump is for diesel tractors: 830, 930, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Replaces OEM numbers AR42211B, AR49770, AR52159, DD14195, RE37482, AR102678, DD13483, RE37482, AR52729. Ports are 3/8 - 20 thread. The inlet is at 1 o'clock and outlet at 7 o'clock with the cam lever pointing toward you. The inlet and outlet can be "clocked" to a different position. Some applications may need different fittings, but thise are not supplied by Yesterday's Tractor. (Item #: 112524, Ref: TP-RE42211B) $28.00

Fuel Return Tee - This Tee sits on top of the injector and connects to the diesel return line. (Item #: 176360, Ref: AT27622) $13.20

Fuel Sending Unit - For John Deere tractor model 2510, Replaces John Deere OEM number AR38269, (Item #: 119713) $79.00

Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Item #: 122256, Ref: R34656) $13.70

Fuel Solenoid - For John Deere tractor models 1020, 1520, 2020, 2030, 2510, 2520, Replaces John Deere OEM number AR67706, AT22996, AT31877, (Item #: 150282) $205.00

Fuel Tank Cap - For tractor models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Item #: 172673, Ref: AT20911) $9.10

Fuel Transfer Pump Repair Kit - Repair kit, for fuel transfer pump RE42211, RE42211B. Used on diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. For Gas tractors : 1520, 2030, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030. (Item #: 180105, Ref: RE42211RK) $25.30

Grommet, Fuel Filler, Red - For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). Replaces R39613R, A5157R, R82873, R34193 (Item #: 113650, Ref: R39613R) $11.10

No
Picture
Hand Speed Control With Lever, Used - For John Deere tractor models 500, 600, 700, 2510, 3010 (s/n 049999), 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), 4520, 4620, 5010, 5020, 7020, 7520, Compatible with John Deere Construction and industrial models 440, 440A, 440B, 500 (s/n 123113-earlier), 540, 540A, Replaces John Deere OEM nos AR30472, Replaces John Deere Casting nos R27072, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440194) $109.01

No
Picture
Injector Nozzle Nut - For John Deere tractor models 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2510, 2520, 2640, 2750, 2840, 2940, 4030, 4040, 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5200, 5210, 5300, 5310, 5400, 6030, 7020, 7200, 7210, 7400, 7410, 7510, 7520, 7600, 7700, 7710, 7800, 7810, 8100, 8200, 8300, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 9100, Compatible with John Deere Combine (s) CTS, 925, 935, 945, 955, 965, 975, 985, 1032, 1042, 1052, 1055, 1065, 1072, 1075, 1085, 1133, 1144, 1155, 1157, 1158, 1166, 1177, 1188, 1188H4, 4400, 4420, 4425, 4435, 6620, 7720, 8820, 9400, 9450, 9500, 9500 SH, 9510, 9510 SH, 9550, 9550 SH, 9600, 9610, 9650, Replaces John Deere OEM number R51937, (Item #: 176692) $3.90

No
Picture
Injector Packing Washer - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3020, 4000, 4020, 4030, 4520, Compatible with John Deere Combine (s) 3300, 4400, 4420, 6600, 7700, Replaces John Deere OEM number R34764, Inside Diameter: .380", Outside Diameter: .565", Thickness: .128", (Item #: 176691) $1.20

Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Item #: 168690, Ref: AF3583R) $28.00

Red Rubber Cover Only - For John Deere tractor models 50 (s/n 5018450-later), 60 (s/n 635350-later), 70 (gas), 320, 330, 420, 430, 435, 480, 520, 530, 620, 630, 720, 730, 820 (3 Cylinder), 830 (3 Cylinder), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (s/n 122999-earlier), 4000, 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Replaces John Deere OEM number R27183, For fuel cap with cover use Item #: 126517, (Item #: 126626) $18.50

Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Item #: 178588, Ref: AA5302R) $17.30

Throttle Knob - Plastic. For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 5020, 7020. (Item #: 125658, Ref: R26670) $6.50

Gauges

Fuel Gauge, 12V - This Fuel Gauge is 12 Volt Negative ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 5010, (5020 up to SN# 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Negative Ground or it will not work and damage the gauge. Housing depth is 1.205 inches. (Item #: 155405, Ref: R34262) $39.00

Fuel Gauge, 12V - 12 Volt Positive ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to Serial Number 122999), 4010, (4020 up to Serial Number 200999), 5010, (5020 up to Serial Number 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Positive Ground or it will not work and damage the gauge. (Item #: 160956, Ref: R34262P) $47.80

Fuel Gauge - 12V Negative Ground - 2 prong - For John Deere tractor models 2010, 2510, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), 5010, 5020 (s/n 24999-earlier), Replaces John Deere OEM number RE53664, R34262, AT27153, AR46271, For 12 volt negative ground generator systems, For 12V Negative Ground Alternator Systems use Item #: 155405, (Item #: 140623) $38.60

Tachometer Cable - For John Deere tractor models 2510, 2520, Replaces John Deere OEM number AR38341, Length: 22", (Item #: 121544) $19.50

Tachometer Knob - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number AR40802, AR30282, (Item #: 126743) $11.00

Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853 (Item #: 117361, Ref: RE206853) $95.00

Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas and Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Item #: 121304, Ref: RE206854) $116.00

Tachometer With White Needle - This tachometer with white needle has provision for fiber optic light and illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853. (Item #: 121302, Ref: AR50404) $98.00

Tachometer With White Needle - This tachometer with white needle has a provision for fiber optic light and illumination. It is used on the following Gas and Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Item #: 121626, Ref: AR50405) $137.00

No
Picture
Transmission Oil Pressure Gauge - JD Power Shift Transmission Pressure Gauge for JD 600 Industrial, 500, 2510, 3020 up to SN # 122999, 4020 up to SN # 200999, 500A up to SN # 123113 Replaces: R34259. Measures 2.030 inches OD and 1/8 inch NPT male thread. (Item #: 160955, Ref: R34259) $49.30

Transmission Oil Temperature Gauge - For tractor models 2510, (3020 up to SN# 122999), (4020 up to SN# 200999). (Item #: 108065, Ref: R34258) $42.90

Water Temperature Gauge - This water temperature gauge has a 29inch lead. Max temperature is 250 degrees and minimum is 100 degrees. It has no provision for fiber optic light. It has a 2.045 inch housing diameter and a 2.324 inch bezel diameter. Fits John Deere - [ 2510, 5010 (For Gas and Diesel through 1968) ], 3020 (For gas and Diesel through 1968 (up to SN: 122999)), 4020 (For gas and Diesel through 1968 (up to SN: 200999)), 5020 (For Gas and Diesel through 1968 (up to SN: 024999)); Replaces: AR36383, R34263 (Item #: 108061, Ref: R34263) $38.00

Hitch / Drawbar

Center Link Body Only - For John Deere tractor models 2510, 2520, 3010, 3020, 4000 (s/n 201000-later), 4010, 4020, 4020 (s/n 201000-later), 4030, 4230, 4520, 5010, 5020, Replaces John Deere OEM number R47524, R26811, Length: 10.75", Thread: 1.250"- 7, UNC LH/RH, (Item #: 170288) $96.00

Center Link Bracket, Used - For John Deere tractor models 2510, 2520, 3020, 4000, 4020, 4030, 4230, Replaces John Deere OEM nos R39759, R33860, Replaces Casting nos R31620, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498955) $25.01

Center Link Handle - For John Deere tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Compatible with John Deere Construction and industrial models 500, 600, 700A, Replaces John Deere OEM number R42495, R27007, (Item #: 164548) $9.80

Center Link Hook, Used - For John Deere tractor models 2510, 2520 (s/n 022001-earlier), 3010 (s/n 150001-earlier), 4010, 4020 (s/n 250001-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4650, 4850, Replaces John Deere OEM number R53762, R26811, R26901, R32119, R47072, Transport Hook, 5" Long, 0.325" Diameter, For a new version of this item use Item #: 114007, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435634) $2.76

Drawbar - For John Deere tractor models 2510 (Row-Crop), 2520 (Row-Crop), 3010, Replaces John Deere OEM number R27692, 45.00" long, 2.00" Wide, 1.25" Thick, 1.875" Offset, Four .765" diameter holes @ 1.440", 2.440", 7.440" and 12.690" from front, (Item #: 112181) $195.00

Drawbar Hammerstrap Pin - T-Shaped Pin measures 6.181 inches long and 1.248 inch diameter. Also replaces AR937R. For tractor models using this pin: 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555. (Item #: 128172, Ref: AR69988) $23.40

Drawbar, Offset - 2.50 Offset - Heavy Duty 1.250 x 2.50 x 44.750 (1.010" Holes at 1.060, 2.310, 4.360, 7.050, 9.050 and 12.30 inches). For 2510, 2520, 4000, 4010, 4020, 4030HD, Hi-Crop 3020, 4010 HD Hi-Crop, HD Row Crop with Std Wide Swing. (Item #: 121854, Ref: R81576) $138.00

Drawbar, Offset - 2.50" Offset. Size is 1.250" x 2.50" x 44.750" Bar has 1.010" Holes at 1.060 and 2.310 and 4.360 and 7.050 and 9.050 and 12.30 inches. For 2510 Hi-Crop, Row Crop Wide Swing, 2520 Hi-Crop, Row Crop Wide Swing, 3010 Row Crop, Std Wide Swing, 3020 Rop Crop, Orchard, 4000 Hi-Crop, 4010 Row Crop, 4010 Row Crop with Wide Swing, 4020 Hi-Crop, 4030 Row Crop. *An additional $10 shipping charge applies due to weight/size. (Item #: 110260, Ref: RE20662) $148.00

Drawbar Pin, Front - For tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030. All Hi-crop or Row-crop models. (Item #: 121855, Ref: AR27599) $41.90

Drawbar Pin, Front - Used on John Deere 2510 Row Crop, 2520 Row Crop and 3010 tractors, the diameter of this pin is 0.750 inches. Replaces John Deere part number AR26415 (Item #: 128126, Ref: AR26415) $34.10

Drawbar Pin, Front - Used with Wide Swinging Drawbar on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. 3.307 inches overall length, 2.323 inches shank length, 1.25 inch diameter, 1 inch shank diameter. (Item #: 121853, Ref: R56728) $18.10

Drawbar, Used - For John Deere tractor models 2510 (Row Crop Wide-Swing), 2520 (Row Crop Wide-Swing), 3010 (Row Crop Wide-Swing), 3020 (Row Crop Wide-Swing), 4010 (Row Crop Wide-Swing), 4020, 4030 (Row Crop), Replaces John Deere OEM number R28057, R34288, RE20662, Length: 44.750", Width: 2-1/2", Thickness: 1.250", Offset: 2.50", For a new version of this item use Item #: 110260, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410260) $79.01

No
Picture
Drawbar, Used - For John Deere tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030, Compatible with John Deere Construction and industrial models 500C, Replaces John Deere OEM number R81576, Length: 44.750", Width: 2.50", Thickness: 1.250", Offset: 2.50", (6) 1.010" dia holes @ 1.060", 2.310", 4.360", 7.050", 9.050", and 12.300" from front, Heavy Duty, For a new version of this item use Item #: 121854, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421854) $78.01

Front Drawbar Dowel Pin - This Dowel Pin is 3 inches long with a 0.75 inch diameter. Used on John Deere 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121851, Ref: R26503) $6.20

No
Picture
Front Drawbar Dowel Pin, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, Replaces John Deere OEM number R56728, Overall Length: 3.307", Shank Length: 2.323", Diameter: 1.25", Shank Diameter: 1", For a new version of this item use Item #: 121853, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435795) $10.01

Front Drawbar Pin - Used on John Deere models 2510, 2520, 3020, 4000, 4020, 4030 serial number 007442 and before, 4230 serial number 015452 and before, 4320, 4430 serial number 021269 and before, 500, 500A, 500C serial number 192951 and before, 600. This Pin has a 1 inch diameter. Replace John Deere part numbers AR44189, AR32826 (Item #: 115536, Ref: AR44189) $34.70

Front Drawbar Support Mounting Pin Bushing - Used on John Deere models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 500, 500A, 500C, 600, this bushing replaces OEM numbers R31438, R27325 (Item #: 114095, Ref: R31438) $5.40

Front Pull Arm, LH - Left Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Item #: 110985, Ref: AR32548) $272.00

Front Pull Arm Pin - For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s/n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s/n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020, Replaces John Deere OEM number R26609, (Item #: 114090) $11.80

No
Picture
Front Pull Arm Pin, Used - For John Deere tractor models 2510 (Hi-Crop), 2520 (Hi-Crop), 3010, 3020 (Hi-Crop), 4000 (Hi-Crop), 4010 (STD, Row Crop, Hi-Crop), 4020 (Hi-Crop), 4050 (s/n 1000-6509 Hi-Crop), 4230 (Hi-Crop), 4240 (Hi-Crop), 4250 (s/n 1000- Hi-Crop), 4255 (Hi-Crop), 4320, 4430 (Hi-Crop), 4440 (Hi-Crop), 4520, 4620, 5010, 5020 (025000>), 6030, 7020, Replaces John Deere OEM number R26609, For a new version of this item use Item #: 114090, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435641) $7.01

Front Pull Arm, RH - Right Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Item #: 110986, Ref: AR32547) $299.00

Front Pull Arm Washer - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, (Item #: 121442) $14.90

No
Picture
Front Pull Arm Washer, Used - For John Deere tractor models 2510, 2530, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, Replaces John Deere OEM number R26608, For a new version of this item use Item #: 121442, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435774) $8.26

Hydraulic Cylinder Hanger, LH, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 5020, Replaces John Deere OEM nos R32118, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498953) $20.01

Leveling Link Adjusting Shaft - Used on John Deere 2010, 2510, 3010, 3020, 4010, 4020, 600, this part replaces John Deere part number T13859 (Item #: 111630) $40.00

Lift Arm Adjusting Handle - Used on John Deere 2010, 2510, 3010, 3020 (up to serial number 122999), 4010, 4020 (up to serial number 200999), 600. This part replaces T13858 (Item #: 110130) $20.30

No
Picture
Lift Arm Latch, Used - For John Deere tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020, 3030, 3040, 3055, 3120, 3130, 3140, 4000, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4455, Replaces John Deere OEM number AR90082, AR69317, AR30288, For a new version of this item use Item #: 108518, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435398) $27.01

Lift Link Rod - Rod is 25 5/8 inches in length. For 2510, 3010, 3020, 4010, 4020, 600. Verify length needed. (Item #: 110577, Ref: R26611) $85.00

No
Picture
Lift Link Rod - For John Deere tractor models 2510, 3020, 4020, Replaces John Deere OEM number R34476, Length: 38 5/16", (Item #: 176688) $133.00

Lift Link Seal - For John Deere tractor models 2510, 3010, 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Replaces John Deere OEM number AR26616, Inside Diameter; 1", Outside Diameter: 1.503", (Item #: 110138) $7.00

No
Picture
Load Control Shaft - Shaft is 20.937 inches long and 1 inch diameter. For tractor models 500, 2510, 2520, 3010, 3020, 4030. (Item #: 128555, Ref: R33883) $95.00

No
Picture
Load Control Shaft Bushing - Bushing with O-Ring. For tractor models 500, 2510, 2520, 3010, 3020, 4030. Also available in oversizes .003, .006 and .030. State size required in comments section of order form if oversize is required. 2 required per tractor. (Item #: 113995, Ref: R27018_) $15.60

Load Control Shaft Retainer - For John Deere tractor models 2510, 3010 (s/n 049999-earlier), 3020 (s/n 122999-earlier), Compatible with John Deere Construction and industrial models 500, 500A, Replaces John Deere OEM number R33884, R28125, (Item #: 167359) $24.00

Load Control Shaft Seal - 2 Seals required per tractor. For tractor models 500, 2510, 2520, 3010, 3020, 4030 (Item #: 115050, Ref: AR27371) $6.50

Load Control Shaft, Used - For John Deere tractor models 500, 600, 2510, 3010 (s/n 049999-earlier), 3020 (s/n 122999-earlier), 4010, 4020 (s/n 200999-earlier), Compatible with John Deere Construction and industrial models 500A (s/n 123113-earlier), Replaces John Deere OEM nos R26630, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444803) $32.01

Load Control Shaft, Used - For John Deere tractor models 2510, 2520, 3010, 3020, 4030, Compatible with John Deere Construction and industrial models 500, Replaces John Deere OEM number R33883, R27017, For a new version of this item use Item #: 128555, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435942) $50.01

Load Control Shims - For John Deere tractor models 2510, 2520, 3010, 3020, 4030, Compatible with John Deere Construction and industrial models 500, 500A, 500C, Replaces John Deere OEM number R66425, (Item #: 140546) $19.30

Lower Front Drawbar Pin Bushing - The measurements on the bushing are 1.565 inches outside diameter, and 1.031 inches inside diameter. This bushing is used with front drawbar systems on John Deere models: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455 (Item #: 121852, Ref: R40558) $8.90

Lower Lift Link Housing Yoke - For John Deere tractor models 2510, 3010, 3020 (Early), 4010, 4020 (Early), Compatible with John Deere Construction and industrial models 600, Replaces John Deere OEM number R26615, (Item #: 110512) $139.00

Lower Lift Link Pin - For John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030 (s/n 6719-earlier), 4230 (s/n 13087-earlier), 4320, 4430 (s/n 17613-earlier), 4455, Replaces John Deere OEM number R54170, R26618, (Item #: 164340) $6.50